[PATCH v7 03/13] dt-bindings: serial: Add compatible for Renesas RZ/T2H SoC in sci

[PATCH v7 03/13] dt-bindings: serial: Add compatible for Renesas RZ/T2H SoC in sci

[Thierry Bultel]

RSCI of RZ/T2H SoC (a.k.a r9a09g077), as a lot
of similarities with SCI in other Renesas SoC like G2L, G3S, V2L;
However, it has a different set of registers, and in addition to serial,
this IP also supports SCIe (encoder), SmartCard, i2c and spi.
This is why the 'renesas,sci' fallback for generic SCI does not apply for it.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v6->v7: 
  - Moved all rsci in a separate file
  - Added example
Changes v5->v6: none
Changes v4->v5: none
Changes v3->v4:
  - Added more details in commit description about why renesas,sci 
    does not apply.
  - Removed uart-has-rtscts for !rzsci.
----
 .../bindings/serial/renesas,rsci.yaml         | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/renesas,rsci.yaml

diff --git a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
new file mode 100644
index 000000000000..ea879db5f485
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/renesas,rsci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RSCI Serial Communication Interface
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: renesas,r9a09g077-rsci      # RZ/T2H
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Error interrupt
+      - description: Receive buffer full interrupt
+      - description: Transmit buffer empty interrupt
+      - description: Transmit end interrupt
+
+  interrupt-names:
+    items:
+      - const: eri
+      - const: rxi
+      - const: txi
+      - const: tei
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck # UART functional clock
+
+  power-domains:
+    maxItems: 1
+
+  uart-has-rtscts: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+    aliases {
+        serial0 = &sci0;
+    };
+
+    sci0: serial@80005000 {
+        compatible = "renesas,r9a09g077-rsci";
+        reg = <0x80005000 0x400>;
+        interrupts = <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 591 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "eri", "rxi", "txi", "tei";
+        clocks = <&cpg CPG_MOD 108>;
+        clock-names = "fck";
+        power-domains = <&cpg>;
+    };
-- 
2.43.0

Re: [PATCH v7 03/13] dt-bindings: serial: Add compatible for Renesas RZ/T2H SoC in sci

[Geert Uytterhoeven]

Hi Thierry,

On Thu, 3 Apr 2025 at 23:29, Thierry Bultel
<thierry.bultel.yh@bp.renesas.com> wrote:
> RSCI of RZ/T2H SoC (a.k.a r9a09g077), as a lot
> of similarities with SCI in other Renesas SoC like G2L, G3S, V2L;
> However, it has a different set of registers, and in addition to serial,
> this IP also supports SCIe (encoder), SmartCard, i2c and spi.
> This is why the 'renesas,sci' fallback for generic SCI does not apply for it.
>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
> ---
> Changes v6->v7:
>   - Moved all rsci in a separate file
>   - Added example

Thanks for your patch, which is now commit 25422e8f46c1fd14
("dt-bindings: serial: Add compatible for Renesas RZ/T2H SoC in sci")
in tty/tty-next.

> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml

> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/renesas-cpg-mssr.h>
> +
> +    aliases {
> +        serial0 = &sci0;
> +    };

Aliases are not really needed in examples; the DT janitors may send
a patch to remove this ;-).

> +
> +    sci0: serial@80005000 {
> +        compatible = "renesas,r9a09g077-rsci";
> +        reg = <0x80005000 0x400>;
> +        interrupts = <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 591 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "eri", "rxi", "txi", "tei";
> +        clocks = <&cpg CPG_MOD 108>;

Shouldn't that be 8 instead of 108?
Doesn't matter much, as this file is just an example...

> +        clock-names = "fck";
> +        power-domains = <&cpg>;
> +    };

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v7 07/13] serial: sh-sci: Fix a comment about SCIFA

[Thierry Bultel]

The comment was correct when it was added, at that time RZ/T1 was
the only SoC in the RZ/T line. Since then, further SoCs have been
added with RZ/T names which do not use the same SCIFA register
layout and so the comment is now misleading.

So we update the comment to explicitly reference only RZ/T1 SoCs.

Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v6->v7: none
Changes v5->v6: none
Changes v4->v5: none
Changes v3->v4: none
---
 drivers/tty/serial/sh-sci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 1c8480d0338e..d7a060033a89 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -310,7 +310,7 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 	},
 
 	/*
-	 * The "SCIFA" that is in RZ/A2, RZ/G2L and RZ/T.
+	 * The "SCIFA" that is in RZ/A2, RZ/G2L and RZ/T1.
 	 * It looks like a normal SCIF with FIFO data, but with a
 	 * compressed address space. Also, the break out of interrupts
 	 * are different: ERI/BRI, RXI, TXI, TEI, DRI.
-- 
2.43.0

[PATCH v7 08/13] serial: sh-sci: Introduced function pointers

[Thierry Bultel]

The aim here is to prepare support for new sci controllers like
the T2H/RSCI whose registers are too much different for being
handled in common code.

This named serial controller also has 32 bits register,
so some return types had to be changed.

The needed generic functions are no longer static, with prototypes
defined in sh-sci-common.h so that they can be used from specific
implementation in a separate file, to keep this driver as little
changed as possible.

For doing so, a set of 'ops' is added to struct sci_port.

Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v6->v7: none
Changes v5->v6: none
Changes v4->v5: 
   - sci_shutdown is no longer static (systemd needs it)
Changes v3->v4:
   - Add missing #include <bitfield.h>
   - Remove sci_poll_get_char sci_poll_put_char from sh-sci-common.h (both 
     function are not used by rzsci yet).
   - Add missing #ifdef around .poll_put_char pointer initialization.
   - More registers to save & restore due to rebase on tty-next
---
 drivers/tty/serial/sh-sci-common.h | 159 ++++++++++
 drivers/tty/serial/sh-sci.c        | 484 +++++++++++++++--------------
 drivers/tty/serial/sh-sci.h        |   2 -
 3 files changed, 407 insertions(+), 238 deletions(-)
 create mode 100644 drivers/tty/serial/sh-sci-common.h

diff --git a/drivers/tty/serial/sh-sci-common.h b/drivers/tty/serial/sh-sci-common.h
new file mode 100644
index 000000000000..2ed742bca83f
--- /dev/null
+++ b/drivers/tty/serial/sh-sci-common.h
@@ -0,0 +1,159 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __SH_SCI_COMMON_H__
+#define __SH_SCI_COMMON_H__
+
+#include <linux/serial_core.h>
+
+enum SCI_CLKS {
+	SCI_FCK,		/* Functional Clock */
+	SCI_SCK,		/* Optional External Clock */
+	SCI_BRG_INT,		/* Optional BRG Internal Clock Source */
+	SCI_SCIF_CLK,		/* Optional BRG External Clock Source */
+	SCI_NUM_CLKS
+};
+
+/* Offsets into the sci_port->irqs array */
+enum {
+	SCIx_ERI_IRQ,
+	SCIx_RXI_IRQ,
+	SCIx_TXI_IRQ,
+	SCIx_BRI_IRQ,
+	SCIx_DRI_IRQ,
+	SCIx_TEI_IRQ,
+	SCIx_NR_IRQS,
+
+	SCIx_MUX_IRQ = SCIx_NR_IRQS,	/* special case */
+};
+
+/* Bit x set means sampling rate x + 1 is supported */
+#define SCI_SR(x)		BIT((x) - 1)
+#define SCI_SR_RANGE(x, y)	GENMASK((y) - 1, (x) - 1)
+
+void sci_release_port(struct uart_port *port);
+int sci_request_port(struct uart_port *port);
+void sci_config_port(struct uart_port *port, int flags);
+int sci_verify_port(struct uart_port *port, struct serial_struct *ser);
+void sci_pm(struct uart_port *port, unsigned int state,
+		   unsigned int oldstate);
+
+struct plat_sci_reg {
+	u8 offset;
+	u8 size;
+};
+
+struct sci_port_params_bits {
+	unsigned int rxtx_enable;
+	unsigned int te_clear;
+	unsigned int poll_sent_bits;
+};
+
+struct sci_common_regs {
+	unsigned int status;
+	unsigned int control;
+};
+
+/* The actual number of needed registers. This is used by sci only */
+#define SCI_NR_REGS 20
+
+struct sci_port_params {
+	const struct plat_sci_reg regs[SCI_NR_REGS];
+	const struct sci_common_regs *common_regs;
+	const struct sci_port_params_bits *param_bits;
+	unsigned int fifosize;
+	unsigned int overrun_reg;
+	unsigned int overrun_mask;
+	unsigned int sampling_rate_mask;
+	unsigned int error_mask;
+	unsigned int error_clear;
+};
+
+struct sci_port_ops {
+	u32 (*read_reg)(struct uart_port *port, int reg);
+	void (*write_reg)(struct uart_port *port, int reg, int value);
+	void (*clear_SCxSR)(struct uart_port *port, unsigned int mask);
+
+	void (*transmit_chars)(struct uart_port *port);
+	void (*receive_chars)(struct uart_port *port);
+
+	void (*poll_put_char)(struct uart_port *port, unsigned char c);
+
+	int (*set_rtrg)(struct uart_port *port, int rx_trig);
+	int (*rtrg_enabled)(struct uart_port *port);
+
+	void (*shutdown_complete)(struct uart_port *port);
+
+	void (*prepare_console_write)(struct uart_port *port, u32 ctrl);
+	void (*console_save)(struct uart_port *port);
+	void (*console_restore)(struct uart_port *port);
+	size_t (*suspend_regs_size)(void);
+};
+
+struct sci_port {
+	struct uart_port	port;
+
+	/* Platform configuration */
+	const struct sci_port_params *params;
+	const struct plat_sci_port *cfg;
+
+	unsigned int		sampling_rate_mask;
+	resource_size_t		reg_size;
+	struct mctrl_gpios	*gpios;
+
+	/* Clocks */
+	struct clk		*clks[SCI_NUM_CLKS];
+	unsigned long		clk_rates[SCI_NUM_CLKS];
+
+	int			irqs[SCIx_NR_IRQS];
+	char			*irqstr[SCIx_NR_IRQS];
+
+	struct dma_chan			*chan_tx;
+	struct dma_chan			*chan_rx;
+
+	struct reset_control		*rstc;
+	struct sci_suspend_regs		*suspend_regs;
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	struct dma_chan			*chan_tx_saved;
+	struct dma_chan			*chan_rx_saved;
+	dma_cookie_t			cookie_tx;
+	dma_cookie_t			cookie_rx[2];
+	dma_cookie_t			active_rx;
+	dma_addr_t			tx_dma_addr;
+	unsigned int			tx_dma_len;
+	struct scatterlist		sg_rx[2];
+	void				*rx_buf[2];
+	size_t				buf_len_rx;
+	struct work_struct		work_tx;
+	struct hrtimer			rx_timer;
+	unsigned int			rx_timeout;	/* microseconds */
+#endif
+	unsigned int			rx_frame;
+	int				rx_trigger;
+	struct timer_list		rx_fifo_timer;
+	int				rx_fifo_timeout;
+	u16				hscif_tot;
+
+	const struct sci_port_ops *ops;
+
+	bool has_rtscts;
+	bool autorts;
+	bool tx_occurred;
+};
+
+#define to_sci_port(uart) container_of((uart), struct sci_port, port)
+
+void sci_port_disable(struct sci_port *sci_port);
+void sci_port_enable(struct sci_port *sci_port);
+
+int sci_startup(struct uart_port *port);
+void sci_shutdown(struct uart_port *port);
+
+#define min_sr(_port)		ffs((_port)->sampling_rate_mask)
+#define max_sr(_port)		fls((_port)->sampling_rate_mask)
+
+#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
+int __init scix_early_console_setup(struct earlycon_device *device, int);
+#endif
+
+#endif /* __SH_SCI_COMMON_H__ */
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index d7a060033a89..54a484b04a97 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -56,19 +56,7 @@
 
 #include "serial_mctrl_gpio.h"
 #include "sh-sci.h"
-
-/* Offsets into the sci_port->irqs array */
-enum {
-	SCIx_ERI_IRQ,
-	SCIx_RXI_IRQ,
-	SCIx_TXI_IRQ,
-	SCIx_BRI_IRQ,
-	SCIx_DRI_IRQ,
-	SCIx_TEI_IRQ,
-	SCIx_NR_IRQS,
-
-	SCIx_MUX_IRQ = SCIx_NR_IRQS,	/* special case */
-};
+#include "sh-sci-common.h"
 
 #define SCIx_IRQ_IS_MUXED(port)			\
 	((port)->irqs[SCIx_ERI_IRQ] ==	\
@@ -76,32 +64,38 @@ enum {
 	((port)->irqs[SCIx_ERI_IRQ] &&	\
 	 ((port)->irqs[SCIx_RXI_IRQ] < 0))
 
-enum SCI_CLKS {
-	SCI_FCK,		/* Functional Clock */
-	SCI_SCK,		/* Optional External Clock */
-	SCI_BRG_INT,		/* Optional BRG Internal Clock Source */
-	SCI_SCIF_CLK,		/* Optional BRG External Clock Source */
-	SCI_NUM_CLKS
-};
-
-/* Bit x set means sampling rate x + 1 is supported */
-#define SCI_SR(x)		BIT((x) - 1)
-#define SCI_SR_RANGE(x, y)	GENMASK((y) - 1, (x) - 1)
-
 #define SCI_SR_SCIFAB		SCI_SR(5) | SCI_SR(7) | SCI_SR(11) | \
 				SCI_SR(13) | SCI_SR(16) | SCI_SR(17) | \
 				SCI_SR(19) | SCI_SR(27)
 
-#define min_sr(_port)		ffs((_port)->sampling_rate_mask)
-#define max_sr(_port)		fls((_port)->sampling_rate_mask)
-
 /* Iterate over all supported sampling rates, from high to low */
 #define for_each_sr(_sr, _port)						\
 	for ((_sr) = max_sr(_port); (_sr) >= min_sr(_port); (_sr)--)	\
 		if ((_port)->sampling_rate_mask & SCI_SR((_sr)))
 
-struct plat_sci_reg {
-	u8 offset, size;
+#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
+
+static struct sci_port sci_ports[SCI_NPORTS];
+static unsigned long sci_ports_in_use;
+static struct uart_driver sci_uart_driver;
+static bool sci_uart_earlycon;
+static bool sci_uart_earlycon_dev_probing;
+
+static const struct sci_port_params_bits sci_sci_port_params_bits = {
+	.rxtx_enable = SCSCR_RE | SCSCR_TE,
+	.te_clear = SCSCR_TE | SCSCR_TEIE,
+	.poll_sent_bits = SCI_TDRE | SCI_TEND
+};
+
+static const struct sci_port_params_bits sci_scif_port_params_bits = {
+	.rxtx_enable = SCSCR_RE | SCSCR_TE,
+	.te_clear = SCSCR_TE | SCSCR_TEIE,
+	.poll_sent_bits = SCIF_TDFE | SCIF_TEND
+};
+
+static const struct sci_common_regs sci_common_regs = {
+	.status = SCxSR,
+	.control = SCSCR,
 };
 
 struct sci_suspend_regs {
@@ -118,77 +112,9 @@ struct sci_suspend_regs {
 	u8 semr;
 };
 
-struct sci_port_params {
-	const struct plat_sci_reg regs[SCIx_NR_REGS];
-	unsigned int fifosize;
-	unsigned int overrun_reg;
-	unsigned int overrun_mask;
-	unsigned int sampling_rate_mask;
-	unsigned int error_mask;
-	unsigned int error_clear;
-};
-
-struct sci_port {
-	struct uart_port	port;
-
-	/* Platform configuration */
-	const struct sci_port_params *params;
-	const struct plat_sci_port *cfg;
-	unsigned int		sampling_rate_mask;
-	resource_size_t		reg_size;
-	struct mctrl_gpios	*gpios;
-
-	/* Clocks */
-	struct clk		*clks[SCI_NUM_CLKS];
-	unsigned long		clk_rates[SCI_NUM_CLKS];
-
-	int			irqs[SCIx_NR_IRQS];
-	char			*irqstr[SCIx_NR_IRQS];
-
-	struct dma_chan			*chan_tx;
-	struct dma_chan			*chan_rx;
-
-	struct reset_control		*rstc;
-
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-	struct dma_chan			*chan_tx_saved;
-	struct dma_chan			*chan_rx_saved;
-	dma_cookie_t			cookie_tx;
-	dma_cookie_t			cookie_rx[2];
-	dma_cookie_t			active_rx;
-	dma_addr_t			tx_dma_addr;
-	unsigned int			tx_dma_len;
-	struct scatterlist		sg_rx[2];
-	void				*rx_buf[2];
-	size_t				buf_len_rx;
-	struct work_struct		work_tx;
-	struct hrtimer			rx_timer;
-	unsigned int			rx_timeout;	/* microseconds */
-#endif
-	unsigned int			rx_frame;
-	int				rx_trigger;
-	struct timer_list		rx_fifo_timer;
-	int				rx_fifo_timeout;
-	struct sci_suspend_regs		suspend_regs;
-	u16				hscif_tot;
-
-	bool has_rtscts;
-	bool autorts;
-	bool tx_occurred;
-};
-
-#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
-
-static struct sci_port sci_ports[SCI_NPORTS];
-static unsigned long sci_ports_in_use;
-static struct uart_driver sci_uart_driver;
-static bool sci_uart_earlycon;
-static bool sci_uart_earlycon_dev_probing;
-
-static inline struct sci_port *
-to_sci_port(struct uart_port *uart)
+static size_t sci_suspend_regs_size(void)
 {
-	return container_of(uart, struct sci_port, port);
+	return sizeof(struct sci_suspend_regs);
 }
 
 static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
@@ -211,6 +137,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR(32),
 		.error_mask = SCI_DEFAULT_ERROR_MASK | SCI_ORER,
 		.error_clear = SCI_ERROR_CLEAR & ~SCI_ORER,
+		.param_bits = &sci_sci_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -233,6 +161,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR(32),
 		.error_mask = SCI_DEFAULT_ERROR_MASK | SCI_ORER,
 		.error_clear = SCI_ERROR_CLEAR & ~SCI_ORER,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -257,6 +187,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR_SCIFAB,
 		.error_mask = SCIF_DEFAULT_ERROR_MASK | SCIFA_ORER,
 		.error_clear = SCIF_ERROR_CLEAR & ~SCIFA_ORER,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -282,6 +214,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR_SCIFAB,
 		.error_mask = SCIF_DEFAULT_ERROR_MASK | SCIFA_ORER,
 		.error_clear = SCIF_ERROR_CLEAR & ~SCIFA_ORER,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -307,6 +241,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR(32),
 		.error_mask = SCIF_DEFAULT_ERROR_MASK,
 		.error_clear = SCIF_ERROR_CLEAR,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -335,6 +271,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR(32),
 		.error_mask = SCIF_DEFAULT_ERROR_MASK,
 		.error_clear = SCIF_ERROR_CLEAR,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -366,6 +304,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR(32),
 		.error_mask = SCIF_DEFAULT_ERROR_MASK,
 		.error_clear = SCIF_ERROR_CLEAR,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -388,6 +328,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR(32),
 		.error_mask = SCIF_DEFAULT_ERROR_MASK,
 		.error_clear = SCIF_ERROR_CLEAR,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -412,6 +354,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR(32),
 		.error_mask = SCIF_DEFAULT_ERROR_MASK,
 		.error_clear = SCIF_ERROR_CLEAR,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -439,6 +383,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR(32),
 		.error_mask = SCIF_DEFAULT_ERROR_MASK,
 		.error_clear = SCIF_ERROR_CLEAR,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -468,6 +414,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR_RANGE(8, 32),
 		.error_mask = SCIF_DEFAULT_ERROR_MASK,
 		.error_clear = SCIF_ERROR_CLEAR,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -492,6 +440,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR(32),
 		.error_mask = SCIF_DEFAULT_ERROR_MASK,
 		.error_clear = SCIF_ERROR_CLEAR,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -519,6 +469,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR(32),
 		.error_mask = SCIF_DEFAULT_ERROR_MASK,
 		.error_clear = SCIF_ERROR_CLEAR,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 
 	/*
@@ -542,6 +494,8 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.sampling_rate_mask = SCI_SR(16),
 		.error_mask = SCIF_DEFAULT_ERROR_MASK | SCIFA_ORER,
 		.error_clear = SCIF_ERROR_CLEAR & ~SCIFA_ORER,
+		.param_bits = &sci_scif_port_params_bits,
+		.common_regs = &sci_common_regs,
 	},
 };
 
@@ -579,7 +533,7 @@ static void sci_serial_out(struct uart_port *p, int offset, int value)
 		WARN(1, "Invalid register access\n");
 }
 
-static void sci_port_enable(struct sci_port *sci_port)
+void sci_port_enable(struct sci_port *sci_port)
 {
 	unsigned int i;
 
@@ -595,7 +549,7 @@ static void sci_port_enable(struct sci_port *sci_port)
 	sci_port->port.uartclk = sci_port->clk_rates[SCI_FCK];
 }
 
-static void sci_port_disable(struct sci_port *sci_port)
+void sci_port_disable(struct sci_port *sci_port)
 {
 	unsigned int i;
 
@@ -735,12 +689,13 @@ static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask)
 static int sci_poll_get_char(struct uart_port *port)
 {
 	unsigned short status;
+	struct sci_port *s = to_sci_port(port);
 	int c;
 
 	do {
 		status = sci_serial_in(port, SCxSR);
 		if (status & SCxSR_ERRORS(port)) {
-			sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
+			s->ops->clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
 			continue;
 		}
 		break;
@@ -753,7 +708,7 @@ static int sci_poll_get_char(struct uart_port *port)
 
 	/* Dummy read */
 	sci_serial_in(port, SCxSR);
-	sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
+	s->ops->clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
 
 	return c;
 }
@@ -761,14 +716,16 @@ static int sci_poll_get_char(struct uart_port *port)
 
 static void sci_poll_put_char(struct uart_port *port, unsigned char c)
 {
-	unsigned short status;
+	struct sci_port *s = to_sci_port(port);
+	const struct sci_common_regs *regs = s->params->common_regs;
+	unsigned int status;
 
 	do {
-		status = sci_serial_in(port, SCxSR);
+		status = s->ops->read_reg(port, regs->status);
 	} while (!(status & SCxSR_TDxE(port)));
 
 	sci_serial_out(port, SCxTDR, c);
-	sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
+	s->ops->clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
 }
 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE ||
 	  CONFIG_SERIAL_SH_SCI_EARLYCON */
@@ -911,7 +868,7 @@ static void sci_transmit_chars(struct uart_port *port)
 		port->icount.tx++;
 	} while (--count > 0);
 
-	sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
+	s->ops->clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
 
 	if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
@@ -930,6 +887,7 @@ static void sci_transmit_chars(struct uart_port *port)
 static void sci_receive_chars(struct uart_port *port)
 {
 	struct tty_port *tport = &port->state->port;
+	struct sci_port *s = to_sci_port(port);
 	int i, count, copied = 0;
 	unsigned short status;
 	unsigned char flag;
@@ -984,7 +942,7 @@ static void sci_receive_chars(struct uart_port *port)
 		}
 
 		sci_serial_in(port, SCxSR); /* dummy read */
-		sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
+		s->ops->clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
 
 		copied += count;
 		port->icount.rx += count;
@@ -997,16 +955,17 @@ static void sci_receive_chars(struct uart_port *port)
 		/* TTY buffers full; read from RX reg to prevent lockup */
 		sci_serial_in(port, SCxRDR);
 		sci_serial_in(port, SCxSR); /* dummy read */
-		sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
+		s->ops->clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
 	}
 }
 
 static int sci_handle_errors(struct uart_port *port)
 {
 	int copied = 0;
-	unsigned short status = sci_serial_in(port, SCxSR);
-	struct tty_port *tport = &port->state->port;
 	struct sci_port *s = to_sci_port(port);
+	const struct sci_common_regs *regs = s->params->common_regs;
+	unsigned int status = s->ops->read_reg(port, regs->status);
+	struct tty_port *tport = &port->state->port;
 
 	/* Handle overruns */
 	if (status & s->params->overrun_mask) {
@@ -1165,7 +1124,7 @@ static void rx_fifo_timer_fn(struct timer_list *t)
 	struct uart_port *port = &s->port;
 
 	dev_dbg(port->dev, "Rx timed out\n");
-	scif_set_rtrg(port, 1);
+	s->ops->set_rtrg(port, 1);
 }
 
 static ssize_t rx_fifo_trigger_show(struct device *dev,
@@ -1190,9 +1149,9 @@ static ssize_t rx_fifo_trigger_store(struct device *dev,
 	if (ret)
 		return ret;
 
-	sci->rx_trigger = scif_set_rtrg(port, r);
+	sci->rx_trigger = sci->ops->set_rtrg(port, r);
 	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
-		scif_set_rtrg(port, 1);
+		sci->ops->set_rtrg(port, 1);
 
 	return count;
 }
@@ -1235,7 +1194,7 @@ static ssize_t rx_fifo_timeout_store(struct device *dev,
 		sci->hscif_tot = r << HSSCR_TOT_SHIFT;
 	} else {
 		sci->rx_fifo_timeout = r;
-		scif_set_rtrg(port, 1);
+		sci->ops->set_rtrg(port, 1);
 		if (r > 0)
 			timer_setup(&sci->rx_fifo_timer, rx_fifo_timer_fn, 0);
 	}
@@ -1360,7 +1319,7 @@ static void sci_dma_rx_reenable_irq(struct sci_port *s)
 	    s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
 		enable_irq(s->irqs[SCIx_RXI_IRQ]);
 		if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
-			scif_set_rtrg(port, s->rx_trigger);
+			s->ops->set_rtrg(port, s->rx_trigger);
 		else
 			scr &= ~SCSCR_RDRQE;
 	}
@@ -1798,7 +1757,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 		    s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
 			disable_irq_nosync(s->irqs[SCIx_RXI_IRQ]);
 			if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
-				scif_set_rtrg(port, 1);
+				s->ops->set_rtrg(port, 1);
 				scr |= SCSCR_RIE;
 			} else {
 				scr |= SCSCR_RDRQE;
@@ -1824,8 +1783,8 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 #endif
 
 	if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0) {
-		if (!scif_rtrg_enabled(port))
-			scif_set_rtrg(port, s->rx_trigger);
+		if (!s->ops->rtrg_enabled(port))
+			s->ops->set_rtrg(port, s->rx_trigger);
 
 		mod_timer(&s->rx_fifo_timer, jiffies + DIV_ROUND_UP(
 			  s->rx_frame * HZ * s->rx_fifo_timeout, 1000000));
@@ -1835,7 +1794,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 	 * of whether the I_IXOFF is set, otherwise, how is the interrupt
 	 * to be disabled?
 	 */
-	sci_receive_chars(port);
+	s->ops->receive_chars(port);
 
 	return IRQ_HANDLED;
 }
@@ -1844,9 +1803,10 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
 {
 	struct uart_port *port = ptr;
 	unsigned long flags;
+	struct sci_port *s = to_sci_port(port);
 
 	uart_port_lock_irqsave(port, &flags);
-	sci_transmit_chars(port);
+	s->ops->transmit_chars(port);
 	uart_port_unlock_irqrestore(port, flags);
 
 	return IRQ_HANDLED;
@@ -1855,16 +1815,18 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
 static irqreturn_t sci_tx_end_interrupt(int irq, void *ptr)
 {
 	struct uart_port *port = ptr;
+	struct sci_port *s = to_sci_port(port);
+	const struct sci_common_regs *regs = s->params->common_regs;
 	unsigned long flags;
-	unsigned short ctrl;
+	u32 ctrl;
 
 	if (port->type != PORT_SCI)
 		return sci_tx_interrupt(irq, ptr);
 
 	uart_port_lock_irqsave(port, &flags);
-	ctrl = sci_serial_in(port, SCSCR);
-	ctrl &= ~(SCSCR_TE | SCSCR_TEIE);
-	sci_serial_out(port, SCSCR, ctrl);
+	ctrl = s->ops->read_reg(port, regs->control) &
+		~(s->params->param_bits->te_clear);
+	s->ops->write_reg(port, regs->control, ctrl);
 	uart_port_unlock_irqrestore(port, flags);
 
 	return IRQ_HANDLED;
@@ -1873,6 +1835,7 @@ static irqreturn_t sci_tx_end_interrupt(int irq, void *ptr)
 static irqreturn_t sci_br_interrupt(int irq, void *ptr)
 {
 	struct uart_port *port = ptr;
+	struct sci_port *s = to_sci_port(port);
 
 	/* Handle BREAKs */
 	sci_handle_breaks(port);
@@ -1880,7 +1843,7 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
 	/* drop invalid character received before break was detected */
 	sci_serial_in(port, SCxRDR);
 
-	sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
+	s->ops->clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
 
 	return IRQ_HANDLED;
 }
@@ -1908,15 +1871,15 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr)
 		if (sci_handle_errors(port)) {
 			/* discard character in rx buffer */
 			sci_serial_in(port, SCxSR);
-			sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
+			s->ops->clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
 		}
 	} else {
 		sci_handle_fifo_overrun(port);
 		if (!s->chan_rx)
-			sci_receive_chars(port);
+			s->ops->receive_chars(port);
 	}
 
-	sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
+	s->ops->clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
 
 	/* Kick the transmission */
 	if (!s->chan_tx)
@@ -2286,7 +2249,17 @@ static void sci_break_ctl(struct uart_port *port, int break_state)
 	uart_port_unlock_irqrestore(port, flags);
 }
 
-static int sci_startup(struct uart_port *port)
+static void sci_shutdown_complete(struct uart_port *port)
+{
+	struct sci_port *s = to_sci_port(port);
+	u16 scr;
+
+	scr = sci_serial_in(port, SCSCR);
+	sci_serial_out(port, SCSCR,
+		       scr & (SCSCR_CKE1 | SCSCR_CKE0 | s->hscif_tot));
+}
+
+int sci_startup(struct uart_port *port)
 {
 	struct sci_port *s = to_sci_port(port);
 	int ret;
@@ -2305,11 +2278,10 @@ static int sci_startup(struct uart_port *port)
 	return 0;
 }
 
-static void sci_shutdown(struct uart_port *port)
+void sci_shutdown(struct uart_port *port)
 {
 	struct sci_port *s = to_sci_port(port);
 	unsigned long flags;
-	u16 scr;
 
 	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
 
@@ -2319,13 +2291,7 @@ static void sci_shutdown(struct uart_port *port)
 	uart_port_lock_irqsave(port, &flags);
 	sci_stop_rx(port);
 	sci_stop_tx(port);
-	/*
-	 * Stop RX and TX, disable related interrupts, keep clock source
-	 * and HSCIF TOT bits
-	 */
-	scr = sci_serial_in(port, SCSCR);
-	sci_serial_out(port, SCSCR,
-		       scr & (SCSCR_CKE1 | SCSCR_CKE0 | s->hscif_tot));
+	s->ops->shutdown_complete(port);
 	uart_port_unlock_irqrestore(port, flags);
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
@@ -2402,8 +2368,8 @@ static int sci_brg_calc(struct sci_port *s, unsigned int bps,
 
 /* calculate sample rate, BRR, and clock select */
 static int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
-			  unsigned int *brr, unsigned int *srr,
-			  unsigned int *cks)
+		   unsigned int *brr, unsigned int *srr,
+		   unsigned int *cks)
 {
 	unsigned long freq = s->clk_rates[SCI_FCK];
 	unsigned int sr, br, prediv, scrate, c;
@@ -2480,9 +2446,9 @@ static void sci_reset(struct uart_port *port)
 	if (reg->size)
 		sci_serial_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
 
-	sci_clear_SCxSR(port,
-			SCxSR_RDxF_CLEAR(port) & SCxSR_ERROR_CLEAR(port) &
-			SCxSR_BREAK_CLEAR(port));
+	s->ops->clear_SCxSR(port,
+			    SCxSR_RDxF_CLEAR(port) & SCxSR_ERROR_CLEAR(port) &
+			    SCxSR_BREAK_CLEAR(port));
 	if (sci_getreg(port, SCLSR)->size) {
 		status = sci_serial_in(port, SCLSR);
 		status &= ~(SCLSR_TO | SCLSR_ORER);
@@ -2491,14 +2457,14 @@ static void sci_reset(struct uart_port *port)
 
 	if (s->rx_trigger > 1) {
 		if (s->rx_fifo_timeout) {
-			scif_set_rtrg(port, 1);
+			s->ops->set_rtrg(port, 1);
 			timer_setup(&s->rx_fifo_timer, rx_fifo_timer_fn, 0);
 		} else {
 			if (port->type == PORT_SCIFA ||
 			    port->type == PORT_SCIFB)
-				scif_set_rtrg(port, 1);
+				s->ops->set_rtrg(port, 1);
 			else
-				scif_set_rtrg(port, s->rx_trigger);
+				s->ops->set_rtrg(port, s->rx_trigger);
 		}
 	}
 }
@@ -2758,7 +2724,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 		sci_enable_ms(port);
 }
 
-static void sci_pm(struct uart_port *port, unsigned int state,
+void sci_pm(struct uart_port *port, unsigned int state,
 		   unsigned int oldstate)
 {
 	struct sci_port *sci_port = to_sci_port(port);
@@ -2821,7 +2787,7 @@ static int sci_remap_port(struct uart_port *port)
 	return 0;
 }
 
-static void sci_release_port(struct uart_port *port)
+void sci_release_port(struct uart_port *port)
 {
 	struct sci_port *sport = to_sci_port(port);
 
@@ -2833,7 +2799,7 @@ static void sci_release_port(struct uart_port *port)
 	release_mem_region(port->mapbase, sport->reg_size);
 }
 
-static int sci_request_port(struct uart_port *port)
+int sci_request_port(struct uart_port *port)
 {
 	struct resource *res;
 	struct sci_port *sport = to_sci_port(port);
@@ -2855,7 +2821,7 @@ static int sci_request_port(struct uart_port *port)
 	return 0;
 }
 
-static void sci_config_port(struct uart_port *port, int flags)
+void sci_config_port(struct uart_port *port, int flags)
 {
 	if (flags & UART_CONFIG_TYPE) {
 		struct sci_port *sport = to_sci_port(port);
@@ -2865,7 +2831,7 @@ static void sci_config_port(struct uart_port *port, int flags)
 	}
 }
 
-static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
+int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
 	if (ser->baud_base < 2400)
 		/* No paper tape reader for Mitch.. */
@@ -2874,6 +2840,75 @@ static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 	return 0;
 }
 
+static void sci_prepare_console_write(struct uart_port *port, u32 ctrl)
+{
+	struct sci_port *s = to_sci_port(port);
+	u32 ctrl_temp =
+		s->params->param_bits->rxtx_enable |
+		(s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)) |
+		(ctrl & (SCSCR_CKE1 | SCSCR_CKE0)) |
+		s->hscif_tot;
+	sci_serial_out(port, SCSCR, ctrl_temp);
+}
+
+static void sci_console_save(struct uart_port *port)
+{
+	struct sci_port *s = to_sci_port(port);
+	struct sci_suspend_regs *regs = s->suspend_regs;
+
+	if (sci_getreg(port, SCDL)->size)
+		regs->scdl = sci_serial_in(port, SCDL);
+	if (sci_getreg(port, SCCKS)->size)
+		regs->sccks = sci_serial_in(port, SCCKS);
+	if (sci_getreg(port, SCSMR)->size)
+		regs->scsmr = sci_serial_in(port, SCSMR);
+	if (sci_getreg(port, SCSCR)->size)
+		regs->scscr = sci_serial_in(port, SCSCR);
+	if (sci_getreg(port, SCFCR)->size)
+		regs->scfcr = sci_serial_in(port, SCFCR);
+	if (sci_getreg(port, SCSPTR)->size)
+		regs->scsptr = sci_serial_in(port, SCSPTR);
+	if (sci_getreg(port, SCBRR)->size)
+		regs->scbrr = sci_serial_in(port, SCBRR);
+	if (sci_getreg(port, HSSRR)->size)
+		regs->hssrr = sci_serial_in(port, HSSRR);
+	if (sci_getreg(port, SCPCR)->size)
+		regs->scpcr = sci_serial_in(port, SCPCR);
+	if (sci_getreg(port, SCPDR)->size)
+		regs->scpdr = sci_serial_in(port, SCPDR);
+	if (sci_getreg(port, SEMR)->size)
+		regs->semr = sci_serial_in(port, SEMR);
+}
+
+static void sci_console_restore(struct uart_port *port)
+{
+	struct sci_port *s = to_sci_port(port);
+	struct sci_suspend_regs *regs = s->suspend_regs;
+
+	if (sci_getreg(port, SCDL)->size)
+		sci_serial_out(port, SCDL, regs->scdl);
+	if (sci_getreg(port, SCCKS)->size)
+		sci_serial_out(port, SCCKS, regs->sccks);
+	if (sci_getreg(port, SCSMR)->size)
+		sci_serial_out(port, SCSMR, regs->scsmr);
+	if (sci_getreg(port, SCSCR)->size)
+		sci_serial_out(port, SCSCR, regs->scscr);
+	if (sci_getreg(port, SCFCR)->size)
+		sci_serial_out(port, SCFCR, regs->scfcr);
+	if (sci_getreg(port, SCSPTR)->size)
+		sci_serial_out(port, SCSPTR, regs->scsptr);
+	if (sci_getreg(port, SCBRR)->size)
+		sci_serial_out(port, SCBRR, regs->scbrr);
+	if (sci_getreg(port, HSSRR)->size)
+		sci_serial_out(port, HSSRR, regs->hssrr);
+	if (sci_getreg(port, SCPCR)->size)
+		sci_serial_out(port, SCPCR, regs->scpcr);
+	if (sci_getreg(port, SCPDR)->size)
+		sci_serial_out(port, SCPDR, regs->scpdr);
+	if (sci_getreg(port, SEMR)->size)
+		sci_serial_out(port, SEMR, regs->semr);
+}
+
 static const struct uart_ops sci_uart_ops = {
 	.tx_empty	= sci_tx_empty,
 	.set_mctrl	= sci_set_mctrl,
@@ -2899,6 +2934,25 @@ static const struct uart_ops sci_uart_ops = {
 #endif
 };
 
+static const struct sci_port_ops sci_port_ops = {
+	.read_reg		= sci_serial_in,
+	.write_reg		= sci_serial_out,
+	.clear_SCxSR		= sci_clear_SCxSR,
+	.transmit_chars		= sci_transmit_chars,
+	.receive_chars		= sci_receive_chars,
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || \
+    defined(CONFIG_SERIAL_SH_SCI_EARLYCON)
+	.poll_put_char		= sci_poll_put_char,
+#endif
+	.set_rtrg		= scif_set_rtrg,
+	.rtrg_enabled		= scif_rtrg_enabled,
+	.shutdown_complete	= sci_shutdown_complete,
+	.prepare_console_write	= sci_prepare_console_write,
+	.console_save		= sci_console_save,
+	.console_restore	= sci_console_restore,
+	.suspend_regs_size	= sci_suspend_regs_size,
+};
+
 static int sci_init_clocks(struct sci_port *sci_port, struct device *dev)
 {
 	const char *clk_names[] = {
@@ -2992,6 +3046,7 @@ static int sci_init_single(struct platform_device *dev,
 	int ret;
 
 	sci_port->cfg	= p;
+	sci_port->ops	= &sci_port_ops;
 
 	port->ops	= &sci_uart_ops;
 	port->iotype	= UPIO_MEM;
@@ -3104,7 +3159,7 @@ static int sci_init_single(struct platform_device *dev,
     defined(CONFIG_SERIAL_SH_SCI_EARLYCON)
 static void serial_console_putchar(struct uart_port *port, unsigned char ch)
 {
-	sci_poll_put_char(port, ch);
+	to_sci_port(port)->ops->poll_put_char(port, ch);
 }
 
 /*
@@ -3116,7 +3171,9 @@ static void serial_console_write(struct console *co, const char *s,
 {
 	struct sci_port *sci_port = &sci_ports[co->index];
 	struct uart_port *port = &sci_port->port;
-	unsigned short bits, ctrl, ctrl_temp;
+	const struct sci_common_regs *regs = sci_port->params->common_regs;
+	unsigned int bits;
+	u32 ctrl;
 	unsigned long flags;
 	int locked = 1;
 
@@ -3128,21 +3185,21 @@ static void serial_console_write(struct console *co, const char *s,
 		uart_port_lock_irqsave(port, &flags);
 
 	/* first save SCSCR then disable interrupts, keep clock source */
-	ctrl = sci_serial_in(port, SCSCR);
-	ctrl_temp = SCSCR_RE | SCSCR_TE |
-		    (sci_port->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)) |
-		    (ctrl & (SCSCR_CKE1 | SCSCR_CKE0));
-	sci_serial_out(port, SCSCR, ctrl_temp | sci_port->hscif_tot);
+
+	ctrl = sci_port->ops->read_reg(port, regs->control);
+	sci_port->ops->prepare_console_write(port, ctrl);
 
 	uart_console_write(port, s, count, serial_console_putchar);
 
 	/* wait until fifo is empty and last bit has been transmitted */
-	bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
-	while ((sci_serial_in(port, SCxSR) & bits) != bits)
+
+	bits = sci_port->params->param_bits->poll_sent_bits;
+
+	while ((sci_port->ops->read_reg(port, regs->status) & bits) != bits)
 		cpu_relax();
 
 	/* restore the SCSCR */
-	sci_serial_out(port, SCSCR, ctrl);
+	sci_port->ops->write_reg(port, regs->control, ctrl);
 
 	if (locked)
 		uart_port_unlock_irqrestore(port, flags);
@@ -3275,7 +3332,6 @@ static void sci_remove(struct platform_device *dev)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_timeout);
 }
 
-
 #define SCI_OF_DATA(type, regtype)	(void *)((type) << 16 | (regtype))
 #define SCI_OF_TYPE(data)		((unsigned long)(data) >> 16)
 #define SCI_OF_REGTYPE(data)		((unsigned long)(data) & 0xffff)
@@ -3512,6 +3568,11 @@ static int sci_probe(struct platform_device *dev)
 	}
 
 	sp = &sci_ports[dev_id];
+	sp->suspend_regs = devm_kzalloc(&dev->dev,
+					sp->ops->suspend_regs_size(),
+					GFP_KERNEL);
+	if (!sp->suspend_regs)
+		return -ENOMEM;
 
 	/*
 	 * In case:
@@ -3563,64 +3624,6 @@ static int sci_probe(struct platform_device *dev)
 	return 0;
 }
 
-static void sci_console_save(struct sci_port *s)
-{
-	struct sci_suspend_regs *regs = &s->suspend_regs;
-	struct uart_port *port = &s->port;
-
-	if (sci_getreg(port, SCDL)->size)
-		regs->scdl = sci_serial_in(port, SCDL);
-	if (sci_getreg(port, SCCKS)->size)
-		regs->sccks = sci_serial_in(port, SCCKS);
-	if (sci_getreg(port, SCSMR)->size)
-		regs->scsmr = sci_serial_in(port, SCSMR);
-	if (sci_getreg(port, SCSCR)->size)
-		regs->scscr = sci_serial_in(port, SCSCR);
-	if (sci_getreg(port, SCFCR)->size)
-		regs->scfcr = sci_serial_in(port, SCFCR);
-	if (sci_getreg(port, SCSPTR)->size)
-		regs->scsptr = sci_serial_in(port, SCSPTR);
-	if (sci_getreg(port, SCBRR)->size)
-		regs->scbrr = sci_serial_in(port, SCBRR);
-	if (sci_getreg(port, HSSRR)->size)
-		regs->hssrr = sci_serial_in(port, HSSRR);
-	if (sci_getreg(port, SCPCR)->size)
-		regs->scpcr = sci_serial_in(port, SCPCR);
-	if (sci_getreg(port, SCPDR)->size)
-		regs->scpdr = sci_serial_in(port, SCPDR);
-	if (sci_getreg(port, SEMR)->size)
-		regs->semr = sci_serial_in(port, SEMR);
-}
-
-static void sci_console_restore(struct sci_port *s)
-{
-	struct sci_suspend_regs *regs = &s->suspend_regs;
-	struct uart_port *port = &s->port;
-
-	if (sci_getreg(port, SCDL)->size)
-		sci_serial_out(port, SCDL, regs->scdl);
-	if (sci_getreg(port, SCCKS)->size)
-		sci_serial_out(port, SCCKS, regs->sccks);
-	if (sci_getreg(port, SCSMR)->size)
-		sci_serial_out(port, SCSMR, regs->scsmr);
-	if (sci_getreg(port, SCSCR)->size)
-		sci_serial_out(port, SCSCR, regs->scscr);
-	if (sci_getreg(port, SCFCR)->size)
-		sci_serial_out(port, SCFCR, regs->scfcr);
-	if (sci_getreg(port, SCSPTR)->size)
-		sci_serial_out(port, SCSPTR, regs->scsptr);
-	if (sci_getreg(port, SCBRR)->size)
-		sci_serial_out(port, SCBRR, regs->scbrr);
-	if (sci_getreg(port, HSSRR)->size)
-		sci_serial_out(port, HSSRR, regs->hssrr);
-	if (sci_getreg(port, SCPCR)->size)
-		sci_serial_out(port, SCPCR, regs->scpcr);
-	if (sci_getreg(port, SCPDR)->size)
-		sci_serial_out(port, SCPDR, regs->scpdr);
-	if (sci_getreg(port, SEMR)->size)
-		sci_serial_out(port, SEMR, regs->semr);
-}
-
 static __maybe_unused int sci_suspend(struct device *dev)
 {
 	struct sci_port *sport = dev_get_drvdata(dev);
@@ -3628,8 +3631,10 @@ static __maybe_unused int sci_suspend(struct device *dev)
 	if (sport) {
 		uart_suspend_port(&sci_uart_driver, &sport->port);
 
-		if (!console_suspend_enabled && uart_console(&sport->port))
-			sci_console_save(sport);
+		if (!console_suspend_enabled && uart_console(&sport->port)) {
+			if (sport->ops->console_save)
+				sport->ops->console_save(&sport->port);
+		}
 		else
 			return reset_control_assert(sport->rstc);
 	}
@@ -3643,7 +3648,8 @@ static __maybe_unused int sci_resume(struct device *dev)
 
 	if (sport) {
 		if (!console_suspend_enabled && uart_console(&sport->port)) {
-			sci_console_restore(sport);
+			if (sport->ops->console_restore)
+				sport->ops->console_restore(&sport->port);
 		} else {
 			int ret = reset_control_deassert(sport->rstc);
 
@@ -3707,9 +3713,11 @@ static int early_console_exit(struct console *co)
 	return 0;
 }
 
-static int __init early_console_setup(struct earlycon_device *device,
+int __init scix_early_console_setup(struct earlycon_device *device,
 				      int type)
 {
+	const struct sci_common_regs *regs;
+
 	if (!device->port.membase)
 		return -ENODEV;
 
@@ -3717,11 +3725,15 @@ static int __init early_console_setup(struct earlycon_device *device,
 	sci_ports[0].port = device->port;
 	port_cfg.type = type;
 	sci_ports[0].cfg = &port_cfg;
+	sci_ports[0].ops = &sci_port_ops;
 	sci_ports[0].params = sci_probe_regmap(&port_cfg);
 	sci_uart_earlycon = true;
-	port_cfg.scscr = sci_serial_in(&sci_ports[0].port, SCSCR);
-	sci_serial_out(&sci_ports[0].port, SCSCR,
-		       SCSCR_RE | SCSCR_TE | port_cfg.scscr);
+	regs = sci_ports[0].params->common_regs;
+
+	port_cfg.scscr = sci_ports[0].ops->read_reg(&sci_ports[0].port, regs->control);
+	sci_ports[0].ops->write_reg(&sci_ports[0].port,
+				    regs->control,
+				    sci_ports[0].params->param_bits->rxtx_enable | port_cfg.scscr);
 
 	device->con->write = serial_console_write;
 	device->con->exit = early_console_exit;
@@ -3731,41 +3743,41 @@ static int __init early_console_setup(struct earlycon_device *device,
 static int __init sci_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
-	return early_console_setup(device, PORT_SCI);
+	return scix_early_console_setup(device, PORT_SCI);
 }
 static int __init scif_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
-	return early_console_setup(device, PORT_SCIF);
+	return scix_early_console_setup(device, PORT_SCIF);
 }
 static int __init rzscifa_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
 	port_cfg.regtype = SCIx_RZ_SCIFA_REGTYPE;
-	return early_console_setup(device, PORT_SCIF);
+	return scix_early_console_setup(device, PORT_SCIF);
 }
 
 static int __init rzv2hscif_early_console_setup(struct earlycon_device *device,
 						const char *opt)
 {
 	port_cfg.regtype = SCIx_RZV2H_SCIF_REGTYPE;
-	return early_console_setup(device, PORT_SCIF);
+	return scix_early_console_setup(device, PORT_SCIF);
 }
 
 static int __init scifa_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
-	return early_console_setup(device, PORT_SCIFA);
+	return scix_early_console_setup(device, PORT_SCIFA);
 }
 static int __init scifb_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
-	return early_console_setup(device, PORT_SCIFB);
+	return scix_early_console_setup(device, PORT_SCIFB);
 }
 static int __init hscif_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
-	return early_console_setup(device, PORT_HSCIF);
+	return scix_early_console_setup(device, PORT_HSCIF);
 }
 
 OF_EARLYCON_DECLARE(sci, "renesas,sci", sci_early_console_setup);
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 0b65563c4e9e..951681aba586 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -32,8 +32,6 @@ enum {
 	HSRTRGR,			/* Rx FIFO Data Count Trigger Register */
 	HSTTRGR,			/* Tx FIFO Data Count Trigger Register */
 	SEMR,				/* Serial extended mode register */
-
-	SCIx_NR_REGS,
 };
 
 
-- 
2.43.0

[PATCH v7 09/13] serial: sh-sci: Introduced sci_of_data

[Thierry Bultel]

The aim here is to provide an easier support to more different SCI
controllers, like the RZ/T2H one.

The existing .data field of_sci_match is changed to a structure containing
all what that can be statically initialized, and avoid a call to
'sci_probe_regmap', in both 'sci_init_single', and 'early_console_setup'.

'sci_probe_regmap' is now assumed to be called in the only case where the
device description is from a board file instead of a dts.

In this way, there is no need to patch 'sci_probe_regmap' for adding new
SCI type, and also, the specific sci_port_params for a new SCI type can be
provided by an external file.

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v6->v7: none
Changes v5->v6: none
Changes v4->v5: none
Changes v3->v4:
   - Fix the bot compilation error on superh in sci_probe_earlyprink()
---
 drivers/tty/serial/sh-sci-common.h |  10 +-
 drivers/tty/serial/sh-sci.c        | 164 +++++++++++++++++++++--------
 2 files changed, 131 insertions(+), 43 deletions(-)

diff --git a/drivers/tty/serial/sh-sci-common.h b/drivers/tty/serial/sh-sci-common.h
index 2ed742bca83f..bd9d9cfac1c8 100644
--- a/drivers/tty/serial/sh-sci-common.h
+++ b/drivers/tty/serial/sh-sci-common.h
@@ -89,6 +89,14 @@ struct sci_port_ops {
 	size_t (*suspend_regs_size)(void);
 };
 
+struct sci_of_data {
+	const struct sci_port_params *params;
+	const struct uart_ops *uart_ops;
+	const struct sci_port_ops *ops;
+	unsigned short regtype;
+	unsigned short type;
+};
+
 struct sci_port {
 	struct uart_port	port;
 
@@ -153,7 +161,7 @@ void sci_shutdown(struct uart_port *port);
 #define max_sr(_port)		fls((_port)->sampling_rate_mask)
 
 #ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
-int __init scix_early_console_setup(struct earlycon_device *device, int);
+int __init scix_early_console_setup(struct earlycon_device *device, const struct sci_of_data *data);
 #endif
 
 #endif /* __SH_SCI_COMMON_H__ */
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 54a484b04a97..0ddf178a72f5 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2996,10 +2996,13 @@ static int sci_init_clocks(struct sci_port *sci_port, struct device *dev)
 }
 
 static const struct sci_port_params *
-sci_probe_regmap(const struct plat_sci_port *cfg)
+sci_probe_regmap(const struct plat_sci_port *cfg, struct sci_port *sci_port)
 {
 	unsigned int regtype;
 
+	sci_port->ops = &sci_port_ops;
+	sci_port->port.ops = &sci_uart_ops;
+
 	if (cfg->regtype != SCIx_PROBE_REGTYPE)
 		return &sci_port_params[cfg->regtype];
 
@@ -3046,9 +3049,7 @@ static int sci_init_single(struct platform_device *dev,
 	int ret;
 
 	sci_port->cfg	= p;
-	sci_port->ops	= &sci_port_ops;
 
-	port->ops	= &sci_uart_ops;
 	port->iotype	= UPIO_MEM;
 	port->line	= index;
 	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SH_SCI_CONSOLE);
@@ -3088,10 +3089,6 @@ static int sci_init_single(struct platform_device *dev,
 		for (i = 1; i < ARRAY_SIZE(sci_port->irqs); i++)
 			sci_port->irqs[i] = sci_port->irqs[0];
 
-	sci_port->params = sci_probe_regmap(p);
-	if (unlikely(sci_port->params == NULL))
-		return -EINVAL;
-
 	switch (p->type) {
 	case PORT_SCIFB:
 		sci_port->rx_trigger = 48;
@@ -3277,13 +3274,18 @@ static struct console early_serial_console = {
 static int sci_probe_earlyprintk(struct platform_device *pdev)
 {
 	const struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev);
+	struct sci_port *sp = &sci_ports[pdev->id];
 
 	if (early_serial_console.data)
 		return -EEXIST;
 
 	early_serial_console.index = pdev->id;
 
-	sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
+	sp->params = sci_probe_regmap(cfg, sp);
+	if (!sp->params)
+		return -ENODEV;
+
+	sci_init_single(pdev, sp, pdev->id, cfg, true);
 
 	if (!strstr(early_serial_buf, "keep"))
 		early_serial_console.flags |= CON_BOOT;
@@ -3332,58 +3334,126 @@ static void sci_remove(struct platform_device *dev)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_timeout);
 }
 
-#define SCI_OF_DATA(type, regtype)	(void *)((type) << 16 | (regtype))
-#define SCI_OF_TYPE(data)		((unsigned long)(data) >> 16)
-#define SCI_OF_REGTYPE(data)		((unsigned long)(data) & 0xffff)
+static const struct sci_of_data of_sci_scif_sh2 = {
+	.type = PORT_SCIF,
+	.regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+	.ops = &sci_port_ops,
+	.uart_ops = &sci_uart_ops,
+	.params = &sci_port_params[SCIx_SH2_SCIF_FIFODATA_REGTYPE],
+};
+
+static const struct sci_of_data of_sci_scif_rz_scifa = {
+	.type = PORT_SCIF,
+	.regtype = SCIx_RZ_SCIFA_REGTYPE,
+	.ops = &sci_port_ops,
+	.uart_ops = &sci_uart_ops,
+	.params = &sci_port_params[SCIx_RZ_SCIFA_REGTYPE],
+};
+
+static const struct sci_of_data of_sci_scif_rzv2h = {
+	.type = PORT_SCIF,
+	.regtype = SCIx_RZV2H_SCIF_REGTYPE,
+	.ops = &sci_port_ops,
+	.uart_ops = &sci_uart_ops,
+	.params = &sci_port_params[SCIx_RZV2H_SCIF_REGTYPE],
+};
+
+static const struct sci_of_data of_sci_rcar_scif = {
+	.type = PORT_SCIF,
+	.regtype = SCIx_SH4_SCIF_BRG_REGTYPE,
+	.ops = &sci_port_ops,
+	.uart_ops = &sci_uart_ops,
+	.params = &sci_port_params[SCIx_SH4_SCIF_BRG_REGTYPE],
+};
+
+static const struct sci_of_data of_sci_scif_sh4 = {
+	.type = PORT_SCIF,
+	.regtype = SCIx_SH4_SCIF_REGTYPE,
+	.ops = &sci_port_ops,
+	.uart_ops = &sci_uart_ops,
+	.params = &sci_port_params[SCIx_SH4_SCIF_REGTYPE],
+};
+
+static const struct sci_of_data of_sci_scifa = {
+	.type = PORT_SCIFA,
+	.regtype = SCIx_SCIFA_REGTYPE,
+	.ops = &sci_port_ops,
+	.uart_ops = &sci_uart_ops,
+	.params = &sci_port_params[SCIx_SCIFA_REGTYPE],
+};
+
+static const struct sci_of_data of_sci_scifb = {
+	.type = PORT_SCIFB,
+	.regtype = SCIx_SCIFB_REGTYPE,
+	.ops = &sci_port_ops,
+	.uart_ops = &sci_uart_ops,
+	.params = &sci_port_params[SCIx_SCIFB_REGTYPE],
+};
+
+static const struct sci_of_data of_sci_hscif = {
+	.type = PORT_HSCIF,
+	.regtype = SCIx_HSCIF_REGTYPE,
+	.ops = &sci_port_ops,
+	.uart_ops = &sci_uart_ops,
+	.params = &sci_port_params[SCIx_HSCIF_REGTYPE],
+};
+
+static const struct sci_of_data of_sci_sci = {
+	.type = PORT_SCI,
+	.regtype = SCIx_SCI_REGTYPE,
+	.ops = &sci_port_ops,
+	.uart_ops = &sci_uart_ops,
+	.params = &sci_port_params[SCIx_SCI_REGTYPE],
+};
 
 static const struct of_device_id of_sci_match[] __maybe_unused = {
 	/* SoC-specific types */
 	{
 		.compatible = "renesas,scif-r7s72100",
-		.data = SCI_OF_DATA(PORT_SCIF, SCIx_SH2_SCIF_FIFODATA_REGTYPE),
+		.data = &of_sci_scif_sh2,
 	},
 	{
 		.compatible = "renesas,scif-r7s9210",
-		.data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE),
+		.data = &of_sci_scif_rz_scifa,
 	},
 	{
 		.compatible = "renesas,scif-r9a07g044",
-		.data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE),
+		.data = &of_sci_scif_rz_scifa,
 	},
 	{
 		.compatible = "renesas,scif-r9a09g057",
-		.data = SCI_OF_DATA(PORT_SCIF, SCIx_RZV2H_SCIF_REGTYPE),
+		.data = &of_sci_scif_rzv2h,
 	},
 	/* Family-specific types */
 	{
 		.compatible = "renesas,rcar-gen1-scif",
-		.data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE),
+		.data = &of_sci_rcar_scif,
 	}, {
 		.compatible = "renesas,rcar-gen2-scif",
-		.data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE),
+		.data = &of_sci_rcar_scif,
 	}, {
 		.compatible = "renesas,rcar-gen3-scif",
-		.data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE),
+		.data = &of_sci_rcar_scif
 	}, {
 		.compatible = "renesas,rcar-gen4-scif",
-		.data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_BRG_REGTYPE),
+		.data = &of_sci_rcar_scif
 	},
 	/* Generic types */
 	{
 		.compatible = "renesas,scif",
-		.data = SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_REGTYPE),
+		.data = &of_sci_scif_sh4,
 	}, {
 		.compatible = "renesas,scifa",
-		.data = SCI_OF_DATA(PORT_SCIFA, SCIx_SCIFA_REGTYPE),
+		.data = &of_sci_scifa,
 	}, {
 		.compatible = "renesas,scifb",
-		.data = SCI_OF_DATA(PORT_SCIFB, SCIx_SCIFB_REGTYPE),
+		.data = &of_sci_scifb,
 	}, {
 		.compatible = "renesas,hscif",
-		.data = SCI_OF_DATA(PORT_HSCIF, SCIx_HSCIF_REGTYPE),
+		.data = &of_sci_hscif,
 	}, {
 		.compatible = "renesas,sci",
-		.data = SCI_OF_DATA(PORT_SCI, SCIx_SCI_REGTYPE),
+		.data = &of_sci_sci,
 	}, {
 		/* Terminator */
 	},
@@ -3402,7 +3472,7 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
 	struct reset_control *rstc;
 	struct plat_sci_port *p;
 	struct sci_port *sp;
-	const void *data;
+	const struct sci_of_data *data;
 	int id, ret;
 
 	if (!IS_ENABLED(CONFIG_OF) || !np)
@@ -3449,8 +3519,12 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
 	sp->rstc = rstc;
 	*dev_id = id;
 
-	p->type = SCI_OF_TYPE(data);
-	p->regtype = SCI_OF_REGTYPE(data);
+	p->type = data->type;
+	p->regtype = data->regtype;
+
+	sp->ops = data->ops;
+	sp->port.ops = data->uart_ops;
+	sp->params = data->params;
 
 	sp->has_rtscts = of_property_read_bool(np, "uart-has-rtscts");
 
@@ -3557,6 +3631,7 @@ static int sci_probe(struct platform_device *dev)
 		p = sci_parse_dt(dev, &dev_id);
 		if (IS_ERR(p))
 			return PTR_ERR(p);
+		sp = &sci_ports[dev_id];
 	} else {
 		p = dev->dev.platform_data;
 		if (p == NULL) {
@@ -3565,9 +3640,12 @@ static int sci_probe(struct platform_device *dev)
 		}
 
 		dev_id = dev->id;
+		sp = &sci_ports[dev_id];
+		sp->params = sci_probe_regmap(p, sp);
+		if (!sp->params)
+			return -ENODEV;
 	}
 
-	sp = &sci_ports[dev_id];
 	sp->suspend_regs = devm_kzalloc(&dev->dev,
 					sp->ops->suspend_regs_size(),
 					GFP_KERNEL);
@@ -3714,19 +3792,23 @@ static int early_console_exit(struct console *co)
 }
 
 int __init scix_early_console_setup(struct earlycon_device *device,
-				      int type)
+				    const struct sci_of_data *data)
 {
 	const struct sci_common_regs *regs;
 
 	if (!device->port.membase)
 		return -ENODEV;
 
-	device->port.type = type;
+	device->port.type = data->type;
 	sci_ports[0].port = device->port;
-	port_cfg.type = type;
+
+	port_cfg.type = data->type;
+	port_cfg.regtype = data->regtype;
+
 	sci_ports[0].cfg = &port_cfg;
-	sci_ports[0].ops = &sci_port_ops;
-	sci_ports[0].params = sci_probe_regmap(&port_cfg);
+	sci_ports[0].params = data->params;
+	sci_ports[0].ops = data->ops;
+	sci_ports[0].port.ops = data->uart_ops;
 	sci_uart_earlycon = true;
 	regs = sci_ports[0].params->common_regs;
 
@@ -3743,41 +3825,39 @@ int __init scix_early_console_setup(struct earlycon_device *device,
 static int __init sci_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
-	return scix_early_console_setup(device, PORT_SCI);
+	return scix_early_console_setup(device, &of_sci_sci);
 }
 static int __init scif_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
-	return scix_early_console_setup(device, PORT_SCIF);
+	return scix_early_console_setup(device, &of_sci_scif_sh4);
 }
 static int __init rzscifa_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
-	port_cfg.regtype = SCIx_RZ_SCIFA_REGTYPE;
-	return scix_early_console_setup(device, PORT_SCIF);
+	return scix_early_console_setup(device, &of_sci_scif_rz_scifa);
 }
 
 static int __init rzv2hscif_early_console_setup(struct earlycon_device *device,
 						const char *opt)
 {
-	port_cfg.regtype = SCIx_RZV2H_SCIF_REGTYPE;
-	return scix_early_console_setup(device, PORT_SCIF);
+	return scix_early_console_setup(device, &of_sci_scif_rzv2h);
 }
 
 static int __init scifa_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
-	return scix_early_console_setup(device, PORT_SCIFA);
+	return scix_early_console_setup(device, &of_sci_scifa);
 }
 static int __init scifb_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
-	return scix_early_console_setup(device, PORT_SCIFB);
+	return scix_early_console_setup(device, &of_sci_scifb);
 }
 static int __init hscif_early_console_setup(struct earlycon_device *device,
 					  const char *opt)
 {
-	return scix_early_console_setup(device, PORT_HSCIF);
+	return scix_early_console_setup(device, &of_sci_hscif);
 }
 
 OF_EARLYCON_DECLARE(sci, "renesas,sci", sci_early_console_setup);
-- 
2.43.0

[PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI

[Thierry Bultel]

Define a new RSCI port type, and the RSCI 32 bits registers set.
The RZ/T2H SCI has a a fifo, and a quite different set of registers
from the orginal SH SCI ones.
DMA is not supported yet.

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
---
Changes v6->v7:
  - Renamed compatible string to r9a09g077-rsci
Changes v5->v6:
  - Rename SERIAL_RZ_SCI_T2 to CONFIG_SERIAL_RSCI
  - Rename rz-sci-t2.{c,h} to rsci.{c,h}
  - Rename port type to PORT_RSCI
  - Rename sci_r9a09g077_data to of_sci_r9a09g077_data for consistency
Changes v4->v5:
  - Rename SERIAL_RZ_SCI to SERIAL_RZ_SCI_T2
  - Rename rzsci.{c,h} to rz-sci-t2.{c,h}
  - Rename port type to PORT_RZ_SCI_T2
  - Set sci_shutdown ops pointer (needed by systemd for having a console)
Changes v3->v4:
  - Added missing #include <bitfield.h>
  - Fix christmas tree code style in rzsci_transmit_chars.
---
 drivers/tty/serial/Kconfig       |   7 +
 drivers/tty/serial/Makefile      |   1 +
 drivers/tty/serial/rsci.c        | 467 +++++++++++++++++++++++++++++++
 drivers/tty/serial/rsci.h        |  12 +
 drivers/tty/serial/sh-sci.c      |  21 +-
 include/linux/serial_sci.h       |   3 +-
 include/uapi/linux/serial_core.h |   3 +
 7 files changed, 508 insertions(+), 6 deletions(-)
 create mode 100644 drivers/tty/serial/rsci.c
 create mode 100644 drivers/tty/serial/rsci.h

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 79a8186d3361..44427415a80d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -675,6 +675,13 @@ config SERIAL_SH_SCI_DMA
 	depends on SERIAL_SH_SCI && DMA_ENGINE
 	default ARCH_RENESAS
 
+config SERIAL_RSCI
+	tristate "Support for Renesas RZ/T2H SCI variant"
+	depends on SERIAL_SH_SCI
+	help
+	  Support for the RZ/T2H SCI variant with fifo.
+	  Say Y if you want to be able to use the RZ/T2H SCI serial port.
+
 config SERIAL_HS_LPC32XX
 	tristate "LPC32XX high speed serial port support"
 	depends on ARCH_LPC32XX || COMPILE_TEST
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index d58d9f719889..a2ccbc508ec5 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_SERIAL_QCOM_GENI)		+= qcom_geni_serial.o
 obj-$(CONFIG_SERIAL_QE)			+= ucc_uart.o
 obj-$(CONFIG_SERIAL_RDA)		+= rda-uart.o
 obj-$(CONFIG_SERIAL_RP2)		+= rp2.o
+obj-$(CONFIG_SERIAL_RSCI)		+= rsci.o
 obj-$(CONFIG_SERIAL_SA1100)		+= sa1100.o
 obj-$(CONFIG_SERIAL_SAMSUNG)		+= samsung_tty.o
 obj-$(CONFIG_SERIAL_SB1250_DUART)	+= sb1250-duart.o
diff --git a/drivers/tty/serial/rsci.c b/drivers/tty/serial/rsci.c
new file mode 100644
index 000000000000..91fa1167adcb
--- /dev/null
+++ b/drivers/tty/serial/rsci.c
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/serial_core.h>
+#include <linux/serial_sci.h>
+#include <linux/tty_flip.h>
+#include "rsci.h"
+
+/* RSCI registers */
+#define RDR	0x00
+#define TDR	0x04
+#define CCR0	0x08
+#define CCR1	0x0C
+#define CCR2	0x10
+#define CCR3	0x14
+#define CCR4	0x18
+#define FCR	0x24
+#define DCR	0x30
+#define CSR	0x48
+#define FRSR	0x50
+#define FTSR	0x54
+#define CFCLR	0x68
+#define FFCLR	0x70
+
+/* RDR (Receive Data Register) */
+#define RDR_FFER		BIT(12) /* FIFO Framing Error */
+#define RDR_FPER		BIT(11) /* FIFO Parity Error */
+#define RDR_RDAT_MSK		GENMASK(8, 0)
+
+/* TDR (Transmit Data Register) */
+#define TDR_MPBT		BIT(9)	/* Multiprocessor Transfer */
+#define TDR_TDAT_9BIT_LSHIFT	0
+#define TDR_TDAT_9BIT_VAL	0x1FF
+#define TDR_TDAT_9BIT_MSK	(TDR_TDAT_9BIT_VAL << TDR_TDAT_9BIT_LSHIFT)
+
+/* CCR0 (Common Control Register 0) */
+#define CCR0_SSE		BIT(24)	/* SSn# Pin Function Enable */
+#define CCR0_TEIE		BIT(21)	/* Transmit End Interrupt Enable */
+#define CCR0_TIE		BIT(20)	/* Transmit Interrupt Enable */
+#define CCR0_RIE		BIT(16)	/* Receive Interrupt Enable */
+#define CCR0_IDSEL		BIT(10)	/* ID Frame Select */
+#define CCR0_DCME		BIT(9)	/* Data Compare Match Enable */
+#define CCR0_MPIE		BIT(8)	/* Multiprocessor Interrupt Enable */
+#define CCR0_TE			BIT(4)	/* Transmit Enable */
+#define CCR0_RE			BIT(0)	/* Receive Enable */
+
+/* CCR1 (Common Control Register 1) */
+#define CCR1_NFEN		BIT(28)	/* Digital Noise Filter Function */
+#define CCR1_SHARPS		BIT(20)	/* Half -duplex Communication Select */
+#define CCR1_SPLP		BIT(16)	/* Loopback Control */
+#define CCR1_RINV		BIT(13)	/* RxD invert */
+#define CCR1_TINV		BIT(12)	/* TxD invert */
+#define CCR1_PM			BIT(9)	/* Parity Mode */
+#define CCR1_PE			BIT(8)	/* Parity Enable */
+#define CCR1_SPB2IO		BIT(5)	/* Serial Port Break I/O */
+#define CCR1_SPB2DT		BIT(4)	/* Serial Port Break Data Select */
+#define CCR1_CTSPEN		BIT(1)	/* CTS External Pin Enable */
+#define CCR1_CTSE		BIT(0)	/* CTS Enable */
+
+/* FCR (FIFO Control Register) */
+#define FCR_RFRST		BIT(23)	/* Receive FIFO Data Register Reset */
+#define FCR_TFRST		BIT(15)	/* Transmit FIFO Data Register Reset */
+#define FCR_DRES		BIT(0)	/* Incoming Data Ready Error Select */
+#define FCR_RTRG4_0		GENMASK(20, 16)
+#define FCR_TTRG		GENMASK(12, 8)
+
+/* CSR (Common Status Register) */
+#define CSR_RDRF		BIT(31)	/* Receive Data Full */
+#define CSR_TEND		BIT(30)	/* Transmit End Flag */
+#define CSR_TDRE		BIT(29)	/* Transmit Data Empty */
+#define CSR_FER			BIT(28)	/* Framing Error */
+#define CSR_PER			BIT(27)	/* Parity Error */
+#define CSR_MFF			BIT(26)	/* Mode Fault Error */
+#define CSR_ORER		BIT(24)	/* Overrun Error */
+#define CSR_DFER		BIT(18)	/* Data Compare Match Framing Error */
+#define CSR_DPER		BIT(17)	/* Data Compare Match Parity Error */
+#define CSR_DCMF		BIT(16)	/* Data Compare Match */
+#define CSR_RXDMON		BIT(15)	/* Serial Input Data Monitor */
+#define CSR_ERS			BIT(4)	/* Error Signal Status */
+
+#define SCxSR_ERRORS(port)	(to_sci_port(port)->params->error_mask)
+#define SCxSR_ERROR_CLEAR(port)	(to_sci_port(port)->params->error_clear)
+
+#define RSCI_DEFAULT_ERROR_MASK	(CSR_PER | CSR_FER)
+
+#define RSCI_RDxF_CLEAR		(CFCLR_RDRFC)
+#define RSCI_ERROR_CLEAR	(CFCLR_PERC | CFCLR_FERC)
+#define RSCI_TDxE_CLEAR		(CFCLR_TDREC)
+#define RSCI_BREAK_CLEAR	(CFCLR_PERC | CFCLR_FERC | CFCLR_ORERC)
+
+/* FRSR (FIFO Receive Status Register) */
+#define FRSR_R5_0		GENMASK(13, 8)	/* Receive FIFO Data Count */
+#define FRSR_DR			BIT(0)	/* Receive Data Ready */
+
+/* CFCLR (Common Flag CLear Register) */
+#define CFCLR_RDRFC		BIT(31)	/* RDRF Clear */
+#define CFCLR_TDREC		BIT(29)	/* TDRE Clear */
+#define CFCLR_FERC		BIT(28)	/* FER Clear */
+#define CFCLR_PERC		BIT(27)	/* PER Clear */
+#define CFCLR_MFFC		BIT(26)	/* MFF Clear */
+#define CFCLR_ORERC		BIT(24)	/* ORER Clear */
+#define CFCLR_DFERC		BIT(18)	/* DFER Clear */
+#define CFCLR_DPERC		BIT(17)	/* DPER Clear */
+#define CFCLR_DCMFC		BIT(16)	/* DCMF Clear */
+#define CFCLR_ERSC		BIT(4)	/* ERS Clear */
+#define CFCLR_CLRFLAG		(CFCLR_RDRFC | CFCLR_FERC | CFCLR_PERC | \
+				 CFCLR_MFFC | CFCLR_ORERC | CFCLR_DFERC | \
+				 CFCLR_DPERC | CFCLR_DCMFC | CFCLR_ERSC)
+
+/* FFCLR (FIFO Flag CLear Register) */
+#define FFCLR_DRC		BIT(0)	/* DR Clear */
+
+#define DCR_DEPOL		BIT(0)
+
+static u32 rzsci_serial_in(struct uart_port *p, int offset)
+{
+	return readl(p->membase + offset);
+}
+
+static void rzsci_serial_out(struct uart_port *p, int offset, int value)
+{
+	writel(value, p->membase + offset);
+}
+
+static void rzsci_clear_DRxC(struct uart_port *port)
+{
+	rzsci_serial_out(port, CFCLR, CFCLR_RDRFC);
+	rzsci_serial_out(port, FFCLR, FFCLR_DRC);
+}
+
+static void rzsci_clear_SCxSR(struct uart_port *port, unsigned int mask)
+{
+	rzsci_serial_out(port, CFCLR, mask);
+}
+
+static void rzsci_start_rx(struct uart_port *port)
+{
+	unsigned int ctrl;
+
+	ctrl = rzsci_serial_in(port, CCR0);
+	ctrl |= CCR0_RIE;
+	rzsci_serial_out(port, CCR0, ctrl);
+}
+
+static void rzsci_set_termios(struct uart_port *port, struct ktermios *termios,
+			      const struct ktermios *old)
+{
+	struct sci_port *s = to_sci_port(port);
+	unsigned long flags;
+
+	sci_port_enable(s);
+	uart_port_lock_irqsave(port, &flags);
+
+	/* For now, only RX enabling is supported */
+	if (termios->c_cflag & CREAD)
+		rzsci_start_rx(port);
+
+	uart_port_unlock_irqrestore(port, flags);
+	sci_port_disable(s);
+}
+
+static int rzsci_txfill(struct uart_port *port)
+{
+	return rzsci_serial_in(port, FTSR);
+}
+
+static int rzsci_rxfill(struct uart_port *port)
+{
+	u32 val = rzsci_serial_in(port, FRSR);
+
+	return FIELD_GET(FRSR_R5_0, val);
+}
+
+static unsigned int rzsci_tx_empty(struct uart_port *port)
+{
+	unsigned int status = rzsci_serial_in(port, CSR);
+	unsigned int in_tx_fifo = rzsci_txfill(port);
+
+	return (status & CSR_TEND) && !in_tx_fifo ? TIOCSER_TEMT : 0;
+}
+
+static void rzsci_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* Not supported yet */
+}
+
+static unsigned int rzsci_get_mctrl(struct uart_port *port)
+{
+	/* Not supported yet */
+	return 0;
+}
+
+static void rzsci_clear_CFC(struct uart_port *port, unsigned int mask)
+{
+	rzsci_serial_out(port, CFCLR, mask);
+}
+
+static void rzsci_start_tx(struct uart_port *port)
+{
+	struct sci_port *sp = to_sci_port(port);
+	u32 ctrl;
+
+	if (sp->chan_tx)
+		return;
+
+	/*
+	 * TE (Transmit Enable) must be set after setting TIE
+	 * (Transmit Interrupt Enable) or in the same instruction
+	 * to start the transmit process.
+	 */
+	ctrl = rzsci_serial_in(port, CCR0);
+	ctrl |= CCR0_TIE | CCR0_TE;
+	rzsci_serial_out(port, CCR0, ctrl);
+}
+
+static void rzsci_stop_tx(struct uart_port *port)
+{
+	u32 ctrl;
+
+	ctrl = rzsci_serial_in(port, CCR0);
+	ctrl &= ~CCR0_TIE;
+	rzsci_serial_out(port, CCR0, ctrl);
+}
+
+static void rzsci_stop_rx(struct uart_port *port)
+{
+	u32 ctrl;
+
+	ctrl = rzsci_serial_in(port, CCR0);
+	ctrl &= ~CCR0_RIE;
+	rzsci_serial_out(port, CCR0, ctrl);
+}
+
+static int rzsci_txroom(struct uart_port *port)
+{
+	return port->fifosize - rzsci_txfill(port);
+}
+
+static void rzsci_transmit_chars(struct uart_port *port)
+{
+	unsigned int stopped = uart_tx_stopped(port);
+	struct tty_port *tport = &port->state->port;
+	u32 status, ctrl;
+	int count;
+
+	status = rzsci_serial_in(port, CSR);
+	if (!(status & CSR_TDRE)) {
+		ctrl = rzsci_serial_in(port, CCR0);
+		if (kfifo_is_empty(&tport->xmit_fifo))
+			ctrl &= ~CCR0_TIE;
+		else
+			ctrl |= CCR0_TIE;
+		rzsci_serial_out(port, CCR0, ctrl);
+		return;
+	}
+
+	count = rzsci_txroom(port);
+
+	do {
+		unsigned char c;
+
+		if (port->x_char) {
+			c = port->x_char;
+			port->x_char = 0;
+		} else if (stopped || !kfifo_get(&tport->xmit_fifo, &c)) {
+			break;
+		}
+
+		rzsci_clear_CFC(port, CFCLR_TDREC);
+		rzsci_serial_out(port, TDR, c);
+
+		port->icount.tx++;
+	} while (--count > 0);
+
+	if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (kfifo_is_empty(&tport->xmit_fifo)) {
+		ctrl = rzsci_serial_in(port, CCR0);
+		ctrl &= ~CCR0_TIE;
+		ctrl |= CCR0_TEIE;
+		rzsci_serial_out(port, CCR0, ctrl);
+	}
+}
+
+static void rzsci_receive_chars(struct uart_port *port)
+{
+	struct tty_port *tport = &port->state->port;
+	u32 rdat, status, frsr_status = 0;
+	int i, count, copied = 0;
+	unsigned char flag;
+
+	status = rzsci_serial_in(port, CSR);
+	frsr_status = rzsci_serial_in(port, FRSR);
+
+	if (!(status & CSR_RDRF) && !(frsr_status & FRSR_DR))
+		return;
+
+	while (1) {
+		/* Don't copy more bytes than there is room for in the buffer */
+		count = tty_buffer_request_room(tport, rzsci_rxfill(port));
+
+		/* If for any reason we can't copy more data, we're done! */
+		if (count == 0)
+			break;
+
+		for (i = 0; i < count; i++) {
+			char c;
+
+			rdat = rzsci_serial_in(port, RDR);
+			/* 9-bits data is not supported yet */
+			c = rdat & RDR_RDAT_MSK;
+
+			if (uart_handle_sysrq_char(port, c)) {
+				count--;
+				i--;
+				continue;
+			}
+
+			/* Store data and status.
+			 * Non FIFO mode is not supported
+			 */
+			if (rdat & RDR_FFER) {
+				flag = TTY_FRAME;
+				port->icount.frame++;
+			} else if (rdat & RDR_FPER) {
+				flag = TTY_PARITY;
+				port->icount.parity++;
+			} else {
+				flag = TTY_NORMAL;
+			}
+
+			tty_insert_flip_char(tport, c, flag);
+		}
+
+		rzsci_serial_in(port, CSR); /* dummy read */
+		rzsci_clear_DRxC(port);
+
+		copied += count;
+		port->icount.rx += count;
+	}
+
+	if (copied) {
+		/* Tell the rest of the system the news. New characters! */
+		tty_flip_buffer_push(tport);
+	} else {
+		/* TTY buffers full; read from RX reg to prevent lockup */
+		rzsci_serial_in(port, RDR);
+		rzsci_serial_in(port, CSR); /* dummy read */
+		rzsci_clear_DRxC(port);
+	}
+}
+
+static void rzsci_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	u32 status;
+	int ret;
+
+	ret = readl_relaxed_poll_timeout_atomic(port->membase + CSR, status,
+						(status & CSR_TDRE), 100,
+						USEC_PER_SEC);
+	if (ret != 0) {
+		dev_err(port->dev,
+			"Error while sending data in UART TX : %d\n", ret);
+		goto done;
+	}
+	rzsci_serial_out(port, TDR, c);
+done:
+	rzsci_clear_SCxSR(port, CFCLR_TDREC);
+}
+
+static void rzsci_prepare_console_write(struct uart_port *port, u32 ctrl)
+{
+	struct sci_port *s = to_sci_port(port);
+	u32 ctrl_temp =
+		s->params->param_bits->rxtx_enable |
+		CCR0_TIE |
+		s->hscif_tot;
+	rzsci_serial_out(port, CCR0, ctrl_temp);
+}
+
+static const char *rzsci_type(struct uart_port *port)
+{
+	return "rzsci";
+}
+
+static size_t rzsci_suspend_regs_size(void)
+{
+	return 0;
+}
+
+static const struct sci_common_regs rzsci_common_regs = {
+	.status = CSR,
+	.control = CCR0,
+};
+
+static const struct sci_port_params_bits rzsci_port_param_bits = {
+	.rxtx_enable = CCR0_RE | CCR0_TE,
+	.te_clear = CCR0_TE | CCR0_TEIE,
+	.poll_sent_bits = CSR_TDRE | CSR_TEND,
+};
+
+static const struct sci_port_params rzsci_port_params = {
+	.fifosize = 16,
+	.overrun_reg = CSR,
+	.overrun_mask = CSR_ORER,
+	.sampling_rate_mask = SCI_SR(32),
+	.error_mask = RSCI_DEFAULT_ERROR_MASK,
+	.error_clear = RSCI_ERROR_CLEAR,
+	.param_bits = &rzsci_port_param_bits,
+	.common_regs = &rzsci_common_regs,
+};
+
+static const struct uart_ops rzt2_sci_uart_ops = {
+	.tx_empty	= rzsci_tx_empty,
+	.set_mctrl	= rzsci_set_mctrl,
+	.get_mctrl	= rzsci_get_mctrl,
+	.start_tx	= rzsci_start_tx,
+	.stop_tx	= rzsci_stop_tx,
+	.stop_rx	= rzsci_stop_rx,
+	.startup	= sci_startup,
+	.shutdown	= sci_shutdown,
+	.set_termios	= rzsci_set_termios,
+	.pm		= sci_pm,
+	.type		= rzsci_type,
+	.release_port	= sci_release_port,
+	.request_port	= sci_request_port,
+	.config_port	= sci_config_port,
+	.verify_port	= sci_verify_port,
+};
+
+static const struct sci_port_ops rzsci_port_ops = {
+	.read_reg		= rzsci_serial_in,
+	.write_reg		= rzsci_serial_out,
+	.clear_SCxSR		= rzsci_clear_SCxSR,
+	.transmit_chars		= rzsci_transmit_chars,
+	.receive_chars		= rzsci_receive_chars,
+	.poll_put_char		= rzsci_poll_put_char,
+	.prepare_console_write	= rzsci_prepare_console_write,
+	.suspend_regs_size	= rzsci_suspend_regs_size,
+};
+
+struct sci_of_data of_sci_r9a09g077_data = {
+	.type = PORT_RSCI,
+	.regtype = SCIx_RZT2H_SCI_REGTYPE,
+	.ops = &rzsci_port_ops,
+	.uart_ops = &rzt2_sci_uart_ops,
+	.params = &rzsci_port_params,
+};
+
+#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
+
+static int __init rzt2hsci_early_console_setup(struct earlycon_device *device,
+					       const char *opt)
+{
+	return scix_early_console_setup(device, &of_sci_r9a09g077_data);
+}
+
+OF_EARLYCON_DECLARE(rzsci, "renesas,r9a09g077-rsci", rzt2hsci_early_console_setup);
+
+#endif /* CONFIG_SERIAL_SH_SCI_EARLYCON */
diff --git a/drivers/tty/serial/rsci.h b/drivers/tty/serial/rsci.h
new file mode 100644
index 000000000000..0a037af26267
--- /dev/null
+++ b/drivers/tty/serial/rsci.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __RSCI_H__
+#define __RSCI_H__
+
+#include "sh-sci-common.h"
+
+#ifdef CONFIG_SERIAL_RSCI
+extern struct sci_of_data of_sci_r9a09g077_data;
+#endif
+
+#endif /* __RSCI_H__ */
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 0ddf178a72f5..1a82c316c6eb 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -54,6 +54,7 @@
 #include <asm/platform_early.h>
 #endif
 
+#include "rsci.h"
 #include "serial_mctrl_gpio.h"
 #include "sh-sci.h"
 #include "sh-sci-common.h"
@@ -1820,7 +1821,7 @@ static irqreturn_t sci_tx_end_interrupt(int irq, void *ptr)
 	unsigned long flags;
 	u32 ctrl;
 
-	if (port->type != PORT_SCI)
+	if (port->type != PORT_SCI && port->type != PORT_RSCI)
 		return sci_tx_interrupt(irq, ptr);
 
 	uart_port_lock_irqsave(port, &flags);
@@ -3069,10 +3070,10 @@ static int sci_init_single(struct platform_device *dev,
 	}
 
 	/*
-	 * The fourth interrupt on SCI port is transmit end interrupt, so
+	 * The fourth interrupt on SCI and RZSCI port is transmit end interrupt, so
 	 * shuffle the interrupts.
 	 */
-	if (p->type == PORT_SCI)
+	if (p->type == PORT_SCI || p->type == PORT_RSCI)
 		swap(sci_port->irqs[SCIx_BRI_IRQ], sci_port->irqs[SCIx_TEI_IRQ]);
 
 	/* The SCI generates several interrupts. They can be muxed together or
@@ -3106,6 +3107,9 @@ static int sci_init_single(struct platform_device *dev,
 		else
 			sci_port->rx_trigger = 8;
 		break;
+	case PORT_RSCI:
+		sci_port->rx_trigger = 15;
+		break;
 	default:
 		sci_port->rx_trigger = 1;
 		break;
@@ -3330,7 +3334,8 @@ static void sci_remove(struct platform_device *dev)
 
 	if (port->port.fifosize > 1)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_trigger);
-	if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF)
+	if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF ||
+	    type == PORT_RSCI)
 		device_remove_file(&dev->dev, &dev_attr_rx_fifo_timeout);
 }
 
@@ -3424,6 +3429,12 @@ static const struct of_device_id of_sci_match[] __maybe_unused = {
 		.compatible = "renesas,scif-r9a09g057",
 		.data = &of_sci_scif_rzv2h,
 	},
+#ifdef CONFIG_SERIAL_RSCI
+	{
+		.compatible = "renesas,r9a09g077-rsci",
+		.data = &of_sci_r9a09g077_data,
+	},
+#endif	/* CONFIG_SERIAL_RSCI */
 	/* Family-specific types */
 	{
 		.compatible = "renesas,rcar-gen1-scif",
@@ -3683,7 +3694,7 @@ static int sci_probe(struct platform_device *dev)
 			return ret;
 	}
 	if (sp->port.type == PORT_SCIFA || sp->port.type == PORT_SCIFB ||
-	    sp->port.type == PORT_HSCIF) {
+	    sp->port.type == PORT_HSCIF || sp->port.type == PORT_RSCI) {
 		ret = device_create_file(&dev->dev, &dev_attr_rx_fifo_timeout);
 		if (ret) {
 			if (sp->port.fifosize > 1) {
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 0f2f50b8d28e..787fd9a96711 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -38,6 +38,7 @@ enum {
 	SCIx_HSCIF_REGTYPE,
 	SCIx_RZ_SCIFA_REGTYPE,
 	SCIx_RZV2H_SCIF_REGTYPE,
+	SCIx_RZT2H_SCI_REGTYPE,
 
 	SCIx_NR_REGTYPES,
 };
@@ -50,7 +51,7 @@ struct plat_sci_port_ops {
  * Platform device specific platform_data struct
  */
 struct plat_sci_port {
-	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF */
+	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF / RZSCI */
 	upf_t		flags;			/* UPF_* flags */
 
 	unsigned int	sampling_rate;
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 9c007a106330..c15011e96d16 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -231,6 +231,9 @@
 /* Sunplus UART */
 #define PORT_SUNPLUS	123
 
+/* SH-SCI */
+#define PORT_RSCI	124
+
 /* Generic type identifier for ports which type is not important to userspace. */
 #define PORT_GENERIC	(-1)
 
-- 
2.43.0

Re: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI

[Greg KH]

On Thu, Apr 03, 2025 at 11:29:12PM +0200, Thierry Bultel wrote:
> --- a/include/uapi/linux/serial_core.h
> +++ b/include/uapi/linux/serial_core.h
> @@ -231,6 +231,9 @@
>  /* Sunplus UART */
>  #define PORT_SUNPLUS	123
>  
> +/* SH-SCI */
> +#define PORT_RSCI	124

Why do you need to tell userspace about this specific port?  Is that a
hard requirement that your userspace tools require?  If not, please
don't export this here.

thanks,

greg k-h

RE: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI

[Thierry Bultel]

Hi Greg,

> -----Original Message-----
> From: Greg KH <gregkh@linuxfoundation.org>
> Sent: vendredi 11 avril 2025 16:57
> To: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
> Cc: thierry.bultel@linatsea.fr; linux-renesas-soc@vger.kernel.org;
> geert@linux-m68k.org; Paul Barker <paul.barker.ct@bp.renesas.com>; Wolfram
> Sang <wsa+renesas@sang-engineering.com>; linux-kernel@vger.kernel.org;
> linux-serial@vger.kernel.org
> Subject: Re: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI
> 
> On Thu, Apr 03, 2025 at 11:29:12PM +0200, Thierry Bultel wrote:
> > --- a/include/uapi/linux/serial_core.h
> > +++ b/include/uapi/linux/serial_core.h
> > @@ -231,6 +231,9 @@
> >  /* Sunplus UART */
> >  #define PORT_SUNPLUS	123
> >
> > +/* SH-SCI */
> > +#define PORT_RSCI	124
> 
> Why do you need to tell userspace about this specific port?  Is that a
> hard requirement that your userspace tools require?  If not, please don't
> export this here.

This point has been discussed with Geert and Wolfram.
We cannot use PORT_GENERIC for this IP, and adding the new type
is just keeping consistent with the sh-sci driver.

Thanks
Thierry

> 
> thanks,
> 
> greg k-h

Re: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI

[Greg KH]

On Mon, Apr 14, 2025 at 07:54:12AM +0000, Thierry Bultel wrote:
> Hi Greg,
> 
> > -----Original Message-----
> > From: Greg KH <gregkh@linuxfoundation.org>
> > Sent: vendredi 11 avril 2025 16:57
> > To: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
> > Cc: thierry.bultel@linatsea.fr; linux-renesas-soc@vger.kernel.org;
> > geert@linux-m68k.org; Paul Barker <paul.barker.ct@bp.renesas.com>; Wolfram
> > Sang <wsa+renesas@sang-engineering.com>; linux-kernel@vger.kernel.org;
> > linux-serial@vger.kernel.org
> > Subject: Re: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI
> > 
> > On Thu, Apr 03, 2025 at 11:29:12PM +0200, Thierry Bultel wrote:
> > > --- a/include/uapi/linux/serial_core.h
> > > +++ b/include/uapi/linux/serial_core.h
> > > @@ -231,6 +231,9 @@
> > >  /* Sunplus UART */
> > >  #define PORT_SUNPLUS	123
> > >
> > > +/* SH-SCI */
> > > +#define PORT_RSCI	124
> > 
> > Why do you need to tell userspace about this specific port?  Is that a
> > hard requirement that your userspace tools require?  If not, please don't
> > export this here.
> 
> This point has been discussed with Geert and Wolfram.
> We cannot use PORT_GENERIC for this IP, and adding the new type
> is just keeping consistent with the sh-sci driver.

But, why does userspace need to know this number?  And why doesn't
PORT_GENERIC work?

thanks,

greg k-h

Re: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI

[Thierry Bultel]

Le 14/04/2025 à 10:58, Greg KH a écrit :
> On Mon, Apr 14, 2025 at 07:54:12AM +0000, Thierry Bultel wrote:
>> Hi Greg,
>>
>>> -----Original Message-----
>>> From: Greg KH <gregkh@linuxfoundation.org>
>>> Sent: vendredi 11 avril 2025 16:57
>>> To: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
>>> Cc: thierry.bultel@linatsea.fr; linux-renesas-soc@vger.kernel.org;
>>> geert@linux-m68k.org; Paul Barker <paul.barker.ct@bp.renesas.com>; Wolfram
>>> Sang <wsa+renesas@sang-engineering.com>; linux-kernel@vger.kernel.org;
>>> linux-serial@vger.kernel.org
>>> Subject: Re: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI
>>>
>>> On Thu, Apr 03, 2025 at 11:29:12PM +0200, Thierry Bultel wrote:
>>>> --- a/include/uapi/linux/serial_core.h
>>>> +++ b/include/uapi/linux/serial_core.h
>>>> @@ -231,6 +231,9 @@
>>>>   /* Sunplus UART */
>>>>   #define PORT_SUNPLUS	123
>>>>
>>>> +/* SH-SCI */
>>>> +#define PORT_RSCI	124
>>> Why do you need to tell userspace about this specific port?  Is that a
>>> hard requirement that your userspace tools require?  If not, please don't
>>> export this here.
>> This point has been discussed with Geert and Wolfram.
>> We cannot use PORT_GENERIC for this IP, and adding the new type
>> is just keeping consistent with the sh-sci driver.
> But, why does userspace need to know this number?  And why doesn't
> PORT_GENERIC work?

The reason is that the sh-sci driver discriminates internally between 
port types.
There are number of locations when it checks for PORT_SCI, PORT_SCIF, 
PORT_SCIFA...
T2H SCI needs special handling, too, that is the reason why PORT_GENERIC 
cannot work. I just therefore added this new type.

>
> thanks,
>
> greg k-h

Re: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI

[Greg KH]

On Mon, Apr 14, 2025 at 11:23:34AM +0200, Thierry Bultel wrote:
> 
> 
> Le 14/04/2025 à 10:58, Greg KH a écrit :
> > On Mon, Apr 14, 2025 at 07:54:12AM +0000, Thierry Bultel wrote:
> > > Hi Greg,
> > > 
> > > > -----Original Message-----
> > > > From: Greg KH <gregkh@linuxfoundation.org>
> > > > Sent: vendredi 11 avril 2025 16:57
> > > > To: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
> > > > Cc: thierry.bultel@linatsea.fr; linux-renesas-soc@vger.kernel.org;
> > > > geert@linux-m68k.org; Paul Barker <paul.barker.ct@bp.renesas.com>; Wolfram
> > > > Sang <wsa+renesas@sang-engineering.com>; linux-kernel@vger.kernel.org;
> > > > linux-serial@vger.kernel.org
> > > > Subject: Re: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI
> > > > 
> > > > On Thu, Apr 03, 2025 at 11:29:12PM +0200, Thierry Bultel wrote:
> > > > > --- a/include/uapi/linux/serial_core.h
> > > > > +++ b/include/uapi/linux/serial_core.h
> > > > > @@ -231,6 +231,9 @@
> > > > >   /* Sunplus UART */
> > > > >   #define PORT_SUNPLUS	123
> > > > > 
> > > > > +/* SH-SCI */
> > > > > +#define PORT_RSCI	124
> > > > Why do you need to tell userspace about this specific port?  Is that a
> > > > hard requirement that your userspace tools require?  If not, please don't
> > > > export this here.
> > > This point has been discussed with Geert and Wolfram.
> > > We cannot use PORT_GENERIC for this IP, and adding the new type
> > > is just keeping consistent with the sh-sci driver.
> > But, why does userspace need to know this number?  And why doesn't
> > PORT_GENERIC work?
> 
> The reason is that the sh-sci driver discriminates internally between port
> types.
> There are number of locations when it checks for PORT_SCI, PORT_SCIF,
> PORT_SCIFA...

That is internal to the kernel, not external, right?

> T2H SCI needs special handling, too, that is the reason why PORT_GENERIC
> cannot work. I just therefore added this new type.

Again, why does userspace need to know this?

thanks,

greg k-h

Re: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI

[Geert Uytterhoeven]

Hi Greg,

On Mon, 14 Apr 2025 at 11:32, Greg KH <gregkh@linuxfoundation.org> wrote:
> On Mon, Apr 14, 2025 at 11:23:34AM +0200, Thierry Bultel wrote:
> > Le 14/04/2025 à 10:58, Greg KH a écrit :
> > > On Mon, Apr 14, 2025 at 07:54:12AM +0000, Thierry Bultel wrote:
> > > > > From: Greg KH <gregkh@linuxfoundation.org>
 > > > > On Thu, Apr 03, 2025 at 11:29:12PM +0200, Thierry Bultel wrote:
> > > > > > --- a/include/uapi/linux/serial_core.h
> > > > > > +++ b/include/uapi/linux/serial_core.h
> > > > > > @@ -231,6 +231,9 @@
> > > > > >   /* Sunplus UART */
> > > > > >   #define PORT_SUNPLUS        123
> > > > > >
> > > > > > +/* SH-SCI */
> > > > > > +#define PORT_RSCI    124
> > > > > Why do you need to tell userspace about this specific port?  Is that a
> > > > > hard requirement that your userspace tools require?  If not, please don't
> > > > > export this here.
> > > > This point has been discussed with Geert and Wolfram.
> > > > We cannot use PORT_GENERIC for this IP, and adding the new type
> > > > is just keeping consistent with the sh-sci driver.
> > > But, why does userspace need to know this number?  And why doesn't
> > > PORT_GENERIC work?
> >
> > The reason is that the sh-sci driver discriminates internally between port
> > types.
> > There are number of locations when it checks for PORT_SCI, PORT_SCIF,
> > PORT_SCIFA...
>
> That is internal to the kernel, not external, right?

Indeed.

> > T2H SCI needs special handling, too, that is the reason why PORT_GENERIC
> > cannot work. I just therefore added this new type.
>
> Again, why does userspace need to know this?

I guess userspace does not need to know about this (does userspace
actually care about any of these values, except for PORT_8250 and
friends?).

However, traditionally PORT_* has been used as the differentiator
for serial port types in most drivers in the kernel (incl. sh-sci.c)
as well.  Just two drivers use PORT_GENERIC, and these are the ones
that came with the introduction of PORT_GENERIC.  Since the rsci driver
is not a new driver, but a sub-driver of the existing sh-sci driver,
I think it warrants keeping on using the type field, like before. Else
it will have to become even more complex than it already is.

Note I am fine with using a non-uapi value. Is there a PORT_* number
range meant for internal (non-uapi) use?
Thanks!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI

[Greg KH]

On Mon, Apr 14, 2025 at 04:07:23PM +0200, Geert Uytterhoeven wrote:
> Hi Greg,
> 
> On Mon, 14 Apr 2025 at 11:32, Greg KH <gregkh@linuxfoundation.org> wrote:
> > On Mon, Apr 14, 2025 at 11:23:34AM +0200, Thierry Bultel wrote:
> > > Le 14/04/2025 à 10:58, Greg KH a écrit :
> > > > On Mon, Apr 14, 2025 at 07:54:12AM +0000, Thierry Bultel wrote:
> > > > > > From: Greg KH <gregkh@linuxfoundation.org>
>  > > > > On Thu, Apr 03, 2025 at 11:29:12PM +0200, Thierry Bultel wrote:
> > > > > > > --- a/include/uapi/linux/serial_core.h
> > > > > > > +++ b/include/uapi/linux/serial_core.h
> > > > > > > @@ -231,6 +231,9 @@
> > > > > > >   /* Sunplus UART */
> > > > > > >   #define PORT_SUNPLUS        123
> > > > > > >
> > > > > > > +/* SH-SCI */
> > > > > > > +#define PORT_RSCI    124
> > > > > > Why do you need to tell userspace about this specific port?  Is that a
> > > > > > hard requirement that your userspace tools require?  If not, please don't
> > > > > > export this here.
> > > > > This point has been discussed with Geert and Wolfram.
> > > > > We cannot use PORT_GENERIC for this IP, and adding the new type
> > > > > is just keeping consistent with the sh-sci driver.
> > > > But, why does userspace need to know this number?  And why doesn't
> > > > PORT_GENERIC work?
> > >
> > > The reason is that the sh-sci driver discriminates internally between port
> > > types.
> > > There are number of locations when it checks for PORT_SCI, PORT_SCIF,
> > > PORT_SCIFA...
> >
> > That is internal to the kernel, not external, right?
> 
> Indeed.
> 
> > > T2H SCI needs special handling, too, that is the reason why PORT_GENERIC
> > > cannot work. I just therefore added this new type.
> >
> > Again, why does userspace need to know this?
> 
> I guess userspace does not need to know about this (does userspace
> actually care about any of these values, except for PORT_8250 and
> friends?).
> 
> However, traditionally PORT_* has been used as the differentiator
> for serial port types in most drivers in the kernel (incl. sh-sci.c)
> as well.  Just two drivers use PORT_GENERIC, and these are the ones
> that came with the introduction of PORT_GENERIC.  Since the rsci driver
> is not a new driver, but a sub-driver of the existing sh-sci driver,
> I think it warrants keeping on using the type field, like before. Else
> it will have to become even more complex than it already is.
> 
> Note I am fine with using a non-uapi value. Is there a PORT_* number
> range meant for internal (non-uapi) use?

We can just start putting them in a non-uapi file so that we don't have
to keep adding things to userspace that never needs it.

thanks,

greg k-h

Re: [PATCH v7 10/13] serial: sh-sci: Add support for RZ/T2H SCI

[Geert Uytterhoeven]

Hi Thierry,

On Thu, 3 Apr 2025 at 23:30, Thierry Bultel
<thierry.bultel.yh@bp.renesas.com> wrote:
> Define a new RSCI port type, and the RSCI 32 bits registers set.
> The RZ/T2H SCI has a a fifo, and a quite different set of registers
> from the orginal SH SCI ones.
> DMA is not supported yet.
>
> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
> ---
> Changes v6->v7:
>   - Renamed compatible string to r9a09g077-rsci

Thanks for the update!

Just some cosmetic comments...

> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -675,6 +675,13 @@ config SERIAL_SH_SCI_DMA
>         depends on SERIAL_SH_SCI && DMA_ENGINE
>         default ARCH_RENESAS
>
> +config SERIAL_RSCI
> +       tristate "Support for Renesas RZ/T2H SCI variant"
> +       depends on SERIAL_SH_SCI
> +       help
> +         Support for the RZ/T2H SCI variant with fifo.

FIFO

> +         Say Y if you want to be able to use the RZ/T2H SCI serial port.
> +
>  config SERIAL_HS_LPC32XX
>         tristate "LPC32XX high speed serial port support"
>         depends on ARCH_LPC32XX || COMPILE_TEST

> --- /dev/null
> +++ b/drivers/tty/serial/rsci.c

> +static u32 rzsci_serial_in(struct uart_port *p, int offset)

rsci_* (everywhere)

> +{
> +       return readl(p->membase + offset);
> +}

> +static void rzsci_prepare_console_write(struct uart_port *port, u32 ctrl)
> +{
> +       struct sci_port *s = to_sci_port(port);
> +       u32 ctrl_temp =
> +               s->params->param_bits->rxtx_enable |
> +               CCR0_TIE |
> +               s->hscif_tot;

        u32 ctrl_temp = s->params->param_bits->rxtx_enable | CCR0_TIE |
                        s->hscif_tot;

> +       rzsci_serial_out(port, CCR0, ctrl_temp);
> +}

> +static const struct uart_ops rzt2_sci_uart_ops = {

rsci_uart_ops

> +       .tx_empty       = rzsci_tx_empty,
> +       .set_mctrl      = rzsci_set_mctrl,
> +       .get_mctrl      = rzsci_get_mctrl,
> +       .start_tx       = rzsci_start_tx,
> +       .stop_tx        = rzsci_stop_tx,
> +       .stop_rx        = rzsci_stop_rx,
> +       .startup        = sci_startup,
> +       .shutdown       = sci_shutdown,
> +       .set_termios    = rzsci_set_termios,
> +       .pm             = sci_pm,
> +       .type           = rzsci_type,
> +       .release_port   = sci_release_port,
> +       .request_port   = sci_request_port,
> +       .config_port    = sci_config_port,
> +       .verify_port    = sci_verify_port,
> +};
> +
> +static const struct sci_port_ops rzsci_port_ops = {

rsci_port_ops

> +       .read_reg               = rzsci_serial_in,
> +       .write_reg              = rzsci_serial_out,
> +       .clear_SCxSR            = rzsci_clear_SCxSR,
> +       .transmit_chars         = rzsci_transmit_chars,
> +       .receive_chars          = rzsci_receive_chars,
> +       .poll_put_char          = rzsci_poll_put_char,
> +       .prepare_console_write  = rzsci_prepare_console_write,
> +       .suspend_regs_size      = rzsci_suspend_regs_size,
> +};
> +
> +struct sci_of_data of_sci_r9a09g077_data = {

of_sci_rsci_data

> +       .type = PORT_RSCI,
> +       .regtype = SCIx_RZT2H_SCI_REGTYPE,
> +       .ops = &rzsci_port_ops,
> +       .uart_ops = &rzt2_sci_uart_ops,
> +       .params = &rzsci_port_params,
> +};
> +
> +#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
> +
> +static int __init rzt2hsci_early_console_setup(struct earlycon_device *device,
> +                                              const char *opt)

rsci_early_console_setup

> +{
> +       return scix_early_console_setup(device, &of_sci_r9a09g077_data);
> +}
> +
> +OF_EARLYCON_DECLARE(rzsci, "renesas,r9a09g077-rsci", rzt2hsci_early_console_setup);
> +
> +#endif /* CONFIG_SERIAL_SH_SCI_EARLYCON */

> --- a/drivers/tty/serial/sh-sci.c
> +++ b/drivers/tty/serial/sh-sci.c
> --- a/include/linux/serial_sci.h
> +++ b/include/linux/serial_sci.h
> @@ -38,6 +38,7 @@ enum {
>         SCIx_HSCIF_REGTYPE,
>         SCIx_RZ_SCIFA_REGTYPE,
>         SCIx_RZV2H_SCIF_REGTYPE,
> +       SCIx_RZT2H_SCI_REGTYPE,

SCIx_RSCI_REGTYPE?

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds