[PATCH AUTOSEL 4.19 028/258] serial: fsl_lpuart: clear parity enable bit when disable parity

[PATCH AUTOSEL 4.19 028/258] serial: fsl_lpuart: clear parity enable bit when disable parity

[Sasha Levin]

From: Andy Duan <fugang.duan@nxp.com>

[ Upstream commit 397bd9211fe014b347ca8f95a8f4e1017bac1aeb ]

Current driver only enable parity enable bit and never clear it
when user set the termios. The fix clear the parity enable bit when
PARENB flag is not set in termios->c_cflag.

Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Andy Duan <fugang.duan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/fsl_lpuart.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 3f8d1274fc85..7d030c2e42ff 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1477,6 +1477,8 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
 			else
 				cr1 &= ~UARTCR1_PT;
 		}
+	} else {
+		cr1 &= ~UARTCR1_PE;
 	}
 
 	/* ask the core to calculate the divisor */
@@ -1688,6 +1690,8 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 			else
 				ctrl &= ~UARTCTRL_PT;
 		}
+	} else {
+		ctrl &= ~UARTCTRL_PE;
 	}
 
 	/* ask the core to calculate the divisor */
-- 
2.19.1

[PATCH AUTOSEL 4.19 162/258] serial: sh-sci: Fix locking in sci_submit_rx()

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit dd1f2250da95e87cb3e612858f94b14f99445a7c ]

Some callers of sci_submit_rx() hold the port spinlock, others don't.
During fallback to PIO, the driver needs to obtain the port spinlock.
If the lock was already held, spinlock recursion is detected, causing a
deadlock: BUG: spinlock recursion on CPU#0.

Fix this by adding a flag parameter to sci_submit_rx() for the caller to
indicate the port spinlock is already held, so spinlock recursion can be
avoided.

Move the spin_lock_irqsave() up, so all DMA disable steps are protected,
which is safe as the recently introduced dmaengine_terminate_async() can
be called in atomic context.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/sh-sci.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index effba6ce0caa..5fdd7944b73b 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1331,7 +1331,7 @@ static void sci_tx_dma_release(struct sci_port *s)
 	dma_release_channel(chan);
 }
 
-static void sci_submit_rx(struct sci_port *s)
+static void sci_submit_rx(struct sci_port *s, bool port_lock_held)
 {
 	struct dma_chan *chan = s->chan_rx;
 	struct uart_port *port = &s->port;
@@ -1362,16 +1362,18 @@ static void sci_submit_rx(struct sci_port *s)
 	return;
 
 fail:
+	/* Switch to PIO */
+	if (!port_lock_held)
+		spin_lock_irqsave(&port->lock, flags);
 	if (i)
 		dmaengine_terminate_async(chan);
 	for (i = 0; i < 2; i++)
 		s->cookie_rx[i] = -EINVAL;
 	s->active_rx = -EINVAL;
-	/* Switch to PIO */
-	spin_lock_irqsave(&port->lock, flags);
 	s->chan_rx = NULL;
 	sci_start_rx(port);
-	spin_unlock_irqrestore(&port->lock, flags);
+	if (!port_lock_held)
+		spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void work_fn_tx(struct work_struct *work)
@@ -1491,7 +1493,7 @@ static enum hrtimer_restart rx_timer_fn(struct hrtimer *t)
 	}
 
 	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
-		sci_submit_rx(s);
+		sci_submit_rx(s, true);
 
 	/* Direct new serial port interrupts back to CPU */
 	scr = serial_port_in(port, SCSCR);
@@ -1617,7 +1619,7 @@ static void sci_request_dma(struct uart_port *port)
 		s->chan_rx_saved = s->chan_rx = chan;
 
 		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
-			sci_submit_rx(s);
+			sci_submit_rx(s, false);
 	}
 }
 
@@ -1667,7 +1669,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 			scr |= SCSCR_RDRQE;
 		} else {
 			scr &= ~SCSCR_RIE;
-			sci_submit_rx(s);
+			sci_submit_rx(s, false);
 		}
 		serial_port_out(port, SCSCR, scr);
 		/* Clear current interrupt */
-- 
2.19.1

[PATCH AUTOSEL 4.19 163/258] serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 71ab1c0336c71ace5725740f200beca9667a339f ]

On (H)SCIF, sci_submit_rx() is called in the receive interrupt handler.
Hence if DMA submission fails, the interrupt handler should resume
handling reception using PIO, else no more data is received.

Make sci_submit_rx() return an error indicator, so the receive interrupt
handler can act appropriately.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/sh-sci.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 5fdd7944b73b..c6e8ca2e5f7d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1331,7 +1331,7 @@ static void sci_tx_dma_release(struct sci_port *s)
 	dma_release_channel(chan);
 }
 
-static void sci_submit_rx(struct sci_port *s, bool port_lock_held)
+static int sci_submit_rx(struct sci_port *s, bool port_lock_held)
 {
 	struct dma_chan *chan = s->chan_rx;
 	struct uart_port *port = &s->port;
@@ -1359,7 +1359,7 @@ static void sci_submit_rx(struct sci_port *s, bool port_lock_held)
 	s->active_rx = s->cookie_rx[0];
 
 	dma_async_issue_pending(chan);
-	return;
+	return 0;
 
 fail:
 	/* Switch to PIO */
@@ -1374,6 +1374,7 @@ static void sci_submit_rx(struct sci_port *s, bool port_lock_held)
 	sci_start_rx(port);
 	if (!port_lock_held)
 		spin_unlock_irqrestore(&port->lock, flags);
+	return -EAGAIN;
 }
 
 static void work_fn_tx(struct work_struct *work)
@@ -1668,8 +1669,10 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 			disable_irq_nosync(irq);
 			scr |= SCSCR_RDRQE;
 		} else {
+			if (sci_submit_rx(s, false) < 0)
+				goto handle_pio;
+
 			scr &= ~SCSCR_RIE;
-			sci_submit_rx(s, false);
 		}
 		serial_port_out(port, SCSCR, scr);
 		/* Clear current interrupt */
@@ -1681,6 +1684,8 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 
 		return IRQ_HANDLED;
 	}
+
+handle_pio:
 #endif
 
 	if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0) {
-- 
2.19.1

[PATCH AUTOSEL 4.19 164/258] tty: serial: samsung: Properly set flags in autoCTS mode

[Sasha Levin]

From: Beomho Seo <beomho.seo@samsung.com>

[ Upstream commit 31e933645742ee6719d37573a27cce0761dcf92b ]

Commit 391f93f2ec9f ("serial: core: Rework hw-assited flow control support")
has changed the way the autoCTS mode is handled.

According to that change, serial drivers which enable H/W autoCTS mode must
set UPSTAT_AUTOCTS to prevent the serial core from inadvertently disabling
TX. This patch adds proper handling of UPSTAT_AUTOCTS flag.

Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
[mszyprow: rephrased commit message]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/samsung.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 2f8fa184aafa..c6058b52d5d5 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1365,11 +1365,14 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	wr_regl(port, S3C2410_ULCON, ulcon);
 	wr_regl(port, S3C2410_UBRDIV, quot);
 
+	port->status &= ~UPSTAT_AUTOCTS;
+
 	umcon = rd_regl(port, S3C2410_UMCON);
 	if (termios->c_cflag & CRTSCTS) {
 		umcon |= S3C2410_UMCOM_AFC;
 		/* Disable RTS when RX FIFO contains 63 bytes */
 		umcon &= ~S3C2412_UMCON_AFC_8;
+		port->status = UPSTAT_AUTOCTS;
 	} else {
 		umcon &= ~S3C2410_UMCOM_AFC;
 	}
-- 
2.19.1