From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Ruihong Luo <colorsu1922@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
linux-serial <linux-serial@vger.kernel.org>,
luoruihong@xiaomi.com, weipengliang@xiaomi.com,
wengjinfei@xiaomi.com
Subject: Re: [PATCH v3] serial: 8250_dw: Preserve original value of DLF register
Date: Wed, 12 Jul 2023 17:26:58 +0300 (EEST) [thread overview]
Message-ID: <763104-cf9a-5397-b45c-d288d7cbc899@linux.intel.com> (raw)
In-Reply-To: <20230630003806.66112-1-colorsu1922@gmail.com>
On Fri, 30 Jun 2023, Ruihong Luo wrote:
> Preserve the original value of the Divisor Latch Fraction (DLF) register.
> When the DLF register is modified without preservation, it can disrupt
> the baudrate settings established by firmware or bootloader, leading to
> data corruption and the generation of unreadable or distorted characters.
>
> Fixes: 701c5e73b296 ("serial: 8250_dw: add fractional divisor support")
Add also:
Cc: stable@vger.kernel.org
> Signed-off-by: Ruihong Luo <colorsu1922@gmail.com>
> ---
> v3:
> - modify the commit message
> - use personal email to sign
> drivers/tty/serial/8250/8250_dwlib.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
> index 75f32f054ebb..d30957722da8 100644
> --- a/drivers/tty/serial/8250/8250_dwlib.c
> +++ b/drivers/tty/serial/8250/8250_dwlib.c
> @@ -244,7 +244,7 @@ void dw8250_setup_port(struct uart_port *p)
> struct dw8250_port_data *pd = p->private_data;
> struct dw8250_data *data = to_dw8250_data(pd);
> struct uart_8250_port *up = up_to_u8250p(p);
> - u32 reg;
> + u32 reg, orig;
>
> pd->hw_rs485_support = dw8250_detect_rs485_hw(p);
> if (pd->hw_rs485_support) {
> @@ -270,9 +270,11 @@ void dw8250_setup_port(struct uart_port *p)
> dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
> (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
>
> + /* Preserve value written by firmware or bootloader */
> + orig = dw8250_readl_ext(p, DW_UART_DLF);
> dw8250_writel_ext(p, DW_UART_DLF, ~0U);
> reg = dw8250_readl_ext(p, DW_UART_DLF);
> - dw8250_writel_ext(p, DW_UART_DLF, 0);
> + dw8250_writel_ext(p, DW_UART_DLF, orig);
>
> if (reg) {
> pd->dlf_size = fls(reg);
The change looks good but I'd prefer the variable to be called old_dlf
which is inline how 8250_port names its variables does when it preserves a
registers across some auto-detection write.
--
i.
prev parent reply other threads:[~2023-07-12 14:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-30 0:38 [PATCH v3] serial: 8250_dw: Preserve original value of DLF register Ruihong Luo
2023-06-30 17:34 ` Andy Shevchenko
2023-07-12 14:26 ` Ilpo Järvinen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=763104-cf9a-5397-b45c-d288d7cbc899@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=colorsu1922@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=luoruihong@xiaomi.com \
--cc=weipengliang@xiaomi.com \
--cc=wengjinfei@xiaomi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).