Linux Serial subsystem development
 help / color / mirror / Atom feed
From: Jaidev Shastri via B4 Relay <devnull+jaidevshastri.vt.edu@kernel.org>
To: Russell King <linux@armlinux.org.uk>,
	 Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Jiri Slaby <jirislaby@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
	 Jaidev Shastri <jaidevshastri@vt.edu>
Subject: [PATCH] serial: amba-pl011: publish amba_ports[] entries with release semantics
Date: Mon, 21 Sep 2026 21:20:12 -0400	[thread overview]
Message-ID: <20260921-mb-pl011-v1-1-b378bb057d43@vt.edu> (raw)

From: Jaidev Shastri <jaidevshastri@vt.edu>

pl011_setup_port() fills the port structure and then stores its address
into amba_ports[] with a plain store. The console callbacks read the
slot through co->index with plain loads.

Store the slot with smp_store_release() and read it with
smp_load_acquire().

Found with MBCheck, a static herd7-based memory consistency checker.

Signed-off-by: Jaidev Shastri <jaidevshastri@vt.edu>
---
 drivers/tty/serial/amba-pl011.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c4824c201..696c12ca9 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2536,7 +2536,8 @@ static int pl011_console_setup(struct console *co, char *options)
 	 */
 	if (co->index >= UART_NR)
 		co->index = 0;
-	uap = amba_ports[co->index];
+	/* Pairs with the smp_store_release() in pl011_setup_port(). */
+	uap = smp_load_acquire(&amba_ports[co->index]);
 	if (!uap)
 		return -ENODEV;
 
@@ -2574,7 +2575,8 @@ static int pl011_console_setup(struct console *co, char *options)
 
 static int pl011_console_exit(struct console *co)
 {
-	struct uart_amba_port *uap = amba_ports[co->index];
+	/* Pairs with the smp_store_release() in pl011_setup_port(). */
+	struct uart_amba_port *uap = smp_load_acquire(&amba_ports[co->index]);
 
 	clk_disable_unprepare(uap->clk);
 
@@ -2644,7 +2646,8 @@ static int pl011_console_match(struct console *co, char *name, int idx,
 static void
 pl011_console_write_atomic(struct console *co, struct nbcon_write_context *wctxt)
 {
-	struct uart_amba_port *uap = amba_ports[co->index];
+	/* Pairs with the smp_store_release() in pl011_setup_port(). */
+	struct uart_amba_port *uap = smp_load_acquire(&amba_ports[co->index]);
 	unsigned int old_cr = 0;
 
 	if (!nbcon_enter_unsafe(wctxt))
@@ -2672,7 +2675,8 @@ pl011_console_write_atomic(struct console *co, struct nbcon_write_context *wctxt
 static void
 pl011_console_write_thread(struct console *co, struct nbcon_write_context *wctxt)
 {
-	struct uart_amba_port *uap = amba_ports[co->index];
+	/* Pairs with the smp_store_release() in pl011_setup_port(). */
+	struct uart_amba_port *uap = smp_load_acquire(&amba_ports[co->index]);
 	unsigned int old_cr = 0;
 
 	if (!nbcon_enter_unsafe(wctxt))
@@ -2983,7 +2987,8 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
 	if (ret)
 		return ret;
 
-	amba_ports[index] = uap;
+	/* Pairs with the smp_load_acquire() in the console callbacks. */
+	smp_store_release(&amba_ports[index], uap);
 
 	return 0;
 }

---
base-commit: 93f51579e7df248780214094418f205253383cc5
change-id: 20260921-mb-pl011-35ffcc30d55f

Best regards,
--  
Jaidev Shastri <jaidevshastri@vt.edu>



             reply	other threads:[~2026-09-22  1:20 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-22  1:20 Jaidev Shastri via B4 Relay [this message]
2026-09-22  1:28 ` [PATCH] serial: amba-pl011: publish amba_ports[] entries with release semantics sashiko-bot
2026-09-23 12:09 ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260921-mb-pl011-v1-1-b378bb057d43@vt.edu \
    --to=devnull+jaidevshastri.vt.edu@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jaidevshastri@vt.edu \
    --cc=jirislaby@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox