Re: [PATCH v2 11/12] arm64: dts: rockchip: Add rk3576 SoC base DT

[Detlev Casanova <detlev.casanova@collabora.com>]

On Sunday, 25 August 2024 10:08:24 EDT Chukun Pan wrote:
> Hi,
> 
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> > ...
> > +		opp-1416000000 {
> > +			opp-hz = /bits/ 64 <1416000000>;
> > +			opp-microvolt = <725000 725000 950000>;
> > +			opp-microvolt-L1 = <712500 712500 950000>;
> > +			opp-microvolt-L2 = <700000 700000 950000>;
> > +			opp-microvolt-L3 = <700000 700000 950000>;
> > +			opp-microvolt-L4 = <700000 700000 950000>;
> > +			opp-microvolt-L5 = <700000 700000 950000>;
> > +			clock-latency-ns = <40000>;
> > +		};
> > ...
> 
> I'm curious if these frequencies work properly. On the bsp kernel,
> 'opp-microvolt-L<name>' is used by the PVTM driver, I don't know
> if it works on the upstream kernel. Sorry but have you tested it
> with mhz (https://github.com/wtarreau/mhz)?

Running mhz gives me:
# ./mhz
count=566627 us50=19994 us250=99977 diff=79983 cpu_MHz=1416.869

Which seems to correspond to the set opp-hz value. As mentionned by Alexey, 
the opp-microvolt-L.* values are not used by the driver.

I also have not tested any cpufreq settings/driver on this board yet. I can 
remove the opp-microvolt-L.* for now.

Detlev.