Linux Serial subsystem development
 help / color / mirror / Atom feed
 messages from 2026-10-01 02:27:43 to 2026-10-05 10:50:27 UTC [more...]

[PATCH 00/20] arm64: add Synaptics SL261X SoCs and RDK boards
 2026-10-05 10:50 UTC  (7+ messages)
` [PATCH 08/20] dt-bindings: reset: add Synaptics SL261X SoCs

[PATCH v6 0/9] serial: max310x: RS485 delay and RTS fixes, software-timed delays
 2026-10-05 10:12 UTC  (20+ messages)
` [PATCH v6 1/9] serial: max310x: don't clobber the TX break bit in set_termios
` [PATCH v6 2/9] serial: max310x: assert the transceiver during a break
` [PATCH v6 3/9] serial: max310x: centralize the RS485 transceiver programming
` [PATCH v6 4/9] serial: max310x: convert RS485 delays from milliseconds to bit-times
` [PATCH v6 5/9] serial: max310x: wait for TX to drain before powering down in shutdown
` [PATCH v6 6/9] serial: max310x: support active-low RTS on the hardware path
` [PATCH v6 7/9] serial: max310x: schedule tx_work directly from the IRQ handler
` [PATCH v6 8/9] serial: max310x: drive RTS in software when hardware delays are too short
` [PATCH v6 9/9] serial: max310x: don't transmit while an RS485 reconfigure is pending

[PATCH v2] serial: 8250_uniphier: Use devm_clk_get_enabled()
 2026-10-05  6:55 UTC  (8+ messages)

Your Consent
 2026-10-05  6:37 UTC 

[PATCH 0/7] sparc64: add Fujitsu M3000 support
 2026-10-04 15:24 UTC  (5+ messages)
` [PATCH 7/7] hvc: add an M3000 firmware console backend

[PATCH] tty: pty: preserve open slaves after rejected locked open
 2026-10-04 12:45 UTC  (7+ messages)
` [PATCH v2] "

[PATCH v5 0/8] serial: max310x: RS485 delay and RTS fixes, software-timed delays
 2026-10-04 10:56 UTC  (16+ messages)
` [PATCH v5 1/8] serial: max310x: don't clobber the TX break bit in set_termios
` [PATCH v5 3/8] serial: max310x: convert RS485 delays from milliseconds to bit-times
` [PATCH v5 4/8] serial: max310x: wait for TX to drain before powering down in shutdown

[PATCH 01/11] params: bound array element output to the caller's page buffer
 2026-10-04 10:47 UTC  (2+ messages)

[tty:tty-linus] BUILD SUCCESS 6c95ca52f27855dd2fb74131c8d4e8325d2af7de
 2026-10-04  4:57 UTC 

[PATCH v3] serial: hvc: use modern IRQ acquisition API
 2026-10-03 21:41 UTC  (2+ messages)

[PATCH] serial: cpm_uart: use irq variable for platform_get_irq()
 2026-10-03 21:32 UTC  (5+ messages)

[PATCH] serial: core: shut down initialized port on removal
 2026-10-03 17:56 UTC  (5+ messages)
` [PATCH v2] "

[PATCH v2] serial: fsl_lpuart: add support for GPIO-controlled modem lines
 2026-10-03 17:56 UTC  (2+ messages)

[GIT PULL] TTY/Serial driver updates for 7.3-rc6
 2026-10-03 16:24 UTC  (2+ messages)

[PATCH 1/1] tty: serial: pch_uart: use dmaengine_submit() instead of ->tx_submit()
 2026-10-03 15:04 UTC  (3+ messages)

[PATCH 26/38] mfd: ioc3: add support for IOC4
 2026-10-03  1:33 UTC  (2+ messages)

[tty:tty-testing] BUILD SUCCESS c44a4925cdac02af781ebfae96df68a7bf3580b0
 2026-10-02 20:44 UTC 

[PATCH v2 0/3] Remove obsolete __MODULE_STRING()
 2026-10-02 14:05 UTC  (10+ messages)
` [PATCH v2 1/3] hwmon: Replace __MODULE_STRING() with __stringify()
` [PATCH v2 2/3] drivers: "
` [PATCH v2 3/3] module: Remove obsolete __MODULE_STRING()

[PATCH v2 RESEND] serial: sc16is7xx: fix TX gap caused by kfifo circular buffer wrap-around
 2026-10-02 11:38 UTC  (3+ messages)

[PATCH v2] MIPS: SGI-IP27: print the NMI dump on an nbcon console
 2026-10-02  9:30 UTC  (5+ messages)

[PATCH v9 00/15] Ambarella CV75 SoC minimal bring-up
 2026-10-02  9:22 UTC  (41+ messages)
` [PATCH v9 01/15] dt-bindings: arm: add Ambarella CV75 platforms
` [PATCH v9 02/15] dt-bindings: mfd: syscon: add Ambarella CV75 secure scratchpad
` [PATCH v9 03/15] dt-bindings: clock: add Ambarella CV75 RCT
` [PATCH v9 04/15] dt-bindings: gpio: pl061: add Ambarella CV75 variant
` [PATCH v9 05/15] dt-bindings: serial: snps-dw-apb-uart: add ambarella,cv75-uart
` [PATCH v9 06/15] clk: ambarella: add CV75 RCT clock controller
` [PATCH v9 07/15] gpiolib: regmap: add GPIO_REGMAP_QUIRK_SET_AFTER_DIR
` [PATCH v9 08/15] gpio: pl061: convert register access to regmap
` [PATCH v9 09/15] gpio: pl061: use IRQ_TYPE_LEVEL_MASK and IRQ_TYPE_EDGE_BOTH
` [PATCH v9 10/15] gpio: pl061: use cleanup helpers for locks
` [PATCH v9 11/15] gpio: pl061: switch data path to gpio-regmap
` [PATCH v9 12/15] gpio: pl061: add Ambarella register-layout variant
` [PATCH v9 13/15] serial: 8250_dw: add Ambarella CV75 quirks
      `  "
` [PATCH v9 14/15] arm64: ambarella: add ARCH_AMBARELLA and CV75 EVK DT
` [PATCH v9 15/15] MAINTAINERS: add ARM/AMBARELLA SoC support

[PATCH] tty: add missing driver flag kernel-doc colon
 2026-10-02  9:14 UTC  (2+ messages)

[PATCH v4 0/1] braille: nbcon: Fix Braille console for NBCON API
 2026-10-02  9:13 UTC  (7+ messages)
` [PATCH v4 1/1] braille: nbcon: Allow to use a serial console with NBCON API as Braille console

[PATCH 0/2] serial: tegra: fix RX/TX DMA descriptor use-after-free
 2026-10-02  9:13 UTC  (9+ messages)
` [PATCH 1/2] serial: tegra: fix RX "
` [PATCH 2/2] serial: tegra: fix TX "

[tty:tty-linus] BUILD SUCCESS 39495ef5d6f8019e62d65807f217a7ca8232727a
 2026-10-02  9:12 UTC 

linux-next: Tree for Sep 30 (htmldocs: include/linux/tty_driver.h)
 2026-10-02  7:29 UTC  (2+ messages)

[PATCH] serial: arc_uart: Use platform IRQ helper
 2026-10-02  7:25 UTC  (5+ messages)

[PATCH v2] serial: ucc_uart: Use platform IRQ helper
 2026-10-02  2:04 UTC  (3+ messages)

[PATCH v4 0/4] Add Laguna/Tensor G5 SoC and Frankel, Blazer & Mustang boards
 2026-10-01 20:26 UTC  (3+ messages)
` [PATCH v4 3/4] arm64: dts: google: Add initial dts for frankel/blazer/mustang

[PATCH RFC 00/10] ARM: Add support for Cortina Systems CS75xx and Securifi Almond+
 2026-10-01 19:03 UTC  (20+ messages)
` [PATCH RFC 01/10] dt-bindings: vendor-prefixes: Add Securifi
` [PATCH RFC 02/10] dt-bindings: arm: Add Cortina Systems CS7542 and Securifi Almond+
` [PATCH RFC 06/10] dt-bindings: serial: Add Cortina Systems CS7542 UART
` [PATCH RFC 07/10] tty: serial: Add Cortina Systems CS75xx UART driver

[PATCH] MIPS: SGI-IP27: print the NMI dump on an nbcon console
 2026-10-01 18:16 UTC  (6+ messages)

[PATCH v3 0/1] braille: nbcon: Fix Braille console for NBCON API
 2026-10-01 12:01 UTC  (5+ messages)
` [PATCH v3 1/1] braille: nbcon: Allow to use a serial console with NBCON API as Braille console

[PATCH] MAINTAINERS: name the gregkh/tty tty-next branch
 2026-10-01 11:25 UTC  (3+ messages)

[PATCH v2] serial: sc16is7xx: fix data corruption due to unexpected xon/xoff
 2026-10-01 10:11 UTC  (2+ messages)

[PATCH v7 0/2] serial: core: fix baud rate fallback loop and baud_base overflow
 2026-10-01  9:46 UTC  (7+ messages)
` [PATCH v7 1/2] serial: core: fix baud rate fallback in uart_get_baud_rate()
` [PATCH v7 2/2] serial: core: reject baud_base values that overflow port->uartclk in uart_set_info()

[PATCH v3] serial: 8250_bcm2835aux: Add support for RTS/CTS auto flow control
 2026-10-01  9:13 UTC  (2+ messages)

[PATCH] serial: fsl_lpuart: add support for GPIO-controlled modem lines
 2026-10-01  9:12 UTC  (3+ messages)

[PATCH] serial: sc16is7xx: fix data corruption due to unexpected xon/xoff
 2026-10-01  9:04 UTC  (2+ messages)

[PATCH v3 0/5] fbcon,vgacon,vt: Share helpers for text cursors
 2026-10-01  8:59 UTC  (3+ messages)
` [PATCH v3 1/5] vt: Add cursor-size helpers

[PATCH] serial: imx: cancel RS485 trigger hrtimers in shutdown and remove
 2026-10-01  8:57 UTC  (4+ messages)

[PATCH v2] serial: hvc: use modern IRQ acquisition API
 2026-10-01  8:44 UTC  (2+ messages)

[PATCH] serial: ma35d1: unmap MMIO on remove
 2026-10-01  8:41 UTC  (2+ messages)

[PATCH v2] serial: 8250_bcm2835aux: Add support for RTS/CTS auto flow control
 2026-10-01  8:39 UTC  (3+ messages)

[PATCH v8 00/18] Ambarella CV75 SoC minimal bring-up
 2026-10-01  7:05 UTC  (5+ messages)
` [PATCH v8 04/18] dt-bindings: pinctrl: add Ambarella CV75 pinctrl
` [PATCH v8 15/18] pinctrl: ambarella: add CV75 pin controller

[PATCH] serial: tegra: don't clear the Tx FIFO on an Rx-only reset
 2026-10-01  6:27 UTC  (2+ messages)

[PATCH v1] rust: serdev: use Delta<Jiffy> for timeouts
 2026-10-01  4:26 UTC  (6+ messages)


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox