* [PATCH V2] tty: serial: imx: allow breaks to be received when using dma
@ 2018-02-09 21:22 Troy Kisky
2018-02-10 1:09 ` Fabio Estevam
2018-02-20 18:01 ` Martin Hicks
0 siblings, 2 replies; 3+ messages in thread
From: Troy Kisky @ 2018-02-09 21:22 UTC (permalink / raw)
To: gregkh
Cc: mort, Troy Kisky, linux-serial, u.kleine-koenig, fabio.estevam,
linux-arm-kernel, l.stach
This allows me to login after sending a break when service
serial-getty@ttymxc0.service is running
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
---
v2: rebase only
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 1d7ca382bc12..2eb8c4a20d68 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -927,7 +927,6 @@ static void dma_rx_callback(void *data)
status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
if (status == DMA_ERROR) {
- dev_err(sport->port.dev, "DMA transaction error.\n");
clear_rx_errors(sport);
return;
}
@@ -1028,6 +1027,7 @@ static int start_rx_dma(struct imx_port *sport)
static void clear_rx_errors(struct imx_port *sport)
{
+ struct tty_port *port = &sport->port.state->port;
unsigned int status_usr1, status_usr2;
status_usr1 = readl(sport->port.membase + USR1);
@@ -1036,12 +1036,18 @@ static void clear_rx_errors(struct imx_port *sport)
if (status_usr2 & USR2_BRCD) {
sport->port.icount.brk++;
writel(USR2_BRCD, sport->port.membase + USR2);
- } else if (status_usr1 & USR1_FRAMERR) {
- sport->port.icount.frame++;
- writel(USR1_FRAMERR, sport->port.membase + USR1);
- } else if (status_usr1 & USR1_PARITYERR) {
- sport->port.icount.parity++;
- writel(USR1_PARITYERR, sport->port.membase + USR1);
+ if (tty_insert_flip_char(port, 0, TTY_BREAK) == 0)
+ sport->port.icount.buf_overrun++;
+ tty_flip_buffer_push(port);
+ } else {
+ dev_err(sport->port.dev, "DMA transaction error.\n");
+ if (status_usr1 & USR1_FRAMERR) {
+ sport->port.icount.frame++;
+ writel(USR1_FRAMERR, sport->port.membase + USR1);
+ } else if (status_usr1 & USR1_PARITYERR) {
+ sport->port.icount.parity++;
+ writel(USR1_PARITYERR, sport->port.membase + USR1);
+ }
}
if (status_usr2 & USR2_ORE) {
--
2.14.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH V2] tty: serial: imx: allow breaks to be received when using dma
2018-02-09 21:22 [PATCH V2] tty: serial: imx: allow breaks to be received when using dma Troy Kisky
@ 2018-02-10 1:09 ` Fabio Estevam
2018-02-20 18:01 ` Martin Hicks
1 sibling, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2018-02-10 1:09 UTC (permalink / raw)
To: Troy Kisky
Cc: Greg Kroah-Hartman, mort, linux-serial, Uwe Kleine-König,
Fabio Estevam,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Lucas Stach
Hi Troy,
On Fri, Feb 9, 2018 at 7:22 PM, Troy Kisky
<troy.kisky@boundarydevices.com> wrote:
> This allows me to login after sending a break when service
> serial-getty@ttymxc0.service is running
Please improve the commit log by explaining why this patch fixes the issue.
Thanks
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH V2] tty: serial: imx: allow breaks to be received when using dma
2018-02-09 21:22 [PATCH V2] tty: serial: imx: allow breaks to be received when using dma Troy Kisky
2018-02-10 1:09 ` Fabio Estevam
@ 2018-02-20 18:01 ` Martin Hicks
1 sibling, 0 replies; 3+ messages in thread
From: Martin Hicks @ 2018-02-20 18:01 UTC (permalink / raw)
To: Troy Kisky
Cc: gregkh, mort, linux-serial, u.kleine-koenig, fabio.estevam,
linux-arm-kernel, l.stach
On Fri, Feb 09, 2018 at 01:22:40PM -0800, Troy Kisky wrote:
> This allows me to login after sending a break when service
> serial-getty@ttymxc0.service is running
>
> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Tested-by: Martin Hicks <mort@bork.org>
Works for me.
mh
>
> ---
> v2: rebase only
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 1d7ca382bc12..2eb8c4a20d68 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -927,7 +927,6 @@ static void dma_rx_callback(void *data)
> status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
>
> if (status == DMA_ERROR) {
> - dev_err(sport->port.dev, "DMA transaction error.\n");
> clear_rx_errors(sport);
> return;
> }
> @@ -1028,6 +1027,7 @@ static int start_rx_dma(struct imx_port *sport)
>
> static void clear_rx_errors(struct imx_port *sport)
> {
> + struct tty_port *port = &sport->port.state->port;
> unsigned int status_usr1, status_usr2;
>
> status_usr1 = readl(sport->port.membase + USR1);
> @@ -1036,12 +1036,18 @@ static void clear_rx_errors(struct imx_port *sport)
> if (status_usr2 & USR2_BRCD) {
> sport->port.icount.brk++;
> writel(USR2_BRCD, sport->port.membase + USR2);
> - } else if (status_usr1 & USR1_FRAMERR) {
> - sport->port.icount.frame++;
> - writel(USR1_FRAMERR, sport->port.membase + USR1);
> - } else if (status_usr1 & USR1_PARITYERR) {
> - sport->port.icount.parity++;
> - writel(USR1_PARITYERR, sport->port.membase + USR1);
> + if (tty_insert_flip_char(port, 0, TTY_BREAK) == 0)
> + sport->port.icount.buf_overrun++;
> + tty_flip_buffer_push(port);
> + } else {
> + dev_err(sport->port.dev, "DMA transaction error.\n");
> + if (status_usr1 & USR1_FRAMERR) {
> + sport->port.icount.frame++;
> + writel(USR1_FRAMERR, sport->port.membase + USR1);
> + } else if (status_usr1 & USR1_PARITYERR) {
> + sport->port.icount.parity++;
> + writel(USR1_PARITYERR, sport->port.membase + USR1);
> + }
> }
>
> if (status_usr2 & USR2_ORE) {
> --
> 2.14.1
>
--
Martin Hicks P.Eng. | mort@bork.org
Bork Consulting Inc. | +1 (613) 266-2296
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-02-20 18:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-09 21:22 [PATCH V2] tty: serial: imx: allow breaks to be received when using dma Troy Kisky
2018-02-10 1:09 ` Fabio Estevam
2018-02-20 18:01 ` Martin Hicks
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).