* LAVA PCIe serial card problem
@ 2011-02-21 23:30 Tamas Szklenar
2011-02-22 22:05 ` Greg KH
0 siblings, 1 reply; 7+ messages in thread
From: Tamas Szklenar @ 2011-02-21 23:30 UTC (permalink / raw)
To: linux-serial
Hi,
We bought two PCIe serial cards from LAVA, one dual and one quad port card.
My problem is that the devices are visible in lspci, but no module is
loaded to the cards. I have other PCI card from this manufacturer and
they are working well and the necessary module is loaded fine.
Our linux is using the 2.6.35.7 kernel version.
Could you help me to fix these card?
I attached the output of the dmesg and the lspci to my mail.
Thank you very much!
Tamas
===============================
===============================
Here is the output of the lspci -vv:
07:00.0 Serial controller: NetMos Technology PCIe 9901 Multi-I/O
Controller (prog-if 02 [16550])
Subsystem: Lava Computer mfg Inc Device 0104
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 8f00 [size=8]
Region 1: Memory at fd6ff000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fd6fe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+
AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Power Budgeting <?>
Capabilities: [200 v1] Device Serial Number 88-99-ff-ee-dd-cc-bb-aa
07:00.1 Serial controller: NetMos Technology PCIe 9901 Multi-I/O
Controller (prog-if 02 [16550])
Subsystem: Lava Computer mfg Inc Device 0105
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 8e00 [size=8]
Region 1: Memory at fd6fd000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fd6fc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+
AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
===============================
This is the output of the dmesg:
[ 6.249634] serial 0000:08:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 6.249641] serial 0000:08:00.0: PCI INT A disabled
[ 6.249654] serial 0000:08:00.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 6.249659] serial 0000:08:00.1: PCI INT B disabled
[ 6.249671] serial 0000:08:00.2: PCI INT C -> GSI 17 (level, low) ->
IRQ 17
[ 6.249676] serial 0000:08:00.2: PCI INT C disabled
[ 6.249687] serial 0000:08:00.3: PCI INT D -> GSI 17 (level, low) ->
IRQ 17
[ 6.249692] serial 0000:08:00.3: PCI INT D disabled
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: LAVA PCIe serial card problem
2011-02-21 23:30 LAVA PCIe serial card problem Tamas Szklenar
@ 2011-02-22 22:05 ` Greg KH
2011-02-22 22:15 ` Tamas Szklenar
2011-03-10 19:33 ` Tamas Szklenar
0 siblings, 2 replies; 7+ messages in thread
From: Greg KH @ 2011-02-22 22:05 UTC (permalink / raw)
To: Tamas Szklenar; +Cc: linux-serial
On Mon, Feb 21, 2011 at 06:30:27PM -0500, Tamas Szklenar wrote:
> Hi,
>
> We bought two PCIe serial cards from LAVA, one dual and one quad port card.
>
> My problem is that the devices are visible in lspci, but no module
> is loaded to the cards. I have other PCI card from this manufacturer
> and they are working well and the necessary module is loaded fine.
>
> Our linux is using the 2.6.35.7 kernel version.
>
> Could you help me to fix these card?
>
> I attached the output of the dmesg and the lspci to my mail.
What driver attached to the other cards that work properly for you?
Have you tried adding the device id for your new card to the "new_ids"
file for this driver and seeing if that worked properly or not?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: LAVA PCIe serial card problem
2011-02-22 22:05 ` Greg KH
@ 2011-02-22 22:15 ` Tamas Szklenar
2011-03-10 19:33 ` Tamas Szklenar
1 sibling, 0 replies; 7+ messages in thread
From: Tamas Szklenar @ 2011-02-22 22:15 UTC (permalink / raw)
To: Greg KH; +Cc: linux-serial
Hi Greg,
Thanks for reply.
I attached no special driver to the other cards, only the kernels self
"serial" driver.
I checked the 'include/linux/pci_ids.h' and the
'drivers/serial/8250_pci.c' for the support and our new pcie serial
cards are already in this.
Thanks,
Tamas
> On Mon, Feb 21, 2011 at 06:30:27PM -0500, Tamas Szklenar wrote:
>> Hi,
>>
>> We bought two PCIe serial cards from LAVA, one dual and one quad port card.
>>
>> My problem is that the devices are visible in lspci, but no module
>> is loaded to the cards. I have other PCI card from this manufacturer
>> and they are working well and the necessary module is loaded fine.
>>
>> Our linux is using the 2.6.35.7 kernel version.
>>
>> Could you help me to fix these card?
>>
>> I attached the output of the dmesg and the lspci to my mail.
> What driver attached to the other cards that work properly for you?
> Have you tried adding the device id for your new card to the "new_ids"
> file for this driver and seeing if that worked properly or not?
>
> thanks,
>
> greg k-h
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: LAVA PCIe serial card problem
2011-02-22 22:05 ` Greg KH
2011-02-22 22:15 ` Tamas Szklenar
@ 2011-03-10 19:33 ` Tamas Szklenar
2011-03-10 19:48 ` Greg KH
1 sibling, 1 reply; 7+ messages in thread
From: Tamas Szklenar @ 2011-03-10 19:33 UTC (permalink / raw)
To: Greg KH; +Cc: linux-serial
Dear Greg (and the other serial pros),
I had a question about a pcie single and dual serial card before, please
send me a mail back with the needed things (logs, config files, etc) and
I will collect every information to help solve this problem.
Thanks,
Tamas
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: LAVA PCIe serial card problem
2011-03-10 19:33 ` Tamas Szklenar
@ 2011-03-10 19:48 ` Greg KH
2011-03-10 20:08 ` Tamas Szklenar
0 siblings, 1 reply; 7+ messages in thread
From: Greg KH @ 2011-03-10 19:48 UTC (permalink / raw)
To: Tamas Szklenar; +Cc: linux-serial
On Thu, Mar 10, 2011 at 02:33:30PM -0500, Tamas Szklenar wrote:
> Dear Greg (and the other serial pros),
>
> I had a question about a pcie single and dual serial card before,
> please send me a mail back with the needed things (logs, config
> files, etc) and I will collect every information to help solve this
> problem.
I don't know, as I don't recall the problem, sorry. Try repeating it,
and include the information you think would help.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: LAVA PCIe serial card problem
2011-03-10 19:48 ` Greg KH
@ 2011-03-10 20:08 ` Tamas Szklenar
2011-03-10 20:16 ` Greg KH
0 siblings, 1 reply; 7+ messages in thread
From: Tamas Szklenar @ 2011-03-10 20:08 UTC (permalink / raw)
To: Greg KH; +Cc: linux-serial
Dear Greg,
This was my original message:
We bought two PCIe serial cards from LAVA, one dual and one quad port card.
My problem is that the devices are visible in lspci, but no module is
loaded to the cards. I have other PCI card from this manufacturer and
they are working well and the necessary module is loaded fine. I can't
use these cards because of this problem.
Our linux is using the 2.6.35.7 kernel version. I checked the source
code and the cards are already there in the necessary c files.
Could you help me to fix these card?
I attached the output of the dmesg and the lspci to my mail.
Thank you very much!
Tamas
===============================
===============================
Here is the output of the lspci -vv:
07:00.0 Serial controller: NetMos Technology PCIe 9901 Multi-I/O
Controller (prog-if 02 [16550])
Subsystem: Lava Computer mfg Inc Device 0104
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 8f00 [size=8]
Region 1: Memory at fd6ff000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fd6fe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+
AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Power Budgeting <?>
Capabilities: [200 v1] Device Serial Number 88-99-ff-ee-dd-cc-bb-aa
07:00.1 Serial controller: NetMos Technology PCIe 9901 Multi-I/O
Controller (prog-if 02 [16550])
Subsystem: Lava Computer mfg Inc Device 0105
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 8e00 [size=8]
Region 1: Memory at fd6fd000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fd6fc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+
AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
===============================
This is the output of the dmesg:
[ 6.249634] serial 0000:08:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 6.249641] serial 0000:08:00.0: PCI INT A disabled
[ 6.249654] serial 0000:08:00.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 6.249659] serial 0000:08:00.1: PCI INT B disabled
[ 6.249671] serial 0000:08:00.2: PCI INT C -> GSI 17 (level, low) ->
IRQ 17
[ 6.249676] serial 0000:08:00.2: PCI INT C disabled
[ 6.249687] serial 0000:08:00.3: PCI INT D -> GSI 17 (level, low) ->
IRQ 17
[ 6.249692] serial 0000:08:00.3: PCI INT D disabled
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: LAVA PCIe serial card problem
2011-03-10 20:08 ` Tamas Szklenar
@ 2011-03-10 20:16 ` Greg KH
0 siblings, 0 replies; 7+ messages in thread
From: Greg KH @ 2011-03-10 20:16 UTC (permalink / raw)
To: Tamas Szklenar; +Cc: linux-serial
On Thu, Mar 10, 2011 at 03:08:35PM -0500, Tamas Szklenar wrote:
> Dear Greg,
>
> This was my original message:
>
> We bought two PCIe serial cards from LAVA, one dual and one quad port card.
>
> My problem is that the devices are visible in lspci, but no module
> is loaded to the cards. I have other PCI card from this manufacturer
> and they are working well and the necessary module is loaded fine. I
> can't use these cards because of this problem.
>
> Our linux is using the 2.6.35.7 kernel version. I checked the source
> code and the cards are already there in the necessary c files.
If the device ids are in the driver for this device, are you sure the
driver is loaded?
What driver should be controlling it?
>
> Could you help me to fix these card?
>
> I attached the output of the dmesg and the lspci to my mail.
>
> Thank you very much!
>
>
> Tamas
>
> ===============================
> ===============================
>
> Here is the output of the lspci -vv:
>
> 07:00.0 Serial controller: NetMos Technology PCIe 9901 Multi-I/O
> Controller (prog-if 02 [16550])
> Subsystem: Lava Computer mfg Inc Device 0104
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 17
> Region 0: I/O ports at 8f00 [size=8]
> Region 1: Memory at fd6ff000 (32-bit, non-prefetchable) [size=4K]
> Region 4: Memory at fd6fe000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [80] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency
> L0s <64ns, L1 <1us
> ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal-
> Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+
> AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s
> L1, Latency L0 unlimited, L1 unlimited
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled-
> Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Power Budgeting <?>
> Capabilities: [200 v1] Device Serial Number 88-99-ff-ee-dd-cc-bb-aa
>
> 07:00.1 Serial controller: NetMos Technology PCIe 9901 Multi-I/O
> Controller (prog-if 02 [16550])
> Subsystem: Lava Computer mfg Inc Device 0105
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 17
> Region 0: I/O ports at 8e00 [size=8]
> Region 1: Memory at fd6fd000 (32-bit, non-prefetchable) [size=4K]
> Region 4: Memory at fd6fc000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [80] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency
> L0s <64ns, L1 <1us
> ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal-
> Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+
> AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s
> L1, Latency L0 unlimited, L1 unlimited
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled-
> Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>
> ===============================
>
> This is the output of the dmesg:
>
> [ 6.249634] serial 0000:08:00.0: PCI INT A -> GSI 17 (level, low)
> -> IRQ 17
> [ 6.249641] serial 0000:08:00.0: PCI INT A disabled
> [ 6.249654] serial 0000:08:00.1: PCI INT B -> GSI 17 (level, low)
> -> IRQ 17
> [ 6.249659] serial 0000:08:00.1: PCI INT B disabled
> [ 6.249671] serial 0000:08:00.2: PCI INT C -> GSI 17 (level, low)
> -> IRQ 17
> [ 6.249676] serial 0000:08:00.2: PCI INT C disabled
> [ 6.249687] serial 0000:08:00.3: PCI INT D -> GSI 17 (level, low)
> -> IRQ 17
> [ 6.249692] serial 0000:08:00.3: PCI INT D disabled
This doesn't look like your PCI devices above, as the pci device bus
numbers don't match.
Can you provide the output of:
lspci -n
lspci
lspci -k
for us?
as well as the full boot log?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-03-10 20:18 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-21 23:30 LAVA PCIe serial card problem Tamas Szklenar
2011-02-22 22:05 ` Greg KH
2011-02-22 22:15 ` Tamas Szklenar
2011-03-10 19:33 ` Tamas Szklenar
2011-03-10 19:48 ` Greg KH
2011-03-10 20:08 ` Tamas Szklenar
2011-03-10 20:16 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).