messages from 2026-11-12 08:02:56 to 2026-11-14 23:15:40 UTC [more...]
[PATCH v3 00/16] HID: ft260: add UART and GPIO support, plus I2C fixes
2026-11-14 23:15 UTC (22+ messages)
` [PATCH v3 01/16] HID: ft260: add serial driver
` [PATCH v3 02/16] HID: ft260: uart: fix the "
` [PATCH v3 03/16] HID: ft260: add GPIO support
` [PATCH v3 04/16] HID: ft260: i2c: reduce driver module loading time
` [PATCH v3 05/16] HID: ft260: fix sysfs store failure notice for big numbers
` [PATCH v3 06/16] HID: ft260: i2c: reduce bus-error message severity
` [PATCH v3 07/16] HID: ft260: uart: enable flow control
` [PATCH v3 08/16] HID: ft260: uart: add modem pins control via ioctl
` [PATCH v3 09/16] HID: ft260: group sysfs attrs per HID interface
` [PATCH v3 10/16] HID: ft260: i2c: fix large write transaction failure
` [PATCH v3 11/16] HID: ft260: workaround for TN_189 errata endpoint STALL after enumeration
` [PATCH v3 12/16] HID: ft260: i2c: abort in-flight transfers with STOP before reset
` [PATCH v3 13/16] HID: ft260: i2c: reject an I2C clock outside the supported range
` [PATCH v3 14/16] HID: ft260: i2c: fix i2c_reset sysfs store return value
` [PATCH v3 15/16] HID: ft260: i2c: recover a bus held by a slave
` [PATCH v3 16/16] HID: ft260: use lock guards
[PATCH v7 00/10] ARM: Add support for Cortina Systems CS75xx and Securifi Almond+
2026-11-14 14:06 UTC (20+ messages)
` [PATCH v7 01/10] dt-bindings: vendor-prefixes: Add Securifi
` [PATCH v7 02/10] dt-bindings: arm: Add Cortina Systems CS7542 and Securifi Almond+
` [PATCH v7 03/10] dt-bindings: arm: cpus: Add Cortina Systems CS7542 enable method
` [PATCH v7 04/10] ARM: goldengate: Add support for the CS75xx SoC family
` [PATCH v7 05/10] ARM: debug: Add Cortina Systems CS75xx UART0 support
` [PATCH v7 06/10] dt-bindings: serial: Add Cortina Systems CS7542 UART
` [PATCH v7 07/10] tty: serial: Add Cortina UART driver
` [PATCH v7 08/10] ARM: dts: cortina: Add CS7542 SoC and Securifi Almond+ board
` [PATCH v7 09/10] ARM: multi_v7_defconfig: Enable Cortina Systems CS75xx support
` [PATCH v7 10/10] MAINTAINERS: Add entry for Cortina Systems CS75xx
[PATCH 00/22] mm: introduce N_MEMORY_COMMON
2026-11-14 7:50 UTC (47+ messages)
` [PATCH 01/22] mm: add node-state-filtered zone and node iterators
` [PATCH 02/22] mm: publish and clear node memory states via helpers
` [PATCH 03/22] mm: introduce the common-memory node state
` [PATCH 04/22] mm/page_alloc: build zonelists from common memory
` [PATCH 05/22] mm/mempolicy: keep interleave and tmpfs mount policies on "
` [PATCH 06/22] mm: base hash distribution on common memory nodes
` [PATCH 07/22] mm/memory_hotplug: migrate offlined pages to common memory
` [PATCH 08/22] mm/memory-tiers: restrict demotion topology "
` [PATCH 09/22] mm/ksm: restrict merging "
` [PATCH 10/22] mm/khugepaged: restrict collapse "
` [PATCH 11/22] mm/mempolicy: don't NUMA-hint folios outside "
` [PATCH 12/22] mm/damon: restrict DAMON-native folio operations to "
` [PATCH 13/22] mm/hugetlb: restrict pool growth "
` [PATCH 14/22] mm/page_alloc: count common memory nodes for kswapd recovery
` [PATCH 15/22] mm/oom_kill: compare OOM constraints against common memory
` [PATCH 16/22] tty/sysrq: use common memory for the manual OOM zonelist
` [PATCH 17/22] mm/vmscan: restrict reclaim to common memory
` [PATCH 18/22] mm/compaction: restrict compaction "
` [PATCH 19/22] mm/migrate: restrict move_pages() destinations "
` [PATCH 20/22] PM: hibernate: size the image from "
` [PATCH 21/22] mm/khugepaged: base the recommended min_free_kbytes on "
` [PATCH 22/22] nodemask: remove the now-unused first_memory_node/next_memory_node
[PATCH v2] serial: sc16is7xx: Fix clock leak on invalid clock frequency
2026-11-13 23:34 UTC (5+ messages)
[PATCH 0/7] rust: treewide: remove driver unbind callbacks
2026-11-13 21:14 UTC (5+ messages)
` [PATCH 4/7] rust: serdev: remove the unbind() callback
[PATCH v4 0/7] Fix transmit handling on SCI/RSCI ports
2026-11-13 20:00 UTC (15+ messages)
` [PATCH v4 1/7] serial: sh-sci: Drop TE disable at end of transmission on SCI
` [PATCH v4 2/7] serial: sh-sci: Keep TX enabled on TEI while data is pending
` [PATCH v4 3/7] serial: rsci: Enable transmit end interrupt in rsci_stop_tx()
` [PATCH v4 4/7] serial: sh-sci: Do not kick TX from sci_er_interrupt() on RSCI
` [PATCH v4 5/7] serial: sh-sci: Skip TDxE clear when hardware clears it automatically
` [PATCH v4 6/7] serial: sh-sci: Toggle TE when restoring SCSCR in console write on SCI
` [PATCH v4 7/7] serial: rsci: Simplify rsci_transmit_chars()
[PATCH v6 00/10] dmaengine: dw: serialize completion and termination
2026-11-13 19:30 UTC (7+ messages)
` [PATCH v6 04/10] dmaengine: dw: extract hardware-LLP residue calculation
` [PATCH v6 07/10] dmaengine: dw: report residue for queued transfers
` [PATCH v6 10/10] dmaengine: dw: Prevent tx-status calling DMA-desc callback
[PATCH v2 0/9] arm64: mediatek: Add initial MT6895 and Xiaomi Poco X4 GT support
2026-11-13 19:15 UTC (19+ messages)
` [PATCH v2 1/9] dt-bindings: arm: mediatek: Add MT6895 and Xiaomi Poco X4 GT
` [PATCH v2 2/9] dt-bindings: serial: mediatek,uart: Add compatible for MT6895
` [PATCH v2 3/9] dt-bindings: watchdog: mediatek,mtk-wdt: "
` [PATCH v2 4/9] watchdog: mediatek: Add support "
` [PATCH v2 5/9] dt-bindings: timer: mediatek,timer: Add compatible "
` [PATCH v2 6/9] dt-bindings: input: mediatek,mt6779-keypad: "
` [PATCH v2 7/9] arm64: dts: mediatek: Add MT6895 pinmux macro header file
` [PATCH v2 8/9] arm64: dts: mediatek: Add MT6895 SoC
` [PATCH v2 9/9] arm64: dts: mediatek: Add Xiaomi Poco X4 GT
[PATCH] serial: sc16is7xx: Fix clock leak on invalid clock frequency
2026-11-13 16:58 UTC (4+ messages)
[PATCH v3] tty: serial: lpuart: Add port lock for registers read in lpuart32_set_termios()
2026-11-13 16:02 UTC (2+ messages)
[PATCH] serial: xilinx_uartps: fix oops when disabling RS-485
2026-11-13 15:13 UTC (2+ messages)
[PATCH RESEND v4] ACPI: SPCR: Support UART clock frequency field
2026-11-13 14:36 UTC (2+ messages)
[PATCH 00/27] rockchip: Add RK3572 and Forlinx OK3572-C support
2026-11-13 10:17 UTC (3+ messages)
` [PATCH 08/27] pinctrl: rockchip: Add RK3572 support
[PATCH v13 0/8] serial: 8250: serialize DMA cancellation with buffer reuse
2026-11-13 10:17 UTC (17+ messages)
` [PATCH v13 1/8] serial: 8250_omap: separate locked TX DMA completion processing
` [PATCH v13 2/8] serial: serialize asynchronous write wakeups with the port lock
` [PATCH v13 3/8] serial: 8250_omap: serialize RX DMA completion and flushing
