From: Tate Whiteberg <whiteberg@arista.com>
To: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Tate Whiteberg <whiteberg@arista.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
Andy Shevchenko <andy@kernel.org>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
Subject: [PATCH v2 1/2] serial: 8250: export and rename wait_for_xmitr()
Date: Fri, 28 Aug 2026 17:57:27 +0000 [thread overview]
Message-ID: <20260828175733.1650267-2-whiteberg@arista.com> (raw)
In-Reply-To: <20260828175733.1650267-1-whiteberg@arista.com>
Export wait_for_xmitr() and rename it to follow naming convention.
Signed-off-by: Tate Whiteberg <whiteberg@arista.com>
---
Changes in v2:
- Separate this patch from successor patch.
drivers/tty/serial/8250/8250.h | 1 +
drivers/tty/serial/8250/8250_port.c | 13 +++++++------
2 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 9337fec9394e..f99620b1cab7 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -180,6 +180,7 @@ void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p);
void serial8250_fifo_wait_for_lsr_thre(struct uart_8250_port *up,
struct nbcon_write_context *wctxt,
unsigned int count);
+void serial8250_wait_for_xmitr(struct uart_8250_port *up, int bits);
void serial8250_rpm_get(struct uart_8250_port *p);
void serial8250_rpm_put(struct uart_8250_port *p);
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 38fa45e74a37..4eaf417f1fd7 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2024,7 +2024,7 @@ static bool wait_for_lsr(struct uart_8250_port *up, int bits)
}
/* Wait for transmitter and holding register to empty with timeout */
-static void wait_for_xmitr(struct uart_8250_port *up, int bits)
+void serial8250_wait_for_xmitr(struct uart_8250_port *up, int bits)
{
unsigned int tmout;
bool tx_ready;
@@ -2052,6 +2052,7 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
}
}
}
+EXPORT_SYMBOL_NS_GPL(serial8250_wait_for_xmitr, "SERIAL_8250");
#ifdef CONFIG_CONSOLE_POLL
/*
@@ -2098,7 +2099,7 @@ static void serial8250_put_poll_char(struct uart_port *port,
ier = serial_port_in(port, UART_IER);
__serial8250_clear_IER(up);
- wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
+ serial8250_wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
/*
* Send the character out.
*/
@@ -2108,7 +2109,7 @@ static void serial8250_put_poll_char(struct uart_port *port,
* Finally, wait for transmitter to become empty
* and restore the IER
*/
- wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
+ serial8250_wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
serial_port_out(port, UART_IER, ier);
}
@@ -2223,7 +2224,7 @@ static void serial8250_THRE_test(struct uart_port *port)
* Synchronize UART_IER access against the console.
*/
scoped_guard(uart_port_lock_irqsave, port) {
- wait_for_xmitr(up, UART_LSR_THRE);
+ serial8250_wait_for_xmitr(up, UART_LSR_THRE);
serial_port_out_sync(port, UART_IER, UART_IER_THRI);
udelay(1); /* allow THRE to set */
iir_noint1 = serial_port_in(port, UART_IIR) & UART_IIR_NO_INT;
@@ -3293,7 +3294,7 @@ static void serial8250_console_wait_putchar(struct uart_port *port, unsigned cha
{
struct uart_8250_port *up = up_to_u8250p(port);
- wait_for_xmitr(up, UART_LSR_THRE);
+ serial8250_wait_for_xmitr(up, UART_LSR_THRE);
serial8250_console_putchar(port, ch);
}
@@ -3504,7 +3505,7 @@ void serial8250_console_write(struct uart_8250_port *up,
* Finally, wait for transmitter to become empty
* and restore the IER
*/
- wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
+ serial8250_wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
if (em485) {
mdelay(port->rs485.delay_rts_after_send);
--
2.43.0
next prev parent reply other threads:[~2026-08-28 17:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-28 17:57 [PATCH v2 0/2] serial: 8250_mid: fix race condition between output flush and termios update Tate Whiteberg
2026-08-28 17:57 ` Tate Whiteberg [this message]
2026-08-28 18:06 ` [PATCH v2 1/2] serial: 8250: export and rename wait_for_xmitr() sashiko-bot
2026-08-31 7:32 ` Andy Shevchenko
2026-08-28 17:57 ` [PATCH v2 2/2] serial: 8250_mid: wait for LSR tx empty before setting termios Tate Whiteberg
2026-08-28 18:14 ` sashiko-bot
2026-08-31 3:07 ` Jiri Slaby
2026-08-31 6:54 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260828175733.1650267-2-whiteberg@arista.com \
--to=whiteberg@arista.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).