From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.remote-ip=209.85.128.46 ARC-Seal: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=none; t=1793399836; b=YY3V9lFIQSbwJyIfM+Cdxp4xr9ujjDv4pKI08AZGdEZrjW1mr79tmPGb8+435VqXYOUK Xcdy1S6yGQfrjK8zKu08eHGAdca6tPMl/bTpiaCTZKOKmSzT4oPKj/K+ArpvpMTdbEnf0 pjH7afhBPkxYQhqeXwb0GA6bhKJwPGFuhj01DSCxhnLYr0Z14uT19G4h1ubjtnmbdNNQW 0BhuAtfZoI8KgPmdOZKgCxSBtX/r3Mjm9d+KcYCJfrtWPSkjbNUfkNl4l7nQaSL5TXlIZ yuObZc+l9GXIvU4b5PeZuAl46nB5Aq419K0Gv0k3ba3HH/jaBU5GX1QaCHfcowg/akA== ARC-Message-Signature: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1793399836; h=DMARC-Filter:Received:DKIM-Signature:X-Google-DKIM-Signature: X-Forwarded-Encrypted:X-Gm-Message-State:X-Gm-Gg:X-Received:Received: From:To:Cc:Subject:Date:Message-ID:X-Mailer:In-Reply-To:References: MIME-Version:Content-Transfer-Encoding; bh=tZyvsNnXMh56pai5U5Ss1kd8tGraHDrvslv6z3x9w14=; b=A4ghQcQO9o/KM20aj5BXuKomhTIR0fJZwKTRwwJ4JidKB9AN6F1Tto7Ua5VMgISX9bc5 Yj1hUFwpQiCQKymeF63pDlyduOLtz1oP3WJn5X61eonieEoLwMhXtILAG2qJioOCMarUX i7dCCW5LlsICq0QjkJDzLNeojC+IK7uMl2Er/8Ict4H7BA/hcTNHMWfZAY+7pj1YYZO+N 2C1rnaIZbjEXHWYE/6N7l5ia37aa2V+VkTCUYmgsDsAaQ/xoLoVSnW3wSgUEKkyjnNFfm YMaxgsv4MKEX0hmjYjusEcSkfjndqQw1aPTcu80rRA0+2KWXU66L5Uu4iwwa8rc879g== ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20260707 header.b=lXsEmerP; arc=none smtp.remote-ip=209.85.128.46 Received: from mail-wm1-f46.google.com (mail-wm1-f46.google.com [209.85.128.46]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature ECDSA (prime256v1) server-digest SHA256) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 45E1F606A31E for ; Fri, 30 Oct 2026 22:37:16 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.2 smtp.subspace.kernel.org 45E1F606A31E Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key, unprotected) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20260707 header.b=lXsEmerP Received: by mail-wm1-f46.google.com with SMTP id 5b1f17b1804b1-4a208d93758so12993305e9.3 for ; Fri, 30 Oct 2026 15:37:16 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20260707; t=1793399835; x=1794004635; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=tZyvsNnXMh56pai5U5Ss1kd8tGraHDrvslv6z3x9w14=; b=lXsEmerPy41FiZUadHpGhU9/RRwjtTquaIaHnhtDYeUcOZvVZWKp/jBfv1dkqYKa4G W6DB2wLtmrbrxq0ocPiK9ZdVMNdgQcxNSH9xjXG5vkgP2Hr7XGCSMO/Rs45yyfvr+OJM G6N8WxO8cVxARay1xNjZbMXcnoBeicgNvfMpozJJdRP6ab9AaSDngIy/h6bpW0LM/JqN FyqmRiR8m96n8b+ukhxa4hDp2cW81X7TAchROnadfKxNc8U1e5i/X1C7TLwi9zs5msgr c8mWwuqXKMKeBFMu+7hjNd4iQYEqmcbfT8MZu51UlMbbadeXoWVG+KQdfV0frKVH8bqh hWfg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1793399835; x=1794004635; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to:content-type; bh=tZyvsNnXMh56pai5U5Ss1kd8tGraHDrvslv6z3x9w14=; b=hCtZhsetoIZATPq5b4UoWBhSd/V/qobtmbMK+AnzyCDcFW9JHVRRITWY/mSkCq2sbf 7m9vIzJI9buGAwDsV6cmYSXxXKDi7RY+4BpNQu6AHRnfZf3Zi2GFJpvx5Ook+U7c+lOP 5R/uMn5gVve+7bET0dxkE4B+H6Rt8WgROYAKG1j+DyLsLmDAYMaVRtUtliz22iNNHSGT 0oPY0Sn+V2Bn+//oJ3z8Hac9M90r0+X5Lm5dNyyyth6p+2Li7daCRkEhxqmqSzNtbyZc sOn/MbUjRlmiOscP9HauiYOucps62zyxQUcFGHwcMmBO6rFdFAbJDD2AsK1vUwbb1bzQ DZkg== X-Forwarded-Encrypted: i=1; AKwUvBwOvWF+9ETFqJeutxKT8taFf3yuNwHmaSl+rOB8D1By9MKYVrQKTWcDFw2Q4BvTVK4j8K1EX+gJK8sWX6k=@vger.kernel.org X-Gm-Message-State: AFq9FYJp49GgrXlxpBTbm3g+H2tMcBwjPeZBs4CD94qrCfZ6xWqjrmfA asuvAdvJuEes5HRDEXv1W1QIYZaYgUqYhUEY5tOLppifCXyK6jNMo0Me X-Gm-Gg: AYBFou0nyebCUSabH4vx5P01sZ4wThosFOrZnBZ756UaZxoJzv2gNZOJ+E7eEyXxDE9 W4HRrps9/LXW3C/vpdhny+tvwL53/1n7+F9vfdB4LXRyg5TSyklu072AaGLsU/Pcr+4rZYktKwH abmDXntvkBIiXYHTT6kRYSXs2dbdzJYawBKC34sQwjGRW2jJfAV9Yz3R5ZyaQG8ghdPMhFd3aGB 0eU4j3JolQtEz5rZAOX3H0gi54YY6TQEPpF88XB5Jz5E01egbla4s0L/D6JiLnn3wbC4yoNIDyG lFhOjRB8WyqeMJh2WzXQMmSi1XWmT97qnlPhVx8kBqf+7tdBg1F8E1TzuV/lJCMozjuo5EJcMps 9AhBAX32gpi6yziL08i/L6Byloqubey9cuHTi6b/igztoj76NWG1fncqIQ7Uvr1qLiFeBg5+rSj IORyu4LbEVeyUtk8bIMHKxbVhbTOnuE9k7fZMsFbEt7Z7hK3AdFasAeSpNozvafiC3wxC7URgHo FxcWPNaC4hI32+wAFf/alB6GE73qqePJmafBef+U6NtZu+qZf+W9hgq+t9MbKxNbOAEBuBi1C0R 2wD5+aVvhzCvQY/7mTrUuPZiowISBTobLffjuIV2dSG3lZkb5A== X-Received: by 2002:a05:600c:840e:b0:4a1:813f:2a60 with SMTP id 5b1f17b1804b1-4ac17d168b1mr89453445e9.11.1793399834458; Fri, 30 Oct 2026 15:37:14 -0700 (PDT) Received: from m2.. ([37.142.145.227]) by smtp.googlemail.com with ESMTPSA id ffacd0b85a97d-48e71b959c1sm5457300f8f.45.2026.10.30.15.37.12 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 30 Oct 2026 15:37:14 -0700 (PDT) From: Michael Zaidman To: Jiri Kosina , Benjamin Tissoires Cc: Linus Walleij , Bartosz Golaszewski , Greg Kroah-Hartman , Jiri Slaby , Raman Varabets , Germain Hebert , Christina Quast , Rio Liu , Bruno Giacomazzi , linux-input@vger.kernel.org, linux-serial@vger.kernel.org, linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, Michael Zaidman Subject: [PATCH v2 08/15] HID: ft260: uart: add modem pins control via ioctl Date: Sat, 31 Oct 2026 00:36:30 +0200 Message-ID: <20261030223637.86907-9-michael.zaidman@gmail.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20261030223637.86907-1-michael.zaidman@gmail.com> References: <20261030223637.86907-1-michael.zaidman@gmail.com> X-Mailing-List: linux-serial@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Add TIOCMGET/TIOCMSET (and thus TIOCMBIS/TIOCMBIC) support so userspace can drive DTR/RTS when the modem pins are in GPIO mode. This enables programming an ESP32 over the FT260 with esptool, which resets the chip via those lines. Also key GPIO sysfs registration off chip_mode rather than USB interface number 0, and include DCD/RI in UART mode 3/4 GPIO sets so the modem mask matches the pins esptool needs. The RTS, CTS, DTR and DSR pins are active-low, so TIOCMGET inverts the sense of those four lines and TIOCMSET drives 0 to assert them. DCD and RI are not inverted. Rio Liu found and fixed the polarity. Keep the errno from ft260_get_interface_type() so a failed status read does not probe-succeed after teardown. Return -EINVAL when the modem pins are not in GPIO mode, propagate gpio_get_all() errors from TIOCMGET, and copy the GPIO shadow under the port lock for TIOCMSET (reported by Sashiko). Co-developed-by: Rio Liu Signed-off-by: Rio Liu Signed-off-by: Michael Zaidman --- v2: polarity fix folded in (Rio Liu); preserve get_interface_type errno; tiocmget/tiocmset error paths and locked shadow copy (reported by Sashiko). --- drivers/hid/hid-ft260.c | 150 +++++++++++++++++++++++++++++++++++----- 1 file changed, 131 insertions(+), 19 deletions(-) diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c index 4b0b55c98f90..4106066b6a89 100644 --- a/drivers/hid/hid-ft260.c +++ b/drivers/hid/hid-ft260.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -183,7 +184,7 @@ enum { FT260_GPIO_DIR_OUTPUT = 0x01, }; -/* GPIO offsets */ +/* GPIO bit masks */ #define FT260_GPIO_0 BIT(0) #define FT260_GPIO_1 BIT(1) #define FT260_GPIO_2 BIT(2) @@ -213,7 +214,8 @@ enum { #define FT260_GPIO_UART_MODE_1_SET FT260_GPIO_UART_DTR_DSR #define FT260_GPIO_UART_MODE_2_SET FT260_GPIO_UART_RTS_CTS #define FT260_GPIO_UART_MODE_3_SET (FT260_GPIO_UART_RTS_CTS | \ - FT260_GPIO_UART_DTR_DSR) + FT260_GPIO_UART_DTR_DSR | \ + FT260_GPIO_UART_DCD_RI) #define FT260_GPIO_UART_MODE_4_SET FT260_GPIO_UART_MODE_3_SET #define FT260_GPIO_UART_DEFAULT FT260_GPIO_UART_MODE_0_SET #define FT260_GPIO_UART_MODE_1_CLR (FT260_GPIO_UART_RX_TX | \ @@ -223,6 +225,16 @@ enum { #define FT260_GPIO_UART_MODE_3_CLR FT260_GPIO_UART_RX_TX #define FT260_GPIO_UART_MODES 5 +/* UART modem control GPIO offsets */ +enum { + FT260_GPIO_UART_DCD = (4), + FT260_GPIO_UART_RI = (5), + FT260_GPIO_UART_RTS = (7), + FT260_GPIO_UART_CTS = (10), + FT260_GPIO_UART_DTR = (11), + FT260_GPIO_UART_DSR = (13), +}; + #define FT260_SET_REQUEST_VALUE(report_id) ((FT260_FEATURE << 8) | (report_id)) /* Feature In reports */ @@ -449,6 +461,7 @@ MODULE_DEVICE_TABLE(hid, ft260_devices); struct ft260_device { struct i2c_adapter adap; struct hid_device *hdev; + int chip_mode; int iface_type; int iface_id; struct list_head device_list; @@ -1106,7 +1119,27 @@ static void ft260_gpio_en_update(struct hid_device *hdev, u8 req, u8 value) else ft260_gpio_en_clr(dev, bitmap); exit: - hid_info(hdev, "enabled GPIOs: %04x\n", dev->gpio_en); + hid_info(hdev, "enabled GPIOs: %04x, bitmap %04x\n", + dev->gpio_en, bitmap); +} + +static void ft260_gpio_output_cfg(struct ft260_gpio_state *gpio, + u32 offset, int value) +{ + if (offset < FT260_GPIO_0_5_COUNT) { + gpio->dirs |= BIT(offset); + if (value) + gpio->vals |= !!value << offset; + else + gpio->vals &= ~BIT(offset); + } else { + offset = offset - FT260_GPIO_0_5_COUNT; + gpio->ex_dirs |= BIT(offset); + if (value) + gpio->ex_vals |= !!value << offset; + else + gpio->ex_vals &= ~BIT(offset); + } } static int ft260_gpio_set(struct gpio_chip *gc, u32 offset, int value) @@ -1155,7 +1188,7 @@ static int ft260_gpio_set(struct gpio_chip *gc, u32 offset, int value) rep.gpio.ex_vals &= ~BIT(offset); } - ft260_dbg("dirs %#02x vals %#02x ex_dir %#02x ex_vals %#02x\n", + ft260_dbg("dirs %#02x vals %#02x ex_dirs %#02x ex_vals %#02x\n", rep.gpio.dirs, rep.gpio.vals, rep.gpio.ex_dirs, rep.gpio.ex_vals); @@ -1307,8 +1340,6 @@ static int ft260_gpio_init(struct ft260_device *dev, char prefix[] = "ft260_"; u8 mode = cfg->chip_mode; - hid_info(hdev, "initialize gpio chip\n"); - dev->gpio_uart_mode[0] = (u16)FT260_GPIO_UART_MODE_0_SET; dev->gpio_uart_mode[1] = (u16)FT260_GPIO_UART_MODE_1_SET; dev->gpio_uart_mode[2] = (u16)FT260_GPIO_UART_MODE_2_SET; @@ -1352,7 +1383,6 @@ static int ft260_gpio_init(struct ft260_device *dev, goto exit; } snprintf(label, label_sz, "%s%s", prefix, dev_name(&hdev->dev)); - hid_info(hdev, "initialize gpio chip on %s\n", label); dev->gc->label = label; dev->gc->direction_input = ft260_gpio_direction_input; @@ -1423,6 +1453,7 @@ static int ft260_get_interface_type(struct ft260_device *dev, ft260_dbg("wakeup_int: 0x%02x\n", cfg->enable_wakeup_int); dev->power_saving_en = cfg->power_saving_en; + dev->chip_mode = cfg->chip_mode; switch (cfg->chip_mode) { case FT260_MODE_ALL: @@ -1440,7 +1471,6 @@ static int ft260_get_interface_type(struct ft260_device *dev, break; } - dev->iface_type = ret; return ret; } @@ -1941,6 +1971,80 @@ static void ft260_uart_set_termios(struct tty_struct *tty, ft260_uart_change_speed(port, &tty->termios, NULL); } +static int ft260_uart_tiocmget(struct tty_struct *tty) +{ + struct ft260_device *port = tty->driver_data; + int gpios; + + /* + * The modem lines control via ioctl is allowed only + * when the related pins are in the gpio mode. + */ + int mask = FT260_GPIO_UART_MODE_4_SET; + + if ((port->gpio_en & mask) != mask) { + ft260_dbg("Illegal gpio config %#02x != mask %#04x\n", + port->gpio_en, mask); + return -EINVAL; + } + + gpios = ft260_gpio_get_all(port->gc, FT260_GPIO_VALUE); + if (gpios < 0) + return gpios; + + return ((!(gpios & FT260_GPIO_B) ? TIOCM_RTS : 0) | + (!(gpios & FT260_GPIO_E) ? TIOCM_CTS : 0) | + (!(gpios & FT260_GPIO_F) ? TIOCM_DTR : 0) | + (!(gpios & FT260_GPIO_H) ? TIOCM_DSR : 0) | + ((gpios & FT260_GPIO_4) ? TIOCM_CAR : 0) | + ((gpios & FT260_GPIO_5) ? TIOCM_RNG : 0)); +} + +static int ft260_uart_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + int ret; + struct ft260_device *port = tty->driver_data; + struct ft260_gpio_write_request_report rep; + struct hid_device *hdev = port->hdev; + int mask = FT260_GPIO_UART_MODE_4_SET; + + if ((port->gpio_en & mask) != mask) { + ft260_dbg("Illegal gpio config %#02x != mask %#04x\n", + port->gpio_en, mask); + return -EINVAL; + } + rep.report = FT260_GPIO; + + mutex_lock(&port->lock); + rep.gpio = port->gpio; + + if (set & TIOCM_RTS) + ft260_gpio_output_cfg(&rep.gpio, FT260_GPIO_UART_RTS, 0); + if (set & TIOCM_DTR) + ft260_gpio_output_cfg(&rep.gpio, FT260_GPIO_UART_DTR, 0); + if (clear & TIOCM_RTS) + ft260_gpio_output_cfg(&rep.gpio, FT260_GPIO_UART_RTS, 1); + if (clear & TIOCM_DTR) + ft260_gpio_output_cfg(&rep.gpio, FT260_GPIO_UART_DTR, 1); + + ft260_dbg("dirs %#02x vals %#02x ex_dirs %#02x ex_vals %#02x\n", + rep.gpio.dirs, rep.gpio.vals, + rep.gpio.ex_dirs, rep.gpio.ex_vals); + + ret = ft260_hid_feature_report_set(hdev, (u8 *)&rep, sizeof(rep)); + if (unlikely(ret < 0)) { + hid_err(hdev, "%s: cannot set GPIO: %d\n", __func__, ret); + mutex_unlock(&port->lock); + return -EIO; + } + + port->gpio = rep.gpio; + mutex_unlock(&port->lock); + + return 0; +} + static int ft260_uart_install(struct tty_driver *driver, struct tty_struct *tty) { int idx = tty->index; @@ -2021,6 +2125,8 @@ static const struct tty_operations ft260_uart_ops = { .write_room = ft260_uart_write_room, .chars_in_buffer = ft260_uart_chars_in_buffer, .set_termios = ft260_uart_set_termios, + .tiocmget = ft260_uart_tiocmget, + .tiocmset = ft260_uart_tiocmset, .hangup = ft260_uart_hangup, .install = ft260_uart_install, .cleanup = ft260_uart_cleanup, @@ -2164,14 +2270,16 @@ static int ft260_i2c_probe(struct ft260_device *dev, return ret; } - ret = ft260_gpio_init(dev, cfg); - if (ret) - goto err_i2c_free; + if (cfg->chip_mode == FT260_MODE_I2C) { + ret = ft260_gpio_init(dev, cfg); + if (ret) + goto err_i2c_free; - ret = sysfs_create_group(&hdev->dev.kobj, &ft260_attr_group); - if (ret < 0) { - hid_err(hdev, "failed to create sysfs attrs\n"); - goto err_i2c_free; + ret = sysfs_create_group(&hdev->dev.kobj, &ft260_attr_group); + if (ret < 0) { + hid_err(hdev, "failed to create sysfs attrs\n"); + goto err_i2c_free; + } } return 0; @@ -2232,7 +2340,8 @@ static int ft260_uart_probe(struct ft260_device *dev, cfg->uart_mode = FT260_UART_CFG_FLOW_CTRL_NONE; - if (dev->iface_id == 0) { + if (dev->chip_mode & FT260_MODE_UART || + dev->chip_mode == FT260_MODE_ALL) { ret = ft260_gpio_init(dev, cfg); if (ret) goto err_hid_report; @@ -2311,8 +2420,9 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id) ret = ft260_get_interface_type(dev, &cfg); if (ret <= FT260_IFACE_NONE) goto err_hid_close; + dev->iface_type = ret; - if (ret == FT260_IFACE_I2C) { + if (dev->iface_type == FT260_IFACE_I2C) { ret = ft260_i2c_probe(dev, &cfg); if (ret) goto err_hid_close; @@ -2353,10 +2463,12 @@ static void ft260_remove(struct hid_device *hdev) tty_port_unregister_device(&dev->port, ft260_tty_driver, dev->index); ft260_uart_port_remove(dev); - if (dev->iface_id == 0) + if (dev->chip_mode & FT260_MODE_UART || + dev->chip_mode == FT260_MODE_ALL) sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group); } else { - sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group); + if (dev->chip_mode == FT260_MODE_I2C) + sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group); i2c_del_adapter(&dev->adap); } -- 2.43.0