[PATCH v2 3/7] serial: 8250: Add serial8250_handle_irq_locked()

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

8250_port exports serial8250_handle_irq() to HW specific 8250 drivers.
It takes port's lock within but a HW specific 8250 driver may want to
take port's lock itself, do something, and then call the generic
handler in 8250_port but to do that, the caller has to release port's
lock for no good reason.

Introduce serial8250_handle_irq_locked() which a HW specific driver can
call while already holding port's lock.

As this is new export, put it straight into a namespace (where all 8250
exports should eventually be moved).

Tested-by: "Bandal, Shankar" <shankar.bandal@intel.com>
Tested-by: "Murthy, Shanth" <shanth.murthy@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/8250/8250_port.c | 24 ++++++++++++++++--------
 include/linux/serial_8250.h         |  1 +
 2 files changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index f7a3c5555204..bc223eb1f474 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -18,6 +18,7 @@
 #include <linux/irq.h>
 #include <linux/console.h>
 #include <linux/gpio/consumer.h>
+#include <linux/lockdep.h>
 #include <linux/sysrq.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
@@ -1782,20 +1783,16 @@ static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
 }
 
 /*
- * This handles the interrupt from one port.
+ * Context: port's lock must be held by the caller.
  */
-int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
+void serial8250_handle_irq_locked(struct uart_port *port, unsigned int iir)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct tty_port *tport = &port->state->port;
 	bool skip_rx = false;
-	unsigned long flags;
 	u16 status;
 
-	if (iir & UART_IIR_NO_INT)
-		return 0;
-
-	uart_port_lock_irqsave(port, &flags);
+	lockdep_assert_held_once(&port->lock);
 
 	status = serial_lsr_in(up);
 
@@ -1828,8 +1825,19 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 		else if (!up->dma->tx_running)
 			__stop_tx(up);
 	}
+}
+EXPORT_SYMBOL_NS_GPL(serial8250_handle_irq_locked, "SERIAL_8250");
 
-	uart_unlock_and_check_sysrq_irqrestore(port, flags);
+/*
+ * This handles the interrupt from one port.
+ */
+int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
+{
+	if (iir & UART_IIR_NO_INT)
+		return 0;
+
+	guard(uart_port_lock_irqsave)(port);
+	serial8250_handle_irq_locked(port, iir);
 
 	return 1;
 }
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 01efdce0fda0..a95b2d143d24 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -195,6 +195,7 @@ void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
 void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
 			       unsigned int quot);
 int fsl8250_handle_irq(struct uart_port *port);
+void serial8250_handle_irq_locked(struct uart_port *port, unsigned int iir);
 int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
 u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr);
 void serial8250_read_char(struct uart_8250_port *up, u16 lsr);
-- 
2.39.5