From: "Marek Behún" <kabel@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Stephen Boyd <sboyd@kernel.org>
Cc: "Gregory Clement" <gregory.clement@bootlin.com>,
"Pali Rohár" <pali@kernel.org>,
linux-clk@vger.kernel.org, linux-serial@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH v9 2/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
Date: Sat, 19 Feb 2022 16:28:14 +0100 [thread overview]
Message-ID: <20220219152818.4319-3-kabel@kernel.org> (raw)
In-Reply-To: <20220219152818.4319-1-kabel@kernel.org>
From: Pali Rohár <pali@kernel.org>
Add DT bindings documentation for device nodes with compatible string
"marvell,armada-3700-uart-clock".
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
.../clock/marvell,armada-3700-uart-clock.yaml | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
new file mode 100644
index 000000000000..175f5c8f2bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Marvell Armada 3720 UART clocks
+
+maintainers:
+ - Pali Rohár <pali@kernel.org>
+
+properties:
+ compatible:
+ const: marvell,armada-3700-uart-clock
+
+ reg:
+ items:
+ - description: UART Clock Control Register
+ - description: UART 2 Baud Rate Divisor Register
+
+ clocks:
+ description: |
+ List of parent clocks suitable for UART from following set:
+ "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"
+ UART clock can use one from this set and when more are provided
+ then kernel would choose and configure the most suitable one.
+ It is suggest to specify at least one TBG clock to achieve
+ baudrates above 230400 and also to specify clock which bootloader
+ used for UART (most probably xtal) for smooth boot log on UART.
+
+ clock-names:
+ items:
+ - const: TBG-A-P
+ - const: TBG-B-P
+ - const: TBG-A-S
+ - const: TBG-B-S
+ - const: xtal
+ minItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ uartclk: clock-controller@12010 {
+ compatible = "marvell,armada-3700-uart-clock";
+ reg = <0x12010 0x4>, <0x12210 0x4>;
+ clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
+ clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal";
+ #clock-cells = <1>;
+ };
--
2.34.1
next prev parent reply other threads:[~2022-02-19 15:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-19 15:28 [PATCH v9 0/6] serial: mvebu-uart: Support for higher baudrates Marek Behún
2022-02-19 15:28 ` [PATCH v9 1/6] math64: New DIV_U64_ROUND_CLOSEST helper Marek Behún
2022-02-19 15:28 ` Marek Behún [this message]
2022-02-24 23:01 ` [PATCH v9 2/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Stephen Boyd
2022-02-19 15:28 ` [PATCH v9 3/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Marek Behún
2022-02-24 23:02 ` Stephen Boyd
2022-02-19 15:28 ` [PATCH v9 4/6] dt-bindings: mvebu-uart: update information about UART clock Marek Behún
2022-02-24 23:02 ` Stephen Boyd
2022-02-19 15:28 ` [PATCH v9 5/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Bd Marek Behún
2022-02-19 15:28 ` [PATCH v9 6/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Marek Behún
2022-02-25 19:32 ` [PATCH v9 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2022-02-25 19:39 ` Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220219152818.4319-3-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=gregory.clement@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=pali@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).