` [PATCH v13 4/8] serial: 8250_omap: quiesce DMA IRQ handling before shutdown
` [PATCH v13 5/8] serial: core: allow drivers to reserve flushed transmit storage
` [PATCH v13 6/8] serial: 8250: drain canceled TX DMA before reusing its buffer
` [PATCH v13 7/8] serial: 8250: retire canceled RX DMA before reusing the receive buffer
` [PATCH v13 8/8] serial: 8250: retain DMA resources when termination fails
[PATCH] serial: sc16is7xx: Fix clock leak on invalid clock frequency
2026-11-12 21:33 UTC (3+ messages)
[PATCH v6 0/4] rust: serdev: Refactor
2026-11-12 19:03 UTC (10+ messages)
` [PATCH v6 1/4] tty: serdev: Add mutex lock
` [PATCH v6 2/4] tty: serdev: Export functions to pause receive_buf callback calls
` [PATCH v6 3/4] rust: serdev: Replace `active` mutex with receive pause
` [PATCH v6 4/4] rust: serdev: Simplify callbacks
[PATCH v3 0/3] MIPS: SiByte: Fix serial device regressions
2026-11-12 18:55 UTC (4+ messages)
` [PATCH v3 3/3] serial: sb1250-duart: Convert to use a platform device
[PATCH v12 0/8] serial: 8250: serialize DMA cancellation with buffer reuse
2026-11-12 16:28 UTC (9+ messages)
` [PATCH v12 2/8] serial: serialize asynchronous write wakeups with the port lock
` [PATCH v12 5/8] serial: core: allow drivers to reserve flushed transmit storage
` [PATCH v12 7/8] serial: 8250: retire canceled RX DMA before reusing the receive buffer
` [PATCH v12 8/8] serial: 8250: retain DMA resources when termination fails
[PATCH v2 0/6] serial: vt8500: Clean up the probe using devm and new serial core helpers
2026-11-12 15:33 UTC (7+ messages)
` [PATCH v2 1/6] serial: core: Add uart_console_port()
` [PATCH v2 2/6] serial: core: Allocate a free line for UART_LINE_AUTO ports
` [PATCH v2 3/6] serial: vt8500: Look up console ports with uart_console_port()
` [PATCH v2 4/6] serial: vt8500: Drop the port index bitmap
` [PATCH v2 5/6] serial: vt8500: Use devm_clk_get_enabled()
` [PATCH v2 6/6] serial: vt8500: Handle uart_add_one_port() failure
[PATCH v2 0/2] serial: core: two fixes for the port removal path
2026-11-12 14:32 UTC (3+ messages)
` [PATCH v2 2/2] serial: core: do not touch the port after dropping the last reference
[PATCH v2] serial: core: fix use-after-free after driver module unload
2026-11-12 14:31 UTC (2+ messages)
[PATCH 0/4] serial: vt8500: Clean up the probe
2026-11-12 13:16 UTC (4+ messages)
` [PATCH 1/4] serial: vt8500: Find console ports in the serial core state
[PATCH] serial core: fix use-after-free after driver module unload
2026-11-12 10:28 UTC (3+ messages)
[PATCH RESEND v4 0/2] serial: amba-pl011: fix RS485 state on enable and reconfiguration
2026-11-12 8:40 UTC (5+ messages)
` [PATCH RESEND v4 1/2] serial: amba-pl011: finish a transmission still running when RS485 is enabled
` [PATCH RESEND v4 2/2] serial: amba-pl011: keep RS485 transmission running on reconfiguration
[PATCH RESEND] serial: amba-pl011: end an RS485 transmission when TX is flushed
2026-11-12 8:17 UTC (2+ messages)
[PATCH] serial: amba-pl011: Fix divide by zero in pl011_console_get_options()
2026-11-12 8:08 UTC (2+ messages)
[PATCH v2] tty: serial: lpuart: Add port lock for registers read in lpuart32_set_termios()
2026-11-12 8:02 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox