* [PATCH 07/10] drivers: tty: sa1100: use setup_timer() helper.
From: Allen Pais @ 2017-09-22 8:26 UTC (permalink / raw)
To: linux-serial; +Cc: linux-kernel, gregkh, jslaby, Allen Pais
In-Reply-To: <1506068812-8496-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/tty/serial/sa1100.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index fd3d132..75bd1e0 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -640,9 +640,8 @@ static void __init sa1100_init_ports(void)
sa1100_ports[i].port.fifosize = 8;
sa1100_ports[i].port.line = i;
sa1100_ports[i].port.iotype = UPIO_MEM;
- init_timer(&sa1100_ports[i].timer);
- sa1100_ports[i].timer.function = sa1100_timeout;
- sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i];
+ setup_timer(&sa1100_ports[i].timer, sa1100_timeout,
+ (unsigned long)&sa1100_ports[i]);
}
/*
--
2.7.4
^ permalink raw reply related
* [PATCH 06/10] drivers: tty: 8250: use setup_timer() helper.
From: Allen Pais @ 2017-09-22 8:26 UTC (permalink / raw)
To: linux-serial; +Cc: linux-kernel, gregkh, jslaby, Allen Pais
In-Reply-To: <1506068812-8496-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/tty/serial/8250/8250_core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index d29b512a..00d4b11 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -525,8 +525,7 @@ static void __init serial8250_isa_init_ports(void)
base_ops = port->ops;
port->ops = &univ8250_port_ops;
- init_timer(&up->timer);
- up->timer.function = serial8250_timeout;
+ setup_timer(&up->timer, serial8250_timeout, 0UL);
up->ops = &univ8250_driver_ops;
--
2.7.4
^ permalink raw reply related
* [PATCH 05/10] drivers: tty: pnx8xxx: use setup_timer() helper.
From: Allen Pais @ 2017-09-22 8:26 UTC (permalink / raw)
To: linux-serial; +Cc: linux-kernel, gregkh, jslaby, Allen Pais
In-Reply-To: <1506068812-8496-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/tty/serial/pnx8xxx_uart.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c
index dab2668..a05508a 100644
--- a/drivers/tty/serial/pnx8xxx_uart.c
+++ b/drivers/tty/serial/pnx8xxx_uart.c
@@ -666,9 +666,8 @@ static void __init pnx8xxx_init_ports(void)
first = 0;
for (i = 0; i < NR_PORTS; i++) {
- init_timer(&pnx8xxx_ports[i].timer);
- pnx8xxx_ports[i].timer.function = pnx8xxx_timeout;
- pnx8xxx_ports[i].timer.data = (unsigned long)&pnx8xxx_ports[i];
+ setup_timer(&pnx8xxx_ports[i].timer, pnx8xxx_timeout,
+ (unsigned long)&pnx8xxx_ports[i]);
pnx8xxx_ports[i].port.ops = &pnx8xxx_pops;
}
}
--
2.7.4
^ permalink raw reply related
* [PATCH 04/10] drivers: tty: max3100: use setup_timer() helper.
From: Allen Pais @ 2017-09-22 8:26 UTC (permalink / raw)
To: linux-serial; +Cc: linux-kernel, gregkh, jslaby, Allen Pais
In-Reply-To: <1506068812-8496-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/tty/serial/max3100.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index ace8264..b6b3453 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -787,9 +787,8 @@ static int max3100_probe(struct spi_device *spi)
max3100s[i]->poll_time = 1;
max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend;
max3100s[i]->minor = i;
- init_timer(&max3100s[i]->timer);
- max3100s[i]->timer.function = max3100_timeout;
- max3100s[i]->timer.data = (unsigned long) max3100s[i];
+ setup_timer(&max3100s[i]->timer, max3100_timeout,
+ (unsigned long)max3100s[i]);
dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i);
max3100s[i]->port.irq = max3100s[i]->irq;
--
2.7.4
^ permalink raw reply related
* [PATCH 03/10] drivers: tty: vcc: use setup_timer() helper.
From: Allen Pais @ 2017-09-22 8:26 UTC (permalink / raw)
To: linux-serial; +Cc: linux-kernel, gregkh, jslaby, Allen Pais
In-Reply-To: <1506068812-8496-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/tty/vcc.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c
index ef01d24..954b190 100644
--- a/drivers/tty/vcc.c
+++ b/drivers/tty/vcc.c
@@ -645,13 +645,8 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
if (rv)
goto free_domain;
- init_timer(&port->rx_timer);
- port->rx_timer.function = vcc_rx_timer;
- port->rx_timer.data = port->index;
-
- init_timer(&port->tx_timer);
- port->tx_timer.function = vcc_tx_timer;
- port->tx_timer.data = port->index;
+ setup_timer(&port->rx_timer, vcc_rx_timer, port->index);
+ setup_timer(&port->tx_timer, vcc_tx_timer, port->index);
dev_set_drvdata(&vdev->dev, port);
--
2.7.4
^ permalink raw reply related
* [PATCH 02/10] drivers:tty: imx: use setup_timer() helper.
From: Allen Pais @ 2017-09-22 8:26 UTC (permalink / raw)
To: linux-serial; +Cc: linux-kernel, gregkh, jslaby, Allen Pais
In-Reply-To: <1506068812-8496-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/tty/serial/imx.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index dfeff39..64f57c6 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2115,9 +2115,7 @@ static int serial_imx_probe(struct platform_device *pdev)
sport->port.rs485.flags =
SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX;
sport->port.flags = UPF_BOOT_AUTOCONF;
- init_timer(&sport->timer);
- sport->timer.function = imx_timeout;
- sport->timer.data = (unsigned long)sport;
+ setup_timer(&sport->timer, imx_timeout, (unsigned long)sport);
sport->gpios = mctrl_gpio_init(&sport->port, 0);
if (IS_ERR(sport->gpios))
--
2.7.4
^ permalink raw reply related
* [PATCH 01/10] drivers: tty: mux: use setup_timer() helper.
From: Allen Pais @ 2017-09-22 8:26 UTC (permalink / raw)
To: linux-serial; +Cc: linux-kernel, gregkh, jslaby, Allen Pais
In-Reply-To: <1506068812-8496-1-git-send-email-allen.lkml@gmail.com>
Use setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
---
drivers/tty/serial/mux.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 2bff69e..a789837 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -576,8 +576,7 @@ static int __init mux_init(void)
if(port_cnt > 0) {
/* Start the Mux timer */
- init_timer(&mux_timer);
- mux_timer.function = mux_poll;
+ setup_timer(&mux_timer, mux_poll, 0UL);
mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
#ifdef CONFIG_SERIAL_MUX_CONSOLE
--
2.7.4
^ permalink raw reply related
* [PATCH 00/10] use setup_timer() helper function.
From: Allen Pais @ 2017-09-22 8:26 UTC (permalink / raw)
To: linux-serial; +Cc: linux-kernel, gregkh, jslaby, Allen Pais
This series uses setup_timer() helper function. The series
addresses the files under drivers/tty/*.
Allen Pais (10):
drivers: tty: mux: use setup_timer() helper.
drivers:tty: imx: use setup_timer() helper.
drivers: tty: vcc: use setup_timer() helper.
drivers: tty: max3100: use setup_timer() helper.
drivers: tty: pnx8xxx: use setup_timer() helper.
drivers: tty: 8250: use setup_timer() helper.
drivers: tty: sa1100: use setup_timer() helper.
drivers: tty: n_gsm: use setup_timer() helper.
drivers: tty: sn_console: use setup_timer() helper.
drivers: tty: ifx6x60: use setup_timer() helper.
drivers/tty/n_gsm.c | 4 +---
drivers/tty/serial/8250/8250_core.c | 3 +--
drivers/tty/serial/ifx6x60.c | 5 ++---
drivers/tty/serial/imx.c | 4 +---
drivers/tty/serial/max3100.c | 5 ++---
drivers/tty/serial/mux.c | 3 +--
drivers/tty/serial/pnx8xxx_uart.c | 5 ++---
drivers/tty/serial/sa1100.c | 5 ++---
drivers/tty/serial/sn_console.c | 4 +---
drivers/tty/vcc.c | 9 ++-------
10 files changed, 15 insertions(+), 32 deletions(-)
--
2.7.4
^ permalink raw reply
* Re: [PATCH v3 1/6] serial: imx: remove CTSC and CTS handling from imx_disable_dma
From: Martyn Welch @ 2017-09-21 19:12 UTC (permalink / raw)
To: Uwe Kleine-König
Cc: Greg Kroah-Hartman, Nandor Han, Romain Perier, linux-serial,
linux-arm-kernel, linux-kernel, Fabio Estevam
In-Reply-To: <20170921182017.t7c75tyy66q7q3ns@pengutronix.de>
On Thu, Sep 21, 2017 at 08:20:17PM +0200, Uwe Kleine-König wrote:
> On Thu, Sep 21, 2017 at 05:18:12PM +0100, Martyn Welch wrote:
> > From: Nandor Han <nandor.han@ge.com>
> >
> > The CTSC and CTS bits affect operation of the CTS/RTS hardware flow
> > control signal (depending on whether the device is in DCE or DTE mode) and
> > are not related to DMA. When in RS-232 mode, the driver is using the
> > automatic CTSC control based on a rxFIFO fill level unless the state of
> > the CTS signal is explictly set via an ioctl call.
> >
> > Previous improvements to the imx serial driver have resulted on
> > imx_disable_dma() only being called on shutdown, by which point the
> > serial core has already correctly deasserted CTS.
> >
> > Testing shows that without this handling in imx_disable_dma() the CTS
> > signal state is set correctly when the device is open and TIOCM_RTS is
> > set/cleared via the TIOCMGET ioctl. The CTS signal is also correctly
> > deasserted when the device file is closed.
>
> With that block kept CTS set once more to inactive. So the block doesn't
> hurt and is "only" superflous, right?
>
That's my understanding, yes.
> > When in RS-485 mode, the driver uses the CTS signal very differently and
> > appears to control it via calls to imx_port_rts_active() and
> > imx_port_rts_inactive().
> >
> > This configuration of the CTSC and CTS bits are therefore not needed.
> >
> > Signed-off-by: Nandor Han <nandor.han@ge.com>
> > Signed-off-by: Romain Perier <romain.perier@collabora.com>
> > Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
> > ---
> > drivers/tty/serial/imx.c | 5 -----
> > 1 file changed, 5 deletions(-)
> >
> > diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> > index fe368a4..d90dae3 100644
> > --- a/drivers/tty/serial/imx.c
> > +++ b/drivers/tty/serial/imx.c
> > @@ -1225,11 +1225,6 @@ static void imx_disable_dma(struct imx_port *sport)
> > temp &= ~(UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN);
> > writel(temp, sport->port.membase + UCR1);
> >
> > - /* clear UCR2 */
> > - temp = readl(sport->port.membase + UCR2);
> > - temp &= ~(UCR2_CTSC | UCR2_CTS | UCR2_ATEN);
> > - writel(temp, sport->port.membase + UCR2);
>
> The commit log doesn't mention ATEN, I guess that one just doesn't
> matter any more at this stage? Would be nice to point out though.
>
Hmm, going to need to look at this again...
Patch 5 adds clearing ATEN into imx_stop_rx(), which is sensible given
that it's the aging timer on the rxFIFO, but I don't think we should be
removing that from here before it's in imx_stop_rx().
> Best regards
> Uwe
>
> --
> Pengutronix e.K. | Uwe Kleine-König |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply
* Re: [PATCH v3 5/6] serial: imx: update the stop rx,tx procedures
From: Uwe Kleine-König @ 2017-09-21 18:28 UTC (permalink / raw)
To: Martyn Welch
Cc: Greg Kroah-Hartman, Nandor Han, Romain Perier, linux-serial,
linux-arm-kernel, linux-kernel, Fabio Estevam
In-Reply-To: <1506010697-22114-6-git-send-email-martyn.welch@collabora.co.uk>
On Thu, Sep 21, 2017 at 05:18:16PM +0100, Martyn Welch wrote:
> From: Nandor Han <nandor.han@ge.com>
>
> According to "Documentation/serial/driver" both procedures should stop
> receiving or sending data. Based on this the procedures should stop the
> activity regardless if DMA is enabled or not.
>
> This commit updates both imx_stop_{rx|tx} procedures to stop the
> activity and disable the interrupts related to that.
>
> Signed-off-by: Nandor Han <nandor.han@ge.com>
> Signed-off-by: Romain Perier <romain.perier@collabora.com>
> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
> ---
> drivers/tty/serial/imx.c | 36 +++++++++++++++++-------------------
> 1 file changed, 17 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index ed02783..256b128 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -388,15 +388,14 @@ static void imx_stop_tx(struct uart_port *port)
> struct imx_port *sport = (struct imx_port *)port;
> unsigned long temp;
>
> - /*
> - * We are maybe in the SMP context, so if the DMA TX thread is running
> - * on other cpu, we have to wait for it to finish.
> - */
did you understand this comment you're removing here? I admit I don't
but unless it is non-sensical you're doing something wrong.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply
* Re: [PATCH v3 4/6] serial: imx: unmap sg buffers when DMA channel is released
From: Uwe Kleine-König @ 2017-09-21 18:25 UTC (permalink / raw)
To: Martyn Welch
Cc: Greg Kroah-Hartman, Nandor Han, Romain Perier, linux-serial,
linux-arm-kernel, linux-kernel, Fabio Estevam
In-Reply-To: <1506010697-22114-5-git-send-email-martyn.welch@collabora.co.uk>
On Thu, Sep 21, 2017 at 05:18:15PM +0100, Martyn Welch wrote:
> From: Nandor Han <nandor.han@ge.com>
>
> This commits unmaps sg buffers when the DMA channel is released. It also
> sets to zero `dma_is_rxing` and `dma_is_txing` to state that the
> corresponding channels cannot transmit/receive data, as these are
> disabled.
That's a fix for a race, right? The functions being fixed were
introduced just in the patch before and I guess the race was there
already before. It is best if you could resort your series to have fixes
first. This way they can easily be applied during the rc phase while the
rest waits for the merge window.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply
* Re: [PATCH v3 1/6] serial: imx: remove CTSC and CTS handling from imx_disable_dma
From: Uwe Kleine-König @ 2017-09-21 18:20 UTC (permalink / raw)
To: Martyn Welch
Cc: Greg Kroah-Hartman, Nandor Han, Romain Perier, linux-serial,
linux-arm-kernel, linux-kernel, Fabio Estevam
In-Reply-To: <1506010697-22114-2-git-send-email-martyn.welch@collabora.co.uk>
On Thu, Sep 21, 2017 at 05:18:12PM +0100, Martyn Welch wrote:
> From: Nandor Han <nandor.han@ge.com>
>
> The CTSC and CTS bits affect operation of the CTS/RTS hardware flow
> control signal (depending on whether the device is in DCE or DTE mode) and
> are not related to DMA. When in RS-232 mode, the driver is using the
> automatic CTSC control based on a rxFIFO fill level unless the state of
> the CTS signal is explictly set via an ioctl call.
>
> Previous improvements to the imx serial driver have resulted on
> imx_disable_dma() only being called on shutdown, by which point the
> serial core has already correctly deasserted CTS.
>
> Testing shows that without this handling in imx_disable_dma() the CTS
> signal state is set correctly when the device is open and TIOCM_RTS is
> set/cleared via the TIOCMGET ioctl. The CTS signal is also correctly
> deasserted when the device file is closed.
With that block kept CTS set once more to inactive. So the block doesn't
hurt and is "only" superflous, right?
> When in RS-485 mode, the driver uses the CTS signal very differently and
> appears to control it via calls to imx_port_rts_active() and
> imx_port_rts_inactive().
>
> This configuration of the CTSC and CTS bits are therefore not needed.
>
> Signed-off-by: Nandor Han <nandor.han@ge.com>
> Signed-off-by: Romain Perier <romain.perier@collabora.com>
> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
> ---
> drivers/tty/serial/imx.c | 5 -----
> 1 file changed, 5 deletions(-)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index fe368a4..d90dae3 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -1225,11 +1225,6 @@ static void imx_disable_dma(struct imx_port *sport)
> temp &= ~(UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN);
> writel(temp, sport->port.membase + UCR1);
>
> - /* clear UCR2 */
> - temp = readl(sport->port.membase + UCR2);
> - temp &= ~(UCR2_CTSC | UCR2_CTS | UCR2_ATEN);
> - writel(temp, sport->port.membase + UCR2);
The commit log doesn't mention ATEN, I guess that one just doesn't
matter any more at this stage? Would be nice to point out though.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply
* Re: [PATCH v3 2/6] serial: imx: only set dma_is_rxing when DMA starts
From: Uwe Kleine-König @ 2017-09-21 18:15 UTC (permalink / raw)
To: Martyn Welch
Cc: Greg Kroah-Hartman, Nandor Han, Romain Perier, linux-serial,
linux-arm-kernel, linux-kernel, Fabio Estevam
In-Reply-To: <1506010697-22114-3-git-send-email-martyn.welch@collabora.co.uk>
On Thu, Sep 21, 2017 at 05:18:13PM +0100, Martyn Welch wrote:
> From: Romain Perier <romain.perier@collabora.com>
>
> The variable dma_is_rxing is currently set to 1 in imx_disable_rx_int().
> This is problematic as:
>
> - whilst imx_disable_rx_int() is currently always called before
> start_rx_dma() this dependency isn't obvious.
> - start_rx_dma() does error checking and might exit without
> enabling DMA. Currently this will result in dma_is_rxing suggesting
> that DMA is being used for recieving.
>
> To avoid these issues, move the setting of dma_is_rxing to
> start_rx_dma() when appropriate.
>
> Signed-off-by: Romain Perier <romain.perier@collabora.com>
> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Thanks
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply
* [PATCH v3 6/6] serial: imx: Fix imx_shutdown procedure
From: Martyn Welch @ 2017-09-21 16:18 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Nandor Han, Romain Perier, linux-serial, linux-arm-kernel,
linux-kernel, u.kleine-koenig, Fabio Estevam, Martyn Welch
In-Reply-To: <1506010697-22114-1-git-send-email-martyn.welch@collabora.co.uk>
From: Nandor Han <nandor.han@ge.com>
In some cases, it looks that interrupts can happen after the dma was
disabled and port was not yet shutdown. This will result in interrupts
handled by imx_rxint.
This commits updates the shutdown function to ensure that underlying
components are disabled in the right order. This disables RX and TX
blocks, then it disabled interrupts. In case DMA is enabled, it disables
DMA and free corresponding resources. It disables UART port and stop
clocks.
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
---
drivers/tty/serial/imx.c | 34 +++++++++++++++-------------------
1 file changed, 15 insertions(+), 19 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 256b128..393c1c0 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1368,44 +1368,40 @@ static void imx_shutdown(struct uart_port *port)
unsigned long temp;
unsigned long flags;
- if (sport->dma_is_enabled) {
- sport->dma_is_rxing = 0;
- sport->dma_is_txing = 0;
- dmaengine_terminate_sync(sport->dma_chan_tx);
- dmaengine_terminate_sync(sport->dma_chan_rx);
-
+ if (!sport->port.suspended) {
spin_lock_irqsave(&sport->port.lock, flags);
imx_stop_tx(port);
imx_stop_rx(port);
- imx_disable_dma(sport);
+
+ if (sport->dma_is_inited && sport->dma_is_enabled)
+ imx_disable_dma(sport);
+
spin_unlock_irqrestore(&sport->port.lock, flags);
imx_uart_dma_exit(sport);
}
- mctrl_gpio_disable_ms(sport->gpios);
-
spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR2);
- temp &= ~(UCR2_TXEN);
+ temp &= ~(UCR2_TXEN | UCR2_RXEN);
writel(temp, sport->port.membase + UCR2);
+ temp = readl(sport->port.membase + UCR4);
+ temp &= ~UCR4_OREN;
+ writel(temp, sport->port.membase + UCR4);
spin_unlock_irqrestore(&sport->port.lock, flags);
- /*
- * Stop our timer.
- */
- del_timer_sync(&sport->timer);
+ mctrl_gpio_disable_ms(sport->gpios);
- /*
- * Disable all interrupts, port and break condition.
- */
+ /* Stop our timer. */
+ del_timer_sync(&sport->timer);
+ /* Disable port. */
spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR1);
- temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
-
+ temp &= ~UCR1_UARTEN;
writel(temp, sport->port.membase + UCR1);
spin_unlock_irqrestore(&sport->port.lock, flags);
+ /* Disable clocks. */
clk_disable_unprepare(sport->clk_per);
clk_disable_unprepare(sport->clk_ipg);
}
--
1.8.3.1
^ permalink raw reply related
* [PATCH v3 5/6] serial: imx: update the stop rx,tx procedures
From: Martyn Welch @ 2017-09-21 16:18 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Nandor Han, Romain Perier, linux-serial, linux-arm-kernel,
linux-kernel, u.kleine-koenig, Fabio Estevam, Martyn Welch
In-Reply-To: <1506010697-22114-1-git-send-email-martyn.welch@collabora.co.uk>
From: Nandor Han <nandor.han@ge.com>
According to "Documentation/serial/driver" both procedures should stop
receiving or sending data. Based on this the procedures should stop the
activity regardless if DMA is enabled or not.
This commit updates both imx_stop_{rx|tx} procedures to stop the
activity and disable the interrupts related to that.
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
---
drivers/tty/serial/imx.c | 36 +++++++++++++++++-------------------
1 file changed, 17 insertions(+), 19 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index ed02783..256b128 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -388,15 +388,14 @@ static void imx_stop_tx(struct uart_port *port)
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
- /*
- * We are maybe in the SMP context, so if the DMA TX thread is running
- * on other cpu, we have to wait for it to finish.
- */
- if (sport->dma_is_enabled && sport->dma_is_txing)
- return;
+ sport->tx_bytes = 0;
+
+ if (sport->dma_is_enabled)
+ imx_stop_tx_dma(sport);
temp = readl(port->membase + UCR1);
- writel(temp & ~UCR1_TXMPTYEN, port->membase + UCR1);
+ temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN | UCR1_RTSDEN);
+ writel(temp, port->membase + UCR1);
/* in rs485 mode disable transmitter if shifter is empty */
if (port->rs485.flags & SER_RS485_ENABLED &&
@@ -423,21 +422,20 @@ static void imx_stop_rx(struct uart_port *port)
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
- if (sport->dma_is_enabled && sport->dma_is_rxing) {
- if (sport->port.suspended) {
- dmaengine_terminate_all(sport->dma_chan_rx);
- sport->dma_is_rxing = 0;
- } else {
- return;
- }
- }
+ if (sport->dma_is_enabled)
+ imx_stop_rx_dma(sport);
+
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~UCR1_RRDYEN;
+ writel(temp, sport->port.membase + UCR1);
temp = readl(sport->port.membase + UCR2);
- writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2);
+ temp &= ~UCR2_ATEN;
+ writel(temp, sport->port.membase + UCR2);
- /* disable the `Receiver Ready Interrrupt` */
- temp = readl(sport->port.membase + UCR1);
- writel(temp & ~UCR1_RRDYEN, sport->port.membase + UCR1);
+ temp = readl(sport->port.membase + UCR3);
+ temp &= ~UCR3_AWAKEN;
+ writel(temp, sport->port.membase + UCR3);
}
/*
--
1.8.3.1
^ permalink raw reply related
* [PATCH v3 4/6] serial: imx: unmap sg buffers when DMA channel is released
From: Martyn Welch @ 2017-09-21 16:18 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Nandor Han, Romain Perier, linux-serial, linux-arm-kernel,
linux-kernel, u.kleine-koenig, Fabio Estevam, Martyn Welch
In-Reply-To: <1506010697-22114-1-git-send-email-martyn.welch@collabora.co.uk>
From: Nandor Han <nandor.han@ge.com>
This commits unmaps sg buffers when the DMA channel is released. It also
sets to zero `dma_is_rxing` and `dma_is_txing` to state that the
corresponding channels cannot transmit/receive data, as these are
disabled.
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
---
drivers/tty/serial/imx.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 2fb3210..ed02783 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -357,6 +357,12 @@ static void imx_stop_tx_dma(struct imx_port *sport)
temp = readl(sport->port.membase + UCR1);
temp &= ~UCR1_TDMAEN;
writel(temp, sport->port.membase + UCR1);
+
+ if (sport->dma_is_txing) {
+ dma_unmap_sg(sport->port.dev, &sport->tx_sgl[0],
+ sport->dma_tx_nents, DMA_TO_DEVICE);
+ sport->dma_is_txing = 0;
+ }
}
static void imx_stop_rx_dma(struct imx_port *sport)
@@ -366,6 +372,12 @@ static void imx_stop_rx_dma(struct imx_port *sport)
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_RDMAEN | UCR1_ATDMAEN);
writel(temp, sport->port.membase + UCR1);
+
+ if (sport->dma_is_rxing) {
+ dma_unmap_sg(sport->port.dev, &sport->rx_sgl, 1,
+ DMA_FROM_DEVICE);
+ sport->dma_is_rxing = 0;
+ }
}
/*
--
1.8.3.1
^ permalink raw reply related
* [PATCH v3 3/6] serial: imx: Simplify DMA disablement
From: Martyn Welch @ 2017-09-21 16:18 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Nandor Han, Romain Perier, linux-serial, linux-arm-kernel,
linux-kernel, u.kleine-koenig, Fabio Estevam, Martyn Welch
In-Reply-To: <1506010697-22114-1-git-send-email-martyn.welch@collabora.co.uk>
From: Nandor Han <nandor.han@ge.com>
This commits simplify the function imx_disable_dma() by moving
the code for disabling RX and TX DMAs to dedicated functions.
This is a preparation for the next commit.
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
---
drivers/tty/serial/imx.c | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 7835279..2fb3210 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -350,6 +350,24 @@ static void imx_port_rts_auto(struct imx_port *sport, unsigned long *ucr2)
*ucr2 |= UCR2_CTSC;
}
+static void imx_stop_tx_dma(struct imx_port *sport)
+{
+ unsigned long temp;
+
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~UCR1_TDMAEN;
+ writel(temp, sport->port.membase + UCR1);
+}
+
+static void imx_stop_rx_dma(struct imx_port *sport)
+{
+ unsigned long temp;
+
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~(UCR1_RDMAEN | UCR1_ATDMAEN);
+ writel(temp, sport->port.membase + UCR1);
+}
+
/*
* interrupts disabled on entry
*/
@@ -1217,13 +1235,8 @@ static void imx_enable_dma(struct imx_port *sport)
static void imx_disable_dma(struct imx_port *sport)
{
- unsigned long temp;
-
- /* clear UCR1 */
- temp = readl(sport->port.membase + UCR1);
- temp &= ~(UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN);
- writel(temp, sport->port.membase + UCR1);
-
+ imx_stop_rx_dma(sport);
+ imx_stop_tx_dma(sport);
imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
sport->dma_is_enabled = 0;
--
1.8.3.1
^ permalink raw reply related
* [PATCH v3 2/6] serial: imx: only set dma_is_rxing when DMA starts
From: Martyn Welch @ 2017-09-21 16:18 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Nandor Han, Romain Perier, linux-serial, linux-arm-kernel,
linux-kernel, u.kleine-koenig, Fabio Estevam, Martyn Welch
In-Reply-To: <1506010697-22114-1-git-send-email-martyn.welch@collabora.co.uk>
From: Romain Perier <romain.perier@collabora.com>
The variable dma_is_rxing is currently set to 1 in imx_disable_rx_int().
This is problematic as:
- whilst imx_disable_rx_int() is currently always called before
start_rx_dma() this dependency isn't obvious.
- start_rx_dma() does error checking and might exit without
enabling DMA. Currently this will result in dma_is_rxing suggesting
that DMA is being used for recieving.
To avoid these issues, move the setting of dma_is_rxing to
start_rx_dma() when appropriate.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
---
drivers/tty/serial/imx.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index d90dae3..7835279 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -714,8 +714,6 @@ static void imx_disable_rx_int(struct imx_port *sport)
{
unsigned long temp;
- sport->dma_is_rxing = 1;
-
/* disable the receiver ready and aging timer interrupts */
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_RRDYEN);
@@ -1074,6 +1072,7 @@ static int start_rx_dma(struct imx_port *sport)
desc->callback_param = sport;
dev_dbg(dev, "RX: prepare for the DMA.\n");
+ sport->dma_is_rxing = 1;
sport->rx_cookie = dmaengine_submit(desc);
dma_async_issue_pending(chan);
return 0;
--
1.8.3.1
^ permalink raw reply related
* [PATCH v3 1/6] serial: imx: remove CTSC and CTS handling from imx_disable_dma
From: Martyn Welch @ 2017-09-21 16:18 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Nandor Han, Romain Perier, linux-serial, linux-arm-kernel,
linux-kernel, u.kleine-koenig, Fabio Estevam, Martyn Welch
In-Reply-To: <1506010697-22114-1-git-send-email-martyn.welch@collabora.co.uk>
From: Nandor Han <nandor.han@ge.com>
The CTSC and CTS bits affect operation of the CTS/RTS hardware flow
control signal (depending on whether the device is in DCE or DTE mode) and
are not related to DMA. When in RS-232 mode, the driver is using the
automatic CTSC control based on a rxFIFO fill level unless the state of
the CTS signal is explictly set via an ioctl call.
Previous improvements to the imx serial driver have resulted on
imx_disable_dma() only being called on shutdown, by which point the
serial core has already correctly deasserted CTS.
Testing shows that without this handling in imx_disable_dma() the CTS
signal state is set correctly when the device is open and TIOCM_RTS is
set/cleared via the TIOCMGET ioctl. The CTS signal is also correctly
deasserted when the device file is closed.
When in RS-485 mode, the driver uses the CTS signal very differently and
appears to control it via calls to imx_port_rts_active() and
imx_port_rts_inactive().
This configuration of the CTSC and CTS bits are therefore not needed.
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
---
drivers/tty/serial/imx.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index fe368a4..d90dae3 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1225,11 +1225,6 @@ static void imx_disable_dma(struct imx_port *sport)
temp &= ~(UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN);
writel(temp, sport->port.membase + UCR1);
- /* clear UCR2 */
- temp = readl(sport->port.membase + UCR2);
- temp &= ~(UCR2_CTSC | UCR2_CTS | UCR2_ATEN);
- writel(temp, sport->port.membase + UCR2);
-
imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
sport->dma_is_enabled = 0;
--
1.8.3.1
^ permalink raw reply related
* [PATCH v3 0/6] serial: imx: various improvements
From: Martyn Welch @ 2017-09-21 16:18 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Nandor Han, Romain Perier, linux-serial, linux-arm-kernel,
linux-kernel, u.kleine-koenig, Fabio Estevam, Martyn Welch
During shutdown when a userspace service is disabled (which generates
an uart close), we got kernel crashes in the imx serial driver :
[ 1257.657423] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf0938000
[ 1257.665122] pgd = ecf20000
[ 1257.667838] [f0938000] *pgd=de819811, *pte=53fc0653, *ppte=53fc0453
[ 1257.674179] Internal error: : 1008 [#1] SMP ARM
[ 1257.678722] Modules linked in:
[ 1257.681807] CPU: 0 PID: 3850 Comm: emerald_acq Not tainted 4.8.0 #10
[ 1257.688168] Hardware name: Freescale i.MX53 (Device Tree Support)
[ 1257.694269] task: e5c48000 task.stack: ed0b4000
[ 1257.698827] PC is at imx_rxint+0x5c/0x228
[ 1257.702859] LR is at lock_acquired+0x494/0x57c
[ 1257.707312] pc : [<80484884>] lr : [<80173aa0>] psr: 20070193
[ 1257.707312] sp : ed0b5c60 ip : ed0b5be8 fp : ed0b5c9c
[ 1257.718795] r10: 00000000 r9 : 00000000 r8 : 00000004
[ 1257.724027] r7 : 00000030 r6 : ee83e258 r5 : 00000000 r4 : ee09f410
[ 1257.730561] r3 : 0015c30c r2 : f0938000 r1 : 00000135 r0 : 40070193
[ 1257.737099] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
[ 1257.744327] Control: 10c5387d Table: dcf20019 DAC: 00000051
[ 1257.750080] Process emerald_acq (pid: 3850, stack limit = 0xed0b4210)
[ 1257.756527] Stack: (0xed0b5c60 to 0xed0b6000)
[ 1257.760898] 5c60: ed0b5cf4 40070193 80175f64 80faf384 e5c484c0 ee09f410 00007240 00005099
[ 1257.769087] 5c80: 00000030 00000030 80e025c4 00000000 ed0b5cf4 ed0b5ca0 80485b18 80484834
[ 1257.777275] 5ca0: 8012fe26 00000000 00000000 60070193 ee81b210 00000001 ed0b5cdc ed0b5cc8
[ 1257.785463] 5cc0: 80171d28 80171c3c 80e2d634 ee096740 ee81b200 ee81b210 00000001 00000030
[ 1257.793651] 5ce0: 80e025c4 00000000 ed0b5d34 ed0b5cf8 80182f10 804857fc e5c484c0 00000002
[ 1257.801839] 5d00: ee81b200 ed0b5d3c 60070193 ee81b200 ee81b200 ee81b210 00000001 ee81c400
[ 1257.810027] 5d20: 00000001 00000008 ed0b5d54 ed0b5d38 801832d8 80182ed0 808f4b60 00000000
[ 1257.818216] 5d40: ee81b200 ee81b260 ed0b5d74 ed0b5d58 8018335c 801832b8 ee81b200 ee81b260
[ 1257.826404] 5d60: ee81b210 00000001 ed0b5d94 ed0b5d78 80186ba0 80183320 80debe8c 00000030
[ 1257.834592] 5d80: 00000000 00000001 ed0b5da4 ed0b5d98 80182420 80186af4 ed0b5dcc ed0b5da8
[ 1257.842780] 5da0: 801827a0 801823fc 00000000 80e8350c 00000020 00000001 ed0b5df8 00000001
[ 1257.850968] 5dc0: ed0b5df4 ed0b5dd0 80101530 8018274c 808f4bec 20070013 ffffffff ed0b5e2c
[ 1257.859156] 5de0: ee09f410 ed0b4000 ed0b5e5c ed0b5df8 808f55f0 801014c8 00000001 00000130
[ 1257.867345] 5e00: 00000000 e5c48000 60070013 ee09f410 00000000 60070013 ee09f410 ed06a640
[ 1257.875533] 5e20: 00000008 ed0b5e5c ed0b5df0 ed0b5e48 801756a8 808f4bec 20070013 ffffffff
[ 1257.883722] 5e40: 00000051 7f000000 ee09f410 00000b01 ed0b5e7c ed0b5e60 80485d74 808f4bb4
[ 1257.891912] 5e60: ee83e258 ee09f410 ee83e3a4 80e2d634 ed0b5ea4 ed0b5e80 8047f514 80485c70
[ 1257.900100] 5e80: ee83e258 ed375000 ee09f410 ee83e310 ee83e3ac ed06a640 ed0b5ecc ed0b5ea8
[ 1257.908288] 5ea0: 80481304 8047f400 ed375000 eeabce60 00000000 ee7973e8 00000000 ed06a640
[ 1257.916477] 5ec0: ed0b5f14 ed0b5ed0 80462fe0 804811ac 00000008 eeabce60 00000001 00000001
[ 1257.924665] 5ee0: 00000000 802713dc ed0b5f54 ed06a640 eeabce60 ee2c6910 ee7973e8 00000000
[ 1257.932854] 5f00: eeabce60 00000008 ed0b5f54 ed0b5f18 80271404 80462ee8 00000000 00000000
[ 1257.941044] 5f20: ed06c640 ed06a648 ed0b5f4c e5c48400 00000000 80e84054 e5c48440 e5c48000
[ 1257.949232] 5f40: 00000000 00000000 ed0b5f64 ed0b5f58 802715c4 80271378 ed0b5f8c ed0b5f68
[ 1257.957420] 5f60: 80146034 802715b8 00000000 ed0b4000 ed0b5fb0 801086c4 801086c4 ed0b4000
[ 1257.965610] 5f80: ed0b5fac ed0b5f90 8010cc68 80145f78 0054756c 00000000 767474b4 00000006
[ 1257.973798] 5fa0: 00000000 ed0b5fb0 80108548 8010cbc4 00000000 76f2a084 00000002 00000000
[ 1257.981986] 5fc0: 0054756c 00000000 767474b4 00000006 0225e880 00000000 76f36000 7e836d34
[ 1257.990175] 5fe0: 00000000 7e836d10 76f2a4c0 76a5db68 80070010 00000062 00000000 00000000
[ 1257.998357] Backtrace:
[ 1258.000837] [<80484828>] (imx_rxint) from [<80485b18>] (imx_int+0x328/0x474)
[ 1258.007892] r10:00000000 r9:80e025c4 r8:00000030 r7:00000030 r6:00005099 r5:00007240
[ 1258.015815] r4:ee09f410
[ 1258.018386] [<804857f0>] (imx_int) from [<80182f10>] (__handle_irq_event_percpu+0x4c/0x3e8)
[ 1258.026742] r10:00000000 r9:80e025c4 r8:00000030 r7:00000001 r6:ee81b210 r5:ee81b200
[ 1258.034664] r4:ee096740
[ 1258.037226] [<80182ec4>] (__handle_irq_event_percpu) from [<801832d8>] (handle_irq_event_percpu+0x2c/0x68)
[ 1258.046885] r10:00000008 r9:00000001 r8:ee81c400 r7:00000001 r6:ee81b210 r5:ee81b200
[ 1258.054806] r4:ee81b200
[ 1258.057369] [<801832ac>] (handle_irq_event_percpu) from [<8018335c>] (handle_irq_event+0x48/0x6c)
[ 1258.066246] r5:ee81b260 r4:ee81b200
[ 1258.069866] [<80183314>] (handle_irq_event) from [<80186ba0>] (handle_level_irq+0xb8/0x154)
[ 1258.078222] r7:00000001 r6:ee81b210 r5:ee81b260 r4:ee81b200
[ 1258.083961] [<80186ae8>] (handle_level_irq) from [<80182420>] (generic_handle_irq+0x30/0x44)
[ 1258.092404] r7:00000001 r6:00000000 r5:00000030 r4:80debe8c
[ 1258.098143] [<801823f0>] (generic_handle_irq) from [<801827a0>] (__handle_domain_irq+0x60/0xc8)
[ 1258.106854] [<80182740>] (__handle_domain_irq) from [<80101530>] (tzic_handle_irq+0x74/0x9c)
[ 1258.115297] r9:00000001 r8:ed0b5df8 r7:00000001 r6:00000020 r5:80e8350c r4:00000000
[ 1258.123139] [<801014bc>] (tzic_handle_irq) from [<808f55f0>] (__irq_svc+0x70/0x98)
[ 1258.130715] Exception stack(0xed0b5df8 to 0xed0b5e40)
[ 1258.135773] 5de0: 00000001 00000130
[ 1258.143962] 5e00: 00000000 e5c48000 60070013 ee09f410 00000000 60070013 ee09f410 ed06a640
[ 1258.152151] 5e20: 00000008 ed0b5e5c ed0b5df0 ed0b5e48 801756a8 808f4bec 20070013 ffffffff
[ 1258.160333] r9:ed0b4000 r8:ee09f410 r7:ed0b5e2c r6:ffffffff r5:20070013 r4:808f4bec
[ 1258.168188] [<808f4ba8>] (_raw_spin_unlock_irqrestore) from [<80485d74>] (imx_shutdown+0x110/0x214)
[ 1258.177239] r5:00000b01 r4:ee09f410
[ 1258.180860] [<80485c64>] (imx_shutdown) from [<8047f514>] (uart_shutdown+0x120/0x17c)
[ 1258.188695] r7:80e2d634 r6:ee83e3a4 r5:ee09f410 r4:ee83e258
[ 1258.194434] [<8047f3f4>] (uart_shutdown) from [<80481304>] (uart_close+0x164/0x254)
[ 1258.202096] r9:ed06a640 r8:ee83e3ac r7:ee83e310 r6:ee09f410 r5:ed375000 r4:ee83e258
[ 1258.209948] [<804811a0>] (uart_close) from [<80462fe0>] (tty_release+0x104/0x498)
[ 1258.217439] r9:ed06a640 r8:00000000 r7:ee7973e8 r6:00000000 r5:eeabce60 r4:ed375000
[ 1258.225285] [<80462edc>] (tty_release) from [<80271404>] (__fput+0x98/0x1e8)
[ 1258.232339] r10:00000008 r9:eeabce60 r8:00000000 r7:ee7973e8 r6:ee2c6910 r5:eeabce60
[ 1258.240261] r4:ed06a640
[ 1258.242823] [<8027136c>] (__fput) from [<802715c4>] (____fput+0x18/0x1c)
[ 1258.249528] r10:00000000 r9:00000000 r8:e5c48000 r7:e5c48440 r6:80e84054 r5:00000000
[ 1258.257450] r4:e5c48400
[ 1258.260021] [<802715ac>] (____fput) from [<80146034>] (task_work_run+0xc8/0xf8)
[ 1258.267352] [<80145f6c>] (task_work_run) from [<8010cc68>] (do_work_pending+0xb0/0xd0)
[ 1258.275274] r9:ed0b4000 r8:801086c4 r7:801086c4 r6:ed0b5fb0 r5:ed0b4000 r4:00000000
[ 1258.283116] [<8010cbb8>] (do_work_pending) from [<80108548>] (slow_work_pending+0xc/0x20)
[ 1258.291298] r7:00000006 r6:767474b4 r5:00000000 r4:0054756c
[ 1258.297037] Code: e5943094 e594202c e2833001 e5843094 (e592a000)
[ 1258.303148] ---[ end trace 7a50198148a54c4d ]---
[ 1258.307776] Kernel panic - not syncing: Fatal exception in interrupt
[ 1258.314160] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
After investigations, we found several issues:
It looks that interrupts can happen after the dma was disabled and
port was not yet shutdown. This will result in interrupts handled by
imx_rxint. Analyzed the imx_shutdown function, and found that:
- Some interrupts were not disabled during shutdown (AWAKEN, UCR4_OREN,
UCR1_TRDYEN)
- TX was not stopped in all situations (if dma is enabled and
transmitting)
- Using deprecated dmaengine_terminate_all method.
- Trying to close DMA channels several times.
This set of patches proposes fix regarding these issues and problems we
found during debugging.
Changes in v3:
- Re-worked commit message of `dma_is_rxing` patch.
- Correct patch order to avoid build failure.
- Added information to CTSC and CTS handling patch commit message
Changes in v2:
- Re-worked assignment of `dma_is_rxing` in patch 1/7
- Removed commit "serial: imx: move log from error to debug type"
- Removed commit "serial: imx: init dma_is_{rx|tx}ing variables"
- Improved commit log for "serial: imx: Simplify DMA disablement"
and splitted it in two commits, with one for CTSC and CTS
- Added commit "serial: imx: remove CTSC and CTS handling"
- Fixed typo in commit "unmap sg buffers when DMA channel is released"
- Re-worded commit log for "serial: imx: update the stop rx,tx procedures" and
removed forward declaration
- Fixed typo in commit "serial: imx: Fix imx_shutdown procedure" and simplified
locking
Nandor Han (5):
serial: imx: remove CTSC and CTS handling from imx_disable_dma
serial: imx: Simplify DMA disablement
serial: imx: unmap sg buffers when DMA channel is released
serial: imx: update the stop rx,tx procedures
serial: imx: Fix imx_shutdown procedure
Romain Perier (1):
serial: imx: only set dma_is_rxing when DMA starts
drivers/tty/serial/imx.c | 117 ++++++++++++++++++++++++++---------------------
1 file changed, 65 insertions(+), 52 deletions(-)
--
1.8.3.1
^ permalink raw reply
* Re: [PATCH] serial: sh-sci: Support for variable HSCIF hardware RX timeout
From: Geert Uytterhoeven @ 2017-09-21 13:47 UTC (permalink / raw)
To: Ulrich Hecht
Cc: Linux-Renesas, Wolfram Sang, linux-serial@vger.kernel.org,
Magnus Damm
In-Reply-To: <1505835844-3320-1-git-send-email-ulrich.hecht+renesas@gmail.com>
Hi Ulrich,
On Tue, Sep 19, 2017 at 5:44 PM, Ulrich Hecht
<ulrich.hecht+renesas@gmail.com> wrote:
> HSCIF has facilities that allow changing the timeout after which an RX
> interrupt is triggered even if the FIFO is not filled. This patch allows
> changing the default (15 bits of silence) using the existing sysfs
> attribute "rx_fifo_timeout".
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Thanks for your patch!
> --- a/drivers/tty/serial/sh-sci.c
> +++ b/drivers/tty/serial/sh-sci.c
> @@ -152,6 +152,7 @@ struct sci_port {
> int rx_trigger;
> struct timer_list rx_fifo_timer;
> int rx_fifo_timeout;
> + u16 hscif_tot;
Shouldn't this field be reset to zero in sci_init_single(), like
rx_fifo_timeout?
> @@ -1107,8 +1108,14 @@ static ssize_t rx_fifo_timeout_show(struct device *dev,
> {
> struct uart_port *port = dev_get_drvdata(dev);
> struct sci_port *sci = to_sci_port(port);
> + u16 v;
int, to preserve all bits from rx_fifo_timeout.
>
> - return sprintf(buf, "%d\n", sci->rx_fifo_timeout);
> + if (port->type == PORT_HSCIF)
> + v = sci->hscif_tot >> HSSCR_TOT_SHIFT;
> + else
> + v = sci->rx_fifo_timeout;
> +
> + return sprintf(buf, "%d\n", v);
> }
> @@ -1124,11 +1131,19 @@ static ssize_t rx_fifo_timeout_store(struct device *dev,
> ret = kstrtol(buf, 0, &r);
> if (ret)
> return ret;
> - sci->rx_fifo_timeout = r;
> - scif_set_rtrg(port, 1);
> - if (r > 0)
> - setup_timer(&sci->rx_fifo_timer, rx_fifo_timer_fn,
> - (unsigned long)sci);
> +
> + if (port->type == PORT_HSCIF) {
> + if (r < 0 || r > 3)
> + return -EINVAL;
> + sci->hscif_tot = r << HSSCR_TOT_SHIFT;
> + } else {
> + sci->rx_fifo_timeout = r;
> + scif_set_rtrg(port, 1);
> + if (r > 0)
> + setup_timer(&sci->rx_fifo_timer, rx_fifo_timer_fn,
> + (unsigned long)sci);
> + }
So this sysfs parameter uses slightly different units depending on serial port
type (HSCIF is in 15 Elementary Time Units aka 1.5 frames, SCIF[AB] is in
frames). Do we care?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* [patch v9 4/4] Documentation: jtag: Add ABI documentation
From: Oleksandr Shamray @ 2017-09-21 9:25 UTC (permalink / raw)
To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, arnd-r2nGTMty4D4
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, openbmc-uLR06cmDAlY/bJ5BZ2RsiQ,
joel-U3u1mxZcP9KHXe+LvDLADg, jiri-rHqAuBHg3fBzbRFIqnYvSA,
tklauser-93Khv+1bN0NyDzI6CaY1VQ,
linux-serial-u79uwXL29TY76Z2rM5mHXA, mec-WqBc5aa1uDFeoWH0uzbU5w,
vadimp-VPRAkNaXOzVWk0Htik3J/w,
system-sw-low-level-VPRAkNaXOzVWk0Htik3J/w,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
openocd-devel-owner-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
linux-api-u79uwXL29TY76Z2rM5mHXA, davem-fT/PcQaiUtIeIZ0/mPfg9Q,
mchehab-DgEjT+Ai2ygdnm+yROfE0A, Oleksandr Shamray
In-Reply-To: <1505985932-27568-1-git-send-email-oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Added document that describe the ABI for JTAG class drivrer
Signed-off-by: Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
---
v8->v9
v7->v8
v6->v7
Comments pointed by Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>
- Added jtag-cdev documentation to Documentation/ABI/testing folder
---
Documentation/ABI/testing/jatg-cdev | 27 +++++++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 28 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/jatg-cdev
diff --git a/Documentation/ABI/testing/jatg-cdev b/Documentation/ABI/testing/jatg-cdev
new file mode 100644
index 0000000..14a3610
--- /dev/null
+++ b/Documentation/ABI/testing/jatg-cdev
@@ -0,0 +1,27 @@
+What: /dev/jtag[0-9]+
+Date: September 2017
+KernelVersion: 4.14
+Contact: oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org
+Description:
+ The character device files /dev/jtag* are the interface
+ between JTAG master interfase and userspace.
+
+ The ioctl(2)-based ABI is defined and documented in
+ [include/uapi]<linux/jtag.h>.
+
+ The following file operations are supported:
+
+ open(2)
+ The argument flag currently support only one access
+ mode O_RDWR.
+
+ ioctl(2)
+ Initiate various actions.
+ See the inline documentation in [include/uapi]<linux/jtag.h>
+ for descriptions of all ioctls.
+
+ close(2)
+ Stops and free up the I/O contexts that was associated
+ with the file descriptor.
+
+Users: TBD
\ No newline at end of file
diff --git a/MAINTAINERS b/MAINTAINERS
index bfdfa94..dfcf49c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7300,6 +7300,7 @@ F: include/linux/jtag.h
F: include/uapi/linux/jtag.h
F: drivers/jtag/
F: Documentation/devicetree/bindings/jtag/
+F: Documentation/ABI/testing/jtag-cdev
K10TEMP HARDWARE MONITORING DRIVER
M: Clemens Ladisch <clemens-P6GI/4k7KOmELgA04lAiVw@public.gmane.org>
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [patch v9 3/4] Documentation: jtag: Add bindings for Aspeed SoC 24xx and 25xx families JTAG master driver
From: Oleksandr Shamray @ 2017-09-21 9:25 UTC (permalink / raw)
To: gregkh, arnd
Cc: linux-kernel, linux-arm-kernel, devicetree, openbmc, joel, jiri,
tklauser, linux-serial, mec, vadimp, system-sw-low-level, robh+dt,
openocd-devel-owner, linux-api, davem, mchehab, Oleksandr Shamray,
Jiri Pirko
In-Reply-To: <1505985932-27568-1-git-send-email-oleksandrs@mellanox.com>
It has been tested on Mellanox system with BMC equipped with
Aspeed 2520 SoC for programming CPLD devices.
Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Rob Herring <robh@kernel.org>
---
v8->v9
v7->v8
Comments pointed by pointed by Joel Stanley <joel.stan@gmail.com>
- Change compatible string to ast2400 and ast2000
V6->v7
Comments pointed by Tobias Klauser <tklauser@distanz.ch>
- Fix spell "Doccumentation" -> "Documentation"
v5->v6
Comments pointed by Tobias Klauser <tklauser@distanz.ch>
- Small nit: s/documentation/Documentation/
v4->v5
V3->v4
Comments pointed by Rob Herring <robh@kernel.org>
- delete unnecessary "status" and "reg-shift" descriptions in
bndings file
v2->v3
Comments pointed by Rob Herring <robh@kernel.org>
- split Aspeed jtag driver and binding to sepatrate patches
- delete unnecessary "status" and "reg-shift" descriptions in
bndings file
---
.../devicetree/bindings/jtag/aspeed-jtag.txt | 18 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 19 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
diff --git a/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
new file mode 100644
index 0000000..8cfc610
--- /dev/null
+++ b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
@@ -0,0 +1,18 @@
+Aspeed JTAG driver for ast2400 and ast2500 SoC
+
+Required properties:
+- compatible: Should be one of
+ - "aspeed,ast2400-jtag"
+ - "aspeed,ast2500-jtag"
+- reg contains the offset and length of the JTAG memory
+ region
+- clocks root clock of bus, should reference the APB clock
+- interrupts should contain JTAG controller interrupt
+
+Example:
+jtag: jtag@1e6e4000 {
+ compatible = "aspeed,ast2500-jtag";
+ reg = <0x1e6e4000 0x1c>;
+ clocks = <&clk_apb>;
+ interrupts = <43>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 141aeaf..bfdfa94 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7299,6 +7299,7 @@ S: Maintained
F: include/linux/jtag.h
F: include/uapi/linux/jtag.h
F: drivers/jtag/
+F: Documentation/devicetree/bindings/jtag/
K10TEMP HARDWARE MONITORING DRIVER
M: Clemens Ladisch <clemens@ladisch.de>
--
1.7.1
^ permalink raw reply related
* [patch v9 2/4] drivers: jtag: Add Aspeed SoC 24xx and 25xx families JTAG master driver
From: Oleksandr Shamray @ 2017-09-21 9:25 UTC (permalink / raw)
To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, arnd-r2nGTMty4D4
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, openbmc-uLR06cmDAlY/bJ5BZ2RsiQ,
joel-U3u1mxZcP9KHXe+LvDLADg, jiri-rHqAuBHg3fBzbRFIqnYvSA,
tklauser-93Khv+1bN0NyDzI6CaY1VQ,
linux-serial-u79uwXL29TY76Z2rM5mHXA, mec-WqBc5aa1uDFeoWH0uzbU5w,
vadimp-VPRAkNaXOzVWk0Htik3J/w,
system-sw-low-level-VPRAkNaXOzVWk0Htik3J/w,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
openocd-devel-owner-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
linux-api-u79uwXL29TY76Z2rM5mHXA, davem-fT/PcQaiUtIeIZ0/mPfg9Q,
mchehab-DgEjT+Ai2ygdnm+yROfE0A, Oleksandr Shamray, Jiri Pirko
In-Reply-To: <1505985932-27568-1-git-send-email-oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Driver adds support of Aspeed 2500/2400 series SOC JTAG master controller.
Driver implements the following jtag ops:
- freq_get;
- freq_set;
- status_get;
- idle;
- xfer;
It has been tested on Mellanox system with BMC equipped with
Aspeed 2520 SoC for programming CPLD devices.
Signed-off-by: Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Signed-off-by: Jiri Pirko <jiri-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
---
V8->v9
Comments pointed by Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
- add *data parameter to xfer function prototype
v7->v8
Comments pointed by Joel Stanley <joel.stan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- aspeed_jtag_init replace goto to return;
- change input variables type from __u32 to u32
in functios freq_get, freq_set, status_get
- change sm_ variables type from char to u8
- in jatg_init add disable clocks on error case
- remove release_mem_region on error case
- remove devm_free_irq on jtag_deinit
- Fix misspelling Disabe/Disable
- Change compatible string to ast2400 and ast2000
v6->v7
Notifications from kbuild test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
- Add include <linux/types.h> to jtag-asapeed.c
v5->v6
v4->v5
Comments pointed by Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
- Added HAS_IOMEM dependence in Kconfig to avoid
"undefined reference to `devm_ioremap_resource'" error,
because in some arch this not supported
v3->v4
Comments pointed by Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
- change transaction pointer tdio type to __u64
- change internal status type from enum to __u32
v2->v3
v1->v2
Comments pointed by Greg KH <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
- change license type from GPLv2/BSD to GPLv2
Comments pointed by Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
- Add clk_prepare_enable/clk_disable_unprepare in clock init/deinit
- Change .compatible to soc-specific compatible names
aspeed,aspeed4000-jtag/aspeed5000-jtag
- Added dt-bindings
Comments pointed by Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
- Reorder functions and removed the forward declarations
- Add static const qualifier to state machine states transitions
- Change .compatible to soc-specific compatible names
aspeed,aspeed4000-jtag/aspeed5000-jtag
- Add dt-bindings
Comments pointed by Randy Dunlap <rdunlap-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
- Change module name jtag-aspeed in description in Kconfig
Comments pointed by kbuild test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
- Remove invalid include <asm/mach-types.h>
- add resource_size instead of calculation
---
drivers/jtag/Kconfig | 13 +
drivers/jtag/Makefile | 1 +
drivers/jtag/jtag-aspeed.c | 771 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 785 insertions(+), 0 deletions(-)
create mode 100644 drivers/jtag/jtag-aspeed.c
diff --git a/drivers/jtag/Kconfig b/drivers/jtag/Kconfig
index 0fad1a3..098beb0 100644
--- a/drivers/jtag/Kconfig
+++ b/drivers/jtag/Kconfig
@@ -14,3 +14,16 @@ menuconfig JTAG
To compile this driver as a module, choose M here: the module will
be called jtag.
+
+menuconfig JTAG_ASPEED
+ tristate "Aspeed SoC JTAG controller support"
+ depends on JTAG && HAS_IOMEM
+ ---help---
+ This provides a support for Aspeed JTAG device, equipped on
+ Aspeed SoC 24xx and 25xx families. Drivers allows programming
+ of hardware devices, connected to SoC through the JTAG interface.
+
+ If you want this support, you should say Y here.
+
+ To compile this driver as a module, choose M here: the module will
+ be called jtag-aspeed.
diff --git a/drivers/jtag/Makefile b/drivers/jtag/Makefile
index af37493..04a855e 100644
--- a/drivers/jtag/Makefile
+++ b/drivers/jtag/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_JTAG) += jtag.o
+obj-$(CONFIG_JTAG_ASPEED) += jtag-aspeed.o
diff --git a/drivers/jtag/jtag-aspeed.c b/drivers/jtag/jtag-aspeed.c
new file mode 100644
index 0000000..a8dd4f9
--- /dev/null
+++ b/drivers/jtag/jtag-aspeed.c
@@ -0,0 +1,771 @@
+/*
+ * drivers/jtag/jtag.c
+ *
+ * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2017 Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/jtag.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <uapi/linux/jtag.h>
+
+#define ASPEED_JTAG_DATA 0x00
+#define ASPEED_JTAG_INST 0x04
+#define ASPEED_JTAG_CTRL 0x08
+#define ASPEED_JTAG_ISR 0x0C
+#define ASPEED_JTAG_SW 0x10
+#define ASPEED_JTAG_TCK 0x14
+#define ASPEED_JTAG_EC 0x18
+
+#define ASPEED_JTAG_DATA_MSB 0x01
+#define ASPEED_JTAG_DATA_CHUNK_SIZE 0x20
+
+/* ASPEED_JTAG_CTRL: Engine Control */
+#define ASPEED_JTAG_CTL_ENG_EN BIT(31)
+#define ASPEED_JTAG_CTL_ENG_OUT_EN BIT(30)
+#define ASPEED_JTAG_CTL_FORCE_TMS BIT(29)
+#define ASPEED_JTAG_CTL_INST_LEN(x) ((x) << 20)
+#define ASPEED_JTAG_CTL_LASPEED_INST BIT(17)
+#define ASPEED_JTAG_CTL_INST_EN BIT(16)
+#define ASPEED_JTAG_CTL_DR_UPDATE BIT(10)
+#define ASPEED_JTAG_CTL_DATA_LEN(x) ((x) << 4)
+#define ASPEED_JTAG_CTL_LASPEED_DATA BIT(1)
+#define ASPEED_JTAG_CTL_DATA_EN BIT(0)
+
+/* ASPEED_JTAG_ISR : Interrupt status and enable */
+#define ASPEED_JTAG_ISR_INST_PAUSE BIT(19)
+#define ASPEED_JTAG_ISR_INST_COMPLETE BIT(18)
+#define ASPEED_JTAG_ISR_DATA_PAUSE BIT(17)
+#define ASPEED_JTAG_ISR_DATA_COMPLETE BIT(16)
+#define ASPEED_JTAG_ISR_INST_PAUSE_EN BIT(3)
+#define ASPEED_JTAG_ISR_INST_COMPLETE_EN BIT(2)
+#define ASPEED_JTAG_ISR_DATA_PAUSE_EN BIT(1)
+#define ASPEED_JTAG_ISR_DATA_COMPLETE_EN BIT(0)
+#define ASPEED_JTAG_ISR_INT_EN_MASK GENMASK(3, 0)
+#define ASPEED_JTAG_ISR_INT_MASK GENMASK(19, 16)
+
+/* ASPEED_JTAG_SW : Software Mode and Status */
+#define ASPEED_JTAG_SW_MODE_EN BIT(19)
+#define ASPEED_JTAG_SW_MODE_TCK BIT(18)
+#define ASPEED_JTAG_SW_MODE_TMS BIT(17)
+#define ASPEED_JTAG_SW_MODE_TDIO BIT(16)
+
+/* ASPEED_JTAG_TCK : TCK Control */
+#define ASPEED_JTAG_TCK_DIVISOR_MASK GENMASK(10, 0)
+#define ASPEED_JTAG_TCK_GET_DIV(x) ((x) & ASPEED_JTAG_TCK_DIVISOR_MASK)
+
+/* ASPEED_JTAG_EC : Controller set for go to IDLE */
+#define ASPEED_JTAG_EC_GO_IDLE BIT(0)
+
+#define ASPEED_JTAG_IOUT_LEN(len) (ASPEED_JTAG_CTL_ENG_EN |\
+ ASPEED_JTAG_CTL_ENG_OUT_EN |\
+ ASPEED_JTAG_CTL_INST_LEN(len))
+
+#define ASPEED_JTAG_DOUT_LEN(len) (ASPEED_JTAG_CTL_ENG_EN |\
+ ASPEED_JTAG_CTL_ENG_OUT_EN |\
+ ASPEED_JTAG_CTL_DATA_LEN(len))
+
+#define ASPEED_JTAG_TCK_WAIT 10
+#define ASPEED_JTAG_RESET_CNTR 10
+
+#define ASPEED_JTAG_NAME "jtag-aspeed"
+
+struct aspeed_jtag {
+ void __iomem *reg_base;
+ struct device *dev;
+ struct clk *pclk;
+ enum jtag_endstate status;
+ int irq;
+ u32 flag;
+ wait_queue_head_t jtag_wq;
+ bool is_open;
+};
+
+static char *end_status_str[] = {"idle", "ir pause", "drpause"};
+
+static u32 aspeed_jtag_read(struct aspeed_jtag *aspeed_jtag, u32 reg)
+{
+ return readl(aspeed_jtag->reg_base + reg);
+}
+
+static void
+aspeed_jtag_write(struct aspeed_jtag *aspeed_jtag, u32 val, u32 reg)
+{
+ writel(val, aspeed_jtag->reg_base + reg);
+}
+
+static int aspeed_jtag_freq_set(struct jtag *jtag, u32 freq)
+{
+ struct aspeed_jtag *aspeed_jtag = jtag_priv(jtag);
+ unsigned long apb_frq;
+ u32 tck_val;
+ u16 div;
+
+ apb_frq = clk_get_rate(aspeed_jtag->pclk);
+ div = (apb_frq % freq == 0) ? (apb_frq / freq) - 1 : (apb_frq / freq);
+ tck_val = aspeed_jtag_read(aspeed_jtag, ASPEED_JTAG_TCK);
+ aspeed_jtag_write(aspeed_jtag,
+ (tck_val & ASPEED_JTAG_TCK_DIVISOR_MASK) | div,
+ ASPEED_JTAG_TCK);
+ return 0;
+}
+
+static int aspeed_jtag_freq_get(struct jtag *jtag, u32 *frq)
+{
+ struct aspeed_jtag *aspeed_jtag = jtag_priv(jtag);
+ u32 pclk;
+ u32 tck;
+
+ pclk = clk_get_rate(aspeed_jtag->pclk);
+ tck = aspeed_jtag_read(aspeed_jtag, ASPEED_JTAG_TCK);
+ *frq = pclk / (ASPEED_JTAG_TCK_GET_DIV(tck) + 1);
+
+ return 0;
+}
+
+static void aspeed_jtag_sw_delay(struct aspeed_jtag *aspeed_jtag, int cnt)
+{
+ int i;
+
+ for (i = 0; i < cnt; i++)
+ aspeed_jtag_read(aspeed_jtag, ASPEED_JTAG_SW);
+}
+
+static char aspeed_jtag_tck_cycle(struct aspeed_jtag *aspeed_jtag,
+ u8 tms, u8 tdi)
+{
+ char tdo = 0;
+
+ /* TCK = 0 */
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ (tms * ASPEED_JTAG_SW_MODE_TMS) |
+ (tdi * ASPEED_JTAG_SW_MODE_TDIO), ASPEED_JTAG_SW);
+
+ aspeed_jtag_sw_delay(aspeed_jtag, ASPEED_JTAG_TCK_WAIT);
+
+ /* TCK = 1 */
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ ASPEED_JTAG_SW_MODE_TCK |
+ (tms * ASPEED_JTAG_SW_MODE_TMS) |
+ (tdi * ASPEED_JTAG_SW_MODE_TDIO), ASPEED_JTAG_SW);
+
+ if (aspeed_jtag_read(aspeed_jtag, ASPEED_JTAG_SW) &
+ ASPEED_JTAG_SW_MODE_TDIO)
+ tdo = 1;
+
+ aspeed_jtag_sw_delay(aspeed_jtag, ASPEED_JTAG_TCK_WAIT);
+
+ /* TCK = 0 */
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ (tms * ASPEED_JTAG_SW_MODE_TMS) |
+ (tdi * ASPEED_JTAG_SW_MODE_TDIO), ASPEED_JTAG_SW);
+ return tdo;
+}
+
+static void aspeed_jtag_wait_instruction_pause(struct aspeed_jtag *aspeed_jtag)
+{
+ wait_event_interruptible(aspeed_jtag->jtag_wq, aspeed_jtag->flag &
+ ASPEED_JTAG_ISR_INST_PAUSE);
+ aspeed_jtag->flag &= ~ASPEED_JTAG_ISR_INST_PAUSE;
+}
+
+static void
+aspeed_jtag_wait_instruction_complete(struct aspeed_jtag *aspeed_jtag)
+{
+ wait_event_interruptible(aspeed_jtag->jtag_wq, aspeed_jtag->flag &
+ ASPEED_JTAG_ISR_INST_COMPLETE);
+ aspeed_jtag->flag &= ~ASPEED_JTAG_ISR_INST_COMPLETE;
+}
+
+static void
+aspeed_jtag_wait_data_pause_complete(struct aspeed_jtag *aspeed_jtag)
+{
+ wait_event_interruptible(aspeed_jtag->jtag_wq, aspeed_jtag->flag &
+ ASPEED_JTAG_ISR_DATA_PAUSE);
+ aspeed_jtag->flag &= ~ASPEED_JTAG_ISR_DATA_PAUSE;
+}
+
+static void aspeed_jtag_wait_data_complete(struct aspeed_jtag *aspeed_jtag)
+{
+ wait_event_interruptible(aspeed_jtag->jtag_wq, aspeed_jtag->flag &
+ ASPEED_JTAG_ISR_DATA_COMPLETE);
+ aspeed_jtag->flag &= ~ASPEED_JTAG_ISR_DATA_COMPLETE;
+}
+
+static void aspeed_jtag_sm_cycle(struct aspeed_jtag *aspeed_jtag, const u8 *tms,
+ int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ aspeed_jtag_tck_cycle(aspeed_jtag, tms[i], 0);
+}
+
+static void aspeed_jtag_run_test_idle_sw(struct aspeed_jtag *aspeed_jtag,
+ struct jtag_run_test_idle *runtest)
+{
+ static const u8 sm_pause_irpause[] = {1, 1, 1, 1, 0, 1, 0};
+ static const u8 sm_pause_drpause[] = {1, 1, 1, 0, 1, 0};
+ static const u8 sm_idle_irpause[] = {1, 1, 0, 1, 0};
+ static const u8 sm_idle_drpause[] = {1, 0, 1, 0};
+ static const u8 sm_pause_idle[] = {1, 1, 0};
+ int i;
+
+ /* SW mode from idle/pause-> to pause/idle */
+ if (runtest->reset) {
+ for (i = 0; i < ASPEED_JTAG_RESET_CNTR; i++)
+ aspeed_jtag_tck_cycle(aspeed_jtag, 1, 0);
+ }
+
+ switch (aspeed_jtag->status) {
+ case JTAG_STATE_IDLE:
+ switch (runtest->endstate) {
+ case JTAG_STATE_PAUSEIR:
+ /* ->DRSCan->IRSCan->IRCap->IRExit1->PauseIR */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_idle_irpause,
+ sizeof(sm_idle_irpause));
+
+ aspeed_jtag->status = JTAG_STATE_PAUSEIR;
+ break;
+ case JTAG_STATE_PAUSEDR:
+ /* ->DRSCan->DRCap->DRExit1->PauseDR */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_idle_drpause,
+ sizeof(sm_idle_drpause));
+
+ aspeed_jtag->status = JTAG_STATE_PAUSEDR;
+ break;
+ case JTAG_STATE_IDLE:
+ /* IDLE */
+ aspeed_jtag_tck_cycle(aspeed_jtag, 0, 0);
+ aspeed_jtag->status = JTAG_STATE_IDLE;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case JTAG_STATE_PAUSEIR:
+ /* Fall-through */
+ case JTAG_STATE_PAUSEDR:
+ /* From IR/DR Pause */
+ switch (runtest->endstate) {
+ case JTAG_STATE_PAUSEIR:
+ /*
+ * to Exit2 IR/DR->Updt IR/DR->DRSCan->IRSCan->IRCap->
+ * IRExit1->PauseIR
+ */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_pause_irpause,
+ sizeof(sm_pause_irpause));
+
+ aspeed_jtag->status = JTAG_STATE_PAUSEIR;
+ break;
+ case JTAG_STATE_PAUSEDR:
+ /*
+ * to Exit2 IR/DR->Updt IR/DR->DRSCan->DRCap->
+ * DRExit1->PauseDR
+ */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_pause_drpause,
+ sizeof(sm_pause_drpause));
+ aspeed_jtag->status = JTAG_STATE_PAUSEDR;
+ break;
+ case JTAG_STATE_IDLE:
+ /* to Exit2 IR/DR->Updt IR/DR->IDLE */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_pause_idle,
+ sizeof(sm_pause_idle));
+ aspeed_jtag->status = JTAG_STATE_IDLE;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ default:
+ dev_err(aspeed_jtag->dev, "aspeed_jtag_run_test_idle error\n");
+ break;
+ }
+
+ /* Stay on IDLE for at least TCK cycle */
+ for (i = 0; i < runtest->tck; i++)
+ aspeed_jtag_tck_cycle(aspeed_jtag, 0, 0);
+}
+
+/**
+ * aspeed_jtag_run_test_idle:
+ * JTAG reset: generates at least 9 TMS high and 1 TMS low to force
+ * devices into Run-Test/Idle State.
+ */
+static int aspeed_jtag_idle(struct jtag *jtag,
+ struct jtag_run_test_idle *runtest)
+{
+ struct aspeed_jtag *aspeed_jtag = jtag_priv(jtag);
+
+ dev_dbg(aspeed_jtag->dev, "aspeed_jtag runtest, status:%d, mode:%s, state:%s, reset:%d, tck:%d\n",
+ aspeed_jtag->status, runtest->mode ? "SW" : "HW",
+ end_status_str[runtest->endstate], runtest->reset,
+ runtest->tck);
+
+ if (runtest->mode) {
+ aspeed_jtag_run_test_idle_sw(aspeed_jtag, runtest);
+ return 0;
+ }
+
+ /* Disable sw mode */
+ aspeed_jtag_write(aspeed_jtag, 0, ASPEED_JTAG_SW);
+ /* x TMS high + 1 TMS low */
+ if (runtest->reset)
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_CTL_ENG_EN |
+ ASPEED_JTAG_CTL_ENG_OUT_EN |
+ ASPEED_JTAG_CTL_FORCE_TMS, ASPEED_JTAG_CTRL);
+ else
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_EC_GO_IDLE,
+ ASPEED_JTAG_EC);
+
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ ASPEED_JTAG_SW_MODE_TDIO, ASPEED_JTAG_SW);
+
+ aspeed_jtag->status = JTAG_STATE_IDLE;
+ return 0;
+}
+
+static void aspeed_jtag_xfer_sw(struct aspeed_jtag *aspeed_jtag,
+ struct jtag_xfer *xfer, unsigned long *data)
+{
+ unsigned long remain_xfer = xfer->length;
+ unsigned long shift_bits = 0;
+ unsigned long index = 0;
+ unsigned long tdi;
+ char tdo;
+
+ if (xfer->direction == JTAG_READ_XFER)
+ tdi = UINT_MAX;
+ else
+ tdi = data[index];
+
+ while (remain_xfer > 1) {
+ tdo = aspeed_jtag_tck_cycle(aspeed_jtag, 0,
+ tdi & ASPEED_JTAG_DATA_MSB);
+ data[index] |= tdo << (shift_bits %
+ ASPEED_JTAG_DATA_CHUNK_SIZE);
+
+ tdi >>= 1;
+ shift_bits++;
+ remain_xfer--;
+
+ if (shift_bits % ASPEED_JTAG_DATA_CHUNK_SIZE == 0) {
+ dev_dbg(aspeed_jtag->dev, "R/W data[%lu]:%lx\n",
+ index, data[index]);
+
+ tdo = 0;
+ index++;
+
+ if (xfer->direction == JTAG_READ_XFER)
+ tdi = UINT_MAX;
+ else
+ tdi = data[index];
+ }
+ }
+
+ tdo = aspeed_jtag_tck_cycle(aspeed_jtag, 1, tdi & ASPEED_JTAG_DATA_MSB);
+ data[index] |= tdo << (shift_bits % ASPEED_JTAG_DATA_CHUNK_SIZE);
+}
+
+static void aspeed_jtag_xfer_push_data(struct aspeed_jtag *aspeed_jtag,
+ enum jtag_xfer_type type, u32 bits_len)
+{
+ dev_dbg(aspeed_jtag->dev, "shift bits %d\n", bits_len);
+
+ if (type == JTAG_SIR_XFER) {
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_IOUT_LEN(bits_len),
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_DOUT_LEN(bits_len) |
+ ASPEED_JTAG_CTL_INST_EN, ASPEED_JTAG_CTRL);
+ } else {
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_DOUT_LEN(bits_len),
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_DOUT_LEN(bits_len) |
+ ASPEED_JTAG_CTL_DATA_EN, ASPEED_JTAG_CTRL);
+ }
+}
+
+static void aspeed_jtag_xfer_push_data_last(struct aspeed_jtag *aspeed_jtag,
+ enum jtag_xfer_type type,
+ u32 shift_bits,
+ enum jtag_endstate endstate)
+{
+ if (endstate != JTAG_STATE_IDLE) {
+ if (type == JTAG_SIR_XFER) {
+ dev_dbg(aspeed_jtag->dev, "IR Keep Pause\n");
+
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_IOUT_LEN(shift_bits),
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_IOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_INST_EN,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_wait_instruction_pause(aspeed_jtag);
+ } else {
+ dev_dbg(aspeed_jtag->dev, "DR Keep Pause\n");
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_DOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_DR_UPDATE,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_DOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_DR_UPDATE |
+ ASPEED_JTAG_CTL_DATA_EN,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_wait_data_pause_complete(aspeed_jtag);
+ }
+ } else {
+ if (type == JTAG_SIR_XFER) {
+ dev_dbg(aspeed_jtag->dev, "IR go IDLE\n");
+
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_IOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_LASPEED_INST,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_IOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_LASPEED_INST |
+ ASPEED_JTAG_CTL_INST_EN,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_wait_instruction_complete(aspeed_jtag);
+ } else {
+ dev_dbg(aspeed_jtag->dev, "DR go IDLE\n");
+
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_DOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_LASPEED_DATA,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_DOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_LASPEED_DATA |
+ ASPEED_JTAG_CTL_DATA_EN,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_wait_data_complete(aspeed_jtag);
+ }
+ }
+}
+
+static void aspeed_jtag_xfer_hw(struct aspeed_jtag *aspeed_jtag,
+ struct jtag_xfer *xfer, unsigned long *data)
+{
+ unsigned long remain_xfer = xfer->length;
+ unsigned long index = 0;
+ char shift_bits;
+ u32 data_reg;
+
+ data_reg = xfer->type == JTAG_SIR_XFER ?
+ ASPEED_JTAG_INST : ASPEED_JTAG_DATA;
+ while (remain_xfer) {
+ if (xfer->direction == JTAG_WRITE_XFER) {
+ dev_dbg(aspeed_jtag->dev, "W dr->dr_data[%lu]:%lx\n",
+ index, data[index]);
+
+ aspeed_jtag_write(aspeed_jtag, data[index], data_reg);
+ } else {
+ aspeed_jtag_write(aspeed_jtag, 0, data_reg);
+ }
+
+ if (remain_xfer > ASPEED_JTAG_DATA_CHUNK_SIZE) {
+ shift_bits = ASPEED_JTAG_DATA_CHUNK_SIZE;
+
+ /*
+ * Read bytes were not equals to column length
+ * and go to Pause-DR
+ */
+ aspeed_jtag_xfer_push_data(aspeed_jtag, xfer->type,
+ shift_bits);
+ } else {
+ /*
+ * Read bytes equals to column length =>
+ * Update-DR
+ */
+ shift_bits = remain_xfer;
+ aspeed_jtag_xfer_push_data_last(aspeed_jtag, xfer->type,
+ shift_bits,
+ xfer->endstate);
+ }
+
+ if (xfer->direction == JTAG_READ_XFER) {
+ if (shift_bits < ASPEED_JTAG_DATA_CHUNK_SIZE) {
+ data[index] = aspeed_jtag_read(aspeed_jtag,
+ data_reg);
+
+ data[index] >>= ASPEED_JTAG_DATA_CHUNK_SIZE -
+ shift_bits;
+ } else {
+ data[index] = aspeed_jtag_read(aspeed_jtag,
+ data_reg);
+ }
+ dev_dbg(aspeed_jtag->dev, "R dr->dr_data[%lu]:%lx\n",
+ index, data[index]);
+ }
+
+ remain_xfer = remain_xfer - shift_bits;
+ index++;
+ dev_dbg(aspeed_jtag->dev, "remain_xfer %lu\n", remain_xfer);
+ }
+}
+
+static int aspeed_jtag_xfer(struct jtag *jtag, struct jtag_xfer *xfer,
+ u8 *xfer_data)
+{
+ static const u8 sm_update_shiftir[] = {1, 1, 0, 0};
+ static const u8 sm_update_shiftdr[] = {1, 0, 0};
+ static const u8 sm_pause_idle[] = {1, 1, 0};
+ static const u8 sm_pause_update[] = {1, 1};
+ struct aspeed_jtag *aspeed_jtag = jtag_priv(jtag);
+ unsigned long *data = (unsigned long *)xfer_data;
+ unsigned long remain_xfer = xfer->length;
+ unsigned long offset;
+ char dbg_str[256];
+ int pos = 0;
+ int i;
+
+ for (offset = 0, i = 0; offset < xfer->length;
+ offset += ASPEED_JTAG_DATA_CHUNK_SIZE, i++) {
+ pos += snprintf(&dbg_str[pos], sizeof(dbg_str) - pos,
+ "0x%08lx ", data[i]);
+ }
+
+ dev_dbg(aspeed_jtag->dev, "aspeed_jtag %s %s xfer, mode:%s, END:%d, len:%lu, TDI[%s]\n",
+ xfer->type == JTAG_SIR_XFER ? "SIR" : "SDR",
+ xfer->direction == JTAG_READ_XFER ? "READ" : "WRITE",
+ xfer->mode ? "SW" : "HW",
+ xfer->endstate, remain_xfer, dbg_str);
+
+ if (xfer->mode == JTAG_XFER_SW_MODE) {
+ /* SW mode */
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ ASPEED_JTAG_SW_MODE_TDIO, ASPEED_JTAG_SW);
+
+ if (aspeed_jtag->status != JTAG_STATE_IDLE) {
+ /*IR/DR Pause->Exit2 IR / DR->Update IR /DR */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_pause_update,
+ sizeof(sm_pause_update));
+ }
+
+ if (xfer->type == JTAG_SIR_XFER)
+ /* ->IRSCan->CapIR->ShiftIR */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_update_shiftir,
+ sizeof(sm_update_shiftir));
+ else
+ /* ->DRScan->DRCap->DRShift */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_update_shiftdr,
+ sizeof(sm_update_shiftdr));
+
+ aspeed_jtag_xfer_sw(aspeed_jtag, xfer, data);
+
+ /* DIPause/DRPause */
+ aspeed_jtag_tck_cycle(aspeed_jtag, 0, 0);
+
+ if (xfer->endstate == JTAG_STATE_IDLE) {
+ /* ->DRExit2->DRUpdate->IDLE */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_pause_idle,
+ sizeof(sm_pause_idle));
+ }
+ } else {
+ /* hw mode */
+ aspeed_jtag_write(aspeed_jtag, 0, ASPEED_JTAG_SW);
+ aspeed_jtag_xfer_hw(aspeed_jtag, xfer, data);
+ }
+
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ ASPEED_JTAG_SW_MODE_TDIO, ASPEED_JTAG_SW);
+ aspeed_jtag->status = xfer->endstate;
+ return 0;
+}
+
+static int aspeed_jtag_status_get(struct jtag *jtag, u32 *status)
+{
+ struct aspeed_jtag *aspeed_jtag = jtag_priv(jtag);
+
+ *status = aspeed_jtag->status;
+ return 0;
+}
+
+static irqreturn_t aspeed_jtag_interrupt(s32 this_irq, void *dev_id)
+{
+ struct aspeed_jtag *aspeed_jtag = dev_id;
+ irqreturn_t ret;
+ u32 status;
+
+ status = aspeed_jtag_read(aspeed_jtag, ASPEED_JTAG_ISR);
+ dev_dbg(aspeed_jtag->dev, "status %x\n", status);
+
+ if (status & ASPEED_JTAG_ISR_INT_MASK) {
+ aspeed_jtag_write(aspeed_jtag,
+ (status & ASPEED_JTAG_ISR_INT_MASK)
+ | (status & ASPEED_JTAG_ISR_INT_EN_MASK),
+ ASPEED_JTAG_ISR);
+ aspeed_jtag->flag |= status & ASPEED_JTAG_ISR_INT_MASK;
+ }
+
+ if (aspeed_jtag->flag) {
+ wake_up_interruptible(&aspeed_jtag->jtag_wq);
+ ret = IRQ_HANDLED;
+ } else {
+ dev_err(aspeed_jtag->dev, "aspeed_jtag irq status:%x\n",
+ status);
+ ret = IRQ_NONE;
+ }
+ return ret;
+}
+
+int aspeed_jtag_init(struct platform_device *pdev,
+ struct aspeed_jtag *aspeed_jtag)
+{
+ struct resource *res;
+ int err;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ aspeed_jtag->reg_base = devm_ioremap_resource(aspeed_jtag->dev, res);
+ if (IS_ERR(aspeed_jtag->reg_base))
+ return -ENOMEM;
+
+ aspeed_jtag->pclk = devm_clk_get(aspeed_jtag->dev, NULL);
+ if (IS_ERR(aspeed_jtag->pclk)) {
+ dev_err(aspeed_jtag->dev, "devm_clk_get failed\n");
+ return PTR_ERR(aspeed_jtag->pclk);
+ }
+
+ clk_prepare_enable(aspeed_jtag->pclk);
+
+ aspeed_jtag->irq = platform_get_irq(pdev, 0);
+ if (aspeed_jtag->irq < 0) {
+ dev_err(aspeed_jtag->dev, "no irq specified\n");
+ err = -ENOENT;
+ goto clk_unprep;
+ }
+
+ /* Enable clock */
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_CTL_ENG_EN |
+ ASPEED_JTAG_CTL_ENG_OUT_EN, ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ ASPEED_JTAG_SW_MODE_TDIO, ASPEED_JTAG_SW);
+
+ err = devm_request_irq(aspeed_jtag->dev, aspeed_jtag->irq,
+ aspeed_jtag_interrupt, 0,
+ "aspeed-jtag", aspeed_jtag);
+ if (err) {
+ dev_err(aspeed_jtag->dev, "aspeed_jtag unable to get IRQ");
+ goto clk_unprep;
+ }
+ dev_dbg(&pdev->dev, "aspeed_jtag:IRQ %d.\n", aspeed_jtag->irq);
+
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_ISR_INST_PAUSE |
+ ASPEED_JTAG_ISR_INST_COMPLETE |
+ ASPEED_JTAG_ISR_DATA_PAUSE |
+ ASPEED_JTAG_ISR_DATA_COMPLETE |
+ ASPEED_JTAG_ISR_INST_PAUSE_EN |
+ ASPEED_JTAG_ISR_INST_COMPLETE_EN |
+ ASPEED_JTAG_ISR_DATA_PAUSE_EN |
+ ASPEED_JTAG_ISR_DATA_COMPLETE_EN,
+ ASPEED_JTAG_ISR);
+
+ aspeed_jtag->flag = 0;
+ init_waitqueue_head(&aspeed_jtag->jtag_wq);
+ return 0;
+
+clk_unprep:
+ clk_disable_unprepare(aspeed_jtag->pclk);
+ return err;
+}
+
+int aspeed_jtag_deinit(struct platform_device *pdev,
+ struct aspeed_jtag *aspeed_jtag)
+{
+ aspeed_jtag_write(aspeed_jtag, 0, ASPEED_JTAG_ISR);
+ /* Disable clock */
+ aspeed_jtag_write(aspeed_jtag, 0, ASPEED_JTAG_CTRL);
+ clk_disable_unprepare(aspeed_jtag->pclk);
+ return 0;
+}
+
+static const struct jtag_ops aspeed_jtag_ops = {
+ .freq_get = aspeed_jtag_freq_get,
+ .freq_set = aspeed_jtag_freq_set,
+ .status_get = aspeed_jtag_status_get,
+ .idle = aspeed_jtag_idle,
+ .xfer = aspeed_jtag_xfer
+};
+
+static int aspeed_jtag_probe(struct platform_device *pdev)
+{
+ struct aspeed_jtag *aspeed_jtag;
+ struct jtag *jtag;
+ int err;
+
+ if (!of_device_is_compatible(pdev->dev.of_node, "aspeed,aspeed-jtag"))
+ return -ENOMEM;
+
+ jtag = jtag_alloc(sizeof(*aspeed_jtag), &aspeed_jtag_ops);
+ if (!jtag)
+ return -ENODEV;
+
+ platform_set_drvdata(pdev, jtag);
+ aspeed_jtag = jtag_priv(jtag);
+ aspeed_jtag->dev = &pdev->dev;
+
+ /* Initialize device*/
+ err = aspeed_jtag_init(pdev, aspeed_jtag);
+ if (err)
+ goto err_jtag_init;
+
+ /* Initialize JTAG core structure*/
+ err = jtag_register(jtag);
+ if (err)
+ goto err_jtag_register;
+
+ return 0;
+
+err_jtag_register:
+ aspeed_jtag_deinit(pdev, aspeed_jtag);
+err_jtag_init:
+ jtag_free(jtag);
+ return err;
+}
+
+static int aspeed_jtag_remove(struct platform_device *pdev)
+{
+ struct jtag *jtag;
+
+ jtag = platform_get_drvdata(pdev);
+ aspeed_jtag_deinit(pdev, jtag_priv(jtag));
+ jtag_unregister(jtag);
+ jtag_free(jtag);
+ return 0;
+}
+
+static const struct of_device_id aspeed_jtag_of_match[] = {
+ { .compatible = "aspeed,ast2400-jtag", },
+ { .compatible = "aspeed,ast2500-jtag", },
+ {}
+};
+
+static struct platform_driver aspeed_jtag_driver = {
+ .probe = aspeed_jtag_probe,
+ .remove = aspeed_jtag_remove,
+ .driver = {
+ .name = ASPEED_JTAG_NAME,
+ .of_match_table = aspeed_jtag_of_match,
+ },
+};
+module_platform_driver(aspeed_jtag_driver);
+
+MODULE_AUTHOR("Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>");
+MODULE_DESCRIPTION("ASPEED JTAG driver");
+MODULE_LICENSE("GPL v2");
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [patch v9 1/4] drivers: jtag: Add JTAG core driver
From: Oleksandr Shamray @ 2017-09-21 9:25 UTC (permalink / raw)
To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, arnd-r2nGTMty4D4
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, openbmc-uLR06cmDAlY/bJ5BZ2RsiQ,
joel-U3u1mxZcP9KHXe+LvDLADg, jiri-rHqAuBHg3fBzbRFIqnYvSA,
tklauser-93Khv+1bN0NyDzI6CaY1VQ,
linux-serial-u79uwXL29TY76Z2rM5mHXA, mec-WqBc5aa1uDFeoWH0uzbU5w,
vadimp-VPRAkNaXOzVWk0Htik3J/w,
system-sw-low-level-VPRAkNaXOzVWk0Htik3J/w,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
openocd-devel-owner-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
linux-api-u79uwXL29TY76Z2rM5mHXA, davem-fT/PcQaiUtIeIZ0/mPfg9Q,
mchehab-DgEjT+Ai2ygdnm+yROfE0A, Oleksandr Shamray, Jiri Pirko
In-Reply-To: <1505985932-27568-1-git-send-email-oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Initial patch for JTAG driver
JTAG class driver provide infrastructure to support hardware/software
JTAG platform drivers. It provide user layer API interface for flashing
and debugging external devices which equipped with JTAG interface
using standard transactions.
Driver exposes set of IOCTL to user space for:
- XFER:
- SIR (Scan Instruction Register, IEEE 1149.1 Data Register scan);
- SDR (Scan Data Register, IEEE 1149.1 Instruction Register scan);
- RUNTEST (Forces the IEEE 1149.1 bus to a run state for a specified
number of clocks).
- SIOCFREQ/GIOCFREQ for setting and reading JTAG frequency.
Driver core provides set of internal APIs for allocation and
registration:
- jtag_register;
- jtag_unregister;
- jtag_alloc;
- jtag_free;
Platform driver on registration with jtag-core creates the next
entry in dev folder:
/dev/jtagX
Signed-off-by: Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Signed-off-by: Jiri Pirko <jiri-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
---
V8->v9
Comments pointed by Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
- use get_user() instead of __get_user().
- change jtag->open type from int to atomic_t
- remove spinlock on jtg_open
- remove mutex on jtag_register
- add unregister_chrdev_region on jtag_init err
- add unregister_chrdev_region on jtag_exit
- remove unnecessary pointer casts
- add *data parameter to xfer function prototype
v7->v8
Comments pointed by Moritz Fischer <moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org>
- Fix misspelling s/friver/driver
v6->v7
Notifications from kbuild test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
- Remove include asm/types.h from jtag.h
- Add include <linux/types.h> to jtag.c
v5->v6
v4->v5
v3->v4
Comments pointed by Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
- change transaction pointer tdio type to __u64
- change internal status type from enum to __u32
- reorder jtag_xfer members to avoid the implied padding
- add __packed attribute to jtag_xfer and jtag_run_test_idle
v2->v3
Notifications from kbuild test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
- Change include path to <linux/types.h> in jtag.h
v1->v2
Comments pointed by Greg KH <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
- Change license type from GPLv2/BSD to GPLv2
- Change type of variables which crossed user/kernel to __type
- Remove "default n" from Kconfig
Comments pointed by Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
- Change list_add_tail in jtag_unregister to list_del
Comments pointed by Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
- Add SPDX-License-Identifier instead of license text
Comments pointed by Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
- Change __copy_to_user to memdup_user
- Change __put_user to put_user
- Change type of variables to __type for compatible 32 and 64-bit systems
- Add check for maximum xfer data size
- Change lookup data mechanism to get jtag data from inode
- Add .compat_ioctl to file ops
- Add mem alignment for jtag priv data
Comments pointed by Tobias Klauser <tklauser-93Khv+1bN0NyDzI6CaY1VQ@public.gmane.org>
- Change function names to avoid match with variable types
- Fix description for jtag_ru_test_idle in uapi jtag.h
- Fix misprints IDEL/IDLE, trough/through
---
Documentation/ioctl/ioctl-number.txt | 2 +
MAINTAINERS | 8 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/jtag/Kconfig | 16 ++
drivers/jtag/Makefile | 1 +
drivers/jtag/jtag.c | 298 ++++++++++++++++++++++++++++++++++
include/linux/jtag.h | 48 ++++++
include/uapi/linux/jtag.h | 115 +++++++++++++
9 files changed, 491 insertions(+), 0 deletions(-)
create mode 100644 drivers/jtag/Kconfig
create mode 100644 drivers/jtag/Makefile
create mode 100644 drivers/jtag/jtag.c
create mode 100644 include/linux/jtag.h
create mode 100644 include/uapi/linux/jtag.h
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 3e3fdae..1af2508 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -321,6 +321,8 @@ Code Seq#(hex) Include File Comments
0xB0 all RATIO devices in development:
<mailto:vgo-/IYFIZglx74@public.gmane.org>
0xB1 00-1F PPPoX <mailto:mostrows-TTukF6hB3AoKZpuMuFhwt/d9D2ou9A/h@public.gmane.org>
+0xB2 00-0f linux/jtag.h JTAG driver
+ <mailto:oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
0xB3 00 linux/mmc/ioctl.h
0xB4 00-0F linux/gpio.h <mailto:linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
0xB5 00-0F uapi/linux/rpmsg.h <mailto:linux-remoteproc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
diff --git a/MAINTAINERS b/MAINTAINERS
index 205d397..141aeaf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7292,6 +7292,14 @@ L: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
S: Maintained
F: drivers/tty/serial/jsm/
+JTAG SUBSYSTEM
+M: Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
+M: Vadim Pasternak <vadimp-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
+S: Maintained
+F: include/linux/jtag.h
+F: include/uapi/linux/jtag.h
+F: drivers/jtag/
+
K10TEMP HARDWARE MONITORING DRIVER
M: Clemens Ladisch <clemens-P6GI/4k7KOmELgA04lAiVw@public.gmane.org>
L: linux-hwmon-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 505c676..2214678 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -208,4 +208,6 @@ source "drivers/tee/Kconfig"
source "drivers/mux/Kconfig"
+source "drivers/jtag/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index dfdcda0..6a2059b 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -182,3 +182,4 @@ obj-$(CONFIG_FPGA) += fpga/
obj-$(CONFIG_FSI) += fsi/
obj-$(CONFIG_TEE) += tee/
obj-$(CONFIG_MULTIPLEXER) += mux/
+obj-$(CONFIG_JTAG) += jtag/
diff --git a/drivers/jtag/Kconfig b/drivers/jtag/Kconfig
new file mode 100644
index 0000000..0fad1a3
--- /dev/null
+++ b/drivers/jtag/Kconfig
@@ -0,0 +1,16 @@
+menuconfig JTAG
+ tristate "JTAG support"
+ ---help---
+ This provides basic core functionality support for jtag class devices
+ Hardware equipped with JTAG microcontroller which can be built
+ on top of this drivers. Driver exposes the set of IOCTL to the
+ user space for:
+ SIR (Scan Instruction Register, IEEE 1149.1 Data Register scan);
+ SDR (Scan Data Register, IEEE 1149.1 Instruction Register scan);
+ RUNTEST (Forces IEEE 1149.1 bus to a run state for specified
+ number of clocks).
+
+ If you want this support, you should say Y here.
+
+ To compile this driver as a module, choose M here: the module will
+ be called jtag.
diff --git a/drivers/jtag/Makefile b/drivers/jtag/Makefile
new file mode 100644
index 0000000..af37493
--- /dev/null
+++ b/drivers/jtag/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_JTAG) += jtag.o
diff --git a/drivers/jtag/jtag.c b/drivers/jtag/jtag.c
new file mode 100644
index 0000000..4fd327a
--- /dev/null
+++ b/drivers/jtag/jtag.c
@@ -0,0 +1,298 @@
+/*
+ * drivers/jtag/jtag.c
+ *
+ * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2017 Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/jtag.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/rtnetlink.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <uapi/linux/jtag.h>
+
+struct jtag {
+ struct device *dev;
+ struct cdev cdev;
+ int id;
+ atomic_t open;
+ const struct jtag_ops *ops;
+ unsigned long priv[0] __aligned(ARCH_DMA_MINALIGN);
+};
+
+static dev_t jtag_devt;
+static DEFINE_IDA(jtag_ida);
+
+void *jtag_priv(struct jtag *jtag)
+{
+ return jtag->priv;
+}
+EXPORT_SYMBOL_GPL(jtag_priv);
+
+static u8 *jtag_copy_from_user(__u64 udata, unsigned long bit_size)
+{
+ unsigned long size;
+ void *kdata;
+
+ size = DIV_ROUND_UP(bit_size, BITS_PER_BYTE);
+ kdata = memdup_user(u64_to_user_ptr(udata), size);
+
+ return kdata;
+}
+
+static unsigned long jtag_copy_to_user(__u64 udata, u8 *kdata,
+ unsigned long bit_size)
+{
+ unsigned long size;
+
+ size = DIV_ROUND_UP(bit_size, BITS_PER_BYTE);
+
+ return copy_to_user(u64_to_user_ptr(udata), (void *)(kdata), size);
+}
+
+static struct class jtag_class = {
+ .name = "jtag",
+ .owner = THIS_MODULE,
+};
+
+static int jtag_run_test_idle_op(struct jtag *jtag,
+ struct jtag_run_test_idle *idle)
+{
+ if (jtag->ops->idle)
+ return jtag->ops->idle(jtag, idle);
+ else
+ return -EOPNOTSUPP;
+}
+
+static int jtag_xfer_op(struct jtag *jtag, struct jtag_xfer *xfer, u8 *data)
+{
+ if (jtag->ops->xfer)
+ return jtag->ops->xfer(jtag, xfer, data);
+ else
+ return -EOPNOTSUPP;
+}
+
+static long jtag_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct jtag *jtag = file->private_data;
+ struct jtag_run_test_idle idle;
+ struct jtag_xfer xfer;
+ u8 *xfer_data;
+ u32 value;
+ int err;
+
+ switch (cmd) {
+ case JTAG_GIOCFREQ:
+ if (jtag->ops->freq_get)
+ err = jtag->ops->freq_get(jtag, &value);
+ else
+ err = -EOPNOTSUPP;
+ if (err)
+ break;
+
+ err = put_user(value, (__u32 *)arg);
+ break;
+
+ case JTAG_SIOCFREQ:
+ err = get_user(value, (__u32 *)arg);
+
+ if (value == 0)
+ err = -EINVAL;
+ if (err)
+ break;
+
+ if (jtag->ops->freq_set)
+ err = jtag->ops->freq_set(jtag, value);
+ else
+ err = -EOPNOTSUPP;
+ break;
+
+ case JTAG_IOCRUNTEST:
+ if (copy_from_user(&idle, (void *)arg,
+ sizeof(struct jtag_run_test_idle)))
+ return -ENOMEM;
+ err = jtag_run_test_idle_op(jtag, &idle);
+ break;
+
+ case JTAG_IOCXFER:
+ if (copy_from_user(&xfer, (void *)arg,
+ sizeof(struct jtag_xfer)))
+ return -EFAULT;
+
+ if (xfer.length >= JTAG_MAX_XFER_DATA_LEN)
+ return -EFAULT;
+
+ xfer_data = jtag_copy_from_user(xfer.tdio, xfer.length);
+ if (!xfer_data)
+ return -ENOMEM;
+
+ err = jtag_xfer_op(jtag, &xfer, xfer_data);
+ if (jtag_copy_to_user(xfer.tdio, xfer_data, xfer.length)) {
+ kfree(xfer_data);
+ return -EFAULT;
+ }
+
+ kfree(xfer_data);
+ if (copy_to_user((void *)arg, &xfer, sizeof(struct jtag_xfer)))
+ return -EFAULT;
+ break;
+
+ case JTAG_GIOCSTATUS:
+ if (jtag->ops->status_get)
+ err = jtag->ops->status_get(jtag, &value);
+ else
+ err = -EOPNOTSUPP;
+ if (err)
+ break;
+
+ err = put_user(value, (__u32 *)arg);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return err;
+}
+
+#ifdef CONFIG_COMPAT
+static long jtag_ioctl_compat(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ return jtag_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
+}
+#endif
+
+static int jtag_open(struct inode *inode, struct file *file)
+{
+ struct jtag *jtag = container_of(inode->i_cdev, struct jtag, cdev);
+
+ if (atomic_read(&jtag->open)) {
+ dev_info(NULL, "jtag already opened\n");
+ return -EBUSY;
+ }
+
+ atomic_inc(&jtag->open);
+ file->private_data = jtag;
+ return 0;
+}
+
+static int jtag_release(struct inode *inode, struct file *file)
+{
+ struct jtag *jtag = file->private_data;
+
+ atomic_dec(&jtag->open);
+ return 0;
+}
+
+static const struct file_operations jtag_fops = {
+ .owner = THIS_MODULE,
+ .open = jtag_open,
+ .release = jtag_release,
+ .llseek = noop_llseek,
+ .unlocked_ioctl = jtag_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = jtag_ioctl_compat,
+#endif
+};
+
+struct jtag *jtag_alloc(size_t priv_size, const struct jtag_ops *ops)
+{
+ struct jtag *jtag;
+
+ jtag = kzalloc(sizeof(*jtag) + round_up(priv_size, ARCH_DMA_MINALIGN),
+ GFP_KERNEL);
+ if (!jtag)
+ return NULL;
+
+ jtag->ops = ops;
+ return jtag;
+}
+EXPORT_SYMBOL_GPL(jtag_alloc);
+
+void jtag_free(struct jtag *jtag)
+{
+ kfree(jtag);
+}
+EXPORT_SYMBOL_GPL(jtag_free);
+
+int jtag_register(struct jtag *jtag)
+{
+ int id;
+ int err;
+
+ id = ida_simple_get(&jtag_ida, 0, 0, GFP_KERNEL);
+ if (id < 0)
+ return id;
+
+ jtag->id = id;
+ cdev_init(&jtag->cdev, &jtag_fops);
+ jtag->cdev.owner = THIS_MODULE;
+ err = cdev_add(&jtag->cdev, MKDEV(MAJOR(jtag_devt), jtag->id), 1);
+ if (err)
+ goto err_cdev;
+
+ /* Register this jtag device with the driver core */
+ jtag->dev = device_create(&jtag_class, NULL, MKDEV(MAJOR(jtag_devt),
+ jtag->id),
+ NULL, "jtag%d", jtag->id);
+ if (!jtag->dev)
+ goto err_device_create;
+
+ atomic_set(&jtag->open, 0);
+ dev_set_drvdata(jtag->dev, jtag);
+ return err;
+
+err_device_create:
+ cdev_del(&jtag->cdev);
+err_cdev:
+ ida_simple_remove(&jtag_ida, id);
+ return err;
+}
+EXPORT_SYMBOL_GPL(jtag_register);
+
+void jtag_unregister(struct jtag *jtag)
+{
+ struct device *dev = jtag->dev;
+
+ cdev_del(&jtag->cdev);
+ device_unregister(dev);
+ ida_simple_remove(&jtag_ida, jtag->id);
+}
+EXPORT_SYMBOL_GPL(jtag_unregister);
+
+static int __init jtag_init(void)
+{
+ int err;
+
+ err = alloc_chrdev_region(&jtag_devt, JTAG_FIRST_MINOR,
+ JTAG_MAX_DEVICES, "jtag");
+ if (err)
+ return err;
+
+ err = class_register(&jtag_class);
+ if (err)
+ unregister_chrdev_region(jtag_devt, JTAG_MAX_DEVICES);
+
+ return err;
+}
+
+static void __exit jtag_exit(void)
+{
+ class_unregister(&jtag_class);
+ unregister_chrdev_region(jtag_devt, JTAG_MAX_DEVICES);
+}
+
+module_init(jtag_init);
+module_exit(jtag_exit);
+
+MODULE_AUTHOR("Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>");
+MODULE_DESCRIPTION("Generic jtag support");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/jtag.h b/include/linux/jtag.h
new file mode 100644
index 0000000..c016fed
--- /dev/null
+++ b/include/linux/jtag.h
@@ -0,0 +1,48 @@
+/*
+ * drivers/jtag/jtag.c
+ *
+ * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2017 Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __JTAG_H
+#define __JTAG_H
+
+#include <uapi/linux/jtag.h>
+
+#ifndef ARCH_DMA_MINALIGN
+#define ARCH_DMA_MINALIGN 1
+#endif
+
+#define jtag_u64_to_ptr(arg) ((void *)(uintptr_t)arg)
+
+#define JTAG_MAX_XFER_DATA_LEN 65535
+
+struct jtag;
+/**
+ * struct jtag_ops - callbacks for jtag control functions:
+ *
+ * @freq_get: get frequency function. Filled by device driver
+ * @freq_set: set frequency function. Filled by device driver
+ * @status_get: set status function. Filled by device driver
+ * @idle: set JTAG to idle state function. Filled by device driver
+ * @xfer: send JTAG xfer function. Filled by device driver
+ */
+struct jtag_ops {
+ int (*freq_get)(struct jtag *jtag, u32 *freq);
+ int (*freq_set)(struct jtag *jtag, u32 freq);
+ int (*status_get)(struct jtag *jtag, u32 *state);
+ int (*idle)(struct jtag *jtag, struct jtag_run_test_idle *idle);
+ int (*xfer)(struct jtag *jtag, struct jtag_xfer *xfer);
+};
+
+void *jtag_priv(struct jtag *jtag);
+int jtag_register(struct jtag *jtag);
+void jtag_unregister(struct jtag *jtag);
+struct jtag *jtag_alloc(size_t priv_size, const struct jtag_ops *ops);
+void jtag_free(struct jtag *jtag);
+
+#endif /* __JTAG_H */
diff --git a/include/uapi/linux/jtag.h b/include/uapi/linux/jtag.h
new file mode 100644
index 0000000..180bf22
--- /dev/null
+++ b/include/uapi/linux/jtag.h
@@ -0,0 +1,115 @@
+/*
+ * JTAG class driver
+ *
+ * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2017 Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
+ *
+ * Released under the GPLv2/BSD.
+ * SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+ */
+
+#ifndef __UAPI_LINUX_JTAG_H
+#define __UAPI_LINUX_JTAG_H
+
+/**
+ * enum jtag_xfer_mode:
+ *
+ * @JTAG_XFER_HW_MODE: hardware mode transfer
+ * @JTAG_XFER_SW_MODE: software mode transfer
+ */
+enum jtag_xfer_mode {
+ JTAG_XFER_HW_MODE,
+ JTAG_XFER_SW_MODE,
+};
+
+/**
+ * enum jtag_endstate:
+ *
+ * @JTAG_STATE_IDLE: JTAG state machine IDLE state
+ * @JTAG_STATE_PAUSEIR: JTAG state machine PAUSE_IR state
+ * @JTAG_STATE_PAUSEDR: JTAG state machine PAUSE_DR state
+ */
+enum jtag_endstate {
+ JTAG_STATE_IDLE,
+ JTAG_STATE_PAUSEIR,
+ JTAG_STATE_PAUSEDR,
+};
+
+/**
+ * enum jtag_xfer_type:
+ *
+ * @JTAG_SIR_XFER: SIR transfer
+ * @JTAG_SDR_XFER: SDR transfer
+ */
+enum jtag_xfer_type {
+ JTAG_SIR_XFER,
+ JTAG_SDR_XFER,
+};
+
+/**
+ * enum jtag_xfer_direction:
+ *
+ * @JTAG_READ_XFER: read transfer
+ * @JTAG_WRITE_XFER: write transfer
+ */
+enum jtag_xfer_direction {
+ JTAG_READ_XFER,
+ JTAG_WRITE_XFER,
+};
+
+/**
+ * struct jtag_run_test_idle - forces JTAG state machine to
+ * RUN_TEST/IDLE state
+ *
+ * @mode: access mode
+ * @reset: 0 - run IDLE/PAUSE from current state
+ * 1 - go through TEST_LOGIC/RESET state before IDLE/PAUSE
+ * @end: completion flag
+ * @tck: clock counter
+ *
+ * Structure represents interface to JTAG device for jtag idle
+ * execution.
+ */
+struct jtag_run_test_idle {
+ __u8 mode;
+ __u8 reset;
+ __u8 endstate;
+ __u8 tck;
+};
+
+/**
+ * struct jtag_xfer - jtag xfer:
+ *
+ * @mode: access mode
+ * @type: transfer type
+ * @direction: xfer direction
+ * @length: xfer bits len
+ * @tdio : xfer data array
+ * @endir: xfer end state
+ *
+ * Structure represents interface to Aspeed JTAG device for jtag sdr xfer
+ * execution.
+ */
+struct jtag_xfer {
+ __u8 mode;
+ __u8 type;
+ __u8 direction;
+ __u8 endstate;
+ __u32 length;
+ __u64 tdio;
+};
+
+/* ioctl interface */
+#define __JTAG_IOCTL_MAGIC 0xb2
+
+#define JTAG_IOCRUNTEST _IOW(__JTAG_IOCTL_MAGIC, 0,\
+ struct jtag_run_test_idle)
+#define JTAG_SIOCFREQ _IOW(__JTAG_IOCTL_MAGIC, 1, unsigned int)
+#define JTAG_GIOCFREQ _IOR(__JTAG_IOCTL_MAGIC, 2, unsigned int)
+#define JTAG_IOCXFER _IOWR(__JTAG_IOCTL_MAGIC, 3, struct jtag_xfer)
+#define JTAG_GIOCSTATUS _IOWR(__JTAG_IOCTL_MAGIC, 4, enum jtag_endstate)
+
+#define JTAG_FIRST_MINOR 0
+#define JTAG_MAX_DEVICES 32
+
+#endif /* __UAPI_LINUX_JTAG_H */
--
1.7.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox