Re: [PATCH v6 00/14] serial: qcom-geni-serial: implement support for SE DMA

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Thu, Jan 12, 2023 at 09:59:51AM +0100, Bartosz Golaszewski wrote:
> On Thu, Dec 29, 2022 at 4:50 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
> >
> > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> >
> > The goal of this series is to update the qcom-geni-serial driver to use
> > the DMA mode of the QUPv3 serial engine. This is accomplished by the last
> > patch in the series. The previous ones contain either various tweaks,
> > reworks and refactoring or prepare the driver for adding DMA support.
> >
> > More work will follow on the serial engine in order to reduce code
> > redundancy among its users and add support for SE DMA to the qcom GENI
> > SPI driver.
> >
> > v5 -> v6:
> > - move patch 12/14 to the front of the series and mark it as a fix
> > - rebase on top of v6.2-rc1 (there were some updates to the driver)
> >
> > v4 -> v5:
> > - split patch 8/13 into two: one for splitting out the chunk sending code
> >   and one for refactoring it (for easier review)
> > - when stopping uart: disable the irq first before stopping transfers in
> >   progress, otherwise we rist rescheduling additional transfers after
> >   interrupt
> > - make types even nore consistent in qcom_geni_serial_send_chunk_fifo()
> >
> > v3 -> v4:
> > - don't assign NULL (even cast) to variables of type dma_addr_t
> > - refactor checking the SE_GENI_STATUS into two inline functions
> > - drop min_t() in favor of regular min() after adding some consistency to types
> > - check if the abort command was successful and emit a message if not when
> >   stopping TX in DMA mode
> >
> > v2 -> v3:
> > - drop devres patches from the series
> >
> > v1 -> v2:
> > - turn to_dev_uport() macro into a static inline function
> > - use CIRC_CNT_TO_END() and uart_xmit_advance() where applicable and don't
> >   handle xmit->tail directly
> > - drop sizeof() where BYTES_PER_FIFO_WORD can be used
> > - further refactor qcom_geni_serial_handle_tx_fifo()
> > - collect review tags
> >
> > Bartosz Golaszewski (14):
> >   tty: serial: qcom-geni-serial: stop operations in progress at shutdown
> >   tty: serial: qcom-geni-serial: drop unneeded forward definitions
> >   tty: serial: qcom-geni-serial: remove unused symbols
> >   tty: serial: qcom-geni-serial: align #define values
> >   tty: serial: qcom-geni-serial: improve the to_dev_port() macro
> >   tty: serial: qcom-geni-serial: remove stray newlines
> >   tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr()
> >   tty: serial: qcom-geni-serial: remove unneeded tabs
> >   tty: serial: qcom-geni-serial: split out the FIFO tx code
> >   tty: serial: qcom-geni-serial: refactor
> >     qcom_geni_serial_send_chunk_fifo()
> >   tty: serial: qcom-geni-serial: drop the return value from handle_rx
> >   tty: serial: qcom-geni-serial: use of_device_id data
> >   soc: qcom-geni-se: add more symbol definitions
> >   tty: serial: qcom-geni-serial: add support for serial engine DMA
> >
> >  drivers/tty/serial/qcom_geni_serial.c | 626 +++++++++++++++++---------
> >  include/linux/qcom-geni-se.h          |   3 +
> >  2 files changed, 413 insertions(+), 216 deletions(-)
> >
> > --
> > 2.37.2
> >
> 
> It's been two weeks without any further comments, can this be picked
> up now into the serial tree?

When I dig out of the huge hole that is my todo queue, yes:
	$ mdfrm -c ~/mail/todo/
	2560 messages in /home/gregkh/mail/todo/

You are in good company...