From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthias Brugger Subject: Re: [PATCH v6 0/2] Add basic support for Mediatek MT2712 SoC Date: Mon, 14 Aug 2017 17:15:37 +0200 Message-ID: References: <1501847977-4023-1-git-send-email-yt.shen@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1501847977-4023-1-git-send-email-yt.shen@mediatek.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: YT Shen , Rob Herring Cc: Mark Rutland , Thomas Gleixner , Jason Cooper , Marc Zyngier , Greg Kroah-Hartman , Catalin Marinas , Will Deacon , Mars Cheng , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com, yingjoe.chen@mediatek.com List-Id: linux-serial@vger.kernel.org On 08/04/2017 01:59 PM, YT Shen wrote: > MT2712 is a SoC based on 64bit ARMv8 architecture. > MT2712 share many HW IP with MT8173. This patchset was tested on MT2712 evaluation board, and boot to shell ok. > > This series contains document bindings, device tree including interrupt and uart. > pushed to v4.13-next/dts64 Thanks > Changes compared to v5: > - remove the soc node > > Changes compared to v4: > - rebase to 4.13-rc1 > - use two clocks (baud_clk & sys_clk) instead of one uart_clk to the correct bindings > > Changes compared to v3: > - use two uart clocks refer to the bindings > > Changes compared to v2: > - remove alias from serial1 to serial5 > - remove initrd-start and initrd-end > - change GIC_CPU_MASK_SIMPLE(6) to GIC_CPU_MASK_RAW(0x13) > - change gic-400 reg range > > Changes compared to v1: > - change subject prefix for bindings > - change device tree license to SPDX tag. > - change bootargs parameter to DT usage. > - change intpol-controller to interrupt-controller > > YT Shen (2): > dt-bindings: arm: Add bindings for Mediatek MT2712 SoC Platform > arm64: dts: Add Mediatek SoC MT2712 and evaluation board dts and > Makefile > > Documentation/devicetree/bindings/arm/mediatek.txt | 4 + > .../interrupt-controller/mediatek,sysirq.txt | 1 + > .../devicetree/bindings/serial/mtk-uart.txt | 1 + > arch/arm64/boot/dts/mediatek/Makefile | 1 + > arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 32 ++++ > arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 171 +++++++++++++++++++++ > 6 files changed, 210 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt2712-evb.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt2712e.dtsi >