From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Subject: [PATCH] serial: imx: stop casting struct uart_port to struct imx_port
Date: Tue, 28 May 2024 11:40:21 +0200 [thread overview]
Message-ID: <20240528094022.2161066-1-linux@rasmusvillemoes.dk> (raw)
struct imx_port does have a struct uart_port as its first member, so
the current code works, but it is not how kernel code is usually
written.
Similar to many other serial drivers, introduce and use a
to_imx_port() helper based on container_of(). No functional change.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
drivers/tty/serial/imx.c | 41 ++++++++++++++++++++++------------------
1 file changed, 23 insertions(+), 18 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 2eb22594960f..f5cfe5571e0e 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -264,6 +264,11 @@ static const struct of_device_id imx_uart_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
+static inline struct imx_port *to_imx_port(struct uart_port *port)
+{
+ return container_of(port, struct imx_port, port);
+}
+
static inline void imx_uart_writel(struct imx_port *sport, u32 val, u32 offset)
{
writel(val, sport->port.membase + offset);
@@ -377,7 +382,7 @@ static void imx_uart_disable_loopback_rs485(struct imx_port *sport)
/* called with port.lock taken and irqs off */
static void imx_uart_start_rx(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
unsigned int ucr1, ucr2;
ucr1 = imx_uart_readl(sport, UCR1);
@@ -401,7 +406,7 @@ static void imx_uart_start_rx(struct uart_port *port)
/* called with port.lock taken and irqs off */
static void imx_uart_stop_tx(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
u32 ucr1, ucr4, usr2;
if (sport->tx_state == OFF)
@@ -466,7 +471,7 @@ static void imx_uart_stop_tx(struct uart_port *port)
static void imx_uart_stop_rx_with_loopback_ctrl(struct uart_port *port, bool loopback)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
u32 ucr1, ucr2, ucr4, uts;
ucr1 = imx_uart_readl(sport, UCR1);
@@ -511,7 +516,7 @@ static void imx_uart_stop_rx(struct uart_port *port)
/* called with port.lock taken and irqs off */
static void imx_uart_enable_ms(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
mod_timer(&sport->timer, jiffies);
@@ -662,7 +667,7 @@ static void imx_uart_dma_tx(struct imx_port *sport)
/* called with port.lock taken and irqs off */
static void imx_uart_start_tx(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
struct tty_port *tport = &sport->port.state->port;
u32 ucr1;
@@ -1043,7 +1048,7 @@ static irqreturn_t imx_uart_int(int irq, void *dev_id)
*/
static unsigned int imx_uart_tx_empty(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
unsigned int ret;
ret = (imx_uart_readl(sport, USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0;
@@ -1058,7 +1063,7 @@ static unsigned int imx_uart_tx_empty(struct uart_port *port)
/* called with port.lock taken and irqs off */
static unsigned int imx_uart_get_mctrl(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
unsigned int ret = imx_uart_get_hwmctrl(sport);
mctrl_gpio_get(sport->gpios, &ret);
@@ -1069,7 +1074,7 @@ static unsigned int imx_uart_get_mctrl(struct uart_port *port)
/* called with port.lock taken and irqs off */
static void imx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
u32 ucr3, uts;
if (!(port->rs485.flags & SER_RS485_ENABLED)) {
@@ -1112,7 +1117,7 @@ static void imx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
*/
static void imx_uart_break_ctl(struct uart_port *port, int break_state)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
unsigned long flags;
u32 ucr1;
@@ -1434,7 +1439,7 @@ static void imx_uart_disable_dma(struct imx_port *sport)
static int imx_uart_startup(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
int retval;
unsigned long flags;
int dma_is_inited = 0;
@@ -1548,7 +1553,7 @@ static int imx_uart_startup(struct uart_port *port)
static void imx_uart_shutdown(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
unsigned long flags;
u32 ucr1, ucr2, ucr4, uts;
@@ -1622,7 +1627,7 @@ static void imx_uart_shutdown(struct uart_port *port)
/* called with port.lock taken and irqs off */
static void imx_uart_flush_buffer(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
struct scatterlist *sgl = &sport->tx_sgl[0];
if (!sport->dma_chan_tx)
@@ -1649,7 +1654,7 @@ static void
imx_uart_set_termios(struct uart_port *port, struct ktermios *termios,
const struct ktermios *old)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
unsigned long flags;
u32 ucr2, old_ucr2, ufcr;
unsigned int baud, quot;
@@ -1852,7 +1857,7 @@ imx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
static int imx_uart_poll_init(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
unsigned long flags;
u32 ucr1, ucr2;
int retval;
@@ -1901,7 +1906,7 @@ static int imx_uart_poll_init(struct uart_port *port)
static int imx_uart_poll_get_char(struct uart_port *port)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
if (!(imx_uart_readl(sport, USR2) & USR2_RDR))
return NO_POLL_CHAR;
@@ -1910,7 +1915,7 @@ static int imx_uart_poll_get_char(struct uart_port *port)
static void imx_uart_poll_put_char(struct uart_port *port, unsigned char c)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
unsigned int status;
/* drain */
@@ -1932,7 +1937,7 @@ static void imx_uart_poll_put_char(struct uart_port *port, unsigned char c)
static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termios,
struct serial_rs485 *rs485conf)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
u32 ucr2;
if (rs485conf->flags & SER_RS485_ENABLED) {
@@ -1986,7 +1991,7 @@ static struct imx_port *imx_uart_ports[UART_NR];
#if IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE)
static void imx_uart_console_putchar(struct uart_port *port, unsigned char ch)
{
- struct imx_port *sport = (struct imx_port *)port;
+ struct imx_port *sport = to_imx_port(port);
while (imx_uart_readl(sport, imx_uart_uts_reg(sport)) & UTS_TXFULL)
barrier();
--
2.40.1.1.g1c60b9335d
next reply other threads:[~2024-05-28 9:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-28 9:40 Rasmus Villemoes [this message]
2024-05-28 10:25 ` [PATCH] serial: imx: stop casting struct uart_port to struct imx_port Ilpo Järvinen
2024-05-28 13:19 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240528094022.2161066-1-linux@rasmusvillemoes.dk \
--to=linux@rasmusvillemoes.dk \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=imx@lists.linux.dev \
--cc=jirislaby@kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox