[PATCH v1 tty-next 2/2] 8250: microchip: pci1xxxx: Add power management functions to pci1xxxx's quad-uart driver.

[Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>]

pci1xxxx's quad-uart function has the capability to wake up the host from
suspend state. Enable wakeup before entering into suspend and disable
wakeup upon resume.

Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
---
 drivers/tty/serial/8250/8250_pci1xxxx.c | 122 ++++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c
index 56852ae0585e..38c2a6a9e5d5 100644
--- a/drivers/tty/serial/8250/8250_pci1xxxx.c
+++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
@@ -70,6 +70,7 @@
 
 #define UART_PCI_CTRL_REG		0x80
 #define UART_PCI_CTRL_SET_MULTIPLE_MSI	BIT(4)
+#define UART_PCI_CTRL_D3_CLK_ENABLE	BIT(0)
 
 #define UART_WAKE_REG			0x8C
 #define UART_WAKE_MASK_REG		0x90
@@ -78,6 +79,9 @@
 #define UART_WAKE_INT			BIT(0)
 #define UART_WAKE_SRCS			(UART_WAKE_N_PIN | UART_WAKE_NCTS | UART_WAKE_INT)
 
+#define UART_RESET_REG			0x94
+#define UART_RESET_D3_RESET_DISABLE	BIT(16)
+
 #define UART_BIT_SAMPLE_CNT 16
 
 struct pci1xxxx_8250 {
@@ -439,6 +443,121 @@ static void pci1xxxx_serial_remove(struct pci_dev *dev)
 		serial8250_unregister_port(priv->line[i]);
 }
 
+#ifdef CONFIG_PM_SLEEP
+
+static char pci1xxxx_port_suspend(int line)
+{
+	struct uart_8250_port *up = serial8250_get_port(line);
+	struct uart_port *port = &up->port;
+	unsigned long flags;
+	u8 wakeup_mask;
+	char ret = 0;
+
+	if (port->suspended == 0 && port->dev) {
+		wakeup_mask = readb(up->port.membase + UART_WAKE_MASK_REG);
+
+		spin_lock_irqsave(&port->lock, flags);
+		port->mctrl &= ~TIOCM_OUT2;
+		port->ops->set_mctrl(port, port->mctrl);
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		if ((wakeup_mask & UART_WAKE_SRCS) != UART_WAKE_SRCS)
+			ret = 0x01;
+		else
+			ret = 0x00;
+	}
+
+	writeb(UART_WAKE_SRCS, port->membase + UART_WAKE_REG);
+
+	return ret;
+}
+
+void pci1xxxx_port_resume(int line)
+{
+	struct uart_8250_port *up = serial8250_get_port(line);
+	struct uart_port *port = &up->port;
+	unsigned long flags;
+
+	writeb(UART_WAKE_SRCS, port->membase + UART_WAKE_REG);
+
+	if (port->suspended == 0) {
+		spin_lock_irqsave(&port->lock, flags);
+		port->mctrl |= TIOCM_OUT2;
+		port->ops->set_mctrl(port, port->mctrl);
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+}
+
+static int pci1xxxx_suspend(struct device *dev)
+{
+	struct pci1xxxx_8250 *priv = dev_get_drvdata(dev);
+	struct pci_dev *pcidev = to_pci_dev(dev);
+	unsigned int data;
+	void __iomem *p;
+	char wakeup = 0;
+	int i;
+
+	for (i = 0; i < priv->nr; i++) {
+		if (priv->line[i] >= 0) {
+			serial8250_suspend_port(priv->line[i]);
+			wakeup |= pci1xxxx_port_suspend(priv->line[i]);
+		}
+	}
+
+	p = pci_ioremap_bar(pcidev, 0);
+	if (!p) {
+		dev_err(dev, "remapping of bar 0 memory failed");
+		return -ENOMEM;
+	}
+
+	data = readl(p + UART_RESET_REG);
+	writel(data | UART_RESET_D3_RESET_DISABLE, p + UART_RESET_REG);
+
+	if (wakeup)
+		writeb(UART_PCI_CTRL_D3_CLK_ENABLE, (p + UART_PCI_CTRL_REG));
+
+	iounmap(p);
+
+	device_set_wakeup_enable(dev, true);
+
+	pci_wake_from_d3(pcidev, true);
+
+	return 0;
+}
+
+static int pci1xxxx_resume(struct device *dev)
+{
+	struct pci1xxxx_8250 *priv = dev_get_drvdata(dev);
+	struct pci_dev *pcidev = to_pci_dev(dev);
+	unsigned int data;
+	void __iomem *p;
+	int i;
+
+	p = pci_ioremap_bar(pcidev, 0);
+	if (!p) {
+		dev_err(dev, "remapping of bar 0 memory failed");
+		return -ENOMEM;
+	}
+
+	data = readl(p + UART_RESET_REG);
+	writel(data & ~UART_RESET_D3_RESET_DISABLE, p + UART_RESET_REG);
+	iounmap(p);
+
+	for (i = 0; i < priv->nr; i++) {
+		if (priv->line[i] >= 0) {
+			pci1xxxx_port_resume(priv->line[i]);
+			serial8250_resume_port(priv->line[i]);
+		}
+	}
+
+	return 0;
+}
+
+#endif
+
+static SIMPLE_DEV_PM_OPS(pci1xxxx_pm_ops, pci1xxxx_suspend,
+			 pci1xxxx_resume);
+
 static const struct pci_device_id pci1xxxx_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MCHP_PCI1XXXX, PCI_DEVICE_ID_MCHP_PCI11010) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MCHP_PCI1XXXX, PCI_DEVICE_ID_MCHP_PCI11101) },
@@ -453,6 +572,9 @@ static struct pci_driver pci1xxxx_pci_driver = {
 	.name		= "pci1xxxx serial",
 	.probe		= pci1xxxx_serial_probe,
 	.remove	= pci1xxxx_serial_remove,
+	.driver	= {
+		.pm     = &pci1xxxx_pm_ops,
+	},
 	.id_table	= pci1xxxx_pci_tbl,
 };
 
-- 
2.25.1