NetMos Technology PCI 9835

NetMos Technology PCI 9835

[Russell Shaw]

Hi,
I compiled in the parport and serial port options in menuconfig for the above dual serial card. 
kernel 2.6.10 on debian-sid, athlon MB.

It still won't work:(

lspci -vv -s 0:b.0 shows:

0000:00:0b.0 Serial controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01) (prog-if 02 
[16550])
         Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART)
         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- 
<PERR-
         Interrupt: pin A routed to IRQ 19
         Region 0: I/O ports at cc00 [size=8]
         Region 1: I/O ports at d000 [size=8]
         Region 2: I/O ports at d400 [size=8]
         Region 3: I/O ports at d800 [size=8]
         Region 4: I/O ports at dc00 [size=8]
         Region 5: I/O ports at e000 [size=16]

Is that IRQ 19 real or bogus?

I tried: setserial /dev/ttyS2 port 0xdc00 uart 16550 irq 19
then: cat test > /dev/ttyS2

with various port and irq settings, but the command blocks for 10secs
then returns.