[PATCH 2/8] serial: qcom-geni: fix false console tx restart

[Johan Hovold <johan+linaro@kernel.org>]

Commit 663abb1a7a7f ("tty: serial: qcom_geni_serial: Fix UART hang")
addressed an issue with stalled tx after the console code interrupted
the last bytes of a tx command by reenabling the watermark interrupt if
there is data in write buffer. This can however break software flow
control by re-enabling tx after the user has stopped it.

Address the original issue by not clearing the CMD_DONE flag after
polling for command completion. This allows the interrupt handler to
start another transfer when the CMD_DONE interrupt has not been disabled
due to flow control.

Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Fixes: 663abb1a7a7f ("tty: serial: qcom_geni_serial: Fix UART hang")
Cc: stable@vger.kernel.org	# 4.17
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index e1926124339d..0af4a93c0af5 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -314,18 +314,16 @@ static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size)
 static void qcom_geni_serial_poll_tx_done(struct uart_port *uport)
 {
 	int done;
-	u32 irq_clear = M_CMD_DONE_EN;
 
 	done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
 						M_CMD_DONE_EN, true);
 	if (!done) {
 		writel(M_GENI_CMD_ABORT, uport->membase +
 						SE_GENI_M_CMD_CTRL_REG);
-		irq_clear |= M_CMD_ABORT_EN;
 		qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
 							M_CMD_ABORT_EN, true);
+		writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
 	}
-	writel(irq_clear, uport->membase + SE_GENI_M_IRQ_CLEAR);
 }
 
 static void qcom_geni_serial_abort_rx(struct uart_port *uport)
@@ -386,6 +384,7 @@ static void qcom_geni_serial_poll_put_char(struct uart_port *uport,
 							unsigned char c)
 {
 	writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG);
+	writel(M_CMD_DONE_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
 	qcom_geni_serial_setup_tx(uport, 1);
 	WARN_ON(!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
 						M_TX_FIFO_WATERMARK_EN, true));
@@ -430,6 +429,7 @@ __qcom_geni_serial_console_write(struct uart_port *uport, const char *s,
 	}
 
 	writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG);
+	writel(M_CMD_DONE_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
 	qcom_geni_serial_setup_tx(uport, bytes_to_send);
 	for (i = 0; i < count; ) {
 		size_t chars_to_write = 0;
@@ -471,7 +471,6 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s,
 	bool locked = true;
 	unsigned long flags;
 	u32 geni_status;
-	u32 irq_en;
 
 	WARN_ON(co->index < 0 || co->index >= GENI_UART_CONS_PORTS);
 
@@ -503,12 +502,6 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s,
 		 * has been sent, in which case we need to look for done first.
 		 */
 		qcom_geni_serial_poll_tx_done(uport);
-
-		if (!kfifo_is_empty(&uport->state->port.xmit_fifo)) {
-			irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
-			writel(irq_en | M_TX_FIFO_WATERMARK_EN,
-					uport->membase + SE_GENI_M_IRQ_EN);
-		}
 	}
 
 	__qcom_geni_serial_console_write(uport, s, count);
-- 
2.44.2