Re: [PATCH v3 00/13] riscv: Add initial support for Anlogic DR1V90

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 2536 bytes --]

Thomas, Junhui,

On Tue, Oct 21, 2025 at 05:41:35PM +0800, Junhui Liu wrote:
> This introduces initial support for the Anlogic DR1V90 SoC [1] and the
> Milianke MLKPAI-FS01 [2] board.
> 
> The DR1V90 is a RISC-V based FPSoC from Anlogic, featuring a Nuclei
> UX900 [3] core as its processing system (PS) and 94,464 LUTs in the
> programmable logic (PL) part. The Milianke MLKPAI-FS01 board is one of
> the first platforms based on this SoC, with UART1 routed to a Type-C
> interface for console access.
> 
> Tested on the Milianke MLKPAI-FS01 board with both the vendor's OpenSBI
> and the not-yet-upstreamed mainline OpenSBI [4], as well as the vendor’s
> U-Boot. Because the vendor’s OpenSBI is loaded at 0x1f300000, we have
> to additionally reserve the DRAM region 0x1fe00000–0x1fffffff to prevent
> overlap if using vendor's OpenSBI.
> 
> Link: https://www.anlogic.com/product/fpga/saldragon/dr1 [1]
> Link: https://www.milianke.com/product-item-104.html [2]
> Link: https://nucleisys.com/product/900.php [3]
> Link: https://github.com/pigmoral/opensbi/tree/dr1v90 [4]
> ---
> Changes in v3:
> - Update DT binding to use ACLINT instead of CLINT
> - Drop MAINTAINERS patch
> - Rebase on v6.18-rc1
> - Link to v2: https://lore.kernel.org/r/20250922-dr1v90-basic-dt-v2-0-64d28500cb37@pigmoral.tech
> 
> Changes in v2:
> - Add MAINTAINERS entry for the DR1V90 platform
> - Remove the riscv,isa property of cpu and reorder propertyies
> - Fix clint base address in the dtsi
> - Change the memory node to cover the full 512MB RAM in board dts
> - Link to v1: https://lore.kernel.org/r/20250721-dr1v90-basic-dt-v1-0-5740c5199c47@pigmoral.tech
> 
> ---
> Junhui Liu (13):
>       dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
>       dt-bindings: riscv: Add Nuclei UX900 compatibles
>       dt-bindings: riscv: Add Anlogic DR1V90
>       dt-bindings: interrupt-controller: Add Anlogic DR1V90 PLIC
>       dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT MSWI
>       dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT SSWI
>       dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
>       dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
>       irqchip/aclint-sswi: Add Nuclei UX900 support

I'm happy enough with this series to grab it, but while I don't mind
taking some trivial binding changes with it, I don't want to take an
irqchip driver patch. Would you be able to apply the irqchip stuff
Thomas?

Cheers,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]