From: Ronald Wahl <rwahl@gmx.de>
To: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Vignesh Raghavendra <vigneshr@ti.com>,
Ronald Wahl <ronald.wahl@raritan.com>
Subject: [PATCH] serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit
Date: Mon, 30 Oct 2023 19:20:44 +0100 [thread overview]
Message-ID: <20231030182044.14056-1-rwahl@gmx.de> (raw)
This fixes commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX
interrupt after DMA enable") which unfortunately set the
UART_HAS_RHR_IT_DIS bit in the UART_OMAP_IER2 register and never
cleared it.
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
---
drivers/tty/serial/8250/8250_omap.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index ca972fd37725..c7ab2963040b 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -914,7 +914,7 @@ static void __dma_rx_do_complete(struct uart_8250_port *p)
if (priv->habit & UART_HAS_RHR_IT_DIS) {
reg = serial_in(p, UART_OMAP_IER2);
reg &= ~UART_OMAP_IER2_RHR_IT_DIS;
- serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS);
+ serial_out(p, UART_OMAP_IER2, reg);
}
dmaengine_tx_status(rxchan, cookie, &state);
@@ -1060,7 +1060,7 @@ static int omap_8250_rx_dma(struct uart_8250_port *p)
if (priv->habit & UART_HAS_RHR_IT_DIS) {
reg = serial_in(p, UART_OMAP_IER2);
reg |= UART_OMAP_IER2_RHR_IT_DIS;
- serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS);
+ serial_out(p, UART_OMAP_IER2, reg);
}
dma_async_issue_pending(dma->rxchan);
--
2.41.0
next reply other threads:[~2023-10-30 19:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-30 18:20 Ronald Wahl [this message]
2023-10-31 6:01 ` [PATCH] serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231030182044.14056-1-rwahl@gmx.de \
--to=rwahl@gmx.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=ronald.wahl@raritan.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox