[PATCH V6 1/5] tty: serial: meson: Move request the register region to probe

[Yu Tu <yu.tu@amlogic.com>]

This simplifies resetting the UART controller during probe
and will make it easier to integrate the common clock code
which will require the registers at probe time as well.

Signed-off-by: Yu Tu <yu.tu@amlogic.com>
---
 drivers/tty/serial/meson_uart.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 45e00d928253..6b80e41b4cc1 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -395,24 +395,11 @@ static int meson_uart_verify_port(struct uart_port *port,
 
 static void meson_uart_release_port(struct uart_port *port)
 {
-	devm_iounmap(port->dev, port->membase);
-	port->membase = NULL;
-	devm_release_mem_region(port->dev, port->mapbase, port->mapsize);
+	/* nothing to do */
 }
 
 static int meson_uart_request_port(struct uart_port *port)
 {
-	if (!devm_request_mem_region(port->dev, port->mapbase, port->mapsize,
-				     dev_name(port->dev))) {
-		dev_err(port->dev, "Memory region busy\n");
-		return -EBUSY;
-	}
-
-	port->membase = devm_ioremap(port->dev, port->mapbase,
-					     port->mapsize);
-	if (!port->membase)
-		return -ENOMEM;
-
 	return 0;
 }
 
@@ -733,6 +720,18 @@ static int meson_uart_probe(struct platform_device *pdev)
 	if (!port)
 		return -ENOMEM;
 
+	if (!devm_request_mem_region(&pdev->dev, res_mem->start,
+				     resource_size(res_mem),
+				     dev_name(&pdev->dev))) {
+		dev_err(&pdev->dev, "Memory region busy\n");
+		return -EBUSY;
+	}
+
+	port->membase = devm_ioremap(&pdev->dev, res_mem->start,
+				     resource_size(res_mem));
+	if (IS_ERR(port->membase))
+		return PTR_ERR(port->membase);
+
 	ret = meson_uart_probe_clocks(pdev, port);
 	if (ret)
 		return ret;
@@ -754,10 +753,7 @@ static int meson_uart_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, port);
 
 	/* reset port before registering (and possibly registering console) */
-	if (meson_uart_request_port(port) >= 0) {
-		meson_uart_reset(port);
-		meson_uart_release_port(port);
-	}
+	meson_uart_reset(port);
 
 	ret = uart_add_one_port(&meson_uart_driver, port);
 	if (ret)
-- 
2.33.1