[PATCH tty 1/1] serial: 8250: Change console_msr_work to IRQ_WORK_LAZY

[John Ogness <john.ogness@linutronix.de>]

For some platforms it is a problem to queue irq_work when entering
cpuidle states. Since irq_work is used for deferred MSR handling,
any atomic console printing when entering cpuidle states can lead
to the affected hardware hanging. Tegra20 and Tegra30 are examples
of such platforms. Avoiding raising the irq_work IRQ has shown to
circumvent the problem.

Change the console_msr_work to be IRQ_WORK_LAZY, thus not raising
an IRQ upon irq_work queuing. The irq_work is then handled on the
next interrupt (worst case, kernel tick).

Link: https://lore.kernel.org/lkml/f3757a75-0ba1-4558-bf57-f19ab7e59a4c@nvidia.com
Fixes: d3539347022a ("serial: 8250: Switch to nbcon console, take 2")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
---
 drivers/tty/serial/8250/8250_port.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 38fa45e74a37a..1acb73e45f8a0 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -3597,7 +3597,7 @@ int serial8250_console_setup(struct uart_port *port, char *options, bool probe)
 
 	up->console_line_ended = true;
 	up->console_msr_work_allow = true;
-	init_irq_work(&up->console_msr_work, console_msr_handler);
+	up->console_msr_work = IRQ_WORK_INIT_LAZY(console_msr_handler);
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
-- 
2.47.3