SC16is752 I2c driver

SC16is752 I2c driver

[Pete Murray]

Hello,

I wrote an I2C  driver for the SC16is752 dual Uart chip, I see there is 
an SPI version now.  There was no SPI version when I was developing, if 
there was I would have tried to add I2C support to that driver instead.  
Is this something I should post for review, or should I work on adding 
support to the existing SPI version? 

Thanks
Pete

Re: SC16is752 I2c driver

[Greg KH]

On Tue, Feb 22, 2011 at 09:28:26AM -0500, Pete Murray wrote:
> Hello,
> 
> I wrote an I2C  driver for the SC16is752 dual Uart chip, I see there
> is an SPI version now.  There was no SPI version when I was
> developing, if there was I would have tried to add I2C support to
> that driver instead.  Is this something I should post for review, or
> should I work on adding support to the existing SPI version?

Try adding support to the SPI version, it might be simpler.

thanks,

greg k-h

Re: SC16is752 I2c driver

[Thomas Weber]

Hello Manuel,

Am 22.02.2011 15:28, schrieb Pete Murray:
> Hello,
> 
> I wrote an I2C  driver for the SC16is752 dual Uart chip, I see there is
> an SPI version now.  There was no SPI version when I was developing, if
> there was I would have tried to add I2C support to that driver instead. 
> Is this something I should post for review, or should I work on adding
> support to the existing SPI version?
> Thanks
> Pete
> 

do you have an updated version of your SC16IS752 driver, so that Pete
can add his I2C part?


Regards,
Thomas

Re: SC16is752 I2c driver

[Manuel Stahl]

On 23.02.2011 08:31, Thomas Weber wrote:
> Hello Manuel,
>
> Am 22.02.2011 15:28, schrieb Pete Murray:
>> Hello,
>>
>> I wrote an I2C  driver for the SC16is752 dual Uart chip, I see there is
>> an SPI version now.  There was no SPI version when I was developing, if
>> there was I would have tried to add I2C support to that driver instead.
>> Is this something I should post for review, or should I work on adding
>> support to the existing SPI version?
>> Thanks
>> Pete
>>
>
> do you have an updated version of your SC16IS752 driver, so that Pete
> can add his I2C part?

My latest version is the one from 7th February 2011 that was posted on 
linux-serial.

Regards,
-- 
Manuel Stahl
Fraunhofer-Institut IIS
Leistungsoptimierte Systeme

Nordostpark 93
D90411 Nürnberg
Telefon  +49 (0)911/58061-6419
Fax      +49 (0)911/58061-6398
E-Mail   manuel.stahl@iis.fraunhofer.de

http://www.iis.fraunhofer.de
http://www.smart-power.fraunhofer.de
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html