From: "Pali Rohár" <pali@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Andrew Lunn" <andrew@lunn.ch>,
"Gregory Clement" <gregory.clement@bootlin.com>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
"Vladimir Vid" <vladimir.vid@sartura.hr>,
"Marek Behún" <kabel@kernel.org>,
linux-clk@vger.kernel.org, linux-serial@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v5 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it
Date: Wed, 22 Sep 2021 12:54:32 +0200 [thread overview]
Message-ID: <20210922105433.11744-6-pali@kernel.org> (raw)
In-Reply-To: <20210922105433.11744-1-pali@kernel.org>
This change defines DT node for UART clock "marvell,armada-3700-uart-clock"
and use this UART clock as a base clock for all UART devices.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
arch/arm64/boot/dts/marvell/armada-3720-db.dts | 4 ++++
.../boot/dts/marvell/armada-3720-espressobin.dtsi | 4 ++++
.../boot/dts/marvell/armada-3720-turris-mox.dts | 4 ++++
arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 4 ++++
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 15 +++++++++++++--
5 files changed, 29 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 3e5789f37206..accf014a6a1e 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -191,6 +191,10 @@
};
};
+&uartclk {
+ status = "okay";
+};
+
/*
* Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
* an FTDI (also on CON24(V2.0)/CON26(V1.4)).
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index 5fc613d24151..d03c7cdfbfb3 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -117,6 +117,10 @@
};
};
+&uartclk {
+ status = "okay";
+};
+
/* Exported on the micro USB connector J5 through an FTDI */
&uart0 {
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 04da07ae4420..fb85adc8657d 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -157,6 +157,10 @@
status = "disabled";
};
+&uartclk {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index 95d46e8d081c..c8217440b8dd 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -183,6 +183,10 @@
phy-names = "usb2-utmi-otg-phy";
};
+&uartclk {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 9acc5d2b5a00..5bc61c9615f5 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -132,10 +132,21 @@
reg = <0x11500 0x40>;
};
+ uartclk: uartclk@12000 {
+ compatible = "marvell,armada-3700-uart-clock";
+ reg = <0x12010 0x4>, <0x12210 0x4>;
+ clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+ <&tbg 3>, <&xtalclk>;
+ clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S",
+ "TBG-B-S", "xtal";
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "marvell,armada-3700-uart";
reg = <0x12000 0x18>;
- clocks = <&xtalclk>;
+ clocks = <&uartclk 0>;
interrupts =
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
@@ -147,7 +158,7 @@
uart1: serial@12200 {
compatible = "marvell,armada-3700-uart-ext";
reg = <0x12200 0x30>;
- clocks = <&xtalclk>;
+ clocks = <&uartclk 1>;
interrupts =
<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
--
2.20.1
next prev parent reply other threads:[~2021-09-22 10:56 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-22 10:54 [RESEND PATCH v5 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2021-09-22 10:54 ` [RESEND PATCH v5 1/6] math64: New DIV_U64_ROUND_CLOSEST helper Pali Rohár
2021-09-22 10:54 ` [RESEND PATCH v5 2/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-09-22 10:54 ` [RESEND PATCH v5 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-09-27 20:17 ` Rob Herring
2021-09-27 20:34 ` Pali Rohár
2021-09-28 17:57 ` Rob Herring
2021-09-27 20:45 ` Pali Rohár
2021-09-28 17:55 ` Rob Herring
2021-09-22 10:54 ` [RESEND PATCH v5 4/6] dt-bindings: mvebu-uart: update information about UART clock Pali Rohár
2021-09-22 10:54 ` Pali Rohár [this message]
2021-09-22 15:16 ` [RESEND PATCH v5 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Gregory CLEMENT
2021-09-22 16:07 ` Pali Rohár
2021-09-22 10:54 ` [RESEND PATCH v5 6/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210922105433.11744-6-pali@kernel.org \
--to=pali@kernel.org \
--cc=andrew@lunn.ch \
--cc=gregkh@linuxfoundation.org \
--cc=gregory.clement@bootlin.com \
--cc=kabel@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=vladimir.vid@sartura.hr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).