From mboxrd@z Thu Jan 1 00:00:00 1970 From: Richard Genoud Subject: Re: [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib Date: Fri, 31 Jan 2014 16:04:36 +0100 Message-ID: <52EBBB84.9050705@gmail.com> References: <1383816355-2956-1-git-send-email-linus.walleij@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-gpio-owner@vger.kernel.org To: Linus Walleij Cc: "arm@kernel.org" , "linux-gpio@vger.kernel.org" , Alexandre Courbot , "linux-serial@vger.kernel.org" , Jean-Christophe Plagniol-Villard , Andrew Victor , "linux-arm-kernel@lists.infradead.org" List-Id: linux-serial@vger.kernel.org On 13/01/2014 14:39, Linus Walleij wrote: > On Thu, Nov 7, 2013 at 10:25 AM, Linus Walleij wrote: > >> This passes the errata fix using a GPIO to control the RTS pin >> on one of the AT91 chips to use gpiolib instead of the >> AT91-specific interfaces. Also remove the reliance on >> compile-time #defines and the cpu_* check and rely on the >> platform passing down the proper GPIO pin through platform >> data. >> >> This is a prerequisite for getting rid of the local GPIO >> implementation in the AT91 platform and move toward >> multiplatform. >> >> The patch also adds device tree support for getting the >> RTS GPIO pin from the device tree on DT boot paths. >> >> Signed-off-by: Nicolas Ferre >> Acked-by: Jean-Christophe PLAGNIOL-VILLARD >> Signed-off-by: Linus Walleij >> --- >> ChangeLog v3->v4: > > ARM SoC folks, if you're not taking this in through the removal > series then please ACK this patch so I can take it through the GPIO > tree instead (unless you want to apply this single patch, which would > be even better, you have Greg's ACK in this thread). > I can't find this patch in linux-next, did I missed something ?