* [PATCH v2 04/11] fbdev: export get_fb_info()/put_fb_info()
From: David Herrmann @ 2012-07-08 21:56 UTC (permalink / raw)
To: linux-serial
Cc: linux-kernel, florianschandinat, linux-fbdev, gregkh, alan,
bonbons, David Herrmann
In-Reply-To: <1341784614-2797-1-git-send-email-dh.herrmann@googlemail.com>
When adding other internal users of the framebuffer subsystem, we need a
way to get references to framebuffers. These two functions already exist
so export them.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
drivers/video/fbmem.c | 6 ++++--
include/linux/fb.h | 3 +++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 0dff12a..474460c 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -46,7 +46,7 @@ static DEFINE_MUTEX(registration_lock);
struct fb_info *registered_fb[FB_MAX] __read_mostly;
int num_registered_fb __read_mostly;
-static struct fb_info *get_fb_info(unsigned int idx)
+struct fb_info *get_fb_info(unsigned int idx)
{
struct fb_info *fb_info;
@@ -61,14 +61,16 @@ static struct fb_info *get_fb_info(unsigned int idx)
return fb_info;
}
+EXPORT_SYMBOL(get_fb_info);
-static void put_fb_info(struct fb_info *fb_info)
+void put_fb_info(struct fb_info *fb_info)
{
if (!atomic_dec_and_test(&fb_info->count))
return;
if (fb_info->fbops->fb_destroy)
fb_info->fbops->fb_destroy(fb_info);
}
+EXPORT_SYMBOL(put_fb_info);
int lock_fb_info(struct fb_info *info)
{
diff --git a/include/linux/fb.h b/include/linux/fb.h
index ac3f1c6..2d51c0e 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1033,6 +1033,9 @@ static inline void unlock_fb_info(struct fb_info *info)
mutex_unlock(&info->lock);
}
+extern struct fb_info *get_fb_info(unsigned int idx);
+extern void put_fb_info(struct fb_info *fb_info);
+
static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
u8 *src, u32 s_pitch, u32 height)
{
--
1.7.11.1
^ permalink raw reply related
* [PATCH v2 03/11] fblog: new framebuffer kernel log dummy driver
From: David Herrmann @ 2012-07-08 21:56 UTC (permalink / raw)
To: linux-serial
Cc: linux-kernel, florianschandinat, linux-fbdev, gregkh, alan,
bonbons, David Herrmann
In-Reply-To: <1341784614-2797-1-git-send-email-dh.herrmann@googlemail.com>
Fblog displays all kernel log messages on all connected framebuffers. It
replaces fbcon when CONFIG_VT=n is selected. Its main purpose is to debug
boot problems by displaying the whole boot log on the screen. This patch
provides the first dummy module-init/deinit functions.
As it uses all the font and fb functions I placed it in
drivers/video/console. However, this means that we need to move the check
for CONFIG_VT in Makefile/Kconfig from drivers/video into
drivers/video/console as fblog does not depend on CONFIG_VT.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
drivers/video/Kconfig | 5 +----
drivers/video/Makefile | 2 +-
drivers/video/console/Kconfig | 37 +++++++++++++++++++++++++++++--------
drivers/video/console/Makefile | 1 +
drivers/video/console/fblog.c | 41 +++++++++++++++++++++++++++++++++++++++++
5 files changed, 73 insertions(+), 13 deletions(-)
create mode 100644 drivers/video/console/fblog.c
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0217f74..e8fd53d 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2448,10 +2448,7 @@ source "drivers/video/omap/Kconfig"
source "drivers/video/omap2/Kconfig"
source "drivers/video/exynos/Kconfig"
source "drivers/video/backlight/Kconfig"
-
-if VT
- source "drivers/video/console/Kconfig"
-endif
+source "drivers/video/console/Kconfig"
if FB || SGI_NEWPORT_CONSOLE
source "drivers/video/logo/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index ee8dafb..9f8a7f0 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -11,7 +11,7 @@ fb-y := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
modedb.o fbcvt.o
fb-objs := $(fb-y)
-obj-$(CONFIG_VT) += console/
+obj-y += console/
obj-$(CONFIG_LOGO) += logo/
obj-y += backlight/
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index e2c96d0..7374362 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,7 +6,7 @@ menu "Console display driver support"
config VGA_CONSOLE
bool "VGA text console" if EXPERT || !X86
- depends on !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !SUPERH && !BLACKFIN && !AVR32 && !MN10300 && (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER)
+ depends on VT && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !SUPERH && !BLACKFIN && !AVR32 && !MN10300 && (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER)
default y
help
Saying Y here will allow you to use Linux in text mode through a
@@ -45,7 +45,7 @@ config VGACON_SOFT_SCROLLBACK_SIZE
screenfuls of scrollback buffer
config MDA_CONSOLE
- depends on !M68K && !PARISC && ISA
+ depends on VT && !M68K && !PARISC && ISA
tristate "MDA text console (dual-headed) (EXPERIMENTAL)"
---help---
Say Y here if you have an old MDA or monochrome Hercules graphics
@@ -61,14 +61,14 @@ config MDA_CONSOLE
config SGI_NEWPORT_CONSOLE
tristate "SGI Newport Console support"
- depends on SGI_IP22
+ depends on VT && SGI_IP22
help
Say Y here if you want the console on the Newport aka XL graphics
card of your Indy. Most people say Y here.
config DUMMY_CONSOLE
bool
- depends on VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y
+ depends on VT && (VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y)
default y
config DUMMY_CONSOLE_COLUMNS
@@ -89,7 +89,7 @@ config DUMMY_CONSOLE_ROWS
config FRAMEBUFFER_CONSOLE
tristate "Framebuffer Console support"
- depends on FB
+ depends on VT && FB
select CRC32
help
Low-level framebuffer-based console driver.
@@ -122,16 +122,37 @@ config FRAMEBUFFER_CONSOLE_ROTATION
config STI_CONSOLE
bool "STI text console"
- depends on PARISC
+ depends on VT && PARISC
default y
help
The STI console is the builtin display/keyboard on HP-PARISC
machines. Say Y here to build support for it into your kernel.
The alternative is to use your primary serial port as a console.
+config FBLOG
+ tristate "Framebuffer Kernel Log Driver"
+ depends on !VT && FB
+ default n
+ help
+ This driver displays all kernel log messages on all connected
+ framebuffers. It is mutually exclusive with CONFIG_FRAMEBUFFER_CONSOLE
+ and CONFIG_VT. It was mainly created for debugging purposes when
+ CONFIG_VT is not selected but you still want kernel boot messages on
+ the screen.
+
+ This driver overwrites all other graphics output on the framebuffer as
+ long as it is active so the kernel log will always be visible. You
+ need to disable this driver via sysfs to be able to start another
+ graphics application.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the module will
+ be called fblog.
+
config FONTS
bool "Select compiled-in fonts"
- depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE || FBLOG
help
Say Y here if you would like to use fonts other than the default
your frame buffer console usually use.
@@ -158,7 +179,7 @@ config FONT_8x8
config FONT_8x16
bool "VGA 8x16 font" if FONTS
- depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE || STI_CONSOLE || USB_SISUSBVGA_CON
+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE || STI_CONSOLE || USB_SISUSBVGA_CON || FBLOG
default y if !SPARC && !FONTS
help
This is the "high resolution" font for the VGA frame buffer (the one
diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile
index 9a52226..ec0e155 100644
--- a/drivers/video/console/Makefile
+++ b/drivers/video/console/Makefile
@@ -20,6 +20,7 @@ font-objs += $(font-objs-y)
# Each configuration option enables a list of files.
+obj-$(CONFIG_FBLOG) += fblog.o font.o
obj-$(CONFIG_DUMMY_CONSOLE) += dummycon.o
obj-$(CONFIG_SGI_NEWPORT_CONSOLE) += newport_con.o font.o
obj-$(CONFIG_STI_CONSOLE) += sticon.o sticore.o font.o
diff --git a/drivers/video/console/fblog.c b/drivers/video/console/fblog.c
new file mode 100644
index 0000000..fb39737
--- /dev/null
+++ b/drivers/video/console/fblog.c
@@ -0,0 +1,41 @@
+/*
+ * Framebuffer Kernel Log Driver
+ * Copyright (c) 2012 David Herrmann <dh.herrmann@googlemail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Framebuffer Kernel Log
+ * This driver prints the kernel log to all connected display devices. It
+ * replaces CONFIG_VT and cannot run simultaneously with it. It does not provide
+ * any virtual-terminal, though. It should only be used to get kernel boot
+ * messages to debug kernel errors.
+ * Hence, this driver is neither optimized for speed, nor does it provide any
+ * fancy features like colored text output.
+ * This driver forcibly writes to the framebuffer while active, therefore, you
+ * cannot run other graphics applications simultaneously. You need to disable
+ * all fblog instances before running other graphics applications.
+ */
+
+#include <linux/module.h>
+
+static int __init fblog_init(void)
+{
+ return 0;
+}
+
+static void __exit fblog_exit(void)
+{
+}
+
+module_init(fblog_init);
+module_exit(fblog_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Herrmann <dh.herrmann@googlemail.com>");
+MODULE_DESCRIPTION("Framebuffer Kernel Log Driver");
--
1.7.11.1
^ permalink raw reply related
* [PATCH v2 11/11] MAINTAINERS: add fblog entry
From: David Herrmann @ 2012-07-08 21:56 UTC (permalink / raw)
To: linux-serial
Cc: linux-kernel, florianschandinat, linux-fbdev, gregkh, alan,
bonbons, David Herrmann
In-Reply-To: <1341784614-2797-1-git-send-email-dh.herrmann@googlemail.com>
Add myself as maintainer for the fblog driver to the MAINTAINERS file.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
MAINTAINERS | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index ae8fe46..249b02a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2854,6 +2854,12 @@ F: drivers/video/
F: include/video/
F: include/linux/fb.h
+FRAMEBUFFER LOG DRIVER
+M: David Herrmann <dh.herrmann@googlemail.com>
+L: linux-serial@vger.kernel.org
+S: Maintained
+F: drivers/video/console/fblog.c
+
FREESCALE DMA DRIVER
M: Li Yang <leoli@freescale.com>
M: Zhang Wei <zw@zh-kernel.org>
--
1.7.11.1
^ permalink raw reply related
* [PATCH v2 02/11] fbcon: move bit_putcs() into separate source file
From: David Herrmann @ 2012-07-08 21:56 UTC (permalink / raw)
To: linux-serial
Cc: linux-kernel, florianschandinat, linux-fbdev, gregkh, alan,
bonbons, David Herrmann
In-Reply-To: <1341784614-2797-1-git-send-email-dh.herrmann@googlemail.com>
If we want to use font-draw-operations in other modules than fbcon, we
need to split this function off of fbcon headers and sources. This also
makes bit_putcs() totally independent of vc_* and fbcon_* structures.
As scr_read() cannot be called inside of non-fbcon/vt functions, we need
to assemble the buffer before passing it to fbdraw_font(). This slows down
this operations a little bit but my rough benchmark showed that it didn't
really matter. Anyway, if it does, we can still put it into VT_BUF_HAVE_RW
conditions so platforms that don't use it won't be affected. And for other
platforms we can add the buffer to the vc-struct so we can reuse it.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
drivers/video/console/bitblit.c | 127 ++++------------------------------------
drivers/video/console/fbdraw.c | 125 +++++++++++++++++++++++++++++++++++++++
drivers/video/console/fbdraw.h | 4 ++
3 files changed, 139 insertions(+), 117 deletions(-)
diff --git a/drivers/video/console/bitblit.c b/drivers/video/console/bitblit.c
index 6ec2905..c5d897b 100644
--- a/drivers/video/console/bitblit.c
+++ b/drivers/video/console/bitblit.c
@@ -54,132 +54,25 @@ static void bit_clear(struct vc_data *vc, struct fb_info *info, int sy,
info->fbops->fb_fillrect(info, ®ion);
}
-static inline void bit_putcs_aligned(struct vc_data *vc, struct fb_info *info,
- const u16 *s, u32 attr, u32 cnt,
- u32 d_pitch, u32 s_pitch, u32 cellsize,
- struct fb_image *image, u8 *buf, u8 *dst)
-{
- u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
- u32 idx = vc->vc_font.width >> 3;
- u8 *src;
-
- while (cnt--) {
- src = vc->vc_font.data + (scr_readw(s++)&
- charmask)*cellsize;
-
- if (attr) {
- fbdraw_update_attr(buf, src, attr, &vc->vc_font);
- src = buf;
- }
-
- if (likely(idx == 1))
- __fb_pad_aligned_buffer(dst, d_pitch, src, idx,
- image->height);
- else
- fb_pad_aligned_buffer(dst, d_pitch, src, idx,
- image->height);
-
- dst += s_pitch;
- }
-
- info->fbops->fb_imageblit(info, image);
-}
-
-static inline void bit_putcs_unaligned(struct vc_data *vc,
- struct fb_info *info, const u16 *s,
- u32 attr, u32 cnt, u32 d_pitch,
- u32 s_pitch, u32 cellsize,
- struct fb_image *image, u8 *buf,
- u8 *dst)
-{
- u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
- u32 shift_low = 0, mod = vc->vc_font.width % 8;
- u32 shift_high = 8;
- u32 idx = vc->vc_font.width >> 3;
- u8 *src;
-
- while (cnt--) {
- src = vc->vc_font.data + (scr_readw(s++)&
- charmask)*cellsize;
-
- if (attr) {
- fbdraw_update_attr(buf, src, attr, &vc->vc_font);
- src = buf;
- }
-
- fb_pad_unaligned_buffer(dst, d_pitch, src, idx,
- image->height, shift_high,
- shift_low, mod);
- shift_low += mod;
- dst += (shift_low >= 8) ? s_pitch : s_pitch - 1;
- shift_low &= 7;
- shift_high = 8 - shift_low;
- }
-
- info->fbops->fb_imageblit(info, image);
-
-}
-
static void bit_putcs(struct vc_data *vc, struct fb_info *info,
const unsigned short *s, int count, int yy, int xx,
int fg, int bg)
{
- struct fb_image image;
- u32 width = DIV_ROUND_UP(vc->vc_font.width, 8);
- u32 cellsize = width * vc->vc_font.height;
- u32 maxcnt = info->pixmap.size/cellsize;
- u32 scan_align = info->pixmap.scan_align - 1;
- u32 buf_align = info->pixmap.buf_align - 1;
- u32 mod = vc->vc_font.width % 8, cnt, pitch, size;
+ u16 *buf;
+ int i;
u32 attribute = get_attribute(info, scr_readw(s));
- u8 *dst, *buf = NULL;
- image.fg_color = fg;
- image.bg_color = bg;
- image.dx = xx * vc->vc_font.width;
- image.dy = yy * vc->vc_font.height;
- image.height = vc->vc_font.height;
- image.depth = 1;
+ buf = kmalloc(sizeof(*buf) * count, GFP_KERNEL);
+ if (!buf)
+ return;
- if (attribute) {
- buf = kmalloc(cellsize, GFP_KERNEL);
- if (!buf)
- return;
- }
-
- while (count) {
- if (count > maxcnt)
- cnt = maxcnt;
- else
- cnt = count;
-
- image.width = vc->vc_font.width * cnt;
- pitch = DIV_ROUND_UP(image.width, 8) + scan_align;
- pitch &= ~scan_align;
- size = pitch * image.height + buf_align;
- size &= ~buf_align;
- dst = fb_get_buffer_offset(info, &info->pixmap, size);
- image.data = dst;
-
- if (!mod)
- bit_putcs_aligned(vc, info, s, attribute, cnt, pitch,
- width, cellsize, &image, buf, dst);
- else
- bit_putcs_unaligned(vc, info, s, attribute, cnt,
- pitch, width, cellsize, &image,
- buf, dst);
-
- image.dx += cnt * vc->vc_font.width;
- count -= cnt;
- s += cnt;
- }
+ for (i = 0; i < count; ++i)
+ buf[i] = scr_readw(s++);
- /* buf is always NULL except when in monochrome mode, so in this case
- it's a gain to check buf against NULL even though kfree() handles
- NULL pointers just fine */
- if (unlikely(buf))
- kfree(buf);
+ fbdraw_font(info, &vc->vc_font, vc->vc_hi_font_mask, xx, yy, fg, bg,
+ attribute, buf, count);
+ kfree(buf);
}
static void bit_clear_margins(struct vc_data *vc, struct fb_info *info,
diff --git a/drivers/video/console/fbdraw.c b/drivers/video/console/fbdraw.c
index 65e7003..e2e0661 100644
--- a/drivers/video/console/fbdraw.c
+++ b/drivers/video/console/fbdraw.c
@@ -41,6 +41,131 @@ void fbdraw_update_attr(u8 *dst, const u8 *src, int attribute,
}
EXPORT_SYMBOL(fbdraw_update_attr);
+static inline void bit_putcs_aligned(struct fb_info *info, bool hi_font,
+ struct console_font *font, u32 attribute,
+ u32 d_pitch, u32 s_pitch, u32 cellsize,
+ struct fb_image *image, u8 *buf, u8 *dst,
+ const u16 *chars, size_t cnt)
+{
+ u16 charmask = hi_font ? 0x1ff : 0xff;
+ u32 idx = font->width >> 3;
+ u8 *src;
+
+ while (cnt--) {
+ src = font->data + ((*chars++) & charmask) * cellsize;
+
+ if (attribute) {
+ fbdraw_update_attr(buf, src, attribute, font);
+ src = buf;
+ }
+
+ if (likely(idx == 1))
+ __fb_pad_aligned_buffer(dst, d_pitch, src, idx,
+ image->height);
+ else
+ fb_pad_aligned_buffer(dst, d_pitch, src, idx,
+ image->height);
+
+ dst += s_pitch;
+ }
+
+ info->fbops->fb_imageblit(info, image);
+}
+
+static inline void bit_putcs_unaligned(struct fb_info *info, bool hi_font,
+ struct console_font *font, u32 attribute,
+ u32 d_pitch, u32 s_pitch, u32 cellsize,
+ struct fb_image *image, u8 *buf, u8 *dst,
+ const u16 *chars, size_t cnt)
+{
+ u16 charmask = hi_font ? 0x1ff : 0xff;
+ u32 shift_low = 0, mod = font->width % 8;
+ u32 shift_high = 8;
+ u32 idx = font->width >> 3;
+ u8 *src;
+
+ while (cnt--) {
+ src = font->data + ((*chars++) & charmask) * cellsize;
+
+ if (attribute) {
+ fbdraw_update_attr(buf, src, attribute, font);
+ src = buf;
+ }
+
+ fb_pad_unaligned_buffer(dst, d_pitch, src, idx,
+ image->height, shift_high,
+ shift_low, mod);
+ shift_low += mod;
+ dst += (shift_low >= 8) ? s_pitch : s_pitch - 1;
+ shift_low &= 7;
+ shift_high = 8 - shift_low;
+ }
+
+ info->fbops->fb_imageblit(info, image);
+}
+
+void fbdraw_font(struct fb_info *info, struct console_font *font, bool hi_font,
+ unsigned int xpos, unsigned int ypos, int fg, int bg,
+ u32 attribute, const u16 *chars, size_t count)
+{
+ struct fb_image image;
+ u32 width = DIV_ROUND_UP(font->width, 8);
+ u32 cellsize = width * font->height;
+ u32 maxcnt = info->pixmap.size / cellsize;
+ u32 scan_align = info->pixmap.scan_align - 1;
+ u32 buf_align = info->pixmap.buf_align - 1;
+ u32 mod = font->width % 8, cnt, pitch, size;
+ u8 *dst, *buf = NULL;
+
+ image.fg_color = fg;
+ image.bg_color = bg;
+ image.dx = xpos * font->width;
+ image.dy = ypos * font->height;
+ image.height = font->height;
+ image.depth = 1;
+
+ if (attribute) {
+ buf = kmalloc(cellsize, GFP_KERNEL);
+ if (!buf)
+ return;
+ }
+
+ while (count) {
+ if (count > maxcnt)
+ cnt = maxcnt;
+ else
+ cnt = count;
+
+ image.width = font->width * cnt;
+ pitch = DIV_ROUND_UP(image.width, 8) + scan_align;
+ pitch &= ~scan_align;
+ size = pitch * image.height + buf_align;
+ size &= ~buf_align;
+ dst = fb_get_buffer_offset(info, &info->pixmap, size);
+ image.data = dst;
+
+ if (!mod)
+ bit_putcs_aligned(info, hi_font, font, attribute,
+ pitch, width, cellsize, &image, buf,
+ dst, chars, cnt);
+ else
+ bit_putcs_unaligned(info, hi_font, font, attribute,
+ pitch, width, cellsize, &image, buf,
+ dst, chars, cnt);
+
+ image.dx += cnt * font->width;
+ count -= cnt;
+ chars += cnt;
+ }
+
+ /* buf is always NULL except when in monochrome mode, so in this case
+ it's a gain to check buf against NULL even though kfree() handles
+ NULL pointers just fine */
+ if (unlikely(buf))
+ kfree(buf);
+}
+EXPORT_SYMBOL(fbdraw_font);
+
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("David Herrmann <dh.herrmann@googlemail.com>");
MODULE_DESCRIPTION("Framebuffer helpers for image draw-operations");
diff --git a/drivers/video/console/fbdraw.h b/drivers/video/console/fbdraw.h
index 77edd7f..b9f1ffa 100644
--- a/drivers/video/console/fbdraw.h
+++ b/drivers/video/console/fbdraw.h
@@ -23,4 +23,8 @@
void fbdraw_update_attr(u8 *dst, const u8 *src, int attribute,
struct console_font *font);
+void fbdraw_font(struct fb_info *info, struct console_font *font, bool hi_font,
+ unsigned int xpos, unsigned int ypos, int fg, int bg,
+ u32 attribute, const u16 *chars, size_t count);
+
#endif /* _VIDEO_FBDRAW_H */
--
1.7.11.1
^ permalink raw reply related
* [PATCH v2 01/11] fbcon: move update_attr() into separate source file
From: David Herrmann @ 2012-07-08 21:56 UTC (permalink / raw)
To: linux-serial
Cc: linux-kernel, florianschandinat, linux-fbdev, gregkh, alan,
bonbons, David Herrmann
In-Reply-To: <1341784614-2797-1-git-send-email-dh.herrmann@googlemail.com>
If we want to use update_attr() independently from fbcon, we need to split
it off from bitblit.c and fbcon.h. Therefore, introduce a new header and
source file (fbdraw.[ch]) which does not depende on vc_* and fbcon_*
structures in any way.
This does not introduce any new code nor does it make the paths deeper,
it simply splits the function off.
The other update_attr() functions (inside the rotation sources) seem
similar but are significantly different and I haven't found a way to merge
them efficiently (which is probably the reason why they are split off
now). Furthermore, I do not intend to use them in the coming code so there
is no need to split them off.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
drivers/video/console/Makefile | 3 ++-
drivers/video/console/bitblit.c | 26 +++--------------------
drivers/video/console/fbcon.h | 5 +----
drivers/video/console/fbdraw.c | 46 +++++++++++++++++++++++++++++++++++++++++
drivers/video/console/fbdraw.h | 26 +++++++++++++++++++++++
5 files changed, 78 insertions(+), 28 deletions(-)
create mode 100644 drivers/video/console/fbdraw.c
create mode 100644 drivers/video/console/fbdraw.h
diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile
index a862e91..9a52226 100644
--- a/drivers/video/console/Makefile
+++ b/drivers/video/console/Makefile
@@ -25,7 +25,8 @@ obj-$(CONFIG_SGI_NEWPORT_CONSOLE) += newport_con.o font.o
obj-$(CONFIG_STI_CONSOLE) += sticon.o sticore.o font.o
obj-$(CONFIG_VGA_CONSOLE) += vgacon.o
obj-$(CONFIG_MDA_CONSOLE) += mdacon.o
-obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += fbcon.o bitblit.o font.o softcursor.o
+obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += fbcon.o bitblit.o font.o softcursor.o \
+ fbdraw.o
ifeq ($(CONFIG_FB_TILEBLITTING),y)
obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += tileblit.o
endif
diff --git a/drivers/video/console/bitblit.c b/drivers/video/console/bitblit.c
index 28b1a83..6ec2905 100644
--- a/drivers/video/console/bitblit.c
+++ b/drivers/video/console/bitblit.c
@@ -22,26 +22,6 @@
/*
* Accelerated handlers.
*/
-static void update_attr(u8 *dst, u8 *src, int attribute,
- struct vc_data *vc)
-{
- int i, offset = (vc->vc_font.height < 10) ? 1 : 2;
- int width = DIV_ROUND_UP(vc->vc_font.width, 8);
- unsigned int cellsize = vc->vc_font.height * width;
- u8 c;
-
- offset = cellsize - (offset * width);
- for (i = 0; i < cellsize; i++) {
- c = src[i];
- if (attribute & FBCON_ATTRIBUTE_UNDERLINE && i >= offset)
- c = 0xff;
- if (attribute & FBCON_ATTRIBUTE_BOLD)
- c |= c >> 1;
- if (attribute & FBCON_ATTRIBUTE_REVERSE)
- c = ~c;
- dst[i] = c;
- }
-}
static void bit_bmove(struct vc_data *vc, struct fb_info *info, int sy,
int sx, int dy, int dx, int height, int width)
@@ -88,7 +68,7 @@ static inline void bit_putcs_aligned(struct vc_data *vc, struct fb_info *info,
charmask)*cellsize;
if (attr) {
- update_attr(buf, src, attr, vc);
+ fbdraw_update_attr(buf, src, attr, &vc->vc_font);
src = buf;
}
@@ -123,7 +103,7 @@ static inline void bit_putcs_unaligned(struct vc_data *vc,
charmask)*cellsize;
if (attr) {
- update_attr(buf, src, attr, vc);
+ fbdraw_update_attr(buf, src, attr, &vc->vc_font);
src = buf;
}
@@ -275,7 +255,7 @@ static void bit_cursor(struct vc_data *vc, struct fb_info *info, int mode,
return;
kfree(ops->cursor_data);
ops->cursor_data = dst;
- update_attr(dst, src, attribute, vc);
+ fbdraw_update_attr(dst, src, attribute, &vc->vc_font);
src = dst;
}
diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h
index 6bd2e0c..8623bac 100644
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -16,6 +16,7 @@
#include <linux/vt_kern.h>
#include <asm/io.h>
+#include "fbdraw.h"
#define FBCON_FLAGS_INIT 1
#define FBCON_FLAGS_CURSOR_TIMER 2
@@ -219,10 +220,6 @@ extern void fbcon_set_tileops(struct vc_data *vc, struct fb_info *info);
extern void fbcon_set_bitops(struct fbcon_ops *ops);
extern int soft_cursor(struct fb_info *info, struct fb_cursor *cursor);
-#define FBCON_ATTRIBUTE_UNDERLINE 1
-#define FBCON_ATTRIBUTE_REVERSE 2
-#define FBCON_ATTRIBUTE_BOLD 4
-
static inline int real_y(struct display *p, int ypos)
{
int rows = p->vrows;
diff --git a/drivers/video/console/fbdraw.c b/drivers/video/console/fbdraw.c
new file mode 100644
index 0000000..65e7003
--- /dev/null
+++ b/drivers/video/console/fbdraw.c
@@ -0,0 +1,46 @@
+/*
+ * Framebuffer helpers for image draw-operations
+ *
+ * Copyright (c) 2004 Antonino Daplas <adaplas @pol.net>
+ * Copyright (c) 2012 David Herrmann <dh.herrmann@googlemail.com>
+ *
+ * Originally from drivers/video/console/bitblit.c which itself originally is
+ * from the 'accel_*' routines in drivers/video/console/fbcon.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/console.h>
+#include <linux/fb.h>
+#include <linux/kd.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include "fbdraw.h"
+
+void fbdraw_update_attr(u8 *dst, const u8 *src, int attribute,
+ struct console_font *font)
+{
+ int i, offset = (font->height < 10) ? 1 : 2;
+ int width = DIV_ROUND_UP(font->width, 8);
+ unsigned int cellsize = font->height * width;
+ u8 c;
+
+ offset = cellsize - (offset * width);
+ for (i = 0; i < cellsize; i++) {
+ c = src[i];
+ if (attribute & FBCON_ATTRIBUTE_UNDERLINE && i >= offset)
+ c = 0xff;
+ if (attribute & FBCON_ATTRIBUTE_BOLD)
+ c |= c >> 1;
+ if (attribute & FBCON_ATTRIBUTE_REVERSE)
+ c = ~c;
+ dst[i] = c;
+ }
+}
+EXPORT_SYMBOL(fbdraw_update_attr);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("David Herrmann <dh.herrmann@googlemail.com>");
+MODULE_DESCRIPTION("Framebuffer helpers for image draw-operations");
diff --git a/drivers/video/console/fbdraw.h b/drivers/video/console/fbdraw.h
new file mode 100644
index 0000000..77edd7f
--- /dev/null
+++ b/drivers/video/console/fbdraw.h
@@ -0,0 +1,26 @@
+/*
+ * Framebuffer helpers for image draw-operations
+ *
+ * Copyright (c) 2012 David Herrmann <dh.herrmann@googlemail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef _VIDEO_FBDRAW_H
+#define _VIDEO_FBDRAW_H
+
+#include <linux/console.h>
+#include <linux/fb.h>
+#include <linux/kd.h>
+
+/* fbcon character attributes */
+#define FBCON_ATTRIBUTE_UNDERLINE 1
+#define FBCON_ATTRIBUTE_REVERSE 2
+#define FBCON_ATTRIBUTE_BOLD 4
+
+void fbdraw_update_attr(u8 *dst, const u8 *src, int attribute,
+ struct console_font *font);
+
+#endif /* _VIDEO_FBDRAW_H */
--
1.7.11.1
^ permalink raw reply related
* [PATCH v2 10/11] fblog: draw console to framebuffers
From: David Herrmann @ 2012-07-08 21:56 UTC (permalink / raw)
To: linux-serial
Cc: linux-kernel, florianschandinat, linux-fbdev, gregkh, alan,
bonbons, David Herrmann
In-Reply-To: <1341784614-2797-1-git-send-email-dh.herrmann@googlemail.com>
If not disabled or suspended, we now blit the console data to each
framebuffer. We only redraw on changes to avoid consuming too much CPU
power.
This isn't optimized for speed, currently. However, fblog is mainly used
for debugging purposes so this can be optimized later.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
drivers/video/console/fblog.c | 107 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 106 insertions(+), 1 deletion(-)
diff --git a/drivers/video/console/fblog.c b/drivers/video/console/fblog.c
index e447f98..d6e4fe2 100644
--- a/drivers/video/console/fblog.c
+++ b/drivers/video/console/fblog.c
@@ -26,8 +26,11 @@
#include <linux/console.h>
#include <linux/device.h>
#include <linux/fb.h>
+#include <linux/font.h>
+#include <linux/kd.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include "fbdraw.h"
/**
* struct fblog_buf: Console text buffer
@@ -64,6 +67,7 @@ struct fblog_fb {
struct device dev;
struct mutex lock;
struct fblog_buf buf;
+ struct console_font font;
};
static DEFINE_MUTEX(fblog_registration_lock);
@@ -173,9 +177,65 @@ static void fblog_buf_write(struct fblog_buf *buf, const char *str, size_t len)
}
}
+static void fblog_redraw_clear(struct fblog_fb *fb)
+{
+ struct fb_fillrect region;
+ struct fb_info *info = fb->info;
+
+ region.color = 0;
+ region.dx = 0;
+ region.dy = 0;
+ region.width = info->var.xres;
+ region.height = info->var.yres;
+ region.rop = ROP_COPY;
+
+ info->fbops->fb_fillrect(info, ®ion);
+}
+
+static void fblog_redraw(struct fblog_fb *fb)
+{
+ size_t i;
+
+ mutex_lock(&fb->lock);
+ if (!test_bit(FBLOG_OPEN, &fb->flags) ||
+ test_bit(FBLOG_SUSPENDED, &fb->flags) ||
+ test_bit(FBLOG_BLANKED, &fb->flags)) {
+ mutex_unlock(&fb->lock);
+ return;
+ }
+
+ fblog_redraw_clear(fb);
+
+ for (i = 0; i < fb->buf.height; ++i) {
+ fbdraw_font(fb->info, &fb->font, false, 0, i, 7, 0, 0,
+ fb->buf.lines[i], fb->buf.width);
+ }
+
+ mutex_unlock(&fb->lock);
+}
+
+static void fblog_refresh(struct fblog_fb *fb)
+{
+ unsigned int width, height;
+
+ mutex_lock(&fb->lock);
+ if (test_bit(FBLOG_OPEN, &fb->flags)) {
+ width = fb->info->var.xres / fb->font.width;
+ height = fb->info->var.yres / fb->font.height;
+ fblog_buf_resize(&fb->buf, width, height);
+ }
+ mutex_unlock(&fb->lock);
+
+ fblog_redraw(fb);
+}
+
static int fblog_open(struct fblog_fb *fb, bool locked)
{
int ret;
+ struct fb_var_screeninfo var;
+ const struct fb_videomode *mode;
+ unsigned int width, height;
+ const struct font_desc *font;
mutex_lock(&fb->lock);
@@ -189,6 +249,13 @@ static int fblog_open(struct fblog_fb *fb, bool locked)
goto unlock;
}
+ font = get_default_font(var.xres, var.yres, fb->info->pixmap.blit_x,
+ fb->info->pixmap.blit_y);
+ if (!font) {
+ ret = -ENODEV;
+ goto unlock;
+ }
+
if (!locked)
mutex_lock(&fb->info->lock);
@@ -202,13 +269,25 @@ static int fblog_open(struct fblog_fb *fb, bool locked)
goto out_unref;
}
+ var = fb->info->var;
+ mode = fb_find_best_mode(&var, &fb->info->modelist);
+ var.activate = FB_ACTIVATE_NOW | FB_ACTIVATE_FORCE;
+ fb_set_var(fb->info, &var);
+
+ fb->font.width = font->width;
+ fb->font.height = font->height;
+ fb->font.data = (void*)font->data;
+
if (!locked)
mutex_unlock(&fb->info->lock);
- fblog_buf_resize(&fb->buf, 80, 24);
+ width = var.xres / fb->font.width;
+ height = var.yres / fb->font.height;
+ fblog_buf_resize(&fb->buf, width, height);
fblog_buf_write(&fb->buf, FBLOG_STR("Framebuffer log initialized\n"));
set_bit(FBLOG_OPEN, &fb->flags);
mutex_unlock(&fb->lock);
+ fblog_redraw(fb);
return 0;
out_unref:
@@ -449,6 +528,31 @@ static int fblog_event(struct notifier_block *self, unsigned long action,
else
set_bit(FBLOG_BLANKED, &fb->flags);
break;
+ case FB_EVENT_MODE_DELETE:
+ /* This is sent when a video mode is removed. The current video
+ * mode is never removed! The console lock is held while this is
+ * called. */
+ /* fallthrough */
+ case FB_EVENT_NEW_MODELIST:
+ /* This is sent when the modelist got changed. The console-lock
+ * is held and we should reset the mode. */
+ /* fallthrough */
+ case FB_EVENT_MODE_CHANGE_ALL:
+ /* This is the same as below but notifies us that the user used
+ * the FB_ACTIVATE_ALL flag when setting the video mode. */
+ /* fallthrough */
+ case FB_EVENT_MODE_CHANGE:
+ /* This is called when the _user_ changes the video mode via
+ * ioctls. It is not sent, when the kernel changes the mode
+ * internally. This callback is called inside fb_set_var() so
+ * the console lock is held. */
+ mutex_lock(&fblog_registration_lock);
+ fb = fblog_fbs[info->node];
+ mutex_unlock(&fblog_registration_lock);
+
+ if (fb)
+ fblog_refresh(fb);
+ break;
}
return 0;
@@ -505,6 +609,7 @@ static void fblog_con_write(struct console *con, const char *buf,
for (i = 0; i < FB_MAX; ++i) {
if (fblog_fbs[i]) {
fblog_buf_write(&fblog_fbs[i]->buf, buf, len);
+ fblog_redraw(fblog_fbs[i]);
}
}
mutex_unlock(&fblog_registration_lock);
--
1.7.11.1
^ permalink raw reply related
* [PATCH v2 09/11] fblog: register console driver
From: David Herrmann @ 2012-07-08 21:56 UTC (permalink / raw)
To: linux-serial
Cc: linux-kernel, florianschandinat, linux-fbdev, gregkh, alan,
bonbons, David Herrmann
In-Reply-To: <1341784614-2797-1-git-send-email-dh.herrmann@googlemail.com>
We want to print the kernel log to all FBs so we need a console driver.
This registers the driver on startup and writes all messages to all
registered fblog instances.
We cannot share a console buffer between FBs because they might have
different resolutions. Therefore, we create one buffer per object. We
destroy the buffer during close() so we do not waste memory if it is not
used.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
drivers/video/console/fblog.c | 150 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 150 insertions(+)
diff --git a/drivers/video/console/fblog.c b/drivers/video/console/fblog.c
index fd1f3d6..e447f98 100644
--- a/drivers/video/console/fblog.c
+++ b/drivers/video/console/fblog.c
@@ -23,11 +23,34 @@
* all fblog instances before running other graphics applications.
*/
+#include <linux/console.h>
#include <linux/device.h>
#include <linux/fb.h>
#include <linux/module.h>
#include <linux/mutex.h>
+/**
+ * struct fblog_buf: Console text buffer
+ *
+ * Each framebuffer has its own text buffer which contains all characters that
+ * are currently printed on screen. The buffers might have different sizes and
+ * can be resized during runtime. When the buffer content changes, we redraw the
+ * screen.
+ *
+ * width: Width of buffer in characters
+ * height: Height of buffer in characters
+ * lines: Array of lines
+ * pos_x: Cursor x-position
+ * pos_y: Cursor y-position
+ */
+struct fblog_buf {
+ size_t width;
+ size_t height;
+ u16 **lines;
+ size_t pos_x;
+ size_t pos_y;
+};
+
enum fblog_flags {
FBLOG_KILLED,
FBLOG_OPEN,
@@ -40,6 +63,7 @@ struct fblog_fb {
struct fb_info *info;
struct device dev;
struct mutex lock;
+ struct fblog_buf buf;
};
static DEFINE_MUTEX(fblog_registration_lock);
@@ -47,6 +71,107 @@ static struct fblog_fb *fblog_fbs[FB_MAX];
static bool active = 1;
#define to_fblog_dev(_d) container_of(_d, struct fblog_fb, dev)
+#define FBLOG_STR(x) x, sizeof(x) - 1
+
+static void fblog_buf_resize(struct fblog_buf *buf, size_t width,
+ size_t height)
+{
+ u16 **lines = NULL;
+ size_t i, j, minw, minh;
+
+ if (buf->height == height && buf->width == width)
+ return;
+
+ if (width && height) {
+ lines = kzalloc(height * sizeof(char*), GFP_KERNEL);
+ if (!lines)
+ return;
+
+ for (i = 0; i < height; ++i) {
+ lines[i] = kzalloc(width * sizeof(u16), GFP_KERNEL);
+ if (!lines[i]) {
+ while (i--)
+ kfree(lines[i]);
+ return;
+ }
+ }
+
+ /* copy old lines */
+ minw = min(width, buf->width);
+ minh = min(height, buf->height);
+ if (height >= buf->height)
+ i = 0;
+ else
+ i = buf->height - height;
+
+ for (j = 0; j < minh; ++i, ++j)
+ memcpy(lines[j], buf->lines[i], minw * sizeof(u16));
+ } else {
+ width = 0;
+ height = 0;
+ }
+
+ for (i = 0; i < buf->height; ++i)
+ kfree(buf->lines[i]);
+ kfree(buf->lines);
+
+ buf->lines = lines;
+ buf->width = width;
+ buf->height = height;
+}
+
+static void fblog_buf_deinit(struct fblog_buf *buf)
+{
+ fblog_buf_resize(buf, 0, 0);
+}
+
+static void fblog_buf_rotate(struct fblog_buf *buf)
+{
+ u16 *line;
+
+ if (!buf->height)
+ return;
+
+ line = buf->lines[0];
+ memset(line, 0, sizeof(u16) * buf->width);
+
+ memmove(buf->lines, &buf->lines[1], sizeof(char*) * (buf->height - 1));
+ buf->lines[buf->height - 1] = line;
+}
+
+static void fblog_buf_write(struct fblog_buf *buf, const char *str, size_t len)
+{
+ char c;
+
+ if (!buf->height)
+ return;
+
+ while (len--) {
+ c = *str++;
+
+ if (c == 0)
+ c = '?';
+
+ if (c == '\n') {
+ buf->pos_x = 0;
+ if (++buf->pos_y >= buf->height) {
+ buf->pos_y = buf->height - 1;
+ fblog_buf_rotate(buf);
+ }
+ } else {
+ if (buf->pos_x >= buf->width) {
+ buf->pos_x = 0;
+ ++buf->pos_y;
+ }
+ if (buf->pos_y >= buf->height) {
+ buf->pos_y = buf->height - 1;
+ fblog_buf_rotate(buf);
+ }
+
+ buf->lines[buf->pos_y][buf->pos_x++] = c;
+ }
+ }
+}
static int fblog_open(struct fblog_fb *fb, bool locked)
{
@@ -80,6 +205,8 @@ static int fblog_open(struct fblog_fb *fb, bool locked)
if (!locked)
mutex_unlock(&fb->info->lock);
+ fblog_buf_resize(&fb->buf, 80, 24);
+ fblog_buf_write(&fb->buf, FBLOG_STR("Framebuffer log initialized\n"));
set_bit(FBLOG_OPEN, &fb->flags);
mutex_unlock(&fb->lock);
return 0;
@@ -111,6 +238,7 @@ static void fblog_close(struct fblog_fb *fb, bool kill_dev, bool locked)
mutex_unlock(&fb->info->lock);
clear_bit(FBLOG_OPEN, &fb->flags);
+ fblog_buf_deinit(&fb->buf);
}
if (kill_dev)
@@ -368,6 +496,26 @@ static struct notifier_block fblog_notifier = {
.notifier_call = fblog_event,
};
+static void fblog_con_write(struct console *con, const char *buf,
+ unsigned int len)
+{
+ int i;
+
+ mutex_lock(&fblog_registration_lock);
+ for (i = 0; i < FB_MAX; ++i) {
+ if (fblog_fbs[i]) {
+ fblog_buf_write(&fblog_fbs[i]->buf, buf, len);
+ }
+ }
+ mutex_unlock(&fblog_registration_lock);
+}
+
+static struct console fblog_con_driver = {
+ .name = "fblog",
+ .write = fblog_con_write,
+ .flags = CON_PRINTBUFFER | CON_ENABLED,
+};
+
static int __init fblog_init(void)
{
int ret;
@@ -379,6 +527,7 @@ static int __init fblog_init(void)
}
fblog_scan();
+ register_console(&fblog_con_driver);
return 0;
}
@@ -388,6 +537,7 @@ static void __exit fblog_exit(void)
unsigned int i;
struct fb_info *info;
+ unregister_console(&fblog_con_driver);
fb_unregister_client(&fblog_notifier);
for (i = 0; i < FB_MAX; ++i) {
--
1.7.11.1
^ permalink raw reply related
* [PATCH v2 00/11] fblog: framebuffer kernel log driver
From: David Herrmann @ 2012-07-08 21:56 UTC (permalink / raw)
To: linux-serial
Cc: linux-kernel, florianschandinat, linux-fbdev, gregkh, alan,
bonbons, David Herrmann
Hi
This is version 2 of the fblog driver. The fblog driver allows showing the
kernel console on all available framebuffers. It's a replacement for CONFIG_VT
and fbcon that is much, much smaller and simpler. It should be used for
debugging purposes only, therefore, it is currently not optimized for speed.
Three patches extract update_attr(), bit_putcs() and get/put_fb_info() so they
can be used from fblog, the other patches actually implement fblog.
Version 2 addresses the issues from the last series. I extracted bit_putcs()
into fbdraw_font() so we have a single function shared between fbcon and fblog
to draw text. Furthermore, I reworked the framebuffer-registration logic inside
of fblog so there shouldn't be any more races with fbmem.c fb registration.
There is also a new configuration parameter that allows enabling fblog only on
specific framebuffers as requested from several people.
I also redid the whole patch-split so it should be much easier to follow. I am
using this driver on my x86_64 machine without any problems. If you remove the
"!VT" line in Kconfig then this can even be used with VTs enabled (even though
this is kind of racy between fbcon and fblog, obviously). Unloading the module
still has to be done with "rmmod -f fblog" as we still have a reference to our
own module. I haven't found a way to avoid this.
The reason why I wrote this driver is to make CONFIG_VT obsolete. This way I can
drop a lot of code from the kernel and make it much smaller. In combination with
user-space terminals like "kmscon" there is actually no need for in-kernel
terminals anymore.
This patchset is built based on linux-next as I have no idea whose tree this is
going through.
Feedback is appreciated.
Regards
David
David Herrmann (11):
fbcon: move update_attr() into separate source file
fbcon: move bit_putcs() into separate source file
fblog: new framebuffer kernel log dummy driver
fbdev: export get_fb_info()/put_fb_info()
fblog: register one fblog object per framebuffer
fblog: open fb on registration
fblog: allow selecting fbs via sysfs
fblog: cache framebuffer BLANK and SUSPEND states
fblog: register console driver
fblog: draw console to framebuffers
MAINTAINERS: add fblog entry
MAINTAINERS | 6 +
drivers/video/Kconfig | 5 +-
drivers/video/Makefile | 2 +-
drivers/video/console/Kconfig | 37 ++-
drivers/video/console/Makefile | 4 +-
drivers/video/console/bitblit.c | 149 +--------
drivers/video/console/fbcon.h | 5 +-
drivers/video/console/fbdraw.c | 171 +++++++++++
drivers/video/console/fbdraw.h | 30 ++
drivers/video/console/fblog.c | 665 ++++++++++++++++++++++++++++++++++++++++
drivers/video/fbmem.c | 6 +-
include/linux/fb.h | 3 +
12 files changed, 925 insertions(+), 158 deletions(-)
create mode 100644 drivers/video/console/fbdraw.c
create mode 100644 drivers/video/console/fbdraw.h
create mode 100644 drivers/video/console/fblog.c
--
1.7.11.1
^ permalink raw reply
* [PATCH v2 08/11] fblog: cache framebuffer BLANK and SUSPEND states
From: David Herrmann @ 2012-07-08 21:56 UTC (permalink / raw)
To: linux-serial
Cc: linux-kernel, florianschandinat, linux-fbdev, gregkh, alan,
bonbons, David Herrmann
In-Reply-To: <1341784614-2797-1-git-send-email-dh.herrmann@googlemail.com>
We must cache these states so we will never draw to the framebuffer while
it is suspended or blanked.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
drivers/video/console/fblog.c | 41 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/drivers/video/console/fblog.c b/drivers/video/console/fblog.c
index b490dba..fd1f3d6 100644
--- a/drivers/video/console/fblog.c
+++ b/drivers/video/console/fblog.c
@@ -31,6 +31,8 @@
enum fblog_flags {
FBLOG_KILLED,
FBLOG_OPEN,
+ FBLOG_SUSPENDED,
+ FBLOG_BLANKED,
};
struct fblog_fb {
@@ -255,6 +257,7 @@ static int fblog_event(struct notifier_block *self, unsigned long action,
struct fb_event *event = data;
struct fb_info *info = event->info;
struct fblog_fb *fb;
+ int *blank;
switch(action) {
case FB_EVENT_FB_REGISTERED:
@@ -280,6 +283,44 @@ static int fblog_event(struct notifier_block *self, unsigned long action,
if (fb)
fblog_close(fb, true, true);
break;
+ case FB_EVENT_SUSPEND:
+ /* This is called when the low-level display driver suspends the
+ * video system. We should not access the video system while it
+ * is suspended. This is called with the console lock held. */
+ mutex_lock(&fblog_registration_lock);
+ fb = fblog_fbs[info->node];
+ mutex_unlock(&fblog_registration_lock);
+
+ if (fb)
+ set_bit(FBLOG_SUSPENDED, &fb->flags);
+ break;
+ case FB_EVENT_RESUME:
+ /* This is called when the low-level display driver resumes
+ * operating. It is called with the console lock held. */
+ mutex_lock(&fblog_registration_lock);
+ fb = fblog_fbs[info->node];
+ mutex_unlock(&fblog_registration_lock);
+
+ if (fb)
+ clear_bit(FBLOG_SUSPENDED, &fb->flags);
+ break;
+ case FB_EVENT_BLANK:
+ /* This gets called _after_ the framebuffer was successfully
+ * blanked. The console-lock is always held while fb_blank is
+ * called and during this callback. */
+ mutex_lock(&fblog_registration_lock);
+ fb = fblog_fbs[info->node];
+ mutex_unlock(&fblog_registration_lock);
+
+ if (!fb)
+ break;
+
+ blank = (int*)event->data;
+ if (*blank == FB_BLANK_UNBLANK)
+ clear_bit(FBLOG_BLANKED, &fb->flags);
+ else
+ set_bit(FBLOG_BLANKED, &fb->flags);
+ break;
}
return 0;
--
1.7.11.1
^ permalink raw reply related
* [PATCH v2 06/11] fblog: open fb on registration
From: David Herrmann @ 2012-07-08 21:56 UTC (permalink / raw)
To: linux-serial
Cc: linux-kernel, florianschandinat, linux-fbdev, gregkh, alan,
bonbons, David Herrmann
In-Reply-To: <1341784614-2797-1-git-send-email-dh.herrmann@googlemail.com>
This opens the framebuffer upon registration so we can use it for
drawing-operations. On unregistration we close it again.
To avoid deadlocks, we need to tell fblog_open/close() whether the
framebuffer is currently locked. This is because some fb-notifiers are
called with the lock held and others without it. We cannot release it in
the notifier as this might confuse other registered callbacks if they
actually depend on the lock to be continously held (such a callback is
currently no available in the kernel, but may be added some time later).
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
drivers/video/console/fblog.c | 91 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 91 insertions(+)
diff --git a/drivers/video/console/fblog.c b/drivers/video/console/fblog.c
index 3e0b471..113be36 100644
--- a/drivers/video/console/fblog.c
+++ b/drivers/video/console/fblog.c
@@ -30,12 +30,14 @@
enum fblog_flags {
FBLOG_KILLED,
+ FBLOG_OPEN,
};
struct fblog_fb {
unsigned long flags;
struct fb_info *info;
struct device dev;
+ struct mutex lock;
};
static DEFINE_MUTEX(fblog_registration_lock);
@@ -43,6 +45,77 @@ static struct fblog_fb *fblog_fbs[FB_MAX];
#define to_fblog_dev(_d) container_of(_d, struct fblog_fb, dev)
+static int fblog_open(struct fblog_fb *fb, bool locked)
+{
+ int ret;
+
+ mutex_lock(&fb->lock);
+
+ if (test_bit(FBLOG_KILLED, &fb->flags)) {
+ ret = -ENODEV;
+ goto unlock;
+ }
+
+ if (test_bit(FBLOG_OPEN, &fb->flags)) {
+ ret = 0;
+ goto unlock;
+ }
+
+ if (!locked)
+ mutex_lock(&fb->info->lock);
+
+ if (!try_module_get(fb->info->fbops->owner)) {
+ ret = -ENODEV;
+ goto out_killed;
+ }
+
+ if (fb->info->fbops->fb_open && fb->info->fbops->fb_open(fb->info, 0)) {
+ ret = -EIO;
+ goto out_unref;
+ }
+
+ if (!locked)
+ mutex_unlock(&fb->info->lock);
+
+ set_bit(FBLOG_OPEN, &fb->flags);
+ mutex_unlock(&fb->lock);
+ return 0;
+
+out_unref:
+ module_put(fb->info->fbops->owner);
+out_killed:
+ if (!locked)
+ mutex_unlock(&fb->info->lock);
+ set_bit(FBLOG_KILLED, &fb->flags);
+unlock:
+ mutex_unlock(&fb->lock);
+ return ret;
+}
+
+static void fblog_close(struct fblog_fb *fb, bool kill_dev, bool locked)
+{
+ mutex_lock(&fb->lock);
+
+ if (test_bit(FBLOG_OPEN, &fb->flags)) {
+ if (!locked)
+ mutex_lock(&fb->info->lock);
+
+ if (fb->info->fbops->fb_release)
+ fb->info->fbops->fb_release(fb->info, 0);
+ module_put(fb->info->fbops->owner);
+
+ if (!locked)
+ mutex_unlock(&fb->info->lock);
+
+ clear_bit(FBLOG_OPEN, &fb->flags);
+ }
+
+ if (kill_dev)
+ set_bit(FBLOG_KILLED, &fb->flags);
+
+ mutex_unlock(&fb->lock);
+}
+
/*
* fblog framebuffer list
* The fblog_fbs[] array contains all currently registered framebuffers. If a
@@ -75,6 +148,7 @@ static void fblog_do_unregister(struct fb_info *info)
fblog_fbs[info->node] = NULL;
+ fblog_close(fb, true, false);
device_del(&fb->dev);
put_device(&fb->dev);
}
@@ -97,6 +171,7 @@ static void fblog_do_register(struct fb_info *info, bool force)
return;
fb->info = info;
+ mutex_init(&fb->lock);
__module_get(THIS_MODULE);
device_initialize(&fb->dev);
fb->dev.class = fb_class;
@@ -111,6 +186,8 @@ static void fblog_do_register(struct fb_info *info, bool force)
put_device(&fb->dev);
return;
}
+
+ fblog_open(fb, true);
}
static void fblog_register(struct fb_info *info, bool force)
@@ -132,6 +209,7 @@ static int fblog_event(struct notifier_block *self, unsigned long action,
{
struct fb_event *event = data;
struct fb_info *info = event->info;
+ struct fblog_fb *fb;
switch(action) {
case FB_EVENT_FB_REGISTERED:
@@ -146,6 +224,17 @@ static int fblog_event(struct notifier_block *self, unsigned long action,
* lock might not be held. */
fblog_unregister(info);
break;
+ case FB_EVENT_FB_UNBIND:
+ /* Called directly before unregistering an FB. The FB is still
+ * valid here and the registration lock is held but the console
+ * lock might not be held (really?). */
+ mutex_lock(&fblog_registration_lock);
+ fb = fblog_fbs[info->node];
+ mutex_unlock(&fblog_registration_lock);
+
+ if (fb)
+ fblog_close(fb, true, true);
+ break;
}
return 0;
@@ -161,7 +250,9 @@ static void fblog_scan(void)
if (!info || IS_ERR(info))
continue;
+ mutex_lock(&info->lock);
fblog_register(info, false);
+ mutex_unlock(&info->lock);
/* There is a very subtle race-condition. Even though we might
* own a reference to the fb, it may still get unregistered
--
1.7.11.1
^ permalink raw reply related
* [PATCH v2 05/11] fblog: register one fblog object per framebuffer
From: David Herrmann @ 2012-07-08 21:56 UTC (permalink / raw)
To: linux-serial
Cc: linux-kernel, florianschandinat, linux-fbdev, gregkh, alan,
bonbons, David Herrmann
In-Reply-To: <1341784614-2797-1-git-send-email-dh.herrmann@googlemail.com>
One fblog object is associated to each registered framebuffer. This way,
we can draw the console to each framebuffer. When a framebuffer driver
unregisters a framebuffer, we also unregister our fblog object. That is,
our lifetime is coupled to the lifetime of the framebuffer. However, this
does not mean that we are always active. On the contrary, we do not even
own a reference to the framebuffer. We don't need it as we are notified
_before_ the last reference is dropped.
However, if other users have a reference to our object, we simply mark it
as dead when the associated framebuffer dies and leave it alone. When the
last reference is dropped, it will be automatically freed.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
drivers/video/console/fblog.c | 189 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 189 insertions(+)
diff --git a/drivers/video/console/fblog.c b/drivers/video/console/fblog.c
index fb39737..3e0b471 100644
--- a/drivers/video/console/fblog.c
+++ b/drivers/video/console/fblog.c
@@ -23,15 +23,204 @@
* all fblog instances before running other graphics applications.
*/
+#include <linux/device.h>
+#include <linux/fb.h>
#include <linux/module.h>
+#include <linux/mutex.h>
+
+enum fblog_flags {
+ FBLOG_KILLED,
+};
+
+struct fblog_fb {
+ unsigned long flags;
+ struct fb_info *info;
+ struct device dev;
+};
+
+static DEFINE_MUTEX(fblog_registration_lock);
+static struct fblog_fb *fblog_fbs[FB_MAX];
+
+#define to_fblog_dev(_d) container_of(_d, struct fblog_fb, dev)
+
+/*
+ * fblog framebuffer list
+ * The fblog_fbs[] array contains all currently registered framebuffers. If a
+ * framebuffer is in that list, we always must make sure that we own a reference
+ * to it. If it is added through the notifier callbacks, then this is always
+ * guaranteed.
+ * We are only interested in registered framebuffers. That is, if a driver calls
+ * unregister_framebuffer() we directly unlink it from our list. This guarantees
+ * that the associated fb_info is always valid. However, we might still have
+ * pending users so we mark it as dead so no further framebuffer actions are
+ * done. If the last user then drops a reference, the memory gets freed
+ * automatically.
+ */
+
+static void fblog_release(struct device *dev)
+{
+ struct fblog_fb *fb = to_fblog_dev(dev);
+
+ kfree(fb);
+ module_put(THIS_MODULE);
+}
+
+static void fblog_do_unregister(struct fb_info *info)
+{
+ struct fblog_fb *fb;
+
+ fb = fblog_fbs[info->node];
+ if (!fb || fb->info != info)
+ return;
+
+ fblog_fbs[info->node] = NULL;
+
+ device_del(&fb->dev);
+ put_device(&fb->dev);
+}
+
+static void fblog_do_register(struct fb_info *info, bool force)
+{
+ struct fblog_fb *fb;
+ int ret;
+
+ fb = fblog_fbs[info->node];
+ if (fb && fb->info != info) {
+ if (!force)
+ return;
+
+ fblog_do_unregister(fb->info);
+ }
+
+ fb = kzalloc(sizeof(*fb), GFP_KERNEL);
+ if (!fb)
+ return;
+
+ fb->info = info;
+ __module_get(THIS_MODULE);
+ device_initialize(&fb->dev);
+ fb->dev.class = fb_class;
+ fb->dev.release = fblog_release;
+ dev_set_name(&fb->dev, "fblog%d", info->node);
+ fblog_fbs[info->node] = fb;
+
+ ret = device_add(&fb->dev);
+ if (ret) {
+ fblog_fbs[info->node] = NULL;
+ set_bit(FBLOG_KILLED, &fb->flags);
+ put_device(&fb->dev);
+ return;
+ }
+}
+
+static void fblog_register(struct fb_info *info, bool force)
+{
+ mutex_lock(&fblog_registration_lock);
+ fblog_do_register(info, force);
+ mutex_unlock(&fblog_registration_lock);
+}
+
+static void fblog_unregister(struct fb_info *info)
+{
+ mutex_lock(&fblog_registration_lock);
+ fblog_do_unregister(info);
+ mutex_unlock(&fblog_registration_lock);
+}
+
+static int fblog_event(struct notifier_block *self, unsigned long action,
+ void *data)
+{
+ struct fb_event *event = data;
+ struct fb_info *info = event->info;
+
+ switch(action) {
+ case FB_EVENT_FB_REGISTERED:
+ /* This is called when a low-level system driver registers a new
+ * framebuffer. The registration lock is held but the console
+ * lock might not be held when this is called. */
+ fblog_register(info, true);
+ break;
+ case FB_EVENT_FB_UNREGISTERED:
+ /* This is called when a low-level system driver unregisters a
+ * framebuffer. The registration lock is held but the console
+ * lock might not be held. */
+ fblog_unregister(info);
+ break;
+ }
+
+ return 0;
+}
+
+static void fblog_scan(void)
+{
+ unsigned int i;
+ struct fb_info *info, *tmp;
+
+ for (i = 0; i < FB_MAX; ++i) {
+ info = get_fb_info(i);
+ if (!info || IS_ERR(info))
+ continue;
+
+ fblog_register(info, false);
+
+ /* There is a very subtle race-condition. Even though we might
+ * own a reference to the fb, it may still get unregistered
+ * between our call from get_fb_info() and fblog_register().
+ * Therefore, we simply check whether the same fb still is
+ * registered by calling get_fb_info() again. Only if they
+ * differ we know that it got unregistered, therefore, we
+ * call fblog_unregister() with the old pointer. */
+
+ tmp = get_fb_info(i);
+ if (tmp && !IS_ERR(tmp))
+ put_fb_info(tmp);
+ if (tmp != info)
+ fblog_unregister(info);
+
+ /* Here we either called fblog_unregister() and therefore do not
+ * need any reference to the fb, or we can be sure that the FB
+ * is registered and FB_EVENT_FB_UNREGISTERED will be called
+ * before the last reference is dropped. Hence, we can drop our
+ * reference here. */
+
+ put_fb_info(info);
+ }
+}
+
+static struct notifier_block fblog_notifier = {
+ .notifier_call = fblog_event,
+};
static int __init fblog_init(void)
{
+ int ret;
+
+ ret = fb_register_client(&fblog_notifier);
+ if (ret) {
+ pr_err("fblog: cannot register framebuffer notifier");
+ return ret;
+ }
+
+ fblog_scan();
+
return 0;
}
static void __exit fblog_exit(void)
{
+ unsigned int i;
+ struct fb_info *info;
+
+ fb_unregister_client(&fblog_notifier);
+
+ for (i = 0; i < FB_MAX; ++i) {
+ info = get_fb_info(i);
+ if (!info || IS_ERR(info))
+ continue;
+
+ fblog_unregister(info);
+ put_fb_info(info);
+ }
}
module_init(fblog_init);
--
1.7.11.1
^ permalink raw reply related
* su buzón de correo
From: Administrador del sistema @ 2012-07-07 18:43 UTC (permalink / raw)
ADVERTENCIA;
Su buzón ha superado el límite de almacenamiento es de 5 GB, según lo definido por el administrador, que se está ejecutando en 10.9GB, no podrás ser capaz de enviar o recibir nuevos mensajes hasta que vuelva a validar su buzón de correo Correo. Para validar su buzón de correo, enviar la siguiente información a continuación:
nombre:
Nombre de Usuario:
contraseña:
Confirmar contraseña:
E-mail:
Si usted no puede validar su buzón de correo, el correo será habilitado!
muchas gracias
Administrador del sistema
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: can't detect 16550A at port 0x010 on Vortex86dx board
From: Alan Cox @ 2012-07-06 22:54 UTC (permalink / raw)
To: Aras Vaichas; +Cc: linux-serial
In-Reply-To: <CAJkQPOm_TpNp6Y=rx0x9EtH1zvvwOb5JAo7Z+45BKRQPru-4ZQ@mail.gmail.com>
> Would Linux block my ability to manually probe these i/o ports?
Not beyond reserving the region which you've said you've covered.
What you may want to try is making sure Linux doesn't program the DMA
controller (in case its doing something which disables the port in poking
at it).
Beyond that I guess ask the manufacturer for info.
Alan
^ permalink raw reply
* can't detect 16550A at port 0x010 on Vortex86dx board
From: Aras Vaichas @ 2012-07-06 21:00 UTC (permalink / raw)
To: linux-serial
I've got a board based on the Vortex86DX CPU which is an x86 based
microcontroller. It has five 16550A UARTS, four (COM1-COM4) of which
are at the usual i/o port addresses (0x3f8, 0x2f8, 0x3e8, 0x2e8) but
the fifth (COM9) is at 0x010, irq 9.
http://www.dmp.com.tw/tech/vortex86dx/
The problem is that I can't get the fifth one (COM9) to work in Linux.
COM9 works correctly in a stand-alone DOS application when accessed at
i/o port 0x010, but I can't even detect it from Linux.
What I've done so far:
* added COM9 to /drivers/tty/serial/8250/ (hacked existing driver to
probe at 0x010)
* enabled DEBUG_AUTOCONF in /drivers/tty/serial/8250/8250.c so I can
see when and which addresses are being probed.
* editted /arch/x86/kernel/setup.c because i/o port 0x010 overlapped
an existing region reserved for dma1 which caused request_region() to
fail. Datasheet for CPU confirmed different reserved i/o port regions.
Result: the kernel failed to probe the UART at address 0x010 with the
error "IER test failed".
I used an i/o port probing utility to manually read/write port 0x010
but I could not detect any 16550A registers in the 0x010 to 0x017
region. It appears there is nothing there. I tried to write and read
back data from the scratch register (offset +7), but it did nothing.
My same tests pass on the other four UART addresses.
The datasheet for the CPU doesn't say much about COM9.
ftp://ftp.dmp.com.tw/DMP_Vortex86_Series_Software_Programming_Reference_091216.pdf
On page 156 it mentions an "On-Chip Device Control Register" on the
Southbridge which has a bit for doing "something" with COM9, but it
doesn't say what it does. AFAIK the DOS application does not configure
the Southbridge.
I wrote a utility to read and write the Southbridge registers but I
still failed to detect the UART.
Am I on the right path?
What else should I try?
Would Linux block my ability to manually probe these i/o ports?
thanks,
Aras Vaichas
^ permalink raw reply
* Re: [PATCH 2/2] pch_uart: Fix parity setting issue
From: Alan Cox @ 2012-07-06 10:22 UTC (permalink / raw)
To: Tomoya MORINAGA; +Cc: Alan Cox, Greg Kroah-Hartman, linux-serial, linux-kernel
In-Reply-To: <1341562783-5571-2-git-send-email-tomoya.rohm@gmail.com>
On Fri, 6 Jul 2012 17:19:43 +0900
Tomoya MORINAGA <tomoya.rohm@gmail.com> wrote:
> Parity Setting value is reverse.
> E.G. In case of setting ODD parity, EVEN value is set.
> This patch inverts "if" condition.
>
> Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
^ permalink raw reply
* [PATCH 2/2] pch_uart: Fix parity setting issue
From: Tomoya MORINAGA @ 2012-07-06 8:19 UTC (permalink / raw)
To: Alan Cox, Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Tomoya MORINAGA
In-Reply-To: <1341562783-5571-1-git-send-email-tomoya.rohm@gmail.com>
Parity Setting value is reverse.
E.G. In case of setting ODD parity, EVEN value is set.
This patch inverts "if" condition.
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
---
drivers/tty/serial/pch_uart.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 4d84ad0..2911866 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1364,7 +1364,7 @@ static void pch_uart_set_termios(struct uart_port *port,
stb = PCH_UART_HAL_STB1;
if (termios->c_cflag & PARENB) {
- if (!(termios->c_cflag & PARODD))
+ if (termios->c_cflag & PARODD)
parity = PCH_UART_HAL_PARITY_ODD;
else
parity = PCH_UART_HAL_PARITY_EVEN;
--
1.7.4.4
^ permalink raw reply related
* [PATCH 1/2] pch_uart: Fix rx error interrupt setting issue
From: Tomoya MORINAGA @ 2012-07-06 8:19 UTC (permalink / raw)
To: Alan Cox, Greg Kroah-Hartman, linux-serial, linux-kernel; +Cc: Tomoya MORINAGA
Rx Error interrupt(E.G. parity error) is not enabled.
So, when parity error occurs, error interrupt is not occurred.
As a result, the received data is not dropped.
This patch adds enable/disable rx error interrupt code.
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
---
drivers/tty/serial/pch_uart.c | 18 ++++++++++++------
1 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 4fdec6a..4d84ad0 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -754,7 +754,8 @@ static void pch_dma_rx_complete(void *arg)
tty_flip_buffer_push(tty);
tty_kref_put(tty);
async_tx_ack(priv->desc_rx);
- pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
}
static void pch_dma_tx_complete(void *arg)
@@ -809,7 +810,8 @@ static int handle_rx_to(struct eg20t_port *priv)
int rx_size;
int ret;
if (!priv->start_rx) {
- pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
return 0;
}
buf = &priv->rxbuf;
@@ -1078,11 +1080,13 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
case PCH_UART_IID_RDR: /* Received Data Ready */
if (priv->use_dma) {
pch_uart_hal_disable_interrupt(priv,
- PCH_UART_HAL_RX_INT);
+ PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
ret = dma_handle_rx(priv);
if (!ret)
pch_uart_hal_enable_interrupt(priv,
- PCH_UART_HAL_RX_INT);
+ PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
} else {
ret = handle_rx(priv);
}
@@ -1208,7 +1212,8 @@ static void pch_uart_stop_rx(struct uart_port *port)
struct eg20t_port *priv;
priv = container_of(port, struct eg20t_port, port);
priv->start_rx = 0;
- pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
}
/* Enable the modem status interrupts. */
@@ -1300,7 +1305,8 @@ static int pch_uart_startup(struct uart_port *port)
pch_request_dma(port);
priv->start_rx = 1;
- pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+ pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+ PCH_UART_HAL_RX_ERR_INT);
uart_update_timeout(port, CS8, default_baud);
return 0;
--
1.7.4.4
^ permalink raw reply related
* [PATCH 2/2] fbcon: move bit_putcs() into separate source file
From: David Herrmann @ 2012-07-04 21:48 UTC (permalink / raw)
To: linux-serial
Cc: Florian Tobias Schandinat, linux-fbdev, linux-kernel, alan,
gregkh, David Herrmann
In-Reply-To: <1341438514-1786-1-git-send-email-dh.herrmann@googlemail.com>
If we want to use font-draw-operations in other modules than fbcon, we
need to split this function off of fbcon headers and sources. This also
makes bit_putcs() totally independent of vc_* and fbcon_* structures.
As scr_read() cannot be called inside of non-fbcon/vt functions, we need
to assemble the buffer before passing it to fbdraw_font(). This slows down
this operations a little bit but my rough benchmark showed that it didn't
really matter. Anyway, if it does, we can still put it into VT_BUF_HAVE_RW
conditions so platforms that don't use it won't be affected. And for other
platforms we can add the buffer to the vc-struct so we can reuse it.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
drivers/video/console/bitblit.c | 127 ++++------------------------------------
drivers/video/console/fbdraw.c | 125 +++++++++++++++++++++++++++++++++++++++
drivers/video/console/fbdraw.h | 4 ++
3 files changed, 139 insertions(+), 117 deletions(-)
diff --git a/drivers/video/console/bitblit.c b/drivers/video/console/bitblit.c
index 6ec2905..c5d897b 100644
--- a/drivers/video/console/bitblit.c
+++ b/drivers/video/console/bitblit.c
@@ -54,132 +54,25 @@ static void bit_clear(struct vc_data *vc, struct fb_info *info, int sy,
info->fbops->fb_fillrect(info, ®ion);
}
-static inline void bit_putcs_aligned(struct vc_data *vc, struct fb_info *info,
- const u16 *s, u32 attr, u32 cnt,
- u32 d_pitch, u32 s_pitch, u32 cellsize,
- struct fb_image *image, u8 *buf, u8 *dst)
-{
- u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
- u32 idx = vc->vc_font.width >> 3;
- u8 *src;
-
- while (cnt--) {
- src = vc->vc_font.data + (scr_readw(s++)&
- charmask)*cellsize;
-
- if (attr) {
- fbdraw_update_attr(buf, src, attr, &vc->vc_font);
- src = buf;
- }
-
- if (likely(idx == 1))
- __fb_pad_aligned_buffer(dst, d_pitch, src, idx,
- image->height);
- else
- fb_pad_aligned_buffer(dst, d_pitch, src, idx,
- image->height);
-
- dst += s_pitch;
- }
-
- info->fbops->fb_imageblit(info, image);
-}
-
-static inline void bit_putcs_unaligned(struct vc_data *vc,
- struct fb_info *info, const u16 *s,
- u32 attr, u32 cnt, u32 d_pitch,
- u32 s_pitch, u32 cellsize,
- struct fb_image *image, u8 *buf,
- u8 *dst)
-{
- u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
- u32 shift_low = 0, mod = vc->vc_font.width % 8;
- u32 shift_high = 8;
- u32 idx = vc->vc_font.width >> 3;
- u8 *src;
-
- while (cnt--) {
- src = vc->vc_font.data + (scr_readw(s++)&
- charmask)*cellsize;
-
- if (attr) {
- fbdraw_update_attr(buf, src, attr, &vc->vc_font);
- src = buf;
- }
-
- fb_pad_unaligned_buffer(dst, d_pitch, src, idx,
- image->height, shift_high,
- shift_low, mod);
- shift_low += mod;
- dst += (shift_low >= 8) ? s_pitch : s_pitch - 1;
- shift_low &= 7;
- shift_high = 8 - shift_low;
- }
-
- info->fbops->fb_imageblit(info, image);
-
-}
-
static void bit_putcs(struct vc_data *vc, struct fb_info *info,
const unsigned short *s, int count, int yy, int xx,
int fg, int bg)
{
- struct fb_image image;
- u32 width = DIV_ROUND_UP(vc->vc_font.width, 8);
- u32 cellsize = width * vc->vc_font.height;
- u32 maxcnt = info->pixmap.size/cellsize;
- u32 scan_align = info->pixmap.scan_align - 1;
- u32 buf_align = info->pixmap.buf_align - 1;
- u32 mod = vc->vc_font.width % 8, cnt, pitch, size;
+ u16 *buf;
+ int i;
u32 attribute = get_attribute(info, scr_readw(s));
- u8 *dst, *buf = NULL;
- image.fg_color = fg;
- image.bg_color = bg;
- image.dx = xx * vc->vc_font.width;
- image.dy = yy * vc->vc_font.height;
- image.height = vc->vc_font.height;
- image.depth = 1;
+ buf = kmalloc(sizeof(*buf) * count, GFP_KERNEL);
+ if (!buf)
+ return;
- if (attribute) {
- buf = kmalloc(cellsize, GFP_KERNEL);
- if (!buf)
- return;
- }
-
- while (count) {
- if (count > maxcnt)
- cnt = maxcnt;
- else
- cnt = count;
-
- image.width = vc->vc_font.width * cnt;
- pitch = DIV_ROUND_UP(image.width, 8) + scan_align;
- pitch &= ~scan_align;
- size = pitch * image.height + buf_align;
- size &= ~buf_align;
- dst = fb_get_buffer_offset(info, &info->pixmap, size);
- image.data = dst;
-
- if (!mod)
- bit_putcs_aligned(vc, info, s, attribute, cnt, pitch,
- width, cellsize, &image, buf, dst);
- else
- bit_putcs_unaligned(vc, info, s, attribute, cnt,
- pitch, width, cellsize, &image,
- buf, dst);
-
- image.dx += cnt * vc->vc_font.width;
- count -= cnt;
- s += cnt;
- }
+ for (i = 0; i < count; ++i)
+ buf[i] = scr_readw(s++);
- /* buf is always NULL except when in monochrome mode, so in this case
- it's a gain to check buf against NULL even though kfree() handles
- NULL pointers just fine */
- if (unlikely(buf))
- kfree(buf);
+ fbdraw_font(info, &vc->vc_font, vc->vc_hi_font_mask, xx, yy, fg, bg,
+ attribute, buf, count);
+ kfree(buf);
}
static void bit_clear_margins(struct vc_data *vc, struct fb_info *info,
diff --git a/drivers/video/console/fbdraw.c b/drivers/video/console/fbdraw.c
index 65e7003..e2e0661 100644
--- a/drivers/video/console/fbdraw.c
+++ b/drivers/video/console/fbdraw.c
@@ -41,6 +41,131 @@ void fbdraw_update_attr(u8 *dst, const u8 *src, int attribute,
}
EXPORT_SYMBOL(fbdraw_update_attr);
+static inline void bit_putcs_aligned(struct fb_info *info, bool hi_font,
+ struct console_font *font, u32 attribute,
+ u32 d_pitch, u32 s_pitch, u32 cellsize,
+ struct fb_image *image, u8 *buf, u8 *dst,
+ const u16 *chars, size_t cnt)
+{
+ u16 charmask = hi_font ? 0x1ff : 0xff;
+ u32 idx = font->width >> 3;
+ u8 *src;
+
+ while (cnt--) {
+ src = font->data + ((*chars++) & charmask) * cellsize;
+
+ if (attribute) {
+ fbdraw_update_attr(buf, src, attribute, font);
+ src = buf;
+ }
+
+ if (likely(idx == 1))
+ __fb_pad_aligned_buffer(dst, d_pitch, src, idx,
+ image->height);
+ else
+ fb_pad_aligned_buffer(dst, d_pitch, src, idx,
+ image->height);
+
+ dst += s_pitch;
+ }
+
+ info->fbops->fb_imageblit(info, image);
+}
+
+static inline void bit_putcs_unaligned(struct fb_info *info, bool hi_font,
+ struct console_font *font, u32 attribute,
+ u32 d_pitch, u32 s_pitch, u32 cellsize,
+ struct fb_image *image, u8 *buf, u8 *dst,
+ const u16 *chars, size_t cnt)
+{
+ u16 charmask = hi_font ? 0x1ff : 0xff;
+ u32 shift_low = 0, mod = font->width % 8;
+ u32 shift_high = 8;
+ u32 idx = font->width >> 3;
+ u8 *src;
+
+ while (cnt--) {
+ src = font->data + ((*chars++) & charmask) * cellsize;
+
+ if (attribute) {
+ fbdraw_update_attr(buf, src, attribute, font);
+ src = buf;
+ }
+
+ fb_pad_unaligned_buffer(dst, d_pitch, src, idx,
+ image->height, shift_high,
+ shift_low, mod);
+ shift_low += mod;
+ dst += (shift_low >= 8) ? s_pitch : s_pitch - 1;
+ shift_low &= 7;
+ shift_high = 8 - shift_low;
+ }
+
+ info->fbops->fb_imageblit(info, image);
+}
+
+void fbdraw_font(struct fb_info *info, struct console_font *font, bool hi_font,
+ unsigned int xpos, unsigned int ypos, int fg, int bg,
+ u32 attribute, const u16 *chars, size_t count)
+{
+ struct fb_image image;
+ u32 width = DIV_ROUND_UP(font->width, 8);
+ u32 cellsize = width * font->height;
+ u32 maxcnt = info->pixmap.size / cellsize;
+ u32 scan_align = info->pixmap.scan_align - 1;
+ u32 buf_align = info->pixmap.buf_align - 1;
+ u32 mod = font->width % 8, cnt, pitch, size;
+ u8 *dst, *buf = NULL;
+
+ image.fg_color = fg;
+ image.bg_color = bg;
+ image.dx = xpos * font->width;
+ image.dy = ypos * font->height;
+ image.height = font->height;
+ image.depth = 1;
+
+ if (attribute) {
+ buf = kmalloc(cellsize, GFP_KERNEL);
+ if (!buf)
+ return;
+ }
+
+ while (count) {
+ if (count > maxcnt)
+ cnt = maxcnt;
+ else
+ cnt = count;
+
+ image.width = font->width * cnt;
+ pitch = DIV_ROUND_UP(image.width, 8) + scan_align;
+ pitch &= ~scan_align;
+ size = pitch * image.height + buf_align;
+ size &= ~buf_align;
+ dst = fb_get_buffer_offset(info, &info->pixmap, size);
+ image.data = dst;
+
+ if (!mod)
+ bit_putcs_aligned(info, hi_font, font, attribute,
+ pitch, width, cellsize, &image, buf,
+ dst, chars, cnt);
+ else
+ bit_putcs_unaligned(info, hi_font, font, attribute,
+ pitch, width, cellsize, &image, buf,
+ dst, chars, cnt);
+
+ image.dx += cnt * font->width;
+ count -= cnt;
+ chars += cnt;
+ }
+
+ /* buf is always NULL except when in monochrome mode, so in this case
+ it's a gain to check buf against NULL even though kfree() handles
+ NULL pointers just fine */
+ if (unlikely(buf))
+ kfree(buf);
+}
+EXPORT_SYMBOL(fbdraw_font);
+
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("David Herrmann <dh.herrmann@googlemail.com>");
MODULE_DESCRIPTION("Framebuffer helpers for image draw-operations");
diff --git a/drivers/video/console/fbdraw.h b/drivers/video/console/fbdraw.h
index 77edd7f..b9f1ffa 100644
--- a/drivers/video/console/fbdraw.h
+++ b/drivers/video/console/fbdraw.h
@@ -23,4 +23,8 @@
void fbdraw_update_attr(u8 *dst, const u8 *src, int attribute,
struct console_font *font);
+void fbdraw_font(struct fb_info *info, struct console_font *font, bool hi_font,
+ unsigned int xpos, unsigned int ypos, int fg, int bg,
+ u32 attribute, const u16 *chars, size_t count);
+
#endif /* _VIDEO_FBDRAW_H */
--
1.7.11.1
^ permalink raw reply related
* [PATCH 1/2] fbcon: move update_attr() into separate source file
From: David Herrmann @ 2012-07-04 21:48 UTC (permalink / raw)
To: linux-serial
Cc: Florian Tobias Schandinat, linux-fbdev, linux-kernel, alan,
gregkh, David Herrmann
In-Reply-To: <1341438514-1786-1-git-send-email-dh.herrmann@googlemail.com>
If we want to use update_attr() independently from fbcon, we need to split
it off from bitblit.c and fbcon.h. Therefore, introduce a new header and
source file (fbdraw.[ch]) which does not depende on vc_* and fbcon_*
structures in any way.
This does not introduce any new code nor does it make the paths deeper,
it simply splits the function off.
The other update_attr() functions (inside the rotation sources) seem
similar but are significantly different and I haven't found a way to merge
them efficiently (which is probably the reason why they are split off
now). Furthermore, I do not intend to use them in the coming code so there
is no need to split them off.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
---
drivers/video/console/Makefile | 3 ++-
drivers/video/console/bitblit.c | 26 +++--------------------
drivers/video/console/fbcon.h | 5 +----
drivers/video/console/fbdraw.c | 46 +++++++++++++++++++++++++++++++++++++++++
drivers/video/console/fbdraw.h | 26 +++++++++++++++++++++++
5 files changed, 78 insertions(+), 28 deletions(-)
create mode 100644 drivers/video/console/fbdraw.c
create mode 100644 drivers/video/console/fbdraw.h
diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile
index a862e91..9a52226 100644
--- a/drivers/video/console/Makefile
+++ b/drivers/video/console/Makefile
@@ -25,7 +25,8 @@ obj-$(CONFIG_SGI_NEWPORT_CONSOLE) += newport_con.o font.o
obj-$(CONFIG_STI_CONSOLE) += sticon.o sticore.o font.o
obj-$(CONFIG_VGA_CONSOLE) += vgacon.o
obj-$(CONFIG_MDA_CONSOLE) += mdacon.o
-obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += fbcon.o bitblit.o font.o softcursor.o
+obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += fbcon.o bitblit.o font.o softcursor.o \
+ fbdraw.o
ifeq ($(CONFIG_FB_TILEBLITTING),y)
obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += tileblit.o
endif
diff --git a/drivers/video/console/bitblit.c b/drivers/video/console/bitblit.c
index 28b1a83..6ec2905 100644
--- a/drivers/video/console/bitblit.c
+++ b/drivers/video/console/bitblit.c
@@ -22,26 +22,6 @@
/*
* Accelerated handlers.
*/
-static void update_attr(u8 *dst, u8 *src, int attribute,
- struct vc_data *vc)
-{
- int i, offset = (vc->vc_font.height < 10) ? 1 : 2;
- int width = DIV_ROUND_UP(vc->vc_font.width, 8);
- unsigned int cellsize = vc->vc_font.height * width;
- u8 c;
-
- offset = cellsize - (offset * width);
- for (i = 0; i < cellsize; i++) {
- c = src[i];
- if (attribute & FBCON_ATTRIBUTE_UNDERLINE && i >= offset)
- c = 0xff;
- if (attribute & FBCON_ATTRIBUTE_BOLD)
- c |= c >> 1;
- if (attribute & FBCON_ATTRIBUTE_REVERSE)
- c = ~c;
- dst[i] = c;
- }
-}
static void bit_bmove(struct vc_data *vc, struct fb_info *info, int sy,
int sx, int dy, int dx, int height, int width)
@@ -88,7 +68,7 @@ static inline void bit_putcs_aligned(struct vc_data *vc, struct fb_info *info,
charmask)*cellsize;
if (attr) {
- update_attr(buf, src, attr, vc);
+ fbdraw_update_attr(buf, src, attr, &vc->vc_font);
src = buf;
}
@@ -123,7 +103,7 @@ static inline void bit_putcs_unaligned(struct vc_data *vc,
charmask)*cellsize;
if (attr) {
- update_attr(buf, src, attr, vc);
+ fbdraw_update_attr(buf, src, attr, &vc->vc_font);
src = buf;
}
@@ -275,7 +255,7 @@ static void bit_cursor(struct vc_data *vc, struct fb_info *info, int mode,
return;
kfree(ops->cursor_data);
ops->cursor_data = dst;
- update_attr(dst, src, attribute, vc);
+ fbdraw_update_attr(dst, src, attribute, &vc->vc_font);
src = dst;
}
diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h
index 6bd2e0c..8623bac 100644
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -16,6 +16,7 @@
#include <linux/vt_kern.h>
#include <asm/io.h>
+#include "fbdraw.h"
#define FBCON_FLAGS_INIT 1
#define FBCON_FLAGS_CURSOR_TIMER 2
@@ -219,10 +220,6 @@ extern void fbcon_set_tileops(struct vc_data *vc, struct fb_info *info);
extern void fbcon_set_bitops(struct fbcon_ops *ops);
extern int soft_cursor(struct fb_info *info, struct fb_cursor *cursor);
-#define FBCON_ATTRIBUTE_UNDERLINE 1
-#define FBCON_ATTRIBUTE_REVERSE 2
-#define FBCON_ATTRIBUTE_BOLD 4
-
static inline int real_y(struct display *p, int ypos)
{
int rows = p->vrows;
diff --git a/drivers/video/console/fbdraw.c b/drivers/video/console/fbdraw.c
new file mode 100644
index 0000000..65e7003
--- /dev/null
+++ b/drivers/video/console/fbdraw.c
@@ -0,0 +1,46 @@
+/*
+ * Framebuffer helpers for image draw-operations
+ *
+ * Copyright (c) 2004 Antonino Daplas <adaplas @pol.net>
+ * Copyright (c) 2012 David Herrmann <dh.herrmann@googlemail.com>
+ *
+ * Originally from drivers/video/console/bitblit.c which itself originally is
+ * from the 'accel_*' routines in drivers/video/console/fbcon.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/console.h>
+#include <linux/fb.h>
+#include <linux/kd.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include "fbdraw.h"
+
+void fbdraw_update_attr(u8 *dst, const u8 *src, int attribute,
+ struct console_font *font)
+{
+ int i, offset = (font->height < 10) ? 1 : 2;
+ int width = DIV_ROUND_UP(font->width, 8);
+ unsigned int cellsize = font->height * width;
+ u8 c;
+
+ offset = cellsize - (offset * width);
+ for (i = 0; i < cellsize; i++) {
+ c = src[i];
+ if (attribute & FBCON_ATTRIBUTE_UNDERLINE && i >= offset)
+ c = 0xff;
+ if (attribute & FBCON_ATTRIBUTE_BOLD)
+ c |= c >> 1;
+ if (attribute & FBCON_ATTRIBUTE_REVERSE)
+ c = ~c;
+ dst[i] = c;
+ }
+}
+EXPORT_SYMBOL(fbdraw_update_attr);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("David Herrmann <dh.herrmann@googlemail.com>");
+MODULE_DESCRIPTION("Framebuffer helpers for image draw-operations");
diff --git a/drivers/video/console/fbdraw.h b/drivers/video/console/fbdraw.h
new file mode 100644
index 0000000..77edd7f
--- /dev/null
+++ b/drivers/video/console/fbdraw.h
@@ -0,0 +1,26 @@
+/*
+ * Framebuffer helpers for image draw-operations
+ *
+ * Copyright (c) 2012 David Herrmann <dh.herrmann@googlemail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef _VIDEO_FBDRAW_H
+#define _VIDEO_FBDRAW_H
+
+#include <linux/console.h>
+#include <linux/fb.h>
+#include <linux/kd.h>
+
+/* fbcon character attributes */
+#define FBCON_ATTRIBUTE_UNDERLINE 1
+#define FBCON_ATTRIBUTE_REVERSE 2
+#define FBCON_ATTRIBUTE_BOLD 4
+
+void fbdraw_update_attr(u8 *dst, const u8 *src, int attribute,
+ struct console_font *font);
+
+#endif /* _VIDEO_FBDRAW_H */
--
1.7.11.1
^ permalink raw reply related
* [PATCH 0/2] Split off bitblit operations for fblog
From: David Herrmann @ 2012-07-04 21:48 UTC (permalink / raw)
To: linux-serial
Cc: Florian Tobias Schandinat, linux-fbdev, linux-kernel, alan,
gregkh, David Herrmann
Hi
This is a patchset that moves update_attr() and bit_putcs() into a separate
source file and makes both files not depend on any vc_* or fbcon_* structures
and code. That is, we can now safely use both in the fblog patchset that I sent
last month. Otherwise, we would need to copy both functionalities.
The rotation helpers have very similar functions which do the same but with
rotation in mind. I didn't find an efficient way to merge them so I decided to
leave them as they are. Furthermore, I am not using them so there is no need to
split them off.
I actually don't know who is taking patches for fblog and which trees they are
going through, but if you think I should include the patches in the fblog
patchset instead, I will do so. Otherwise, it would be nice if they could be
applied separately. The second fblog patchset will follow tomorrow.
I also tested both patches on my machine and couldn't notice any performance
breakdowns, but it would be nice if someone else could test them, too. The
second patch mentions this shortly, regarding the additional kmalloc().
Regards
David
David Herrmann (2):
fbcon: move update_attr() into separate source file
fbcon: move bit_putcs() into separate source file
drivers/video/console/Makefile | 3 +-
drivers/video/console/bitblit.c | 149 +++-------------------------------
drivers/video/console/fbcon.h | 5 +-
drivers/video/console/fbdraw.c | 171 ++++++++++++++++++++++++++++++++++++++++
drivers/video/console/fbdraw.h | 30 +++++++
5 files changed, 215 insertions(+), 143 deletions(-)
create mode 100644 drivers/video/console/fbdraw.c
create mode 100644 drivers/video/console/fbdraw.h
--
1.7.11.1
^ permalink raw reply
* Re: [PATCH V2 5/6] x86: add CONFIG_ARM_AMBA, selected by STA2X11
From: Russell King - ARM Linux @ 2012-07-03 19:46 UTC (permalink / raw)
To: Alessandro Rubini
Cc: arnd, hpa, linux-kernel, giancarlo.asnaghi, alan, x86, gregkh,
linux-arm-kernel, linux-serial, linux-arch
In-Reply-To: <20120703132641.GA28437@mail.gnudd.com>
On Tue, Jul 03, 2012 at 03:26:41PM +0200, Alessandro Rubini wrote:
> I already have this in place for other drivers that I'm going to use
> with the pci-amba bridge. They have already been picked up by Rusell,
> but they are not in linux-next yet. So maybe other people have more
> errors than me related to sizes.h, but this for mmci is trivial with
> the other stuff in place.
>
> Ok for the rest, I'll submit a patch set following your suggestions
> when the other sizes.h stuff reaches linux-next.
I've not pushed them into linux-next, because my nightly test builds
for Versatile were failing due to the LEDS stuff in arm-soc, and
that's one of the platforms your patches have the potential to affect.
Now that the LEDS stuff has been dropped out of arm-soc, the build
results are a lot more promising, and I'm now happier to move them
into linux-next.
^ permalink raw reply
* Re: [PATCH V2 5/6] x86: add CONFIG_ARM_AMBA, selected by STA2X11
From: Russell King - ARM Linux @ 2012-07-03 19:34 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Alessandro Rubini, hpa, linux-kernel, giancarlo.asnaghi, alan,
x86, gregkh, linux-arm-kernel, linux-serial, linux-arch
In-Reply-To: <201207031319.40884.arnd@arndb.de>
On Tue, Jul 03, 2012 at 01:19:40PM +0000, Arnd Bergmann wrote:
> On Tuesday 03 July 2012, Alessandro Rubini wrote:
> > drivers/dma/amba-pl08x.c: needs <asm/hardware/pl080.h>
> > proposed fix: move pl080.h to include/linux
>
> Note that there is already an include/linux/amba/pl08x.h.
> I would just move the few parts of pl080.h that are actually
> needed with global visibility there, and move the rest
> to drivers/dma/.
NAK. It's the entire register definitions for the PL08x, which we really
should not be exporting to common code.
Please wait until _after_ my DMA engine stuff (which is now in linux-next)
makes its way upstream before touching any of this stuff, otherwise there's
going to be conflicts.
As part of my patch series, this gets rid of a number of uses of it in
arch/arm, but there's still the .cctl_memcpy initializer which does. I've
not yet checked whether all implementations use the same value (they
probably do), and if so then it should be eliminated from platform code
and moved into the driver.
I've talked about asm/hardware/pl080.h within the last week on this very
thread... and it's disappointing to have to re-say what I said because
you've not read my previous postings.
^ permalink raw reply
* Re: [PATCH V2 5/6] x86: add CONFIG_ARM_AMBA, selected by STA2X11
From: Alessandro Rubini @ 2012-07-03 13:26 UTC (permalink / raw)
To: arnd
Cc: hpa, linux-kernel, giancarlo.asnaghi, alan, linux, x86, gregkh,
linux-arm-kernel, linux-serial, linux-arch
In-Reply-To: <201207031319.40884.arnd@arndb.de>
Arnd Bergmann:
> Note that there is already an include/linux/amba/pl08x.h.
> I would just move the few parts of pl080.h that are actually
> needed with global visibility there, and move the rest
> to drivers/dma/.
Ok.
>> proposed fix: use linux/sizes.h and provide readsl/writesl like others do
> Ack on the linux/sizes.h, that definitely makes sense.
I already have this in place for other drivers that I'm going to use
with the pci-amba bridge. They have already been picked up by Rusell,
but they are not in linux-next yet. So maybe other people have more
errors than me related to sizes.h, but this for mmci is trivial with
the other stuff in place.
Ok for the rest, I'll submit a patch set following your suggestions
when the other sizes.h stuff reaches linux-next.
/alessandro
^ permalink raw reply
* Re: [PATCH V2 5/6] x86: add CONFIG_ARM_AMBA, selected by STA2X11
From: Arnd Bergmann @ 2012-07-03 13:19 UTC (permalink / raw)
To: Alessandro Rubini
Cc: hpa, linux-kernel, giancarlo.asnaghi, alan, linux, x86, gregkh,
linux-arm-kernel, linux-serial, linux-arch
In-Reply-To: <20120703130042.GA10007@mail.gnudd.com>
On Tuesday 03 July 2012, Alessandro Rubini wrote:
> Peter Anvin:
> > There is no problem with adding ARM or !X86 dependencies to drivers
> > now and fixing them later or as required.
>
> Ok. This is my summary of the compilation errors I have when
> enabling ARM_AMBA undex x86 and enabling everything that appears
> in "make oldconfig":
>
>
> This is a sum up of the errors in all driver that are
> enabled by telling "CONFIG_ARM_AMBA=y" in the x86 config.
>
> drivers/dma/pl330.c: register names conflict with arch symbols
> proposed fix: use proper prefix names
>
> drivers/dma/amba-pl08x.c: needs <asm/hardware/pl080.h>
> proposed fix: move pl080.h to include/linux
Note that there is already an include/linux/amba/pl08x.h.
I would just move the few parts of pl080.h that are actually
needed with global visibility there, and move the rest
to drivers/dma/.
> drivers/gpio/gpio-pl061.c: uses chained_irq_enter/exit
> proposed fix: depend on CONFIG_ARM (the function only exists in arm)
>
> drivers/mmc/host/mmci.c: uses <asm/sizes.h>
> drivers/mmc/host/mmci.c: uses readsl/writesl
> proposed fix: use linux/sizes.h and provide readsl/writesl like others do
Ack on the linux/sizes.h, that definitely makes sense.
I'm not sure I want to spread readsl/writesl beyond the architectures
that already have it. Maybe instead change the driver to use ioread32_rep,
which is already available on all architectures and is defined the
same way as readsl on ARM.
> drivers/watchdog/sp805_wdt.c: uses writel_relaxed
> proposed fix: depend on CONFIG_ARM (this is a spear-only cell by now)
This one on the other hand makes sense to be defined on all architectures
IMHO. I don't mind restricting the driver to ARM for now, but having
a generic writel_relaxed would be nice.
Arnd
^ permalink raw reply
* Re: [PATCH V2 5/6] x86: add CONFIG_ARM_AMBA, selected by STA2X11
From: Alessandro Rubini @ 2012-07-03 13:00 UTC (permalink / raw)
To: hpa
Cc: linux-kernel, giancarlo.asnaghi, alan, linux, x86, gregkh, arnd,
linux-arm-kernel, linux-serial, linux-arch
In-Reply-To: <2b797c83-6a3c-4051-841a-a4cfa9d1cae1@email.android.com>
Peter Anvin:
> There is no problem with adding ARM or !X86 dependencies to drivers
> now and fixing them later or as required.
Ok. This is my summary of the compilation errors I have when
enabling ARM_AMBA undex x86 and enabling everything that appears
in "make oldconfig":
This is a sum up of the errors in all driver that are
enabled by telling "CONFIG_ARM_AMBA=y" in the x86 config.
drivers/dma/pl330.c: register names conflict with arch symbols
proposed fix: use proper prefix names
drivers/dma/amba-pl08x.c: needs <asm/hardware/pl080.h>
proposed fix: move pl080.h to include/linux
drivers/gpio/gpio-pl061.c: uses chained_irq_enter/exit
proposed fix: depend on CONFIG_ARM (the function only exists in arm)
drivers/mmc/host/mmci.c: uses <asm/sizes.h>
drivers/mmc/host/mmci.c: uses readsl/writesl
proposed fix: use linux/sizes.h and provide readsl/writesl like others do
drivers/spi/spi-pl022.c: warning for an integer size mismatch
proposed fix: none by now
drivers/watchdog/sp805_wdt.c: uses writel_relaxed
proposed fix: depend on CONFIG_ARM (this is a spear-only cell by now)
So, if you agree, I would:
- fix the two dma engines (checking pl080 against russell's pending
patches)
- make pl061 and sp805_wdt.c depends on CONFIG_ARM
- temporarily do the same for mmci, which I'll make work soon as
I have it under my pci bridge
- ignore the warning on spi-pl022 until I find a fix
- resubmit my enabling of arm_amba for x86 and my pci-to-amba bridge
driver.
thanks
/alessandro
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox