messages from 2026-10-30 22:47:31 to 2026-11-01 05:36:10 UTC [more...]
[PATCH v3 0/4] Fix transmit handling on SCI/RSCI ports
2026-11-01 5:35 UTC (18+ messages)
` [PATCH] MAINTAINERS: Fix Intel TDX kernel file patterns
` [PATCH -v2] "
[BUG] serial: TX kfifo underflow when TCOFLUSH races with TX DMA (samsung, sprd, msm, pch_uart, tegra)
2026-11-01 2:40 UTC (19+ messages)
` [PATCH 0/1] tty: serial: samsung: fix TX fifo underflow on flush race
` [PATCH] "
` [PATCH 0/5] serial: fix TX kfifo underflow on flush in five drivers
` [PATCH 1/5] tty: serial: samsung: fix TX kfifo underflow on flush
` [PATCH 2/5] serial: tegra: don't advance the TX kfifo for a flushed transfer
` [PATCH 3/5] serial: sprd: fix TX kfifo underflow on flush
` [PATCH 4/5] tty: serial: msm: "
` [PATCH 5/5] serial: pch_uart: "
[PATCH RESEND v4] ACPI: SPCR: Support UART clock frequency field
2026-10-31 20:56 UTC (2+ messages)
[PATCH v8 0/6] serial: 8250: serialize DMA cancellation with buffer reuse
2026-10-31 18:00 UTC (10+ messages)
` [PATCH v8 6/6] serial: 8250: retain DMA resources when termination fails
[PATCH 0/5] tty: serial: remove redundant pm_runtime_dont_use_autosuspend() calls
2026-10-31 17:20 UTC (11+ messages)
` [PATCH 1/5] serial: 8250_omap: remove redunant "
` [PATCH 2/5] serial: fsl_lpuart: remove redundant "
` [PATCH 3/5] serial: xilinx_uartps: "
` [PATCH 4/5] serial: port: "
` [PATCH 5/5] serial: uartlite: "
[BUG] serial: amba-pl011, imx, fsl_lpuart: ->flush_buffer() unmaps the TX DMA buffer before the transfer has stopped
2026-10-31 13:44 UTC (9+ messages)
` [PATCH 0/2] serial: keep the flushed TX buffer mapped until DMA "
` [PATCH 1/2] serial: amba-pl011: keep the flushed TX buffer mapped until DMA stops
` [PATCH 2/2] tty: serial: fsl_lpuart: don't unmap TX buffer before DMA has stopped
[PATCH RFC 00/12] Add BL808 UART3 support with a Rust serial-core polling console
2026-10-31 11:26 UTC (7+ messages)
` [PATCH RFC 12/12] MAINTAINERS: Add Bouffalo Lab BL808 support
[PATCH 0/2] tty: serial: samsung: RX DMA fixes in stop_rx and the RX completion
2026-10-31 1:03 UTC (5+ messages)
` [PATCH 1/2] tty: serial: samsung: pause the RX DMA channel in stop_rx
` [PATCH 2/2] tty: serial: samsung: do not re-arm RX DMA once RX has been stopped
[PATCH] tty: serial: samsung: use dmaengine_terminate_sync() in release_dma
2026-10-31 0:02 UTC (2+ messages)
[PATCH v2 00/15] HID: ft260: add UART and GPIO support, plus I2C fixes
2026-10-30 23:03 UTC (25+ messages)
` [PATCH v2 01/15] HID: ft260: add serial driver
` [PATCH v2 02/15] HID: ft260: uart: fix the "
` [PATCH v2 03/15] HID: ft260: add GPIO support
` [PATCH v2 05/15] HID: ft260: i2c: silence sysfs store big-numbers
` [PATCH v2 07/15] HID: ft260: uart: enable flow control
` [PATCH v2 08/15] HID: ft260: uart: add modem pins control via ioctl
` [PATCH v2 09/15] HID: ft260: group sysfs attrs per HID interface
` [PATCH v2 11/15] HID: ft260: workaround for TN_189 errata endpoint STALL after enumeration
` [PATCH v2 12/15] HID: ft260: i2c: abort in-flight transfers with STOP before reset
` [PATCH v2 13/15] HID: ft260: i2c: reject an I2C clock outside the supported range
` [PATCH v2 14/15] HID: ft260: i2c: fix i2c_reset sysfs store return value
` [PATCH v2 15/15] HID: ft260: i2c: recover a bus held by a slave
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox