[PATCH] serial: 8250_port: recognize UPIO_AU

[Manuel Lauss <manuel.lauss@gmail.com>]

My MIPS Alchemy systems generate the following warning during
probe of the 8250 driver:

WARNING: drivers/tty/serial/8250/8250_port.c:462 at set_io_from_upio+0xfc/0x124, CPU#0: swapper/0/1
Unsupported UART type 4
[...]
[<80521d40>] set_io_from_upio+0xfc/0x124
[<80521dfc>] serial8250_set_defaults+0x94/0xe0
[<80520fb4>] serial8250_register_8250_port+0x288/0x51c
[<805214ec>] serial8250_probe+0x160/0x1e8
[<8053b5f0>] platform_probe+0x64/0x90

The least invasive fix is to recognize UPIO_AU (type 4) in set_io_from_upio()
and do nothing, since all parameters have already been set up in
8250_rt288x.c::au_platform_setup().

Run-tested on Alchemy Au1300 platform.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
---
 drivers/tty/serial/8250/8250_port.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index af78cc02f38e..02e6cdefdbac 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -458,6 +458,8 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = io_serial_out;
 		break;
 #endif
+	case UPIO_AU:
+		break;
 	default:
 		WARN(p->iotype != UPIO_PORT || p->iobase,
 		     "Unsupported UART type %x\n", p->iotype);
-- 
2.54.0