From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Subject: Re: [PATCH 00/25] serial: sh-sci: Add external clock and BRG Support Date: Fri, 20 Nov 2015 10:09:24 +0100 Message-ID: References: <1447958344-836-1-git-send-email-geert+renesas@glider.be> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: In-Reply-To: <1447958344-836-1-git-send-email-geert+renesas@glider.be> Sender: linux-kernel-owner@vger.kernel.org To: Geert Uytterhoeven Cc: Greg Kroah-Hartman , Simon Horman , Magnus Damm , Yoshinori Sato , Laurent Pinchart , "linux-serial@vger.kernel.org" , Linux-sh list , "linux-kernel@vger.kernel.org" List-Id: linux-serial@vger.kernel.org On Thu, Nov 19, 2015 at 7:38 PM, Geert Uytterhoeven wrote: > This patch series adds support to the Renesas SCI serial driver for > - the optional external clock on (H)SCI(F) and some SCIFA, where this > pin can serve as a clock input, > - the optional clock sources for the Baud Rate Generator for External > Clock (BRG), as found on some SCIF variants and on HSCIF. > Using external clocks increases the range and accuracy of supported baud > rates. Please see the descriptions of the DTS patches for more detailed > information regarding the impact on the supported platforms. For the consumers: I've pushed this (incl. the dependencies and a few WIP patches) to the scif-brg branch of my renesas-drivers repo. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds