Re: [PATCH v1 tty-next 2/2] 8250: microchip: pci1xxxx: Add power management functions to pci1xxxx's quad-uart driver.

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

On Tue, 30 Aug 2022, Kumaravel Thiagarajan wrote:

> pci1xxxx's quad-uart function has the capability to wake up the host from
> suspend state. Enable wakeup before entering into suspend and disable
> wakeup upon resume.
> 
> Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
> ---
>  drivers/tty/serial/8250/8250_pci1xxxx.c | 122 ++++++++++++++++++++++++
>  1 file changed, 122 insertions(+)
> 
> diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c
> index 56852ae0585e..38c2a6a9e5d5 100644
> --- a/drivers/tty/serial/8250/8250_pci1xxxx.c
> +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
> @@ -70,6 +70,7 @@
>  
>  #define UART_PCI_CTRL_REG		0x80
>  #define UART_PCI_CTRL_SET_MULTIPLE_MSI	BIT(4)
> +#define UART_PCI_CTRL_D3_CLK_ENABLE	BIT(0)

Reorder.

> +static char pci1xxxx_port_suspend(int line)

Why char???

> +{
> +	struct uart_8250_port *up = serial8250_get_port(line);
> +	struct uart_port *port = &up->port;
> +	unsigned long flags;
> +	u8 wakeup_mask;
> +	char ret = 0;
> +
> +	if (port->suspended == 0 && port->dev) {
> +		wakeup_mask = readb(up->port.membase + UART_WAKE_MASK_REG);
> +
> +		spin_lock_irqsave(&port->lock, flags);
> +		port->mctrl &= ~TIOCM_OUT2;
> +		port->ops->set_mctrl(port, port->mctrl);
> +		spin_unlock_irqrestore(&port->lock, flags);
> +
> +		if ((wakeup_mask & UART_WAKE_SRCS) != UART_WAKE_SRCS)
> +			ret = 0x01;
> +		else
> +			ret = 0x00;

Is it a bool or should you name these it with a #define?

> +	}
> +
> +	writeb(UART_WAKE_SRCS, port->membase + UART_WAKE_REG);
> +
> +	return ret;
> +}
> +
> +void pci1xxxx_port_resume(int line)
> +{
> +	struct uart_8250_port *up = serial8250_get_port(line);
> +	struct uart_port *port = &up->port;
> +	unsigned long flags;
> +
> +	writeb(UART_WAKE_SRCS, port->membase + UART_WAKE_REG);
> +
> +	if (port->suspended == 0) {
> +		spin_lock_irqsave(&port->lock, flags);
> +		port->mctrl |= TIOCM_OUT2;
> +		port->ops->set_mctrl(port, port->mctrl);
> +		spin_unlock_irqrestore(&port->lock, flags);
> +	}
> +}
> +
> +static int pci1xxxx_suspend(struct device *dev)
> +{
> +	struct pci1xxxx_8250 *priv = dev_get_drvdata(dev);
> +	struct pci_dev *pcidev = to_pci_dev(dev);
> +	unsigned int data;
> +	void __iomem *p;
> +	char wakeup = 0;
> +	int i;
> +
> +	for (i = 0; i < priv->nr; i++) {
> +		if (priv->line[i] >= 0) {
> +			serial8250_suspend_port(priv->line[i]);
> +			wakeup |= pci1xxxx_port_suspend(priv->line[i]);
> +		}
> +	}
> +
> +	p = pci_ioremap_bar(pcidev, 0);
> +	if (!p) {
> +		dev_err(dev, "remapping of bar 0 memory failed");
> +		return -ENOMEM;
> +	}
> +
> +	data = readl(p + UART_RESET_REG);
> +	writel(data | UART_RESET_D3_RESET_DISABLE, p + UART_RESET_REG);
> +
> +	if (wakeup)

It looks you'd want bool instead of char here.


-- 
 i.