[PATCH] tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028A

[Robert Hodaszi <robert.hodaszi@digi.com>]

LS1028A is using DMA with LPUART. Having RX watermark set to 1, means
DMA transactions are started only after receiving the second character.

On other platforms with newer LPUART IP, Receiver Idle Empty function
initiates the DMA request after the receiver is idling for 4 characters.
But this feature is missing on LS1028A, which is causing a 1-character
delay in the RX direction on this platform.

Set RX watermark to 0 to initiate RX DMA after each character.

Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
---
 drivers/tty/serial/fsl_lpuart.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 7486a2b8556c..7fd30fcc10c6 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -310,7 +310,7 @@ static const struct lpuart_soc_data ls1021a_data = {
 static const struct lpuart_soc_data ls1028a_data = {
 	.devtype = LS1028A_LPUART,
 	.iotype = UPIO_MEM32,
-	.rx_watermark = 1,
+	.rx_watermark = 0,
 };
 
 static struct lpuart_soc_data imx7ulp_data = {
-- 
2.34.1