From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-serial@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Ulf Hansson <ulf.hansson@linaro.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 8/8] tty: Convert hw_stopped in tty_struct to bool
Date: Thu, 9 Mar 2023 10:20:35 +0200 [thread overview]
Message-ID: <20230309082035.14880-9-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20230309082035.14880-1-ilpo.jarvinen@linux.intel.com>
hw_stopped in tty_struct is used like bool, convert the variable type
to bool.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/char/pcmcia/synclink_cs.c | 6 +++---
drivers/mmc/core/sdio_uart.c | 10 +++++-----
drivers/tty/amiserial.c | 6 +++---
drivers/tty/mxser.c | 6 +++---
drivers/tty/synclink_gt.c | 6 +++---
include/linux/tty.h | 2 +-
6 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 6ddfeb2fe98f..97c5bfb9d58a 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -1060,7 +1060,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
if (info->serial_signals & SerialSignal_CTS) {
if (debug_level >= DEBUG_LEVEL_ISR)
printk("CTS tx start...");
- tty->hw_stopped = 0;
+ tty->hw_stopped = false;
tx_start(info, tty);
info->pending_bh |= BH_TRANSMIT;
return;
@@ -1069,7 +1069,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
if (!(info->serial_signals & SerialSignal_CTS)) {
if (debug_level >= DEBUG_LEVEL_ISR)
printk("CTS tx stop...");
- tty->hw_stopped = 1;
+ tty->hw_stopped = true;
tx_stop(info);
}
}
@@ -2312,7 +2312,7 @@ static void mgslpc_set_termios(struct tty_struct *tty,
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
- tty->hw_stopped = 0;
+ tty->hw_stopped = false;
tx_release(tty);
}
}
diff --git a/drivers/mmc/core/sdio_uart.c b/drivers/mmc/core/sdio_uart.c
index 50536fe59f1a..aa659758563f 100644
--- a/drivers/mmc/core/sdio_uart.c
+++ b/drivers/mmc/core/sdio_uart.c
@@ -478,13 +478,13 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
int cts = (status & UART_MSR_CTS);
if (tty->hw_stopped) {
if (cts) {
- tty->hw_stopped = 0;
+ tty->hw_stopped = false;
sdio_uart_start_tx(port);
tty_wakeup(tty);
}
} else {
if (!cts) {
- tty->hw_stopped = 1;
+ tty->hw_stopped = true;
sdio_uart_stop_tx(port);
}
}
@@ -633,7 +633,7 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
if (C_CRTSCTS(tty))
if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
- tty->hw_stopped = 1;
+ tty->hw_stopped = true;
clear_bit(TTY_IO_ERROR, &tty->flags);
@@ -882,14 +882,14 @@ static void sdio_uart_set_termios(struct tty_struct *tty,
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
+ tty->hw_stopped = false;
sdio_uart_start_tx(port);
}
/* Handle turning on CRTSCTS */
if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) {
- tty->hw_stopped = 1;
+ tty->hw_stopped = true;
sdio_uart_stop_tx(port);
}
}
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index d7515d61659e..c06ad0a0744b 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -347,7 +347,7 @@ static void check_modem_status(struct serial_state *info)
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx start...");
#endif
- port->tty->hw_stopped = 0;
+ port->tty->hw_stopped = false;
info->IER |= UART_IER_THRI;
amiga_custom.intena = IF_SETCLR | IF_TBE;
mb();
@@ -362,7 +362,7 @@ static void check_modem_status(struct serial_state *info)
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx stop...");
#endif
- port->tty->hw_stopped = 1;
+ port->tty->hw_stopped = true;
info->IER &= ~UART_IER_THRI;
/* disable Tx interrupt and remove any pending interrupts */
amiga_custom.intena = IF_TBE;
@@ -1197,7 +1197,7 @@ static void rs_set_termios(struct tty_struct *tty, const struct ktermios *old_te
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
- tty->hw_stopped = 0;
+ tty->hw_stopped = false;
rs_start(tty);
}
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index ef3116e87975..10855e66fda1 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -553,7 +553,7 @@ static void mxser_handle_cts(struct tty_struct *tty, struct mxser_port *info,
if (tty->hw_stopped) {
if (cts) {
- tty->hw_stopped = 0;
+ tty->hw_stopped = false;
if (!mxser_16550A_or_MUST(info))
__mxser_start_tx(info);
@@ -563,7 +563,7 @@ static void mxser_handle_cts(struct tty_struct *tty, struct mxser_port *info,
} else if (cts)
return;
- tty->hw_stopped = 1;
+ tty->hw_stopped = true;
if (!mxser_16550A_or_MUST(info))
__mxser_stop_tx(info);
}
@@ -1361,7 +1361,7 @@ static void mxser_set_termios(struct tty_struct *tty,
spin_unlock_irqrestore(&info->slock, flags);
if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
- tty->hw_stopped = 0;
+ tty->hw_stopped = false;
mxser_start(tty);
}
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 33f258d6fef9..543b3224dce9 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -730,7 +730,7 @@ static void set_termios(struct tty_struct *tty,
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
- tty->hw_stopped = 0;
+ tty->hw_stopped = false;
tx_release(tty);
}
}
@@ -1953,13 +1953,13 @@ static void cts_change(struct slgt_info *info, unsigned short status)
if (info->port.tty) {
if (info->port.tty->hw_stopped) {
if (info->signals & SerialSignal_CTS) {
- info->port.tty->hw_stopped = 0;
+ info->port.tty->hw_stopped = false;
info->pending_bh |= BH_TRANSMIT;
return;
}
} else {
if (!(info->signals & SerialSignal_CTS))
- info->port.tty->hw_stopped = 1;
+ info->port.tty->hw_stopped = true;
}
}
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 093935e97f42..60871a9d3212 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -227,7 +227,7 @@ struct tty_struct {
unsigned long unused[0];
} __aligned(sizeof(unsigned long)) ctrl;
- int hw_stopped;
+ bool hw_stopped;
unsigned int receive_room;
int flow_change;
--
2.30.2
next prev parent reply other threads:[~2023-03-09 8:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-09 8:20 [PATCH 0/8] tty: Cleanups Ilpo Järvinen
2023-03-09 8:20 ` [PATCH 1/8] n_tty: Convert no_space_left to space_left boolean Ilpo Järvinen
2023-03-09 8:20 ` [PATCH 2/8] tty_ioctl: Use BIT() for internal flags Ilpo Järvinen
2023-03-09 8:20 ` [PATCH 3/8] Bluetooth: hci_ldisc: Fix tty_set_termios() return value assumptions Ilpo Järvinen
2023-03-14 23:10 ` patchwork-bot+bluetooth
2023-03-09 8:20 ` [PATCH 4/8] n_tty: Sort includes alphabetically Ilpo Järvinen
2023-03-09 8:20 ` [PATCH 5/8] n_tty: Use DIV_ROUND_UP() in room calculation Ilpo Järvinen
2023-03-09 8:20 ` [PATCH 6/8] n_tty: Cleanup includes Ilpo Järvinen
2023-03-09 8:20 ` [PATCH 7/8] n_tty: Reindent if condition Ilpo Järvinen
2023-03-09 13:45 ` Jiri Slaby
2023-03-09 13:59 ` Ilpo Järvinen
2023-03-09 8:20 ` Ilpo Järvinen [this message]
2023-03-09 8:33 ` [PATCH 8/8] tty: Convert hw_stopped in tty_struct to bool Arnd Bergmann
2023-03-09 14:58 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230309082035.14880-9-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=arnd@arndb.de \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).