Linux Serial subsystem development
 help / color / mirror / Atom feed
From: Linus Walleij <linusw@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Jiri Slaby <jirislaby@kernel.org>, Arnd Bergmann <arnd@arndb.de>
Cc: linux-serial@vger.kernel.org, Linus Walleij <linusw@kernel.org>
Subject: [PATCH v2] serial: 8250: handle ixp4xx register endianness correctly
Date: Thu, 09 Jul 2026 21:21:08 +0200	[thread overview]
Message-ID: <20260709-ixp4xx-serial-hackfix-v2-1-465fc8e4c54c@kernel.org> (raw)

From: Arnd Bergmann <arnd@arndb.de>

Unlike modern SoCs that just work in both big-endian and little-endian
mode using the readl()/writel() or readb()/writeb() accessors, the
internal registers on ixp4xx behave like native-endian 32-bit registers
in both modes, which requires adjusting the register address
when using 8-bit access.

The existing dts files are written for big-endian kernels and 8-bit
access, which does not work with little-endian kernels.

Add a quirk that makes the 8250 OF driver:

1. Mask off any hardcoded offset.
2. Add the += 3 offset if and only if we are running on big endian.

This should work in all combinations of big-endian and little-endian
kernels with either variant of the DTS file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[linusw@kernel.org: Modified to just play with the offset]
Signed-off-by: Linus Walleij <linusw@kernel.org>
---
Changes in v2:
- Use PTR_ALIGN_DOWN(*,4) instead of the custom &= 3, which also
  works with a pointer which is an unsigned char *
- Fix to the earlycon code to do the same thing as the main
  serial port.
- Link to v1: https://patch.msgid.link/20260709-ixp4xx-serial-hackfix-v1-1-cd1c29d02183@kernel.org
---
 drivers/tty/serial/8250/8250_early.c | 19 ++++++++++++++++++-
 drivers/tty/serial/8250/8250_of.c    | 12 ++++++++++++
 2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index dc0371857ecb..44ec209f37c4 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -23,6 +23,7 @@
  *	console=uart8250,mmio32,0xff5e0000,115200n8
  */
 
+#include <linux/align.h>
 #include <linux/tty.h>
 #include <linux/init.h>
 #include <linux/console.h>
@@ -177,6 +178,23 @@ OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
 OF_EARLYCON_DECLARE(uart, "nvidia,tegra20-uart", early_serial8250_setup);
 OF_EARLYCON_DECLARE(uart, "snps,dw-apb-uart", early_serial8250_setup);
 
+static int __init early_serial8250_xscale_setup(struct earlycon_device *device,
+					     const char *options)
+{
+	/*
+	 * Adjust for BE32 register accesses: drop any hardcoded
+	 * address for the big endian byte target, add it explicitly
+	 * if running on BE32.
+	 */
+	device->port.membase = PTR_ALIGN_DOWN(device->port.membase, 4);
+	if (IS_ENABLED(CONFIG_CPU_ENDIAN_BE32))
+		device->port.membase += 3;
+	device->port.regshift = 2;
+
+	return early_serial8250_setup(device, options);
+}
+OF_EARLYCON_DECLARE(uart, "intel,xscale-uart", early_serial8250_xscale_setup);
+
 static int __init early_serial8250_rs2_setup(struct earlycon_device *device,
 					     const char *options)
 {
@@ -184,7 +202,6 @@ static int __init early_serial8250_rs2_setup(struct earlycon_device *device,
 
 	return early_serial8250_setup(device, options);
 }
-OF_EARLYCON_DECLARE(uart, "intel,xscale-uart", early_serial8250_rs2_setup);
 OF_EARLYCON_DECLARE(uart, "mrvl,mmp-uart", early_serial8250_rs2_setup);
 OF_EARLYCON_DECLARE(uart, "mrvl,pxa-uart", early_serial8250_rs2_setup);
 
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 81644d40b09a..f0537fb6ef4f 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -5,6 +5,7 @@
  *    Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
  */
 
+#include <linux/align.h>
 #include <linux/bits.h>
 #include <linux/console.h>
 #include <linux/math.h>
@@ -122,6 +123,17 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	if (ret)
 		goto err_pmruntime;
 
+	if (IS_ENABLED(CONFIG_CPU_XSCALE) && type == PORT_XSCALE) {
+		/*
+		 * Adjust for BE32 register accesses: drop any hardcoded
+		 * address for the big endian byte target, add it explicitly
+		 * if running on BE32.
+		 */
+		port->mapbase = PTR_ALIGN_DOWN(port->mapbase, 4);
+		if (IS_ENABLED(CONFIG_CPU_ENDIAN_BE32))
+			port->mapbase += 3;
+	}
+
 	/* Get clk rate through clk driver if present */
 	if (!port->uartclk) {
 		struct clk *bus_clk;

---
base-commit: dc59e4fea9d83f03bad6bddf3fa2e52491777482
change-id: 20260709-ixp4xx-serial-hackfix-c5cd90dcca93

Best regards,
--  
Linus Walleij <linusw@kernel.org>


             reply	other threads:[~2026-07-09 19:21 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-09 19:21 Linus Walleij [this message]
2026-07-09 20:33 ` [PATCH v2] serial: 8250: handle ixp4xx register endianness correctly Arnd Bergmann
2026-07-09 21:24   ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260709-ixp4xx-serial-hackfix-v2-1-465fc8e4c54c@kernel.org \
    --to=linusw@kernel.org \
    --cc=arnd@arndb.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=jirislaby@kernel.org \
    --cc=linux-serial@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox