[PATCH 0/4] serial: 8250 driver improvements & Cavium OCTEON serial support

[PATCH 0/4] serial: 8250 driver improvements & Cavium OCTEON serial support

[David Daney]

This is a follow up to the 'Allow for replaceable I/O functions in
8250 driver' patch I sent yesterday.  I hope it addresses the issues
raised by Alan Cox and Arnd Bergmann.

The four parts of the patch are as follows:

1/4) Add replaceable I/O functions to the 8250 driver.  This allows
     platform specific register access code to be moved out of the
     driver into the platform support files.

2/4) Add a new port flag UPF_FIXED_TYPE that allows callers of
     serial8250_register_port() to specify the port type and disables
     probing.

3/4) Add a 'bugs' field to the serial8250_config.  Used in conjunction
     with 2/4, this allows the bugs flags to be set without probing.

4/4) Add an entry to uart_config for PORT_OCTEON describing the
     OCTEON's internal UARTs.  Two new bug flags are defined to
     account for PORT_OCTEON's peculiarities.

Comments welcome,

David Daney

[PATCH 1/4] serial: 8250 driver replaceable i/o functions.

[David Daney]

In order to use Cavium OCTEON specific serial i/o drivers, we first patch
the 8250 driver to use replaceable i/o functions.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
---
 drivers/serial/8250.c       |  185 +++++++++++++++++++++++++++++--------------
 include/linux/serial_8250.h |    2 +
 include/linux/serial_core.h |    2 +
 3 files changed, 131 insertions(+), 58 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 9ccc563..02771d6 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -288,16 +288,16 @@ static const u8 au_io_out_map[] = {
 };
 
 /* sane hardware needs no mapping */
-static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_in_reg(struct uart_port *p, int offset)
 {
-	if (up->port.iotype != UPIO_AU)
+	if (p->iotype != UPIO_AU)
 		return offset;
 	return au_io_in_map[offset];
 }
 
-static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_out_reg(struct uart_port *p, int offset)
 {
-	if (up->port.iotype != UPIO_AU)
+	if (p->iotype != UPIO_AU)
 		return offset;
 	return au_io_out_map[offset];
 }
@@ -326,16 +326,16 @@ static const u8
 		[UART_SCR]	= 0x2c
 	};
 
-static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_in_reg(struct uart_port *p, int offset)
 {
-	if (up->port.iotype != UPIO_RM9000)
+	if (p->iotype != UPIO_RM9000)
 		return offset;
 	return regmap_in[offset];
 }
 
-static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
+static inline int map_8250_out_reg(struct uart_port *p, int offset)
 {
-	if (up->port.iotype != UPIO_RM9000)
+	if (p->iotype != UPIO_RM9000)
 		return offset;
 	return regmap_out[offset];
 }
@@ -348,108 +348,170 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
 
 #endif
 
-static unsigned int serial_in(struct uart_8250_port *up, int offset)
+static unsigned int hub6_serial_in_fn(struct uart_port *p, int offset)
 {
-	unsigned int tmp;
-	offset = map_8250_in_reg(up, offset) << up->port.regshift;
+	offset = map_8250_in_reg(p, offset) << p->regshift;
+	outb(p->hub6 - 1 + offset, p->iobase);
+	return inb(p->iobase + 1);
+}
 
-	switch (up->port.iotype) {
-	case UPIO_HUB6:
-		outb(up->port.hub6 - 1 + offset, up->port.iobase);
-		return inb(up->port.iobase + 1);
+static void hub6_serial_out_fn(struct uart_port *p, int offset, int value)
+{
+	offset = map_8250_out_reg(p, offset) << p->regshift;
+	outb(p->hub6 - 1 + offset, p->iobase);
+	outb(value, p->iobase + 1);
+}
 
-	case UPIO_MEM:
-	case UPIO_DWAPB:
-		return readb(up->port.membase + offset);
+static unsigned int mem_serial_in_fn(struct uart_port *p, int offset)
+{
+	offset = map_8250_in_reg(p, offset) << p->regshift;
+	return readb(p->membase + offset);
+}
 
-	case UPIO_RM9000:
-	case UPIO_MEM32:
-		return readl(up->port.membase + offset);
+static void mem_serial_out_fn(struct uart_port *p, int offset, int value)
+{
+	offset = map_8250_out_reg(p, offset) << p->regshift;
+	writeb(value, p->membase + offset);
+}
+
+static void mem32_serial_out_fn(struct uart_port *p, int offset, int value)
+{
+	offset = map_8250_out_reg(p, offset) << p->regshift;
+	writel(value, p->membase + offset);
+}
+
+static unsigned int mem32_serial_in_fn(struct uart_port *p, int offset)
+{
+	offset = map_8250_in_reg(p, offset) << p->regshift;
+	return readl(p->membase + offset);
+}
 
 #ifdef CONFIG_SERIAL_8250_AU1X00
-	case UPIO_AU:
-		return __raw_readl(up->port.membase + offset);
+static unsigned int au_serial_in_fn(struct uart_port *p, int offset)
+{
+	offset = map_8250_in_reg(p, offset) << p->regshift;
+	return __raw_readl(p->membase + offset);
+}
+
+static void au_serial_out_fn(struct uart_port *p, int offset, int value)
+{
+	offset = map_8250_out_reg(p, offset) << p->regshift;
+	__raw_writel(value, p->membase + offset);
+}
 #endif
 
-	case UPIO_TSI:
-		if (offset == UART_IIR) {
-			tmp = readl(up->port.membase + (UART_IIR & ~3));
-			return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
-		} else
-			return readb(up->port.membase + offset);
+static unsigned int tsi_serial_in_fn(struct uart_port *p, int offset)
+{
+	unsigned int tmp;
+	offset = map_8250_in_reg(p, offset) << p->regshift;
+	if (offset == UART_IIR) {
+		tmp = readl(p->membase + (UART_IIR & ~3));
+		return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
+	} else
+		return readb(p->membase + offset);
+}
 
-	default:
-		return inb(up->port.iobase + offset);
-	}
+static void tsi_serial_out_fn(struct uart_port *p, int offset, int value)
+{
+	offset = map_8250_out_reg(p, offset) << p->regshift;
+	if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+		writeb(value, p->membase + offset);
 }
 
-static void
-serial_out(struct uart_8250_port *up, int offset, int value)
+static void dwapb_serial_out_fn(struct uart_port *p, int offset, int value)
 {
-	/* Save the offset before it's remapped */
 	int save_offset = offset;
-	offset = map_8250_out_reg(up, offset) << up->port.regshift;
+	offset = map_8250_out_reg(p, offset) << p->regshift;
+	/* Save the LCR value so it can be re-written when a
+	 * Busy Detect interrupt occurs. */
+	if (save_offset == UART_LCR) {
+		struct uart_8250_port *up = (struct uart_8250_port *)p;
+		up->lcr = value;
+	}
+	writeb(value, p->membase + offset);
+	/* Read the IER to ensure any interrupt is cleared before
+	 * returning from ISR. */
+	if (save_offset == UART_TX || save_offset == UART_IER)
+		value = p->serial_in_fn(p, UART_IER);
+}
 
-	switch (up->port.iotype) {
+static unsigned int io_serial_in_fn(struct uart_port *p, int offset)
+{
+	offset = map_8250_in_reg(p, offset) << p->regshift;
+	return inb(p->iobase + offset);
+}
+
+static void io_serial_out_fn(struct uart_port *p, int offset, int value)
+{
+	offset = map_8250_out_reg(p, offset) << p->regshift;
+	outb(value, p->iobase + offset);
+}
+
+static void set_io_fns_from_upio(struct uart_port *p)
+{
+	switch (p->iotype) {
 	case UPIO_HUB6:
-		outb(up->port.hub6 - 1 + offset, up->port.iobase);
-		outb(value, up->port.iobase + 1);
+		p->serial_in_fn = hub6_serial_in_fn;
+		p->serial_out_fn = hub6_serial_out_fn;
 		break;
 
 	case UPIO_MEM:
-		writeb(value, up->port.membase + offset);
+		p->serial_in_fn = mem_serial_in_fn;
+		p->serial_out_fn = mem_serial_out_fn;
 		break;
 
 	case UPIO_RM9000:
 	case UPIO_MEM32:
-		writel(value, up->port.membase + offset);
+		p->serial_in_fn = mem32_serial_in_fn;
+		p->serial_out_fn = mem32_serial_out_fn;
 		break;
 
 #ifdef CONFIG_SERIAL_8250_AU1X00
 	case UPIO_AU:
-		__raw_writel(value, up->port.membase + offset);
+		p->serial_in_fn = au_serial_in_fn;
+		p->serial_out_fn = au_serial_out_fn;
 		break;
 #endif
 	case UPIO_TSI:
-		if (!((offset == UART_IER) && (value & UART_IER_UUE)))
-			writeb(value, up->port.membase + offset);
+		p->serial_in_fn = tsi_serial_in_fn;
+		p->serial_out_fn = tsi_serial_out_fn;
 		break;
 
 	case UPIO_DWAPB:
-		/* Save the LCR value so it can be re-written when a
-		 * Busy Detect interrupt occurs. */
-		if (save_offset == UART_LCR)
-			up->lcr = value;
-		writeb(value, up->port.membase + offset);
-		/* Read the IER to ensure any interrupt is cleared before
-		 * returning from ISR. */
-		if (save_offset == UART_TX || save_offset == UART_IER)
-			value = serial_in(up, UART_IER);
+		p->serial_in_fn = mem_serial_in_fn;
+		p->serial_out_fn = dwapb_serial_out_fn;
 		break;
 
 	default:
-		outb(value, up->port.iobase + offset);
+		p->serial_in_fn = io_serial_in_fn;
+		p->serial_out_fn = io_serial_out_fn;
+		break;
 	}
 }
 
 static void
 serial_out_sync(struct uart_8250_port *up, int offset, int value)
 {
-	switch (up->port.iotype) {
+	struct uart_port *p = &up->port;
+	switch (p->iotype) {
 	case UPIO_MEM:
 	case UPIO_MEM32:
 #ifdef CONFIG_SERIAL_8250_AU1X00
 	case UPIO_AU:
 #endif
 	case UPIO_DWAPB:
-		serial_out(up, offset, value);
-		serial_in(up, UART_LCR);	/* safe, no side-effects */
+		p->serial_out_fn(p, offset, value);
+		p->serial_in_fn(p, UART_LCR);	/* safe, no side-effects */
 		break;
 	default:
-		serial_out(up, offset, value);
+		p->serial_out_fn(p, offset, value);
 	}
 }
 
+#define serial_in(up, offset)		\
+	(up->port.serial_in_fn(&(up)->port, (offset)))
+#define serial_out(up, offset, value)	\
+	(up->port.serial_out_fn(&(up)->port, (offset), (value)))
 /*
  * We used to support using pause I/O for certain machines.  We
  * haven't supported this for a while, but just in case it's badly
@@ -2511,6 +2573,7 @@ static void __init serial8250_isa_init_ports(void)
 		up->port.membase  = old_serial_port[i].iomem_base;
 		up->port.iotype   = old_serial_port[i].io_type;
 		up->port.regshift = old_serial_port[i].iomem_reg_shift;
+		set_io_fns_from_upio(&up->port);
 		if (share_irqs)
 			up->port.flags |= UPF_SHARE_IRQ;
 	}
@@ -2912,6 +2975,12 @@ int serial8250_register_port(struct uart_port *port)
 		uart->port.private_data = port->private_data;
 		if (port->dev)
 			uart->port.dev = port->dev;
+		set_io_fns_from_upio(&uart->port);
+		/* Possibly override default I/O functions.  */
+		if (port->serial_in_fn)
+			uart->port.serial_in_fn = port->serial_in_fn;
+		if (port->serial_out_fn)
+			uart->port.serial_out_fn = port->serial_out_fn;
 
 		ret = uart_add_one_port(&serial8250_reg, &uart->port);
 		if (ret == 0)
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 3d37c94..eb08b04 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -28,6 +28,8 @@ struct plat_serial8250_port {
 	unsigned char	iotype;		/* UPIO_* */
 	unsigned char	hub6;
 	upf_t		flags;		/* UPF_* flags */
+	unsigned int	(*serial_in_fn)(struct uart_port *, int);
+	void		(*serial_out_fn)(struct uart_port *, int, int);
 };
 
 /*
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 3b2f6c0..3a4afcf 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -243,6 +243,8 @@ struct uart_port {
 	spinlock_t		lock;			/* port lock */
 	unsigned int		iobase;			/* in/out[bwl] */
 	unsigned char __iomem	*membase;		/* read/write[bwl] */
+	unsigned int		(*serial_in_fn)(struct uart_port *, int);
+	void			(*serial_out_fn)(struct uart_port *, int, int);
 	unsigned int		irq;			/* irq number */
 	unsigned int		uartclk;		/* base uart clock */
 	unsigned int		fifosize;		/* tx fifo size */

Re: [PATCH 1/4] serial: 8250 driver replaceable i/o functions.

[H. Peter Anvin]

David Daney wrote:
> /* sane hardware needs no mapping */
> -static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
> +static inline int map_8250_in_reg(struct uart_port *p, int offset)
> {
> -    if (up->port.iotype != UPIO_AU)
> +    if (p->iotype != UPIO_AU)
>         return offset;
>     return au_io_in_map[offset];
> }

With your changes, these functions cannot be called with p->iotype != 
UPIO_AU anymore, correct?  So there is no need for this test...

	-hpa

Re: [PATCH 1/4] serial: 8250 driver replaceable i/o functions.

[David Daney]

H. Peter Anvin wrote:
> David Daney wrote:
>> /* sane hardware needs no mapping */
>> -static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
>> +static inline int map_8250_in_reg(struct uart_port *p, int offset)
>> {
>> -    if (up->port.iotype != UPIO_AU)
>> +    if (p->iotype != UPIO_AU)
>>         return offset;
>>     return au_io_in_map[offset];
>> }
> 
> With your changes, these functions cannot be called with p->iotype != 
> UPIO_AU anymore, correct?  So there is no need for this test...
> 

I think you are probably correct.  However, with the patch it is 
possible to move all this target specific code out of the driver.  So if 
the patch is accepted, a better follow up would be to get rid of the 
UPIO_AU things altogether.

I gave an example of how that could be done with UPIO_TSI here:

http://marc.info/?l=linux-serial&m=122333633802691&w=2

David Daney

[PATCH 2/4] serial: Allow port type to be specified when calling serial8250_register_port.

[David Daney]

Allow port type to be specified when calling serial8250_register_port.

Add flag value UPF_FIXED_TYPE which specifies that the UART type is
known and should not be probed.  For this case the UARTs properties
are just copied out of the uart_config entry.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
---
 drivers/serial/8250.c        |    8 ++++++++
 drivers/serial/serial_core.c |    7 +++++--
 include/linux/serial_core.h  |    2 ++
 3 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 02771d6..c575b61 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2975,6 +2975,14 @@ int serial8250_register_port(struct uart_port *port)
 		uart->port.private_data = port->private_data;
 		if (port->dev)
 			uart->port.dev = port->dev;
+
+		if (port->flags & UPF_FIXED_TYPE) {
+			uart->port.type = port->type;
+			uart->port.fifosize = uart_config[port->type].fifo_size;
+			uart->capabilities = uart_config[port->type].flags;
+			uart->tx_loadsz = uart_config[port->type].tx_loadsz;
+		}
+
 		set_io_fns_from_upio(&uart->port);
 		/* Possibly override default I/O functions.  */
 		if (port->serial_in_fn)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index f977c98..65b8a74 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2196,11 +2196,14 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 	 * Now do the auto configuration stuff.  Note that config_port
 	 * is expected to claim the resources and map the port for us.
 	 */
-	flags = UART_CONFIG_TYPE;
+	flags = 0;
 	if (port->flags & UPF_AUTO_IRQ)
 		flags |= UART_CONFIG_IRQ;
 	if (port->flags & UPF_BOOT_AUTOCONF) {
-		port->type = PORT_UNKNOWN;
+		if (!(port->flags & UPF_FIXED_TYPE)) {
+			port->type = PORT_UNKNOWN;
+			flags |= UART_CONFIG_TYPE;
+		}
 		port->ops->config_port(port, flags);
 	}
 
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 3a4afcf..c68dc94 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -290,6 +290,8 @@ struct uart_port {
 #define UPF_MAGIC_MULTIPLIER	((__force upf_t) (1 << 16))
 #define UPF_CONS_FLOW		((__force upf_t) (1 << 23))
 #define UPF_SHARE_IRQ		((__force upf_t) (1 << 24))
+/* The exact UART type is known and should not be probed.  */
+#define UPF_FIXED_TYPE		((__force upf_t) (1 << 27))
 #define UPF_BOOT_AUTOCONF	((__force upf_t) (1 << 28))
 #define UPF_FIXED_PORT		((__force upf_t) (1 << 29))
 #define UPF_DEAD		((__force upf_t) (1 << 30))

[PATCH 3/4] serial: Allow port type to specify bugs that are not probed for.

[David Daney]

Allow port type to specify bugs that are not probed for.

Add a bugs field to the serial8250_config and propagate it to the
port's bugs field when the port is registered and configured.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
---
 drivers/serial/8250.c |    2 ++
 drivers/serial/8250.h |    1 +
 2 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index c575b61..19a8373 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1197,6 +1197,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	up->port.fifosize = uart_config[up->port.type].fifo_size;
 	up->capabilities = uart_config[up->port.type].flags;
 	up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
+	up->bugs |= uart_config[up->port.type].bugs;
 
 	if (up->port.type == PORT_UNKNOWN)
 		goto out;
@@ -2981,6 +2982,7 @@ int serial8250_register_port(struct uart_port *port)
 			uart->port.fifosize = uart_config[port->type].fifo_size;
 			uart->capabilities = uart_config[port->type].flags;
 			uart->tx_loadsz = uart_config[port->type].tx_loadsz;
+			uart->bugs = uart_config[port->type].bugs;
 		}
 
 		set_io_fns_from_upio(&uart->port);
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 5202603..c9b3002 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -34,6 +34,7 @@ struct serial8250_config {
 	const char	*name;
 	unsigned short	fifo_size;
 	unsigned short	tx_loadsz;
+	unsigned short	bugs;
 	unsigned char	fcr;
 	unsigned int	flags;
 };

[PATCH 4/4] serial: Add new uart_config for PORT_OCTEON

[David Daney]

Cavium UART implementation won't work with the standard 8250 driver
as-is.  Define a new uart_config (PORT_OCTEON) and use it to enable
special handling required by the OCTEON's serial port.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
---
 drivers/serial/8250.c       |   16 +++++++++++++++-
 drivers/serial/8250.h       |    2 ++
 include/linux/serial_core.h |    3 ++-
 include/linux/serial_reg.h  |    6 ++++++
 4 files changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 19a8373..7afd07f 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -264,6 +264,14 @@ static const struct serial8250_config uart_config[] = {
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_OCTEON] = {
+		.name		= "OCTEON",
+		.fifo_size	= 64,
+		.tx_loadsz	= 64,
+		.bugs		= UART_BUG_TIMEOUT | UART_BUG_OCTEON_IIR,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 #if defined (CONFIG_SERIAL_8250_AU1X00)
@@ -1540,6 +1548,12 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
 		up = list_entry(l, struct uart_8250_port, list);
 
 		iir = serial_in(up, UART_IIR);
+		if ((up->bugs & UART_BUG_OCTEON_IIR) && (iir & 0xf) == 7) {
+			/* Busy interrupt */
+			serial_in(up, UART_OCTEON_USR);
+			iir = serial_in(up, UART_IIR);
+		}
+
 		if (!(iir & UART_IIR_NO_INT)) {
 			serial8250_handle_port(up);
 
@@ -1658,7 +1672,7 @@ static void serial8250_timeout(unsigned long data)
 	unsigned int iir;
 
 	iir = serial_in(up, UART_IIR);
-	if (!(iir & UART_IIR_NO_INT))
+	if (!(iir & UART_IIR_NO_INT) || (up->bugs & UART_BUG_TIMEOUT))
 		serial8250_handle_port(up);
 	mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
 }
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index c9b3002..56b3cb7 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -49,6 +49,8 @@ struct serial8250_config {
 #define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
 #define UART_BUG_NOMSR	(1 << 2)	/* UART has buggy MSR status bits (Au1x00) */
 #define UART_BUG_THRE	(1 << 3)	/* UART has buggy THRE reassertion */
+#define UART_BUG_TIMEOUT (1 << 4)	/* UART should always handle timeout */
+#define UART_BUG_OCTEON_IIR (1 << 5)	/* UART OCTEON IIR workaround */
 
 #define PROBE_RSA	(1 << 0)
 #define PROBE_ANY	(~0)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index c68dc94..c920c43 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -40,7 +40,8 @@
 #define PORT_NS16550A	14
 #define PORT_XSCALE	15
 #define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
-#define PORT_MAX_8250	16	/* max port ID */
+#define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
+#define PORT_MAX_8250	17	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 96c0d93..a96bd50 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -324,5 +324,11 @@
 #define UART_OMAP_SYSC		0x15	/* System configuration register */
 #define UART_OMAP_SYSS		0x16	/* System status register */
 
+/*
+ * Extra serial register definitions for the internal UARTs in Cavium
+ * Networks OCTEON processors.
+ */
+#define UART_OCTEON_USR		0x27	/* UART Status Register */
+
 #endif /* _LINUX_SERIAL_REG_H */