[PATCH] serial: tegra: remove Kconfig dependency on APB DMA controller

[Francesco Lavra <flavra@baylibre.com>]

This driver runs also on SoCs without a Tegra20 APB DMA controller (e.g.
Tegra234).
Remove the Kconfig dependency on TEGRA20_APB_DMA, and remove reference to
the APB DMA controller from the Kconfig help text.

Fixes: 60d2016a5161 ("arm64: tegra: Add Tegra234 GPCDMA device tree node")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
---
 drivers/tty/serial/Kconfig | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 44427415a80d..6212a814fdb7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -255,14 +255,13 @@ config SERIAL_SAMSUNG_CONSOLE
 
 config SERIAL_TEGRA
 	tristate "NVIDIA Tegra20/30 SoC serial controller"
-	depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
+	depends on ARCH_TEGRA || COMPILE_TEST
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
 	  providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not
 	  provide all of these ports, depending on how the serial port
-	  are enabled). This driver uses the APB DMA to achieve higher baudrate
-	  and better performance.
+	  are enabled).
 
 config SERIAL_TEGRA_TCU
 	tristate "NVIDIA Tegra Combined UART"
-- 
2.39.5