* [PATCH serial v2] sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()
@ 2019-03-09 2:50 Mao Wenan
2019-03-11 7:46 ` Dan Carpenter
0 siblings, 1 reply; 3+ messages in thread
From: Mao Wenan @ 2019-03-09 2:50 UTC (permalink / raw)
To: gregkh, jslaby, linux-serial, linux-kernel, kernel-janitors, vz
Add the missing uart_unregister_driver() and i2c_del_driver() before return
from sc16is7xx_init() in the error handling case.
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
---
v1->v2: fix compile warning if CONFIG_SERIAL_SC16IS7XX_SPI is not exist.
drivers/tty/serial/sc16is7xx.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 268098681856..b9e5941ce767 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1509,7 +1509,7 @@ static int __init sc16is7xx_init(void)
ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver);
if (ret < 0) {
pr_err("failed to init sc16is7xx i2c --> %d\n", ret);
- return ret;
+ goto err_i2c;
}
#endif
@@ -1517,10 +1517,20 @@ static int __init sc16is7xx_init(void)
ret = spi_register_driver(&sc16is7xx_spi_uart_driver);
if (ret < 0) {
pr_err("failed to init sc16is7xx spi --> %d\n", ret);
- return ret;
+ goto err_spi;
}
#endif
return ret;
+
+#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
+err_spi:
+#endif
+#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
+ i2c_del_driver(&sc16is7xx_i2c_uart_driver);
+err_i2c:
+#endif
+ uart_unregister_driver(&sc16is7xx_uart);
+ return ret;
}
module_init(sc16is7xx_init);
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH serial v2] sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()
2019-03-09 2:50 [PATCH serial v2] sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init() Mao Wenan
@ 2019-03-11 7:46 ` Dan Carpenter
[not found] ` <9f611db1-11e3-9e9b-e7f3-d3dcc83b57f7@huawei.com>
0 siblings, 1 reply; 3+ messages in thread
From: Dan Carpenter @ 2019-03-11 7:46 UTC (permalink / raw)
To: Mao Wenan; +Cc: gregkh, jslaby, linux-serial, linux-kernel, kernel-janitors, vz
On Sat, Mar 09, 2019 at 10:50:37AM +0800, Mao Wenan wrote:
> Add the missing uart_unregister_driver() and i2c_del_driver() before return
> from sc16is7xx_init() in the error handling case.
>
> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
> Signed-off-by: Mao Wenan <maowenan@huawei.com>
> ---
> v1->v2: fix compile warning if CONFIG_SERIAL_SC16IS7XX_SPI is not exist.
> drivers/tty/serial/sc16is7xx.c | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> index 268098681856..b9e5941ce767 100644
> --- a/drivers/tty/serial/sc16is7xx.c
> +++ b/drivers/tty/serial/sc16is7xx.c
> @@ -1509,7 +1509,7 @@ static int __init sc16is7xx_init(void)
> ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver);
> if (ret < 0) {
> pr_err("failed to init sc16is7xx i2c --> %d\n", ret);
> - return ret;
> + goto err_i2c;
> }
> #endif
>
> @@ -1517,10 +1517,20 @@ static int __init sc16is7xx_init(void)
> ret = spi_register_driver(&sc16is7xx_spi_uart_driver);
> if (ret < 0) {
> pr_err("failed to init sc16is7xx spi --> %d\n", ret);
> - return ret;
> + goto err_spi;
> }
> #endif
> return ret;
> +
> +#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
> +err_spi:
> +#endif
> +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
> + i2c_del_driver(&sc16is7xx_i2c_uart_driver);
> +err_i2c:
> +#endif
> + uart_unregister_driver(&sc16is7xx_uart);
> + return ret;
This is quite ulgy. Why not create two functions:
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 635178cf3eed..9986cb2479ad 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1491,6 +1491,21 @@ static struct i2c_driver sc16is7xx_i2c_uart_driver = {
.id_table = sc16is7xx_i2c_id_table,
};
+static int __init register_sc16is7xx_i2c(void)
+{
+ return i2c_add_driver(&sc16is7xx_i2c_uart_driver);
+}
+
+static void __exit del_sc16is7xx_i2c(void)
+{
+ i2c_del_driver(&sc16is7xx_i2c_uart_driver);
+}
+
+#else
+
+static int __init register_sc16is7xx_i2c(void) { return 0; }
+static void __exit del_sc16is7xx_i2c(void) {}
+
#endif
static int __init sc16is7xx_init(void)
Then you can remove all the ifdefs.
regards,
dan carpenter
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-03-11 9:24 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-03-09 2:50 [PATCH serial v2] sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init() Mao Wenan
2019-03-11 7:46 ` Dan Carpenter
[not found] ` <9f611db1-11e3-9e9b-e7f3-d3dcc83b57f7@huawei.com>
2019-03-11 9:24 ` Dan Carpenter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).