From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.gentoo.org (woodpecker.gentoo.org [140.211.166.183]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id EAE1412F373; Sat, 6 Jul 2024 14:24:09 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=140.211.166.183 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720275852; cv=none; b=GrEwp/rBmqhAmtI9dKYtlpwFw/qln+FzRiUbbKHqvNli75lJHczj61ZirZrBnaCX3huO8pFku0wfQ2T+xvUmi1yeopJVqPiKdeQy/ylYECS07pVcAto5llNMDWsasqe+hJFRlOr1xPR/+bw73jeLGF5kWfBTXQXnKcDkSy3vhI4= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720275852; c=relaxed/simple; bh=PBsPO+YKSohn+zPrkJZTxqbLvA5nZ887JQZQarjYxXE=; h=Date:From:To:Cc:Subject:Message-ID:References:MIME-Version: Content-Type:Content-Disposition:In-Reply-To; b=EcRByoT//nrqqFOXsF8PMXL8LLyMX5xRGiNz9YsPievnzFtgr95PztAJIDOuYihOVvBFc6nnqtUajUBmwvYCEPdfRRU2XG1jiLpw8fh2SDhNKeJTq+/pKt8QHZAT5JaEXTGyycKcLmMcaQtyAM9DnaHqSsWqpByjGT8svI6s3ls= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gentoo.org; spf=pass smtp.mailfrom=gentoo.org; arc=none smtp.client-ip=140.211.166.183 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gentoo.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gentoo.org Date: Sat, 6 Jul 2024 14:24:03 +0000 From: Yixun Lan To: Jisheng Zhang Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Conor Dooley , Paul Walmsley , Palmer Dabbelt , Albert Ou , Daniel Lezcano , Thomas Gleixner , Samuel Holland , Anup Patel , Greg Kroah-Hartman , Jiri Slaby , Lubomir Rintel , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Yangyu Chen , Inochi Amaoto , linux-serial@vger.kernel.org, linux-riscv@lists.infradead.org, Meng Zhang Subject: Re: [PATCH v3 08/11] riscv: dts: add initial SpacemiT K1 SoC device tree Message-ID: <20240706142403.GYA4138928.dlan.gentoo> References: <20240703-k1-01-basic-dt-v3-0-12f73b47461e@gentoo.org> <20240703-k1-01-basic-dt-v3-8-12f73b47461e@gentoo.org> <20240705063839.GA3042186@ofsar> <20240706050556.GA3590714@ofsar> Precedence: bulk X-Mailing-List: linux-serial@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: On 18:40 Sat 06 Jul , Jisheng Zhang wrote: > On Sat, Jul 06, 2024 at 05:05:56AM +0000, Yixun Lan wrote: > > > > On 12:12 Sat 06 Jul , Jisheng Zhang wrote: > > > On Fri, Jul 05, 2024 at 06:38:39AM +0000, Yixun Lan wrote: > > > > > > > > On 21:46 Thu 04 Jul , Jisheng Zhang wrote: > > > > > On Wed, Jul 03, 2024 at 02:55:11PM +0000, Yixun Lan wrote: > > > > > > From: Yangyu Chen > > > > > > > > > > > > Banana Pi BPI-F3 motherboard is powered by SpacemiT K1[1]. > > > > > > > > > > > > Key features: > > > > > > - 4 cores per cluster, 2 clusters on chip > > > > > > - UART IP is Intel XScale UART > > > > > > > > > > > > Some key considerations: > > > > > > - ISA string is inferred from vendor documentation[2] > > > > > > - Cluster topology is inferred from datasheet[1] and L2 in vendor dts[3] > > > > > > - No coherent DMA on this board > > > > > > Inferred by taking vendor ethernet and MMC drivers to the mainline > > > > > > kernel. Without dma-noncoherent in soc node, the driver fails. > > > > > > - No cache nodes now > > > > > > The parameters from vendor dts are likely to be wrong. It has 512 > > > > > > sets for a 32KiB L1 Cache. In this case, each set is 64B in size. > > > > > > When the size of the cache line is 64B, it is a directly mapped > > > > > > cache rather than a set-associative cache, the latter is commonly > > > > > > used. Thus, I didn't use the parameters from vendor dts. > > > > > > > > > > > > Currently only support booting into console with only uart, other > > > > > > features will be added soon later. > > > > > > > > > > > > Link: https://docs.banana-pi.org/en/BPI-F3/SpacemiT_K1_datasheet [1] > > > > > > Link: https://developer.spacemit.com/#/documentation?token=BWbGwbx7liGW21kq9lucSA6Vnpb [2] > > > > > > Link: https://gitee.com/bianbu-linux/linux-6.1/blob/bl-v1.0.y/arch/riscv/boot/dts/spacemit/k1-x.dtsi [3] > > > > > > Signed-off-by: Yangyu Chen > > > > > > Signed-off-by: Yixun Lan > > > > > > --- > > > > > > arch/riscv/boot/dts/spacemit/k1.dtsi | 376 +++++++++++++++++++++++++++++++++++ > > > > > > 1 file changed, 376 insertions(+) > > > > > > > > > > > > diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi > > > > > > new file mode 100644 > > > > > > index 0000000000000..a076e35855a2e > > > > > > --- /dev/null > > > > > > +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi > > > > > > @@ -0,0 +1,376 @@ > > > > > > +// SPDX-License-Identifier: GPL-2.0 OR MIT > > > > > > +/* > > > > > > + * Copyright (C) 2024 Yangyu Chen > > > > > > + */ > > > > > > + > > > > > > +/dts-v1/; > > > > > > +/ { > > > > > > + #address-cells = <2>; > > > > > > + #size-cells = <2>; > > > > > > + model = "SpacemiT K1"; > > > > > > + compatible = "spacemit,k1"; > > > > > > + > > > > > > + > ... > > > > > > + soc { > > > > > > + compatible = "simple-bus"; > > > > > > + interrupt-parent = <&plic>; > > > > > > + #address-cells = <2>; > > > > > > + #size-cells = <2>; > > > > > > + dma-noncoherent; > > > > > > + ranges; > > > > > > + > > > > > > + uart0: serial@d4017000 { > > > > > > + compatible = "spacemit,k1-uart", "intel,xscale-uart"; > > > > > > > > > > no, this is not a correct hw modeling. The doc on spacemit says > > > > > all the uart support 64 bytes FIFO, declaring xscale only makes > > > > > use of 32 bytes FIFO. > > > > yes, I also noticed it's 64 bytes FIFO > > > > > > > > > > > > > > IIRC, 8250_pxa is a xscale uart with 64 bytes FIFO, so this should be > > > > > "mrvl,pxa-uart" or "mrvl,mmp-uart" > > > > > > > > > > > > for mrvl,pxa-uart, I think you imply to use drivers/tty/serial/8250/8250_pxa.c, > > > > which turn out doesn't work on k1 SoC, for the record, we need to adjust > > > > > > Really? I just tried "mrvl,pxa-uart" with rc6, it works perfectly, and the FIFO > > > in the driver logic is 64bytes now. Am I misssing something or you never tried it? > > > > > Ok, I realised it's the clock issue > > > > still, I'm not fully convinced about using "mrvl,pxa-uart", > > e.g this driver hardcoded tz_loadsz to 32, not sure if K1 suffer same problem > > 5208e7ced520 ("serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ level") > > I believe the problem commit 5208e7ced520 tries to solve is: the > mmp|pxa-uart only support threshold up to 32Bytes, tz_loadsz will be > fifo size by default, this will cause probleme with 64Bytes FIFO. > yes, exactly > > > > also, what's the preference when choosing driver between 8250_pxa.c vs 8250_of.c? > > Good question. I have no preference. But there are two problems with > 8250_of, I have sent out patches[1][2] to address them. > > After these two patches, both the earlycon and uart FIFO logic work too > with below dts properties: > uart0: serial@d4017000 { > compatible = "mrvl,mmp-uart"; to be precise, I think here should be compatible = "mrvl,mmp-uart", "intel,xscale-uart" but can you check this patch below? it should be ok with your two proposed patches applied https://lore.kernel.org/all/20240703-k1-01-basic-dt-v3-6-12f73b47461e@gentoo.org/ > ... > reg-shift = <2>; > reg-io-width = <4>; > tx-threshold = <32>; > fifo-size = <64>; .. > no-loopback-test; need to check, from vendor docs, there is a loopback mode see 16.2.4.1 SSCR register description, bit12 https://developer.spacemit.com/#/documentation?token=Rn9Kw3iFHirAMgkIpTAcV2Arnkf > ... > } > > Link: https://lore.kernel.org/linux-riscv/20240706082928.2238-1-jszhang@kernel.org/ [1] I have some comments for this patch, and I believe it's a valid fix, without this patch, K1 will also have problem duo to "UART_CAP_UUE | UART_CAP_RTOIE" lost > Link: https://lore.kernel.org/linux-riscv/20240706101856.3077-1-jszhang@kernel.org/ [2] > > > it occur to me that 8250_pxa.c is more specially tailored for pxa hardware, while > > 8250_of.c is more generic.. besides, should we consider one more step if we want to > > there's a work around for Erratum #74 in 8250_pxa, while I believe the do you have any link for this Erratum? let's double check it.. > Errata doesn't exisit in K1, so from this PoV it seems 8250_of is > better, no? > > > support DMA mode in the future (vendor uart driver has DMA support)? > > Adding dma engine support to 8250_of is doable. Ok, sounds good to me > > > > > > > > > drivers/tty/serial/8250/Kconfig to enable the driver for ARCH_SPACEMIT, > > > > and change uart compatible to "spacemit,k1-uart", "mrvl,pxa-uart" > > > > > > > > for mrvl,mmp-uart, I see two choices, one using 8250_pxa.c which has same result > > > > as mrvl,pxa-uart, another choice would using the driver of 8250_of.c > > > > and it work as same as "intel,xscale-uart", I don't see any difference.. > > > > > > > > P.S: there is possibly a side problem that "mrvl,mmp-uart" from 8250_of.c doesn't > > > > really compatile with "mrvl,mmp-uart" from 8250_pxa.c, but I think it's another story > > > > -- > > Yixun Lan (dlan) > > Gentoo Linux Developer > > GPG Key ID AABEFD55 -- Yixun Lan (dlan) Gentoo Linux Developer GPG Key ID AABEFD55