* [rt-devel:linux-6.6.y-rt-rebase] [serial] 7ae7fa6bcb: dmesg.inconsistent{INITIAL_USE}->{IN-NMI}usage
@ 2023-09-30 2:40 kernel test robot
2023-10-02 10:44 ` Sebastian Andrzej Siewior
0 siblings, 1 reply; 2+ messages in thread
From: kernel test robot @ 2023-09-30 2:40 UTC (permalink / raw)
To: John Ogness
Cc: oe-lkp, lkp, Sebastian Andrzej Siewior, linux-serial, oliver.sang
Hello,
kernel test robot noticed "dmesg.inconsistent{INITIAL_USE}->{IN-NMI}usage" on:
commit: 7ae7fa6bcb29a234a2e618f94bb69f533cecaf53 ("serial: 8250: implement non-BKL console")
https://git.kernel.org/cgit/linux/kernel/git/rt/linux-rt-devel.git linux-6.6.y-rt-rebase
in testcase: boot
compiler: gcc-12
test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
(please refer to attached dmesg/kmsg for entire log/backtrace)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <oliver.sang@intel.com>
| Closes: https://lore.kernel.org/oe-lkp/202309301045.1475d353-oliver.sang@intel.com
[ 504.779539][ C1] NMI backtrace for cpu 1
[ 504.779544][ C1]
[ 504.779546][ C1] ================================
[ 504.779547][ C1] WARNING: inconsistent lock state
[ 504.779549][ C1] 6.6.0-rc3-00047-g7ae7fa6bcb29 #1 Tainted: G W N
[ 504.779551][ C1] --------------------------------
[ 504.779552][ C1] inconsistent {INITIAL USE} -> {IN-NMI} usage.
[ 504.779554][ C1] swapper/0/1 [HC1[1]:SC0[0]:HE0:SE1] takes:
[ 504.779557][ C1] c383e7c8 (console_srcu){....}-{0:0}, at: console_srcu_read_lock+0x0/0x58
[ 504.779571][ C1] {INITIAL USE} state was registered at:
[ 504.779572][ C1] __lock_acquire+0x2d1/0xb68
[ 504.779579][ C1] lock_sync+0x80/0xd0
[ 504.779583][ C1] __synchronize_srcu+0x4c/0x168
[ 504.779588][ C1] synchronize_srcu+0x9a/0xc0
[ 504.779591][ C1] unregister_console_locked+0xaa/0x228
[ 504.779594][ C1] register_console+0x33d/0x500
[ 504.779598][ C1] univ8250_console_init+0x1b/0x30
[ 504.779604][ C1] console_init+0x46/0x21c
[ 504.779610][ C1] start_kernel+0x240/0x490
[ 504.779614][ C1] i386_start_kernel+0x43/0x44
[ 504.779618][ C1] startup_32_smp+0x156/0x158
[ 504.779621][ C1] irq event stamp: 224066784
[ 504.779622][ C1] hardirqs last enabled at (224066783): [<c26e24e5>] _raw_spin_unlock_irqrestore+0x51/0x80
[ 504.779630][ C1] hardirqs last disabled at (224066784): [<c26e22c5>] _raw_spin_lock_irqsave+0x5d/0x60
[ 504.779635][ C1] softirqs last enabled at (224065172): [<c2555944>] fib_create_info+0x66c/0x8e0
[ 504.779639][ C1] softirqs last disabled at (224065170): [<c2555888>] fib_create_info+0x5b0/0x8e0
[ 504.779642][ C1]
[ 504.779642][ C1] other info that might help us debug this:
[ 504.779643][ C1] Possible unsafe locking scenario:
[ 504.779643][ C1]
[ 504.779644][ C1] CPU0
[ 504.779645][ C1] ----
[ 504.779645][ C1] lock(console_srcu);
[ 504.779648][ C1] <Interrupt>
[ 504.779649][ C1] lock(console_srcu);
[ 504.779651][ C1]
[ 504.779651][ C1] *** DEADLOCK ***
[ 504.779651][ C1]
[ 504.779652][ C1] 4 locks held by swapper/0/1:
[ 504.779654][ C1] #0: cb13ccf0 (&tty->legacy_mutex){+.+.}-{3:3}, at: tty_lock+0x2b/0x54
[ 504.779665][ C1] #1: cb17117c (&port->mutex){+.+.}-{3:3}, at: tty_port_open+0x48/0xc0
[ 504.779674][ C1] #2: c4719e70 (&port_lock_key){....}-{2:2}, at: serial8250_do_startup+0x2a6/0xb70
[ 504.779682][ C1] #3: c383e7c8 (console_srcu){....}-{0:0}, at: console_srcu_read_lock+0x0/0x58
[ 504.779689][ C1]
[ 504.779689][ C1] stack backtrace:
[ 504.779691][ C1] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W N 6.6.0-rc3-00047-g7ae7fa6bcb29 #1
[ 504.779695][ C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 504.779697][ C1] Call Trace:
[ 504.779699][ C1] dump_stack_lvl+0x70/0xe0
[ 504.779704][ C1] dump_stack+0x12/0x18
[ 504.779707][ C1] print_usage_bug+0x26b/0x360
[ 504.779713][ C1] lock_acquire+0x1cc/0x2a0
[ 504.779718][ C1] ? prb_final_commit+0x1a/0x2c
[ 504.779723][ C1] ? console_srcu_read_lock_is_held+0x2c/0x2c
[ 504.779727][ C1] console_srcu_read_lock+0x4e/0x58
[ 504.779730][ C1] ? console_srcu_read_lock_is_held+0x2c/0x2c
[ 504.779733][ C1] cons_atomic_flush+0x4c/0x390
[ 504.779738][ C1] vprintk_emit+0x8d/0x300
[ 504.779743][ C1] vprintk_deferred+0x29/0x30
[ 504.779747][ C1] vprintk+0x28/0x38
[ 504.779750][ C1] _printk+0x18/0x1c
[ 504.779752][ C1] nmi_cpu_backtrace+0xc3/0x1cc
[ 504.779758][ C1] nmi_cpu_backtrace_handler+0xa/0x10
[ 504.779762][ C1] nmi_handle+0x124/0x30c
[ 504.779768][ C1] ? nmi_handle+0x18/0x30c
[ 504.779773][ C1] default_do_nmi+0x36/0x1bc
[ 504.779781][ C1] exc_nmi+0xde/0x118
[ 504.779785][ C1] asm_exc_nmi+0xae/0x29c
[ 504.779790][ C1] EIP: serial8250_do_startup+0x954/0xb70
[ 504.779794][ C1] Code: c6 02 00 8b 45 ec ba 01 00 00 00 8b 7d e4 89 90 84 02 00 00 89 b8 5c 02 00 00 8b 45 e8 e8 14 43 51 ff 84 c0 75 34 f3 90 85 f6 <8b> 55 f0 bf 40 00 00 00 74 86 c6 02 00 8d 52 01 bf 3f 00 00 00 f6
[ 504.779797][ C1] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000
[ 504.779799][ C1] ESI: 00000000 EDI: c3993800 EBP: c4acbcd4 ESP: c4acbc9c
[ 504.779801][ C1] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00000046
[ 504.779806][ C1] ? trace_raw_output_console+0x2f/0x64
[ 504.779812][ C1] ? serial8250_do_startup+0x954/0xb70
[ 504.779815][ C1] ? mark_held_locks+0x43/0x68
[ 504.779821][ C1] serial8250_startup+0x19/0x1c
[ 504.779824][ C1] uart_port_startup+0xec/0x264
[ 504.779829][ C1] uart_startup+0x26/0x38
[ 504.779832][ C1] uart_port_activate+0x37/0x74
[ 504.779836][ C1] tty_port_open+0x6d/0xc0
[ 504.779840][ C1] uart_open+0x15/0x20
[ 504.779844][ C1] tty_open+0x13a/0x698
[ 504.779848][ C1] ? chrdev_open+0x1c7/0x1f8
[ 504.779854][ C1] ? tty_init_dev+0x204/0x204
[ 504.779857][ C1] chrdev_open+0x99/0x1f8
[ 504.779861][ C1] ? __unregister_chrdev+0x3c/0x3c
[ 504.779865][ C1] do_dentry_open+0x1e5/0x540
[ 504.779871][ C1] ? inode_permission+0x63/0x1b4
[ 504.779875][ C1] ? __unregister_chrdev+0x3c/0x3c
[ 504.779879][ C1] vfs_open+0x2e/0x38
[ 504.779883][ C1] do_open+0x22d/0x384
[ 504.779888][ C1] path_openat+0xcb/0x1d4
[ 504.779891][ C1] ? kmem_cache_alloc+0x189/0x390
[ 504.779898][ C1] do_filp_open+0xa2/0x144
[ 504.779906][ C1] file_open_name+0x180/0x1a8
[ 504.779911][ C1] filp_open+0x2b/0x5c
[ 504.779916][ C1] console_on_rootfs+0x1a/0x58
[ 504.779920][ C1] ? wait_for_initramfs+0x38/0x60
[ 504.779923][ C1] kernel_init_freeable+0x196/0x2dc
[ 504.779927][ C1] ? kernel_init+0x15/0x1c4
[ 504.779930][ C1] ? rest_init+0x18c/0x18c
[ 504.779933][ C1] kernel_init+0x15/0x1c4
[ 504.779936][ C1] ? schedule_tail+0x4e/0x54
[ 504.779941][ C1] ret_from_fork+0x35/0x40
[ 504.779946][ C1] ? rest_init+0x18c/0x18c
[ 504.779950][ C1] ret_from_fork_asm+0x12/0x18
[ 504.779953][ C1] entry_INT80_32+0xf0/0xf0
[ 504.779959][ C1] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W N 6.6.0-rc3-00047-g7ae7fa6bcb29 #1
[ 504.779962][ C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 504.779964][ C1] EIP: serial8250_do_startup+0x954/0xb70
[ 504.779968][ C1] Code: c6 02 00 8b 45 ec ba 01 00 00 00 8b 7d e4 89 90 84 02 00 00 89 b8 5c 02 00 00 8b 45 e8 e8 14 43 51 ff 84 c0 75 34 f3 90 85 f6 <8b> 55 f0 bf 40 00 00 00 74 86 c6 02 00 8d 52 01 bf 3f 00 00 00 f6
[ 504.779970][ C1] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000
[ 504.779972][ C1] ESI: 00000000 EDI: c3993800 EBP: c4acbcd4 ESP: c4acbc9c
[ 504.779975][ C1] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00000046
[ 504.779978][ C1] CR0: 80050033 CR2: b7efdcd4 CR3: 03d2d000 CR4: 000406d0
[ 504.779985][ C1] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 504.779987][ C1] DR6: fffe0ff0 DR7: 00000400
[ 504.779989][ C1] Call Trace:
[ 504.779990][ C1] ? show_regs+0x51/0x58
[ 504.779994][ C1] ? nmi_cpu_backtrace+0xca/0x1cc
[ 504.779999][ C1] ? nmi_cpu_backtrace_handler+0xa/0x10
[ 504.780003][ C1] ? nmi_handle+0x124/0x30c
[ 504.780006][ C1] ? nmi_handle+0x18/0x30c
[ 504.780011][ C1] ? default_do_nmi+0x36/0x1bc
[ 504.780016][ C1] ? exc_nmi+0xde/0x118
[ 504.780020][ C1] ? asm_exc_nmi+0xae/0x29c
[ 504.780024][ C1] ? trace_raw_output_console+0x2f/0x64
[ 504.780029][ C1] ? serial8250_do_startup+0x954/0xb70
[ 504.780033][ C1] ? serial8250_do_startup+0x954/0xb70
[ 504.780036][ C1] ? mark_held_locks+0x43/0x68
[ 504.780042][ C1] serial8250_startup+0x19/0x1c
[ 504.780045][ C1] uart_port_startup+0xec/0x264
[ 504.780049][ C1] uart_startup+0x26/0x38
[ 504.780053][ C1] uart_port_activate+0x37/0x74
[ 504.780057][ C1] tty_port_open+0x6d/0xc0
[ 504.780061][ C1] uart_open+0x15/0x20
[ 504.780065][ C1] tty_open+0x13a/0x698
[ 504.780068][ C1] ? chrdev_open+0x1c7/0x1f8
[ 504.780072][ C1] ? tty_init_dev+0x204/0x204
[ 504.780076][ C1] chrdev_open+0x99/0x1f8
[ 504.780080][ C1] ? __unregister_chrdev+0x3c/0x3c
[ 504.780083][ C1] do_dentry_open+0x1e5/0x540
[ 504.780088][ C1] ? inode_permission+0x63/0x1b4
[ 504.780091][ C1] ? __unregister_chrdev+0x3c/0x3c
[ 504.780095][ C1] vfs_open+0x2e/0x38
[ 504.780099][ C1] do_open+0x22d/0x384
[ 504.780103][ C1] path_openat+0xcb/0x1d4
[ 504.780107][ C1] ? kmem_cache_alloc+0x189/0x390
[ 504.780112][ C1] do_filp_open+0xa2/0x144
[ 504.780120][ C1] file_open_name+0x180/0x1a8
[ 504.780125][ C1] filp_open+0x2b/0x5c
[ 504.780130][ C1] console_on_rootfs+0x1a/0x58
[ 504.780134][ C1] ? wait_for_initramfs+0x38/0x60
[ 504.780137][ C1] kernel_init_freeable+0x196/0x2dc
[ 504.780141][ C1] ? kernel_init+0x15/0x1c4
[ 504.780145][ C1] ? rest_init+0x18c/0x18c
[ 504.780148][ C1] kernel_init+0x15/0x1c4
[ 504.780151][ C1] ? schedule_tail+0x4e/0x54
[ 504.780155][ C1] ret_from_fork+0x35/0x40
[ 504.780158][ C1] ? rest_init+0x18c/0x18c
[ 504.780161][ C1] ret_from_fork_asm+0x12/0x18
[ 504.780164][ C1] entry_INT80_32+0xf0/0xf0
The kernel config and materials to reproduce are available at:
https://download.01.org/0day-ci/archive/20230930/202309301045.1475d353-oliver.sang@intel.com
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-10-02 10:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-09-30 2:40 [rt-devel:linux-6.6.y-rt-rebase] [serial] 7ae7fa6bcb: dmesg.inconsistent{INITIAL_USE}->{IN-NMI}usage kernel test robot
2023-10-02 10:44 ` Sebastian Andrzej Siewior
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).