From: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
To: gregkh@linuxfoundation.org
Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
"Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Subject: [PATCH v2 18/31] tty: moxa: drop version dump to logs
Date: Mon, 17 Mar 2025 08:00:33 +0100 [thread overview]
Message-ID: <20250317070046.24386-19-jirislaby@kernel.org> (raw)
In-Reply-To: <20250317070046.24386-1-jirislaby@kernel.org>
The arbitrary MOXA_VERSION is dumped to the logs when the driver is
loaded. Avoid this as a driver should be silent unless something breaks.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
---
drivers/tty/moxa.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index ebaada8db929..2b75ca12cbc9 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -347,8 +347,6 @@
#define MX_PARMARK 0xA0
#define MX_PARSPACE 0x20
-#define MOXA_VERSION "6.0k"
-
#define MOXA_FW_HDRLEN 32
#define MOXAMAJOR 172
@@ -1327,9 +1325,6 @@ static int __init moxa_init(void)
struct moxa_board_conf *brd = moxa_boards;
unsigned int i;
- printk(KERN_INFO "MOXA Intellio family driver version %s\n",
- MOXA_VERSION);
-
tty_port_init(&moxa_service_port);
moxaDriver = tty_alloc_driver(MAX_PORTS + 1,
--
2.49.0
next prev parent reply other threads:[~2025-03-17 7:01 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-17 7:00 [PATCH v2 00/31] tty: cleanup no. 99 Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 01/31] tty: convert "TTY Struct Flags" to an enum Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 02/31] tty: audit: do not use N_TTY_BUF_SIZE Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 03/31] tty: caif: " Jiri Slaby (SUSE)
2025-03-20 11:17 ` Simon Horman
2025-03-17 7:00 ` [PATCH v2 04/31] tty: move N_TTY_BUF_SIZE to n_tty Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 05/31] tty: n_tty: use uint for space returned by tty_write_room() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 06/31] tty: n_tty: simplify process_output() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 07/31] tty: n_tty: clean up process_output_block() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 08/31] tty: n_tty: drop n_tty_trace() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 09/31] tty: n_tty: extract n_tty_continue_cookie() from n_tty_read() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 10/31] tty: n_tty: extract n_tty_wait_for_input() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 11/31] tty: n_tty: move more_to_be_read to the end of n_tty_read() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 12/31] tty: tty_driver: move TTY macros to the top Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 13/31] tty: tty_driver: convert "TTY Driver Flags" to an enum Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 14/31] tty: tty_driver: document both {,__}tty_alloc_driver() properly Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 15/31] tty: tty_driver: introduce TTY driver sub/types enums Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 16/31] tty: serdev: drop serdev_controller_ops::write_room() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 17/31] tty: mmc: sdio: use bool for cts and remove parentheses Jiri Slaby (SUSE)
2025-03-17 10:50 ` Ulf Hansson
2025-03-17 7:00 ` Jiri Slaby (SUSE) [this message]
2025-03-17 7:00 ` [PATCH v2 19/31] tty: moxa: drop ISA support Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 20/31] tty: moxa: carve out special ioctls and extra tty_port Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 21/31] tty: srmcons: fix retval from srmcons_init() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 22/31] tty: staging/greybus: pass tty_driver flags to tty_alloc_driver() Jiri Slaby (SUSE)
2025-03-17 12:35 ` Alex Elder
2025-03-17 7:00 ` [PATCH v2 23/31] tty: sunsu: drop serial_{in,out}p() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 24/31] tty: sunsu: remove unused serial_icr_read() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 25/31] serial: remove redundant tty_port_link_device() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 26/31] serial: pass struct uart_state to uart_line_info() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 27/31] serial: 8250: use serial_port_in/out() helpers Jiri Slaby (SUSE)
2025-03-17 7:25 ` Andy Shevchenko
2025-03-17 7:42 ` Jiri Slaby
2025-03-17 7:00 ` [PATCH v2 28/31] serial: 8250_rsa: simplify rsa8250_{request/release}_resource() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 29/31] serial: 8250_port: do not use goto for UPQ_NO_TXEN_TEST code flow Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 30/31] serial: 8250_port: simplify serial8250_request_std_resource() Jiri Slaby (SUSE)
2025-03-17 7:00 ` [PATCH v2 31/31] serial: switch change_irq and change_port to bool in uart_set_info() Jiri Slaby (SUSE)
2025-03-17 7:03 ` [PATCH v2 00/31] tty: cleanup no. 99 Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250317070046.24386-19-jirislaby@kernel.org \
--to=jirislaby@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox