Re: [PATCH 2/3] dt-bindings: serial: 8250_omap: Add wakeup pinctrl state

[Rob Herring <robh@kernel.org>]

On Thu, Sep 04, 2025 at 04:24:54PM -0500, Kendall Willis wrote:
> From: Markus Schneider-Pargmann <msp@baylibre.com>
> 
> Pins associated with the 8250 omap unit can be the source of a wakeup in
> deep sleep states. To be able to wakeup, these pins have to be
> configured in a special way. To support this configuration add the
> default and wakeup pinctrl states. Add support for the sleep state as
> well which is in use by some devicetrees.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> Signed-off-by: Kendall Willis <k-willis@ti.com>
> ---
>  .../devicetree/bindings/serial/8250_omap.yaml   | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
> index 851a5291b4be4..1c4040a9f9d0b 100644
> --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
> +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
> @@ -77,6 +77,23 @@ properties:
>          description:
>            List of phandles to system idle states in which UARTs can wakeup the system.
>  
> +  pinctrl-0:
> +    description: Default pinctrl state
> +
> +  pinctrl-1:
> +    description: Can be "sleep" or "wakeup" pinctrl state
> +
> +  pinctrl-names:
> +    description:
> +      When present should contain at least "default" describing the default pin
> +      states. Other states are "sleep" which describes the pinstate when
> +      sleeping and "wakeup" describing the pins if wakeup is enabled.
> +    minItems: 1
> +    items:
> +      - const: default
> +      - const: sleep
> +      - const: wakeup

This doesn't match what 'pinctrl-1' says. Perhaps you want?:

items:
  - const: default
  - enum: [ sleep, wakeup ]

> +
>  required:
>    - compatible
>    - reg
> -- 
> 2.34.1
>