[PATCH v3 2/3] serial: sh-sci: Drop check for zero baud rate from uart_get_baud_rate()

[Biju <biju.das.au@gmail.com>]

From: Biju Das <biju.das.jz@bp.renesas.com>

On DT systems, a zero baud rate from uart_get_baud_rate() is not possible
even earlycon derives its bit rate from chosen/stdout-path. The zero baud
guard and its associated done label are therefore dead code. So remove it.

Also drop the unused done label from rsci_set_termios().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v3:
 * New patch
---
 drivers/tty/serial/rsci.c   | 3 ---
 drivers/tty/serial/sh-sci.c | 2 --
 2 files changed, 5 deletions(-)

diff --git a/drivers/tty/serial/rsci.c b/drivers/tty/serial/rsci.c
index b00c9e385169..40db9daa4272 100644
--- a/drivers/tty/serial/rsci.c
+++ b/drivers/tty/serial/rsci.c
@@ -265,8 +265,6 @@ static void rsci_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	baud = uart_get_baud_rate(port, termios, old, 0, max_freq);
-	if (!baud)
-		goto done;
 
 	/* Divided Functional Clock using standard Bit Rate Register */
 	err = sci_scbrr_calc(s, baud, &brr1, &srr1, &cks1);
@@ -278,7 +276,6 @@ static void rsci_set_termios(struct uart_port *port, struct ktermios *termios,
 		cks = cks1;
 	}
 
-done:
 	if (best_clk >= 0)
 		dev_dbg(port->dev, "Using clk %pC for %u%+d bps\n",
 			s->clks[best_clk], baud, min_err);
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7473b26ce9cf..9be359e04995 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2719,8 +2719,6 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 		max_freq = max(max_freq, s->clk_rates[i]);
 
 	baud = uart_get_baud_rate(port, termios, old, 0, max_freq / min_sr(s));
-	if (!baud)
-		goto done;
 
 	/*
 	 * There can be multiple sources for the sampling clock.  Find the one
-- 
2.43.0