Re: [PATCH v2 RESEND 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings

[Rob Herring <robh@kernel.org>]

On Tue, Nov 30, 2021 at 01:13:21PM +0200, Sam Protsenko wrote:
> Add constants for choosing USIv2 configuration mode in device tree.
> Those are further used in USI driver to figure out which value to write
> into SW_CONF register. Also document USIv2 IP-core bindings.
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
> Changes in v2:
>   - Combined dt-bindings doc and dt-bindings header patches
>   - Added i2c node to example in bindings doc
>   - Added mentioning of shared internal circuits
>   - Added USI_V2_NONE value to bindings header
> 
>  .../bindings/soc/samsung/exynos-usi.yaml      | 135 ++++++++++++++++++
>  include/dt-bindings/soc/samsung,exynos-usi.h  |  17 +++
>  2 files changed, 152 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
>  create mode 100644 include/dt-bindings/soc/samsung,exynos-usi.h
> 
> diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
> new file mode 100644
> index 000000000000..a822bc62b3cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
> @@ -0,0 +1,135 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung's Exynos USI (Universal Serial Interface) binding
> +
> +maintainers:
> +  - Sam Protsenko <semen.protsenko@linaro.org>
> +  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> +
> +description: |
> +  USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
> +  USI shares almost all internal circuits within each protocol, so only one
> +  protocol can be chosen at a time. USI is modeled as a node with zero or more
> +  child nodes, each representing a serial sub-node device. The mode setting
> +  selects which particular function will be used.
> +
> +  Refer to next bindings documentation for information on protocol subnodes that
> +  can exist under USI node:
> +
> +  [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml
> +  [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
> +  [3] Documentation/devicetree/bindings/spi/spi-samsung.txt
> +
> +properties:
> +  $nodename:
> +    pattern: "^usi@[0-9a-f]+$"
> +
> +  compatible:
> +    const: samsung,exynos-usi-v2

Use SoC based compatibles.

> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Bus (APB) clock
> +      - description: Operating clock for UART/SPI/I2C protocol
> +
> +  clock-names:
> +    items:
> +      - const: pclk
> +      - const: ipclk
> +
> +  ranges: true
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  samsung,sysreg:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Should be phandle/offset pair. The phandle to System Register syscon node
> +      (for the same domain where this USI controller resides) and the offset
> +      of SW_CONF register for this USI controller.
> +
> +  samsung,mode:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Selects USI function (which serial protocol to use). Refer to
> +      <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.

This seems to be redundant. Just check which child is enabled.

> +
> +  samsung,clkreq-on:
> +    type: boolean
> +    description:
> +      Enable this property if underlying protocol requires the clock to be
> +      continuously provided without automatic gating. As suggested by SoC
> +      manual, it should be set in case of SPI/I2C slave, UART Rx and I2C
> +      multi-master mode. Usually this property is needed if USI mode is set
> +      to "UART".
> +
> +      This property is optional.
> +
> +patternProperties:
> +  # All other properties should be child nodes
> +  "^.*@[0-9a-f]+$":

Only 'serial', 'spi', or 'i2c' are valid.

> +    type: object
> +    description: Child node describing underlying USI serial protocol
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - ranges
> +  - "#address-cells"
> +  - "#size-cells"
> +  - samsung,sysreg
> +  - samsung,mode
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/soc/samsung,exynos-usi.h>
> +
> +    usi0: usi@138200c0 {
> +        compatible = "samsung,exynos-usi-v2";
> +        reg = <0x138200c0 0x20>;
> +        samsung,sysreg = <&sysreg_peri 0x1010>;
> +        samsung,mode = <USI_V2_UART>;
> +        samsung,clkreq-on; /* needed for UART mode */
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges;
> +        clocks = <&cmu_peri 32>, <&cmu_peri 31>;
> +        clock-names = "pclk", "ipclk";
> +        status = "disabled";

Why are you disabling your example? Remove status.

> +
> +        serial_0: serial@13820000 {
> +            compatible = "samsung,exynos850-uart";
> +            reg = <0x13820000 0xc0>;
> +            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&cmu_peri 32>, <&cmu_peri 31>;
> +            clock-names = "uart", "clk_uart_baud0";
> +            status = "disabled";
> +        };
> +
> +        hsi2c_0: i2c@13820000 {
> +            compatible = "samsung,exynosautov9-hsi2c";
> +            reg = <0x13820000 0xc0>;
> +            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            clocks = <&cmu_peri 32>, <&cmu_peri 31>;
> +            clock-names = "hsi2c_pclk", "hsi2c";
> +            status = "disabled";
> +        };
> +    };
> diff --git a/include/dt-bindings/soc/samsung,exynos-usi.h b/include/dt-bindings/soc/samsung,exynos-usi.h
> new file mode 100644
> index 000000000000..a01af169d249
> --- /dev/null
> +++ b/include/dt-bindings/soc/samsung,exynos-usi.h
> @@ -0,0 +1,17 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * Copyright (c) 2021 Linaro Ltd.
> + * Author: Sam Protsenko <semen.protsenko@linaro.org>
> + *
> + * Device Tree bindings for Samsung Exynos USI (Universal Serial Interface).
> + */
> +
> +#ifndef __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
> +#define __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H
> +
> +#define USI_V2_NONE		0
> +#define USI_V2_UART		1
> +#define USI_V2_SPI		2
> +#define USI_V2_I2C		3
> +
> +#endif /* __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H */
> -- 
> 2.30.2
> 
>