From: "Pali Rohár" <pali@kernel.org>
To: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Johan Hovold" <johan@kernel.org>,
"Marek Behún" <kabel@kernel.org>
Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] serial: Fix support for UPF_SPD_* flags in serial drivers
Date: Mon, 21 Mar 2022 17:30:55 +0100 [thread overview]
Message-ID: <20220321163055.4058-4-pali@kernel.org> (raw)
In-Reply-To: <20220321163055.4058-1-pali@kernel.org>
Most serial drivers do not handle UPF_SPD_* flags correctly. They use
uart_get_baud_rate() and uart_get_divisor() functions for retrieving baud
rate and divisor which correctly handle UPF_SPD_* flags and set correct
value to HW. But drivers do not propagate correct value to termios
structure as they call just tty_termios_encode_baud_rate() function which
completely ignores these UPF_SPD_* flags. So termios structure reported to
userspace does not match to UPF_SPD_* flags which were used for configuring
HW and also does not match ASYNC_SDP_* flags stored in serial_struct which
are reported to userspace.
Fix this issue by introducing a new function uart_set_baud_rate() which is
wrapper around tty_termios_encode_baud_rate() and which handles those
UPF_SPD_* flags correctly.
Replace all calls of tty_termios_encode_baud_rate() function which take an
argument from uart_get_baud_rate() function by this new function
uart_set_baud_rate().
This ensures that serial drivers which are using uart_get_baud_rate() will
correctly handle UPF_SPD_* flags.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
drivers/tty/serial/21285.c | 2 +-
drivers/tty/serial/8250/8250_mtk.c | 2 +-
drivers/tty/serial/8250/8250_omap.c | 2 +-
drivers/tty/serial/8250/8250_port.c | 2 +-
drivers/tty/serial/altera_uart.c | 2 +-
drivers/tty/serial/ar933x_uart.c | 2 +-
drivers/tty/serial/arc_uart.c | 2 +-
drivers/tty/serial/dz.c | 2 +-
drivers/tty/serial/imx.c | 3 +-
drivers/tty/serial/lantiq.c | 2 +-
drivers/tty/serial/lpc32xx_hs.c | 2 +-
drivers/tty/serial/men_z135_uart.c | 2 +-
drivers/tty/serial/mps2-uart.c | 2 +-
drivers/tty/serial/msm_serial.c | 2 +-
drivers/tty/serial/mvebu-uart.c | 2 +-
drivers/tty/serial/owl-uart.c | 2 +-
drivers/tty/serial/pch_uart.c | 2 +-
drivers/tty/serial/pic32_uart.c | 2 +-
drivers/tty/serial/rda-uart.c | 2 +-
drivers/tty/serial/rp2.c | 2 +-
drivers/tty/serial/sccnxp.c | 2 +-
drivers/tty/serial/serial-tegra.c | 2 +-
drivers/tty/serial/serial_core.c | 51 +++++++++++++++++++++++++++++
drivers/tty/serial/sprd_serial.c | 2 +-
drivers/tty/serial/timbuart.c | 2 +-
drivers/tty/serial/vt8500_serial.c | 2 +-
drivers/tty/serial/xilinx_uartps.c | 2 +-
include/linux/serial_core.h | 2 ++
28 files changed, 79 insertions(+), 27 deletions(-)
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c
index 09baef4ccc39..4e4dbd58c581 100644
--- a/drivers/tty/serial/21285.c
+++ b/drivers/tty/serial/21285.c
@@ -265,7 +265,7 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
b = port->uartclk / (16 * quot);
- tty_termios_encode_baud_rate(termios, b, b);
+ uart_set_baud_rate(port, termios, b);
switch (termios->c_cflag & CSIZE) {
case CS5:
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index fb65dc601b23..4a46a7f039d0 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -406,7 +406,7 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
spin_unlock_irqrestore(&port->lock, flags);
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
}
static int __maybe_unused mtk8250_runtime_suspend(struct device *dev)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 73e5f1dbd075..96c1df9ffd25 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -510,7 +510,7 @@ static void omap_8250_set_termios(struct uart_port *port,
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
}
/* same as 8250 except that we may have extra flow bits set in EFR */
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 5775cbff8f6e..05ca0152b932 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2878,7 +2878,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
}
EXPORT_SYMBOL(serial8250_do_set_termios);
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 7c5f4e966b59..ec352d53662a 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -185,7 +185,7 @@ static void altera_uart_set_termios(struct uart_port *port,
if (old)
tty_termios_copy_hw(termios, old);
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
spin_lock_irqsave(&port->lock, flags);
uart_update_timeout(port, termios->c_cflag, baud);
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index 4379ca4842ae..48e8127d0e9d 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -355,7 +355,7 @@ static void ar933x_uart_set_termios(struct uart_port *port,
spin_unlock_irqrestore(&up->port.lock, flags);
if (tty_termios_baud_rate(new))
- tty_termios_encode_baud_rate(new, baud, baud);
+ uart_set_baud_rate(port, new, baud);
}
static void ar933x_uart_rx_chars(struct ar933x_uart_port *up)
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 596217d10d5c..cc2a06832699 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -391,7 +391,7 @@ arc_serial_set_termios(struct uart_port *port, struct ktermios *new,
/* Don't rewrite B0 */
if (tty_termios_baud_rate(new))
- tty_termios_encode_baud_rate(new, baud, baud);
+ uart_set_baud_rate(port, new, baud);
uart_update_timeout(port, new->c_cflag, baud);
diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c
index e9edabc5a211..8084966ba9f9 100644
--- a/drivers/tty/serial/dz.c
+++ b/drivers/tty/serial/dz.c
@@ -599,7 +599,7 @@ static void dz_set_termios(struct uart_port *uport, struct ktermios *termios,
baud = 9600;
bflag = DZ_B9600;
}
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(uport, termios, baud);
}
cflag |= bflag;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 90f82e6c54e4..b56344b46459 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1729,8 +1729,7 @@ imx_uart_set_termios(struct uart_port *port, struct ktermios *termios,
tdiv64 = sport->port.uartclk;
tdiv64 *= num;
do_div(tdiv64, denom * 16 * div);
- tty_termios_encode_baud_rate(termios,
- (speed_t)tdiv64, (speed_t)tdiv64);
+ uart_set_baud_rate(port, termios, (speed_t)tdiv64);
num -= 1;
denom -= 1;
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 497b334bc845..38b2f7fa80ff 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -502,7 +502,7 @@ lqasc_set_termios(struct uart_port *port,
/* Don't rewrite B0 */
if (tty_termios_baud_rate(new))
- tty_termios_encode_baud_rate(new, baud, baud);
+ uart_set_baud_rate(port, new, baud);
uart_update_timeout(port, cflag, baud);
}
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index b199d7859961..e6f9166be0c7 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -530,7 +530,7 @@ static void serial_lpc32xx_set_termios(struct uart_port *port,
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
}
static const char *serial_lpc32xx_type(struct uart_port *port)
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c
index 9acae5f8fc32..e3a83bca9991 100644
--- a/drivers/tty/serial/men_z135_uart.c
+++ b/drivers/tty/serial/men_z135_uart.c
@@ -713,7 +713,7 @@ static void men_z135_set_termios(struct uart_port *port,
spin_lock_irq(&port->lock);
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
bd_reg = uart_freq / (4 * baud);
iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG);
diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c
index 587b42f754cb..117a7afcd088 100644
--- a/drivers/tty/serial/mps2-uart.c
+++ b/drivers/tty/serial/mps2-uart.c
@@ -383,7 +383,7 @@ mps2_uart_set_termios(struct uart_port *port, struct ktermios *termios,
spin_unlock_irqrestore(&port->lock, flags);
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
}
static const char *mps2_uart_type(struct uart_port *port)
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index fcef7a961430..789dfeb286bf 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1262,7 +1262,7 @@ static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 300, 4000000);
baud = msm_set_baud_rate(port, baud, &flags);
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
/* calculate parity */
mr = msm_read(port, UART_MR2);
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index ab226da75f7b..7bd9579855fa 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -515,7 +515,7 @@ static void mvebu_uart_set_termios(struct uart_port *port,
baud = uart_get_baud_rate(port, old, NULL,
min_baud, max_baud);
} else {
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
uart_update_timeout(port, termios->c_cflag, baud);
}
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index 91f1eb0058d7..8d70cdbd4a73 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -387,7 +387,7 @@ static void owl_uart_set_termios(struct uart_port *port,
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
port->read_status_mask |= OWL_UART_STAT_RXER;
if (termios->c_iflag & INPCK)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index f0351e6f0ef6..53f2e9c09d8d 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1412,7 +1412,7 @@ static void pch_uart_set_termios(struct uart_port *port,
pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
out:
spin_unlock(&port->lock);
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index 0a12fb11e698..286045456a1c 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -596,7 +596,7 @@ static void pic32_uart_set_termios(struct uart_port *port,
uart_update_timeout(port, new->c_cflag, baud);
if (tty_termios_baud_rate(new))
- tty_termios_encode_baud_rate(new, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
/* enable uart */
pic32_uart_en_and_unmask(port);
diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c
index d550d8fa2fab..c08c597cda86 100644
--- a/drivers/tty/serial/rda-uart.c
+++ b/drivers/tty/serial/rda-uart.c
@@ -318,7 +318,7 @@ static void rda_uart_set_termios(struct uart_port *port,
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
/* update the per-port timeout */
uart_update_timeout(port, termios->c_cflag, baud);
diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c
index 6689d8add8f7..a12e9a97905b 100644
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -382,7 +382,7 @@ static void rp2_uart_set_termios(struct uart_port *port,
baud_div = uart_get_divisor(port, baud);
if (tty_termios_baud_rate(new))
- tty_termios_encode_baud_rate(new, baud, baud);
+ uart_set_baud_rate(port, new, baud);
spin_lock_irqsave(&port->lock, flags);
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index 10cc16a71f26..141dc0ebb688 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -714,7 +714,7 @@ static void sccnxp_set_termios(struct uart_port *port,
/* Report actual baudrate back to core */
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
/* Enable RX & TX */
sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 45e2e4109acd..876aa57dbcd0 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1360,7 +1360,7 @@ static void tegra_uart_set_termios(struct uart_port *u,
return;
}
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(u, termios, baud);
spin_lock_irqsave(&u->lock, flags);
/* Flow control */
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 34e085a038fe..113db02be87e 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -477,6 +477,57 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
EXPORT_SYMBOL(uart_get_baud_rate);
+void
+uart_set_baud_rate(struct uart_port *port, struct ktermios *termios, unsigned int baud)
+{
+ upf_t flags = port->flags & UPF_SPD_MASK;
+ unsigned int close = baud / 50;
+ unsigned int altbaud = 0;
+
+ switch (flags) {
+ case UPF_SPD_HI:
+ altbaud = 57600;
+ break;
+ case UPF_SPD_VHI:
+ altbaud = 115200;
+ break;
+ case UPF_SPD_SHI:
+ altbaud = 230400;
+ break;
+ case UPF_SPD_WARP:
+ altbaud = 460800;
+ break;
+ }
+
+ /*
+ * UPF_SPD_* port flags are in use when B38400 is set in termios.
+ * Let termios baudrate set to B38400 value when new baudrate is
+ * in 2% tolerance (same tolerance as in tty_termios_encode_baud_rate).
+ * For UPF_SPD_CUST flag it is required to be this function called with
+ * baud = 38400 and then real baudrate depends only on custom_divisor.
+ */
+ if (tty_termios_baud_rate(termios) == 38400) {
+ if (altbaud && baud - close >= altbaud && baud + close <= altbaud) {
+ altbaud = baud;
+ baud = 38400;
+ } else if (flags == UPF_SPD_CUST && baud == 38400) {
+ /* See uart_update_timeout() about this calculation */
+ altbaud = DIV_ROUND_CLOSEST(port->uartclk, 16 * port->custom_divisor);
+ }
+ }
+
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
+ /*
+ * If UPF_SPD_* port flags are active and in use then store into
+ * TCGETS2 c_*speed fields real baudrate.
+ */
+ if (baud == 38400 && altbaud)
+ termios->c_ispeed = termios->c_ospeed = altbaud;
+}
+
+EXPORT_SYMBOL(uart_set_baud_rate);
+
/**
* uart_get_divisor - return uart clock divisor
* @port: uart_port structure describing the port.
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 9a7ae6384edf..17b0cadd31e6 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -867,7 +867,7 @@ static void sprd_set_termios(struct uart_port *port,
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
}
static const char *sprd_type(struct uart_port *port)
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index 08941eabe7b1..c41377d218e7 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -294,7 +294,7 @@ static void timbuart_set_termios(struct uart_port *port,
up initially */
if (old)
tty_termios_copy_hw(termios, old);
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
spin_lock_irqsave(&port->lock, flags);
iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index e15b2bf69904..2e5d9b52e478 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -369,7 +369,7 @@ static void vt8500_set_termios(struct uart_port *port,
baud = uart_get_baud_rate(port, termios, old, 900, 921600);
baud = vt8500_set_baud_rate(port, baud);
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
/* calculate parity */
lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR);
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index d5e243908d9f..300108c9ba7e 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -714,7 +714,7 @@ static void cdns_uart_set_termios(struct uart_port *port,
baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
baud = cdns_uart_set_baud_rate(port, baud);
if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_set_baud_rate(port, termios, baud);
/* Update the per-port timeout. */
uart_update_timeout(port, termios->c_cflag, baud);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index c58cc142d23f..a0f736be5645 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -330,6 +330,8 @@ void uart_update_timeout(struct uart_port *port, unsigned int cflag,
unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
struct ktermios *old, unsigned int min,
unsigned int max);
+void uart_set_baud_rate(struct uart_port *port, struct ktermios *termios,
+ unsigned int baud);
unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
/* Base timer interval for polling */
--
2.20.1
next prev parent reply other threads:[~2022-03-21 16:31 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-21 16:30 [PATCH 0/3] serial: Fix support for UPF_SPD_* flags Pali Rohár
2022-03-21 16:30 ` [PATCH 1/3] serial: core: Document why UPF_SPD_CUST is not handled in uart_get_baud_rate() Pali Rohár
2022-03-21 16:30 ` [PATCH 2/3] serial: core: Fix function uart_update_timeout() to handle UPF_SPD_CUST flag Pali Rohár
2022-03-21 16:30 ` Pali Rohár [this message]
2022-03-22 14:29 ` [PATCH 0/3] serial: Fix support for UPF_SPD_* flags Andy Shevchenko
2022-03-22 18:53 ` Pali Rohár
2022-04-22 14:28 ` Greg Kroah-Hartman
2022-07-07 8:48 ` Pali Rohár
2022-07-08 13:07 ` Greg Kroah-Hartman
2022-07-08 13:26 ` Pali Rohár
2022-07-08 13:51 ` Greg Kroah-Hartman
2022-07-08 14:20 ` Pali Rohár
2022-07-08 15:42 ` Andy Shevchenko
2022-07-08 15:54 ` Pali Rohár
2022-07-08 16:09 ` Andy Shevchenko
2022-07-08 16:25 ` Pali Rohár
2022-07-08 17:41 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220321163055.4058-4-pali@kernel.org \
--to=pali@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=johan@kernel.org \
--cc=kabel@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).