From: Tamas Szklenar <tszklenar@cfa.harvard.edu>
To: linux-serial@vger.kernel.org
Subject: LAVA PCIe serial card problem
Date: Mon, 21 Feb 2011 18:30:27 -0500 [thread overview]
Message-ID: <4D62F593.4010103@cfa.harvard.edu> (raw)
Hi,
We bought two PCIe serial cards from LAVA, one dual and one quad port card.
My problem is that the devices are visible in lspci, but no module is
loaded to the cards. I have other PCI card from this manufacturer and
they are working well and the necessary module is loaded fine.
Our linux is using the 2.6.35.7 kernel version.
Could you help me to fix these card?
I attached the output of the dmesg and the lspci to my mail.
Thank you very much!
Tamas
===============================
===============================
Here is the output of the lspci -vv:
07:00.0 Serial controller: NetMos Technology PCIe 9901 Multi-I/O
Controller (prog-if 02 [16550])
Subsystem: Lava Computer mfg Inc Device 0104
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 8f00 [size=8]
Region 1: Memory at fd6ff000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fd6fe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+
AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Power Budgeting <?>
Capabilities: [200 v1] Device Serial Number 88-99-ff-ee-dd-cc-bb-aa
07:00.1 Serial controller: NetMos Technology PCIe 9901 Multi-I/O
Controller (prog-if 02 [16550])
Subsystem: Lava Computer mfg Inc Device 0105
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 8e00 [size=8]
Region 1: Memory at fd6fd000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fd6fc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+
AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
===============================
This is the output of the dmesg:
[ 6.249634] serial 0000:08:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 6.249641] serial 0000:08:00.0: PCI INT A disabled
[ 6.249654] serial 0000:08:00.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 6.249659] serial 0000:08:00.1: PCI INT B disabled
[ 6.249671] serial 0000:08:00.2: PCI INT C -> GSI 17 (level, low) ->
IRQ 17
[ 6.249676] serial 0000:08:00.2: PCI INT C disabled
[ 6.249687] serial 0000:08:00.3: PCI INT D -> GSI 17 (level, low) ->
IRQ 17
[ 6.249692] serial 0000:08:00.3: PCI INT D disabled
next reply other threads:[~2011-02-22 0:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-21 23:30 Tamas Szklenar [this message]
2011-02-22 22:05 ` LAVA PCIe serial card problem Greg KH
2011-02-22 22:15 ` Tamas Szklenar
2011-03-10 19:33 ` Tamas Szklenar
2011-03-10 19:48 ` Greg KH
2011-03-10 20:08 ` Tamas Szklenar
2011-03-10 20:16 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D62F593.4010103@cfa.harvard.edu \
--to=tszklenar@cfa.harvard.edu \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).