* Re: [PATCH 0/3] MIPS: AR7: assorted fixes
From: James Hogan @ 2017-11-08 22:03 UTC (permalink / raw)
To: Jonas Gorski
Cc: linux-mips, linux-serial, Ralf Baechle, Greg Kroah-Hartman,
Yoshihiro YUNOMAE, Florian Fainelli, Nicolas Schichan
In-Reply-To: <20171029152721.6770-1-jonas.gorski@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 540 bytes --]
On Sun, Oct 29, 2017 at 04:27:18PM +0100, Jonas Gorski wrote:
> This patchset fixes a few issues found in AR7 that accumulated in the
> past few years. One was fixed for ages in OpenWrt/LEDE and never made
> it upstream, the others weren't noticed until now.
>
> Jonas Gorski (2):
> MIPS: AR7: defer registration of GPIO
> MIPS: AR7: ensure the port type's FCR value is used
>
> Oswald Buddenhagen (1):
> MIPS: AR7: ensure that serial ports are properly set up
Thanks. Patches 1 + 2 applied for 4.14.
Cheers
James
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
* [PATCH] serial: 8250: convert to threaded IRQ
From: Denys Zagorui @ 2017-11-09 14:15 UTC (permalink / raw)
To: gregkh, jslaby, linux-serial, linux-kernel
Due using virtualization it is common to see
many "too much work for irq*" messages.
There are fixes proposed erlier:
- e7328ae1848966181a7ac47e8ae6cddbd2cf55f3 (serial:
8250, increase PASS_LIMIT)
- f4f653e9875e573860e783fecbebde284a8626f5 (serial:
8250, disable "too much work" messages
First one doesn't help now, last one was reverted
(12de375ec493ab1767d4a07dde823e63ae5edc21) in fact
it doesn't fix anything. So procesing interrupts in
kthread give us an opportunity to perform rescheduling
periodically.
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Denys Zagorui <dzagorui@cisco.com>
---
drivers/tty/serial/8250/8250_core.c | 23 ++++++++++++++++-------
drivers/tty/serial/8250/8250_port.c | 5 ++---
2 files changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index d29b512a7d9f..0c2f6352523a 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -58,7 +58,7 @@ static struct uart_driver serial8250_reg;
static unsigned int skip_txen_test; /* force skip of txen test at init time */
-#define PASS_LIMIT 512
+#define PASS_LIMIT 32
#include <asm/serial.h>
/*
@@ -135,10 +135,8 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
l = l->next;
if (l == i->head && pass_counter++ > PASS_LIMIT) {
- /* If we hit this, we're dead. */
- printk_ratelimited(KERN_ERR
- "serial8250: too much work for irq%d\n", irq);
- break;
+ cond_resched();
+ pass_counter = 0;
}
} while (l != end);
@@ -146,9 +144,20 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
pr_debug("%s(%d): end\n", __func__, irq);
+ enable_irq(i->irq);
+
return IRQ_RETVAL(handled);
}
+static irqreturn_t serial8250_hard_irq(int irq, void *dev_id)
+{
+ struct irq_info *i = dev_id;
+
+ disable_irq_nosync(i->irq);
+
+ return IRQ_WAKE_THREAD;
+}
+
/*
* To support ISA shared interrupts, we need to have one interrupt
* handler that ensures that the IRQ line has been deasserted
@@ -217,8 +226,8 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
i->head = &up->list;
spin_unlock_irq(&i->lock);
irq_flags |= up->port.irqflags;
- ret = request_irq(up->port.irq, serial8250_interrupt,
- irq_flags, up->port.name, i);
+ ret = request_threaded_irq(up->port.irq, serial8250_hard_irq,
+ serial8250_interrupt, irq_flags, up->port.name, i);
if (ret < 0)
serial_do_unlink(i, up);
}
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index f0cc04f62b67..6d2c7bd1f402 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1852,13 +1852,12 @@ static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
{
unsigned char status;
- unsigned long flags;
struct uart_8250_port *up = up_to_u8250p(port);
if (iir & UART_IIR_NO_INT)
return 0;
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock(&port->lock);
status = serial_port_in(port, UART_LSR);
@@ -1870,7 +1869,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
if ((!up->dma || up->dma->tx_err) && (status & UART_LSR_THRE))
serial8250_tx_chars(up);
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock(&port->lock);
return 1;
}
EXPORT_SYMBOL_GPL(serial8250_handle_irq);
--
2.11.0
^ permalink raw reply related
* [PATCH v12 1/5] serdev: Make .remove in struct serdev_device_driver optional
From: Andrey Smirnov @ 2017-11-09 16:05 UTC (permalink / raw)
To: linux-kernel
Cc: Andrey Smirnov, linux-serial, Rob Herring, cphealy, Guenter Roeck,
Lucas Stach, Nikita Yushchenko, Lee Jones, Greg Kroah-Hartman,
Pavel Machek, Andy Shevchenko, Johan Hovold, Sebastian Reichel
In-Reply-To: <20171109160556.17018-1-andrew.smirnov@gmail.com>
Using devres infrastructure it is possible to write a serdev driver
that doesn't have any code that needs to be called as a part of
.remove. Add code to make .remove optional.
Cc: linux-kernel@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: cphealy@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/tty/serdev/core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index c68fb3a8ea1c..f500f6a2ca88 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -252,8 +252,8 @@ static int serdev_drv_probe(struct device *dev)
static int serdev_drv_remove(struct device *dev)
{
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
-
- sdrv->remove(to_serdev_device(dev));
+ if (sdrv->remove)
+ sdrv->remove(to_serdev_device(dev));
return 0;
}
--
2.13.6
^ permalink raw reply related
* [PATCH v12 2/5] serdev: Introduce devm_serdev_device_open()
From: Andrey Smirnov @ 2017-11-09 16:05 UTC (permalink / raw)
To: linux-kernel
Cc: Andrey Smirnov, linux-serial, Rob Herring, cphealy, Guenter Roeck,
Lucas Stach, Nikita Yushchenko, Lee Jones, Greg Kroah-Hartman,
Pavel Machek, Andy Shevchenko, Johan Hovold, Sebastian Reichel
In-Reply-To: <20171109160556.17018-1-andrew.smirnov@gmail.com>
Add code implementing managed version of serdev_device_open() for
serdev device drivers that "open" the device during driver's lifecycle
only once (e.g. opened in .probe() and closed in .remove()).
Cc: linux-kernel@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: cphealy@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
Documentation/driver-model/devres.txt | 3 +++
drivers/tty/serdev/core.c | 27 +++++++++++++++++++++++++++
include/linux/serdev.h | 1 +
3 files changed, 31 insertions(+)
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 69f08c0f23a8..e9c6b5cfeec1 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -383,6 +383,9 @@ RESET
devm_reset_control_get()
devm_reset_controller_register()
+SERDEV
+ devm_serdev_device_open()
+
SLAVE DMA ENGINE
devm_acpi_dma_controller_register()
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index f500f6a2ca88..5074b6a7d533 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -116,6 +116,33 @@ void serdev_device_close(struct serdev_device *serdev)
}
EXPORT_SYMBOL_GPL(serdev_device_close);
+static void devm_serdev_device_release(struct device *dev, void *dr)
+{
+ serdev_device_close(*(struct serdev_device **)dr);
+}
+
+int devm_serdev_device_open(struct device *dev, struct serdev_device *serdev)
+{
+ struct serdev_device **dr;
+ int ret;
+
+ dr = devres_alloc(devm_serdev_device_release, sizeof(*dr), GFP_KERNEL);
+ if (!dr)
+ return -ENOMEM;
+
+ ret = serdev_device_open(serdev);
+ if (ret) {
+ devres_free(dr);
+ return ret;
+ }
+
+ *dr = serdev;
+ devres_add(dev, dr);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_serdev_device_open);
+
void serdev_device_write_wakeup(struct serdev_device *serdev)
{
complete(&serdev->write_comp);
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index e69402d4a8ae..9929063bd45d 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -193,6 +193,7 @@ static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl,
int serdev_device_open(struct serdev_device *);
void serdev_device_close(struct serdev_device *);
+int devm_serdev_device_open(struct device *, struct serdev_device *);
unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
void serdev_device_set_flow_control(struct serdev_device *, bool);
int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);
--
2.13.6
^ permalink raw reply related
* Re: [PATCH 2/5] dt-bindings: serial: Add common rs485 binding for RTS polarity
From: Rob Herring @ 2017-11-10 21:58 UTC (permalink / raw)
To: Lukas Wunner
Cc: Greg Kroah-Hartman, Jiri Slaby, Sascha Hauer, Uwe Kleine-Koenig,
Mark Jackson, Michal Oleszczyk,
linux-serial-u79uwXL29TY76Z2rM5mHXA, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <60d6ef2cf6c599d2d8717250fe52a0ccb1272be8.1510134353.git.lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
On Wed, Nov 08, 2017 at 11:32:34AM +0100, Lukas Wunner wrote:
> rs485 allows for robust half-duplex serial communication. It is often
> implemented by attaching an rs485 transceiver to a UART. The UART's
> RTS line is wired to the transceiver's Transmit Enable pin and
> determines whether the transceiver is sending or receiving.
>
> Examples for such transceivers are Maxim MAX13451E and TI SN65HVD1781A:
> https://datasheets.maximintegrated.com/en/ds/MAX13450E-MAX13451E.pdf
> http://www.ti.com/lit/ds/symlink/sn65hvd1781a-q1.pdf
>
> In the devicetree, the transceiver itself is not represented, only the
> UART is. A few rs485-specific dt-bindings already exist and these go
> into the UART's device node.
That often ends up being a mistake. We don't describe things, then add a
few properties and then finally realize we need a full representation.
Connectors are a good example.
> This commit adds a binding to set the RTS polarity. Most (if not all)
> transceivers require the Transmit Enable pin be driven high for sending,
> but in some cases boards may negate the pin and RTS must then be driven
> low. Consequently the polarity defaults to active high but can be
> inverted with the newly added "rs485-rts-active-low" binding.
>
> Document this binding in rs485.txt and in the two drivers fsl-imx-uart
> and fsl-lpuart that are about to be amended with support for it.
>
> Curiously, the omap_serial driver defaults to active low and already
> supports an "rs485-rts-active-high" binding to invert the polarity.
> This is left unchanged to retain compatibility, but the binding is
> herewith documented.
>
> Cc: Mark Jackson <mpfj-2FZW7xY0fHgqdlJmJB21zg@public.gmane.org>
> Cc: Michał Oleszczyk <oleszczyk.m-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> Cc: Uwe Kleine-König <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> Signed-off-by: Lukas Wunner <lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
> ---
> Documentation/devicetree/bindings/serial/fsl-imx-uart.txt | 3 ++-
> Documentation/devicetree/bindings/serial/fsl-lpuart.txt | 3 ++-
> Documentation/devicetree/bindings/serial/omap_serial.txt | 1 +
> Documentation/devicetree/bindings/serial/rs485.txt | 1 +
> 4 files changed, 6 insertions(+), 2 deletions(-)
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH] dt-bindings: serial: fsl-imx-uart: Remove 'fsl,irda-mode' property
From: Rob Herring @ 2017-11-10 21:59 UTC (permalink / raw)
To: Fabio Estevam
Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
linux-serial-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Fabio Estevam
In-Reply-To: <1510157005-5110-1-git-send-email-festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On Wed, Nov 08, 2017 at 02:03:25PM -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
>
> 'fsl,irda-mode' property has been removed since commit afe9cbb1a6ad
> ("serial: imx: drop support for IRDA"), so remove it from the binding
> document.
>
> Signed-off-by: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
> ---
> Documentation/devicetree/bindings/serial/fsl-imx-uart.txt | 1 -
> 1 file changed, 1 deletion(-)
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [serial] b5c545ac2f: WARNING:inconsistent_lock_state
From: kernel test robot @ 2017-11-12 19:14 UTC (permalink / raw)
To: Denys Zagorui; +Cc: gregkh, jslaby, linux-serial, linux-kernel, lkp
In-Reply-To: <20171109141506.2805-1-dzagorui@cisco.com>
[-- Attachment #1: Type: text/plain, Size: 7398 bytes --]
FYI, we noticed the following commit (built with gcc-6):
commit: b5c545ac2fe9cea8e5799955640f79db393c1198 ("serial: 8250: convert to threaded IRQ")
url: https://github.com/0day-ci/linux/commits/Denys-Zagorui/serial-8250-convert-to-threaded-IRQ/20171112-140607
base: https://git.kernel.org/cgit/linux/kernel/git/gregkh/tty.git tty-testing
in testcase: trinity
with following parameters:
runtime: 300s
test-description: Trinity is a linux system call fuzz tester.
test-url: http://codemonkey.org.uk/projects/trinity/
on test machine: qemu-system-x86_64 -enable-kvm -cpu kvm64,+ssse3 -m 1G
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
+-------------------------------------------------+------------+------------+
| | 9ce99a3a92 | b5c545ac2f |
+-------------------------------------------------+------------+------------+
| boot_successes | 4 | 0 |
| boot_failures | 1 | 8 |
| BUG:kernel_hang_in_test_stage | 1 | |
| WARNING:inconsistent_lock_state | 0 | 8 |
| inconsistent{IN-HARDIRQ-W}->{HARDIRQ-ON-W}usage | 0 | 3 |
| inconsistent{HARDIRQ-ON-W}->{IN-HARDIRQ-W}usage | 0 | 5 |
| RIP:__do_softirq | 0 | 1 |
| RIP:lock_acquire | 0 | 1 |
| calltrace:irq_exit | 0 | 3 |
| RIP:e1000_watchdog | 0 | 3 |
| RIP:_raw_spin_unlock_irq | 0 | 1 |
| RIP:__slab_alloc | 0 | 1 |
+-------------------------------------------------+------------+------------+
[ 400.767768] WARNING: inconsistent lock state
[ 400.767770] 4.14.0-rc4-00096-gb5c545ac2 #5 Not tainted
[ 400.767772] --------------------------------
[ 400.768030] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[ 400.768287] systemd-journal/2162 [HC1[1]:SC1[1]:HE0:SE0] takes:
[ 400.768289] (&port_lock_key){?.+.}, at: [<ffffffffa06d678b>] serial8250_console_write+0x91/0x1f4
[ 400.768318] {HARDIRQ-ON-W} state was registered at:
[ 400.768320] __lock_acquire+0x3a4/0x822
[ 400.768322] lock_acquire+0x142/0x1dd
[ 400.768323] _raw_spin_lock+0x34/0x6a
[ 400.768906] serial8250_handle_irq+0x25/0xbc
[ 400.768929] serial8250_default_handle_irq+0x28/0x3a
[ 400.768931] serial8250_interrupt+0x3e/0xa8
[ 400.768933] irq_thread_fn+0x1d/0x34
[ 400.768935] irq_thread+0xe6/0x19c
[ 400.768936] kthread+0x172/0x17a
[ 400.768938] ret_from_fork+0x2a/0x40
[ 400.768960] irq event stamp: 181597
[ 400.768963] hardirqs last enabled at (181596): [<ffffffffa0dc382d>] _raw_spin_unlock_irq+0x2c/0x3d
[ 400.768966] hardirqs last disabled at (181597): [<ffffffffa0dc5ab8>] apic_timer_interrupt+0x98/0xb0
[ 400.768969] softirqs last enabled at (181562): [<ffffffffa0dc7fd6>] __do_softirq+0x376/0x45f
[ 400.768971] softirqs last disabled at (181585): [<ffffffffa00a59e5>] irq_exit+0x5d/0xb4
[ 400.768993]
[ 400.768995] other info that might help us debug this:
[ 400.768997] Possible unsafe locking scenario:
[ 400.768998]
[ 400.769000] CPU0
[ 400.769001] ----
[ 400.769003] lock(&port_lock_key);
[ 400.769028] <Interrupt>
[ 400.769029] lock(&port_lock_key);
[ 400.769033]
[ 400.769035] *** DEADLOCK ***
[ 400.769036]
[ 400.769058] 2 locks held by systemd-journal/2162:
[ 400.769059] #0: (&p->lock){+.+.}, at: [<ffffffffa0231d06>] seq_read+0x3c/0x333
[ 400.769067] #1: (console_lock){+.+.}, at: [<ffffffffa00ff67c>] vprintk_emit+0x264/0x2c2
[ 400.769095]
[ 400.769096] stack backtrace:
[ 400.769099] CPU: 0 PID: 2162 Comm: systemd-journal Not tainted 4.14.0-rc4-00096-gb5c545ac2 #5
[ 400.769122] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[ 400.769124] Call Trace:
[ 400.769125] <IRQ>
[ 400.769127] dump_stack+0x86/0xc0
[ 400.769129] print_usage_bug+0x247/0x256
[ 400.769131] ? check_usage_backwards+0x106/0x106
[ 400.769133] mark_lock+0x345/0x504
[ 400.769155] __lock_acquire+0x343/0x822
[ 400.769157] lock_acquire+0x142/0x1dd
[ 400.769159] ? serial8250_console_write+0x91/0x1f4
[ 400.769161] _raw_spin_lock_irqsave+0x4d/0x88
[ 400.769163] ? serial8250_console_write+0x91/0x1f4
[ 400.769165] serial8250_console_write+0x91/0x1f4
[ 400.769187] ? console_unlock+0x1f7/0x4d6
[ 400.769189] univ8250_console_write+0x21/0x23
[ 400.769191] console_unlock+0x3fe/0x4d6
[ 400.769193] vprintk_emit+0x26d/0x2c2
[ 400.769195] vprintk_default+0x1d/0x1f
[ 400.769196] vprintk_func+0x57/0x59
[ 400.769198] printk+0x43/0x4b
[ 400.769221] hrtimer_interrupt+0x194/0x1a3
[ 400.769223] smp_apic_timer_interrupt+0x12f/0x2a9
[ 400.769225] apic_timer_interrupt+0x9d/0xb0
[ 400.769227] RIP: 0010:_raw_spin_unlock_irq+0x33/0x3d
[ 400.769229] RSP: 0018:ffff8a1a35003e70 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff10
[ 400.769255] RAX: ffff8a1a3df4c040 RBX: ffff8a1a351d2a00 RCX: ffff8a1a35003dd8
[ 400.769257] RDX: 0000000000000002 RSI: ffff8a1a3df4c928 RDI: ffff8a1a3df4c040
[ 400.769260] RBP: ffff8a1a35003e78 R08: 0000006d323b831d R09: 0000000000000000
[ 400.769262] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000ffffffff
[ 400.769285] R13: 00000000ffffffff R14: ffffffffa1405188 R15: 0000000000000001
[ 400.769287] run_timer_softirq+0x80/0x89
[ 400.769289] ? _raw_spin_unlock_irq+0x33/0x3d
[ 400.769291] run_timer_softirq+0x8f/0x98
[ 400.769293] __do_softirq+0x1d1/0x45f
[ 400.769294] irq_exit+0x5d/0xb4
[ 400.769317] smp_apic_timer_interrupt+0x1f0/0x2a9
[ 400.769319] apic_timer_interrupt+0x9d/0xb0
[ 400.769320] </IRQ>
[ 400.769322] RIP: 0010:__slab_alloc+0x73/0x84
[ 400.769324] RSP: 0018:ffffafd24044fd10 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff10
[ 400.769349] RAX: ffff8a1a3df4c040 RBX: 0000000000000282 RCX: ffffafd24044fcb8
[ 400.769352] RDX: ffffffffa0071b03 RSI: ffff8a1a3df4c928 RDI: 0000000000000282
[ 400.769354] RBP: ffffafd24044fd40 R08: 0000006d3168b9e5 R09: 0000000000000001
[ 400.769357] R10: ffffafd24044fd10 R11: ffff8a1a3df4c040 R12: ffff8a1a3be75698
[ 400.769359] R13: 00000000ffffffff R14: 0000000000000000 R15: ffff8a1a34c04300
[ 400.769381] ? save_stack_trace+0x1b/0x1d
[ 400.769383] ? kvmalloc_node+0x4d/0x73
[ 400.769385] __kmalloc_node+0xe9/0x35d
[ 400.769387] ? kvmalloc_node+0x4d/0x73
[ 400.769389] kvmalloc_node+0x4d/0x73
[ 400.769390] seq_buf_alloc+0x16/0x18
[ 400.769392] seq_read+0xc7/0x333
[ 400.769414] ? __seccomp_filter+0x3c/0x3d5
[ 400.769416] __vfs_read+0x26/0x10b
[ 400.769418] vfs_read+0xba/0x146
[ 400.769419] SyS_read+0x51/0x8e
[ 400.769421] do_syscall_64+0x69/0x15f
[ 400.769423] entry_SYSCALL64_slow_path+0x25/0x25
[ 400.769425] RIP: 0033:0x7ff8a51df060
[ 400.769447] RSP: 002b:00007ffc0cee8778 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 400.769452] RAX: ffffffffffffffda RBX: 000055f171bc3200 RCX: 00007ff8a51df060
To reproduce:
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
bin/lkp qemu -k <bzImage> job-script # job-script is attached in this email
Thanks,
lkp
[-- Attachment #2: config-4.14.0-rc4-00096-gb5c545ac2 --]
[-- Type: text/plain, Size: 119003 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.14.0-rc4 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_DEBUG=y
# CONFIG_SOCK_CGROUP_DATA is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_THIN_ARCHIVES=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
# CONFIG_REFCOUNT_FULL is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
# CONFIG_X86_X2APIC is not set
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_AMD is not set
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_5LEVEL is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=y
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_ZONE_DEVICE=y
# CONFIG_ZONE_DEVICE is not set
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
# CONFIG_KEXEC_VERIFY_SIG is not set
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=y
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT is not set
#
# PCI host controller drivers
#
# CONFIG_VMD is not set
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_NET_INGRESS=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_SOCKET_IPV4 is not set
CONFIG_NF_DUP_IPV4=y
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=y
# CONFIG_NF_NAT_IPV4 is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
# CONFIG_IP_NF_MATCH_RPFILTER is not set
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_NF_SOCKET_IPV6 is not set
CONFIG_NF_DUP_IPV6=y
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
# CONFIG_BRIDGE_EBT_IP6 is not set
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=128
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set
#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set
#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
# CONFIG_CXL_LIB is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_MVSAS_TASKLET is not set
# CONFIG_SCSI_MVUMI is not set
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=y
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_ISCI=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=y
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
# CONFIG_AMD_XGBE_HAVE_ECC is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=y
CONFIG_IXGB=y
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_JME=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
CONFIG_SIS190=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
CONFIG_VIA_VELOCITY=y
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
# CONFIG_LED_TRIGGER_PHY is not set
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BROADCOM_PHY=y
CONFIG_CICADA_PHY=y
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_LXT_PHY=y
CONFIG_MARVELL_PHY=y
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
CONFIG_QSEMI_PHY=y
# CONFIG_REALTEK_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
CONFIG_SMSC_PHY=y
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
CONFIG_USB_NET_INT51X1=y
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
CONFIG_KEYBOARD_XTKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_KVM=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
# CONFIG_WATCHDOG_SYSFS is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
# CONFIG_IE6XX_WDT is not set
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
# CONFIG_LPC_SCH is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS68470 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
# CONFIG_LIRC is not set
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_XMP_DECODER=y
# CONFIG_RC_DEVICES is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set
#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set
# CONFIG_DRM_I915_SELFTEST is not set
# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
# CONFIG_DRM_LIB_RANDOM is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=1024
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
# CONFIG_SND_SEQ_MIDI is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_X86=y
# CONFIG_HDMI_LPE_AUDIO is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=y
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
#
# USB Power Delivery and Type-C drivers
#
# CONFIG_TYPEC_UCSI is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_INTEL_IDMA64 is not set
CONFIG_INTEL_IOATDMA=y
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_HSU_DMA=y
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_DCA=y
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_HYPERV_TSCPAGE is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=y
# CONFIG_ACERHDF is not set
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_DELL_SMBIOS=y
# CONFIG_DELL_LAPTOP is not set
CONFIG_DELL_WMI=y
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_DELL_WMI_LED is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=y
# CONFIG_PANASONIC_LAPTOP is not set
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ASUS_WMI is not set
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=y
CONFIG_WMI_BMOF=y
# CONFIG_MSI_WMI is not set
# CONFIG_PEAQ_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_CHT_INT33FE is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_MXM_WMI is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_MLX_CPLD_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# CONFIG_AMD_IOMMU is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
#
# Broadcom SoC drivers
#
#
# i.MX SoC drivers
#
#
# Qualcomm SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_THUNDERBOLT is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
CONFIG_NVMEM=y
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set
#
# FSI support
#
# CONFIG_FSI is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not set
CONFIG_EFI_ESRT=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_EFI_DEV_PATH_PARSER is not set
#
# Tegra firmware driver
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_ACL is not set
CONFIG_CIFS_DEBUG=y
CONFIG_CIFS_DEBUG2=y
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SMB311 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_INFO_SPLIT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VM_PGFLAGS is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_LOCKDEP_CROSSRELEASE=y
CONFIG_LOCKDEP_COMPLETIONS=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_FUTEX is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_HIST_TRIGGERS is not set
CONFIG_MMIOTRACE_TEST=m
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
#
# Runtime Testing
#
CONFIG_LKDTM=y
CONFIG_TEST_LIST_SORT=y
# CONFIG_TEST_SORT is not set
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
CONFIG_MEMTEST=y
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_DEBUG_VIRTUAL is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_ENTRY is not set
CONFIG_DEBUG_NMI_SELFTEST=y
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_FRAME_POINTER_UNWINDER=y
# CONFIG_ORC_UNWINDER is not set
# CONFIG_GUESS_UNWINDER is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=m
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
#
# Certificates for signature checking
#
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_VHOST_NET=y
CONFIG_VHOST=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 3967 bytes --]
#!/bin/sh
export_top_env()
{
export suite='trinity'
export testcase='trinity'
export runtime=300
export job_origin='/lkp/lkp/src/allot/rand/vm-lkp-wsx03-1G/trinity.yaml'
export testbox='vm-lkp-wsx03-1G-23'
export tbox_group='vm-lkp-wsx03-1G'
export kconfig='x86_64-nfsroot'
export compiler='gcc-6'
export queue='bisect'
export branch='linux-devel/devel-spot-201711121640'
export commit='b5c545ac2fe9cea8e5799955640f79db393c1198'
export submit_id='5a087e390b9a9364531906b5'
export job_file='/lkp/scheduled/vm-lkp-wsx03-1G-23/trinity-300s-debian-x86_64-2016-08-31.cgz-b5c545ac2fe9cea8e5799955640f79db393c1198-20171113-25683-8ajvr8-0.yaml'
export id='88d5a8874dac642ddb742df40de9d281cd100830'
export model='qemu-system-x86_64 -enable-kvm -cpu kvm64,+ssse3'
export nr_vm=30
export nr_cpu=1
export memory='1G'
export hdd_partitions='/dev/vda'
export swap_partitions='/dev/vdb'
export ssh_base_port=23600
export need_kconfig='CONFIG_KVM_GUEST=y'
export rootfs='debian-x86_64-2016-08-31.cgz'
export enqueue_time='2017-11-13 01:00:43 +0800'
export _id='5a087e390b9a9364531906b5'
export _rt='/result/trinity/300s/vm-lkp-wsx03-1G/debian-x86_64-2016-08-31.cgz/x86_64-nfsroot/gcc-6/b5c545ac2fe9cea8e5799955640f79db393c1198'
export user='lkp'
export result_root='/result/trinity/300s/vm-lkp-wsx03-1G/debian-x86_64-2016-08-31.cgz/x86_64-nfsroot/gcc-6/b5c545ac2fe9cea8e5799955640f79db393c1198/0'
export LKP_SERVER='inn'
export max_uptime=1500
export initrd='/osimage/debian/debian-x86_64-2016-08-31.cgz'
export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/vm-lkp-wsx03-1G-23/trinity-300s-debian-x86_64-2016-08-31.cgz-b5c545ac2fe9cea8e5799955640f79db393c1198-20171113-25683-8ajvr8-0.yaml
ARCH=x86_64
kconfig=x86_64-nfsroot
branch=linux-devel/devel-spot-201711121640
commit=b5c545ac2fe9cea8e5799955640f79db393c1198
BOOT_IMAGE=/pkg/linux/x86_64-nfsroot/gcc-6/b5c545ac2fe9cea8e5799955640f79db393c1198/vmlinuz-4.14.0-rc4-00096-gb5c545ac2
max_uptime=1500
RESULT_ROOT=/result/trinity/300s/vm-lkp-wsx03-1G/debian-x86_64-2016-08-31.cgz/x86_64-nfsroot/gcc-6/b5c545ac2fe9cea8e5799955640f79db393c1198/0
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
export modules_initrd='/pkg/linux/x86_64-nfsroot/gcc-6/b5c545ac2fe9cea8e5799955640f79db393c1198/modules.cgz'
export bm_initrd='/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-08-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/trinity-x86_64-6ddabfd2_2017-11-10.cgz'
export lkp_initrd='/lkp/lkp/lkp-x86_64.cgz'
export site='inn'
export LKP_CGI_PORT=80
export LKP_CIFS_PORT=139
export kernel='/pkg/linux/x86_64-nfsroot/gcc-6/b5c545ac2fe9cea8e5799955640f79db393c1198/vmlinuz-4.14.0-rc4-00096-gb5c545ac2'
export dequeue_time='2017-11-13 01:06:37 +0800'
export job_initrd='/lkp/scheduled/vm-lkp-wsx03-1G-23/trinity-300s-debian-x86_64-2016-08-31.cgz-b5c545ac2fe9cea8e5799955640f79db393c1198-20171113-25683-8ajvr8-0.cgz'
[ -n "$LKP_SRC" ] ||
export LKP_SRC=/lkp/${user:-lkp}/src
}
run_job()
{
echo $$ > $TMP/run-job.pid
. $LKP_SRC/lib/http.sh
. $LKP_SRC/lib/job.sh
. $LKP_SRC/lib/env.sh
export_top_env
run_monitor $LKP_SRC/monitors/wrapper kmsg
run_monitor $LKP_SRC/monitors/wrapper oom-killer
run_monitor $LKP_SRC/monitors/plain/watchdog
run_test $LKP_SRC/tests/wrapper trinity
}
extract_stats()
{
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper time trinity.time
$LKP_SRC/stats/wrapper time
$LKP_SRC/stats/wrapper dmesg
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper stderr
$LKP_SRC/stats/wrapper last_state
}
"$@"
[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 20684 bytes --]
[-- Attachment #5: trinity --]
[-- Type: text/plain, Size: 9640 bytes --]
Seeding trinity based on x86_64-nfsroot
2017-11-13 01:15:57 chroot --userspec nobody:nogroup / trinity -q -q -l off -s 3787546799 -x get_robust_list -x remap_file_pages -N 999999999
Trinity 1.8 Dave Jones <davej@codemonkey.org.uk>
shm:0x7fab0653f000-0x7fab1313bd00 (4 pages)
[main] Marking syscall get_robust_list (64bit:274 32bit:312) as to be disabled.
[main] Marking syscall remap_file_pages (64bit:216 32bit:257) as to be disabled.
[main] Couldn't chmod tmp/ to 0777.
[main] Using user passed random seed: 3787546799.
Marking all syscalls as enabled.
[main] Disabling syscalls marked as disabled by command line options
[main] Marked 64-bit syscall remap_file_pages (216) as deactivated.
[main] Marked 64-bit syscall get_robust_list (274) as deactivated.
[main] Marked 32-bit syscall remap_file_pages (257) as deactivated.
[main] Marked 32-bit syscall get_robust_list (312) as deactivated.
[main] 32-bit syscalls: 382 enabled, 2 disabled. 64-bit syscalls: 331 enabled, 2 disabled.
[main] Using pid_max = 32768
[main] futex: 0 owner:0
[main] futex: 0 owner:0
[main] futex: 0 owner:0
[main] futex: 0 owner:0
[main] futex: 0 owner:0
[main] Reserved/initialized 5 futexes.
[main] sysv_shm: id:0 size:8192 flags:7b0 ptr:(nil)
[main] sysv_shm: id:32769 size:4096 flags:17b0 ptr:(nil)
[main] Added 23 filenames from /dev
[main] Added 19738 filenames from /proc
[main] Added 15606 filenames from /sys
01 00 00 00 70 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 22 f3 7b 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
05 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 00 00 00 00 00 00 00 6a c7 ba 00 00 00 00 00 00 00 00 00 03 00 00 00 00 10 1f 04 ab 7f 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 00 48 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 72 4c 88 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 00 70 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 60 63 fa 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 00 50 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 b9 96 a0 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 00 48 00 00 00 07 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f5 54 b2 00 00 00 00 00 00 02 00 00 00 80 00 00 00 10 5f 04 ab 7f 00 00 04 00 00 00 00 00 00 00 0c 80 05 00 48 38 40 00 85 cd b1 5d 26 00 00 00 67 73 b9 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 00 40 00 00 00 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 62 0f 28 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0e 00 00 00 00 00 00 00 bb fc 6a 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 78 40 77 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 00 60 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 81 55 02 00 00 00 00 00 09 00 00 00 00 00 00 00 30 e1 42 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 da 48 01 00 00 00 00 00 07 00 00 00 00 00 00 00 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0 00 00 00 00 10 00 00
Can't do protocol ASH
Can't do protocol ASH
Can't do protocol ASH
Can't do protocol ASH
Can't do protocol ASH
Can't do protocol ASH
Can't do protocol ASH
Can't do protocol ASH
Can't do protocol ASH
Can't do protocol ASH
Can't do protocol BRIDGE
Can't do protocol BRIDGE
Can't do protocol BRIDGE
Can't do protocol BRIDGE
Can't do protocol BRIDGE
Can't do protocol BRIDGE
Can't do protocol BRIDGE
Can't do protocol BRIDGE
Can't do protocol BRIDGE
Can't do protocol BRIDGE
[main] Couldn't open socket (21:5:0). Address family not supported by protocol
[main] Couldn't open socket (21:5:0). Address family not supported by protocol
[main] Couldn't open socket (21:5:0). Address family not supported by protocol
[main] Couldn't open socket (21:5:0). Address family not supported by protocol
[main] Couldn't open socket (21:5:0). Address family not supported by protocol
[main] Couldn't open socket (21:5:0). Address family not supported by protocol
[main] Couldn't open socket (21:5:0). Address family not supported by protocol
[main] Couldn't open socket (21:5:0). Address family not supported by protocol
[main] Couldn't open socket (21:5:0). Address family not supported by protocol
[main] Couldn't open socket (21:5:0). Address family not supported by protocol
Can't do protocol KEY
Can't do protocol KEY
Can't do protocol KEY
Can't do protocol KEY
Can't do protocol KEY
Can't do protocol KEY
Can't do protocol KEY
Can't do protocol KEY
Can't do protocol KEY
Can't do protocol KEY
[main] Couldn't open socket (33:2:2). Address family not supported by protocol
[main] Couldn't open socket (33:2:2). Address family not supported by protocol
[main] Couldn't open socket (33:2:2). Address family not supported by protocol
[main] Couldn't open socket (33:2:2). Address family not supported by protocol
[main] Couldn't open socket (33:2:2). Address family not supported by protocol
[main] Couldn't open socket (33:2:2). Address family not supported by protocol
[main] Couldn't open socket (33:2:2). Address family not supported by protocol
[main] Couldn't open socket (33:2:2). Address family not supported by protocol
[main] Couldn't open socket (33:2:2). Address family not supported by protocol
[main] Couldn't open socket (33:2:2). Address family not supported by protocol
[main] Couldn't open socket (20:2:0). Address family not supported by protocol
[main] Couldn't open socket (20:2:0). Address family not supported by protocol
[main] Couldn't open socket (20:2:0). Address family not supported by protocol
[main] Couldn't open socket (20:2:0). Address family not supported by protocol
[main] Couldn't open socket (20:2:0). Address family not supported by protocol
[main] Couldn't open socket (20:2:0). Address family not supported by protocol
[main] Couldn't open socket (20:2:0). Address family not supported by protocol
[main] Couldn't open socket (20:2:0). Address family not supported by protocol
[main] Couldn't open socket (20:2:0). Address family not supported by protocol
[main] Couldn't open socket (20:2:0). Address family not supported by protocol
[main] Couldn't open socket (12:1:2). Address family not supported by protocol
[main] Couldn't open socket (12:5:2). Address family not supported by protocol
[main] Couldn't open socket (12:5:2). Address family not supported by protocol
[main] Couldn't open socket (12:1:2). Address family not supported by protocol
[main] Couldn't open socket (12:5:2). Address family not supported by protocol
[main] Couldn't open socket (12:1:2). Address family not supported by protocol
[main] Couldn't open socket (12:5:2). Address family not supported by protocol
[main] Couldn't open socket (12:1:2). Address family not supported by protocol
[main] Couldn't open socket (12:5:2). Address family not supported by protocol
[main] Couldn't open socket (12:1:2). Address family not supported by protocol
[main] Couldn't open socket (41:10:0). Address family not supported by protocol
[main] Couldn't open socket (41:2:0). Address family not supported by protocol
[main] Couldn't open socket (41:10:0). Address family not supported by protocol
[main] Couldn't open socket (41:2:0). Address family not supported by protocol
[main] Couldn't open socket (41:2:0). Address family not supported by protocol
[main] Couldn't open socket (41:10:0). Address family not supported by protocol
[main] Couldn't open socket (41:2:0). Address family not supported by protocol
[main] Couldn't open socket (41:2:0). Address family not supported by protocol
[main] Couldn't open socket (41:10:0). Address family not supported by protocol
[main] Couldn't open socket (41:10:0). Address family not supported by protocol
[main] Couldn't open socket (16:2:7). Protocol not supported
[main] Couldn't open socket (16:2:21). Protocol not supported
[main] Enabled 14/14 fd providers. initialized:14.
[main] Error opening tracing_on : Permission denied
^ permalink raw reply
* [PATCH] serial: 8250_pci: Add Amazon PCI serial device ID
From: Matt Wilson @ 2017-11-12 22:14 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Jiri Slaby, linux-serial, linux-kernel, Anthony Liguori,
Matt Wilson, stable
From: Matt Wilson <msw@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matt Wilson <msw@amazon.com>
---
drivers/tty/serial/8250/8250_pci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 0c101a7..d4e7be8 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5137,6 +5137,9 @@ static const struct pci_device_id serial_pci_tbl[] = {
{ PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 },
{ PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 },
+ /* Amazon PCI serial device */
+ { PCI_DEVICE(0x1d0f, 0x8250), .driver_data = pbn_b0_1_115200 },
+
/*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
--
2.7.4
^ permalink raw reply related
* Re: [PATCH] serial: 8250_pci: Add Amazon PCI serial device ID
From: Greg Kroah-Hartman @ 2017-11-13 8:31 UTC (permalink / raw)
To: Matt Wilson
Cc: Jiri Slaby, linux-serial, linux-kernel, Anthony Liguori,
Matt Wilson, stable
In-Reply-To: <1510524846-18979-1-git-send-email-msw@linux.com>
On Sun, Nov 12, 2017 at 02:14:06PM -0800, Matt Wilson wrote:
> From: Matt Wilson <msw@amazon.com>
>
> Cc: stable@vger.kernel.org
> Signed-off-by: Matt Wilson <msw@amazon.com>
> ---
I can't take patches without any changelog text at all :(
Please resend with a bit more descriptions of what this hardware is, and
why we need a table entry for it.
thanks,
greg k-h
^ permalink raw reply
* [PATCH 3.18 25/28] MIPS: AR7: Ensure that serial ports are properly set up
From: Greg Kroah-Hartman @ 2017-11-13 12:55 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oswald Buddenhagen, Jonas Gorski,
Florian Fainelli, Ralf Baechle, Yoshihiro YUNOMAE,
Nicolas Schichan, linux-mips, linux-serial, James Hogan
In-Reply-To: <20171113125400.803506921@linuxfoundation.org>
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream.
Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
never copied, resulting in a dead port.
Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type")
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[jonas.gorski: add Fixes tag]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17543/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/ar7/platform.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -581,6 +581,7 @@ static int __init ar7_register_uarts(voi
uart_port.type = PORT_AR7;
uart_port.uartclk = clk_get_rate(bus_clk) / 2;
uart_port.iotype = UPIO_MEM32;
+ uart_port.flags = UPF_FIXED_TYPE;
uart_port.regshift = 2;
uart_port.line = 0;
^ permalink raw reply
* [PATCH 4.4 48/56] MIPS: AR7: Defer registration of GPIO
From: Greg Kroah-Hartman @ 2017-11-13 12:56 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonas Gorski, Florian Fainelli,
Ralf Baechle, Yoshihiro YUNOMAE, Nicolas Schichan, linux-mips,
linux-serial, James Hogan
In-Reply-To: <20171113125557.613444087@linuxfoundation.org>
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonas Gorski <jonas.gorski@gmail.com>
commit e6b03ab63b4d270e0249f96536fde632409dc1dc upstream.
When called from prom init code, ar7_gpio_init() will fail as it will
call gpiochip_add() which relies on a working kmalloc() to alloc
the gpio_desc array and kmalloc is not useable yet at prom init time.
Move ar7_gpio_init() to ar7_register_devices() (a device_initcall)
where kmalloc works.
Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17542/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/ar7/platform.c | 4 ++++
arch/mips/ar7/prom.c | 2 --
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -654,6 +654,10 @@ static int __init ar7_register_devices(v
u32 val;
int res;
+ res = ar7_gpio_init();
+ if (res)
+ pr_warn("unable to register gpios: %d\n", res);
+
res = ar7_register_uarts();
if (res)
pr_err("unable to setup uart(s): %d\n", res);
--- a/arch/mips/ar7/prom.c
+++ b/arch/mips/ar7/prom.c
@@ -246,8 +246,6 @@ void __init prom_init(void)
ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
ar7_init_env((struct env_var *)fw_arg2);
console_config();
-
- ar7_gpio_init();
}
#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
^ permalink raw reply
* [PATCH 4.4 49/56] MIPS: AR7: Ensure that serial ports are properly set up
From: Greg Kroah-Hartman @ 2017-11-13 12:56 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oswald Buddenhagen, Jonas Gorski,
Florian Fainelli, Ralf Baechle, Yoshihiro YUNOMAE,
Nicolas Schichan, linux-mips, linux-serial, James Hogan
In-Reply-To: <20171113125557.613444087@linuxfoundation.org>
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream.
Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
never copied, resulting in a dead port.
Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type")
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[jonas.gorski: add Fixes tag]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17543/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/ar7/platform.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -576,6 +576,7 @@ static int __init ar7_register_uarts(voi
uart_port.type = PORT_AR7;
uart_port.uartclk = clk_get_rate(bus_clk) / 2;
uart_port.iotype = UPIO_MEM32;
+ uart_port.flags = UPF_FIXED_TYPE;
uart_port.regshift = 2;
uart_port.line = 0;
^ permalink raw reply
* [PATCH 4.9 74/87] MIPS: AR7: Defer registration of GPIO
From: Greg Kroah-Hartman @ 2017-11-13 12:56 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonas Gorski, Florian Fainelli,
Ralf Baechle, Yoshihiro YUNOMAE, Nicolas Schichan, linux-mips,
linux-serial, James Hogan
In-Reply-To: <20171113125615.304035578@linuxfoundation.org>
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonas Gorski <jonas.gorski@gmail.com>
commit e6b03ab63b4d270e0249f96536fde632409dc1dc upstream.
When called from prom init code, ar7_gpio_init() will fail as it will
call gpiochip_add() which relies on a working kmalloc() to alloc
the gpio_desc array and kmalloc is not useable yet at prom init time.
Move ar7_gpio_init() to ar7_register_devices() (a device_initcall)
where kmalloc works.
Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17542/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/ar7/platform.c | 4 ++++
arch/mips/ar7/prom.c | 2 --
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -654,6 +654,10 @@ static int __init ar7_register_devices(v
u32 val;
int res;
+ res = ar7_gpio_init();
+ if (res)
+ pr_warn("unable to register gpios: %d\n", res);
+
res = ar7_register_uarts();
if (res)
pr_err("unable to setup uart(s): %d\n", res);
--- a/arch/mips/ar7/prom.c
+++ b/arch/mips/ar7/prom.c
@@ -246,8 +246,6 @@ void __init prom_init(void)
ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
ar7_init_env((struct env_var *)fw_arg2);
console_config();
-
- ar7_gpio_init();
}
#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
^ permalink raw reply
* [PATCH 4.9 75/87] MIPS: AR7: Ensure that serial ports are properly set up
From: Greg Kroah-Hartman @ 2017-11-13 12:56 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oswald Buddenhagen, Jonas Gorski,
Florian Fainelli, Ralf Baechle, Yoshihiro YUNOMAE,
Nicolas Schichan, linux-mips, linux-serial, James Hogan
In-Reply-To: <20171113125615.304035578@linuxfoundation.org>
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream.
Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
never copied, resulting in a dead port.
Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type")
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[jonas.gorski: add Fixes tag]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17543/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/ar7/platform.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -576,6 +576,7 @@ static int __init ar7_register_uarts(voi
uart_port.type = PORT_AR7;
uart_port.uartclk = clk_get_rate(bus_clk) / 2;
uart_port.iotype = UPIO_MEM32;
+ uart_port.flags = UPF_FIXED_TYPE;
uart_port.regshift = 2;
uart_port.line = 0;
^ permalink raw reply
* [PATCH 4.13 20/33] MIPS: AR7: Defer registration of GPIO
From: Greg Kroah-Hartman @ 2017-11-13 12:56 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonas Gorski, Florian Fainelli,
Ralf Baechle, Yoshihiro YUNOMAE, Nicolas Schichan, linux-mips,
linux-serial, James Hogan
In-Reply-To: <20171113125611.096767733@linuxfoundation.org>
4.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonas Gorski <jonas.gorski@gmail.com>
commit e6b03ab63b4d270e0249f96536fde632409dc1dc upstream.
When called from prom init code, ar7_gpio_init() will fail as it will
call gpiochip_add() which relies on a working kmalloc() to alloc
the gpio_desc array and kmalloc is not useable yet at prom init time.
Move ar7_gpio_init() to ar7_register_devices() (a device_initcall)
where kmalloc works.
Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17542/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/ar7/platform.c | 4 ++++
arch/mips/ar7/prom.c | 2 --
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -653,6 +653,10 @@ static int __init ar7_register_devices(v
u32 val;
int res;
+ res = ar7_gpio_init();
+ if (res)
+ pr_warn("unable to register gpios: %d\n", res);
+
res = ar7_register_uarts();
if (res)
pr_err("unable to setup uart(s): %d\n", res);
--- a/arch/mips/ar7/prom.c
+++ b/arch/mips/ar7/prom.c
@@ -246,8 +246,6 @@ void __init prom_init(void)
ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
ar7_init_env((struct env_var *)fw_arg2);
console_config();
-
- ar7_gpio_init();
}
#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
^ permalink raw reply
* [PATCH 4.13 21/33] MIPS: AR7: Ensure that serial ports are properly set up
From: Greg Kroah-Hartman @ 2017-11-13 12:56 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oswald Buddenhagen, Jonas Gorski,
Florian Fainelli, Ralf Baechle, Yoshihiro YUNOMAE,
Nicolas Schichan, linux-mips, linux-serial, James Hogan
In-Reply-To: <20171113125611.096767733@linuxfoundation.org>
4.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
commit b084116f8587b222a2c5ef6dcd846f40f24b9420 upstream.
Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
never copied, resulting in a dead port.
Fixes: 154615d55459 ("MIPS: AR7: Use correct UART port type")
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[jonas.gorski: add Fixes tag]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17543/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/ar7/platform.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -575,6 +575,7 @@ static int __init ar7_register_uarts(voi
uart_port.type = PORT_AR7;
uart_port.uartclk = clk_get_rate(bus_clk) / 2;
uart_port.iotype = UPIO_MEM32;
+ uart_port.flags = UPF_FIXED_TYPE;
uart_port.regshift = 2;
uart_port.line = 0;
^ permalink raw reply
* [GIT PULL] TTY/Serial patches for 4.15-rc1
From: Greg KH @ 2017-11-13 16:19 UTC (permalink / raw)
To: Linus Torvalds, Jiri Slaby
Cc: Stephen Rothwell, Andrew Morton, linux-kernel, linux-serial
The following changes since commit 8a5776a5f49812d29fe4b2d0a2d71675c3facf3f:
Linux 4.14-rc4 (2017-10-08 20:53:29 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git/ tags/tty-4.15-rc1
for you to fetch changes up to 57f5d648c45c3d40a3257c06629c14fd53c383bc:
tty: ehv_bytechan: fix spelling mistake (2017-11-08 14:27:10 +0100)
----------------------------------------------------------------
TTY/Serial patches for 4.15-rc1
Here is the big tty/serial driver pull request for 4.15-rc1.
Lots of serial driver updates in here, some small vt cleanups, and a
raft of SPDX and license boilerplate cleanups, messing up the diffstat a
bit.
Nothing major, with no realy functional changes except better hardware
support for some platforms.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Aaron Sierra (1):
serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X
Allen Pais (10):
drivers: tty: imx: use setup_timer() helper.
drivers: tty: mux: use setup_timer() helper.
drivers: tty: vcc: use setup_timer() helper.
drivers: tty: max3100: use setup_timer() helper.
drivers: tty: 8250: use setup_timer() helper.
drivers: tty: pnx8xxx: use setup_timer() helper.
drivers: tty: n_gsm: use setup_timer() helper.
drivers: tty: sn_console: use setup_timer() helper.
drivers: tty: ifx6x60: use setup_timer() helper.
drivers: tty: sa1100: use setup_timer() helper.
Allen Yan (5):
serial: mvebu-uart: support probe of multiple ports
serial: mvebu-uart: add soft reset at probe
serial: mvebu-uart: add function to change baudrate
serial: mvebu-uart: clear state register before IRQ request
serial: mvebu-uart: add TX interrupt trigger for pulse interrupts
Andy Lowe (1):
serial: sh-sci: suppress warning for ports without dma channels
Andy Shevchenko (1):
serial: 8250_mid: Enable HSU on Intel Cedar Fork PCH
Antonio Borneo (1):
ttyport: trivial fix for some typo in comments
Arnd Bergmann (1):
serial: mvebu-uart: drop incorrect memset
Arvind Yadav (2):
serial-uartlite: pr_err() strings should end with newlines
tty: ehv_bytechan: fix spelling mistake
Bhumika Goyal (1):
tty: serial: make sport_uart_ops static and const
Christophe JAILLET (1):
tty: synclink: Reuse an existing error handling path
Colin Ian King (3):
tty: max3100: remove unused variable rts and remove unused assignment
serial: core: remove redundant assignment to port
tty: serial: jsm: remove redundant pointer ts
Ed Blake (2):
serial: Add define for max baud rate divisor
serial: 8250_dw: Improve clock rate setting
Fabio Estevam (1):
serial: fsl_lpuart: Remove unused 'bd' variable
Frédéric Danis (2):
serdev: Add ACPI support
ACPI / scan: Fix enumeration for special UART devices
Geert Uytterhoeven (1):
serial: sh-sci: Use of_device_get_match_data() helper
Gimcuan Hui (6):
tty: serial: jsm: Add space before the open brace
tty: serial: jsm: change the type of local variable
tty: serial: jsm: add blank line after declarations
tty: serial: jsm: delete space between function name and '('
tty: serial: jsm: fix coding style
tty: serial: jsm: add space before the open parenthesis '('
Greg Kroah-Hartman (6):
Merge 4.14-rc4 into tty-next
tty: add SPDX identifiers to all remaining files in drivers/tty/
tty: serial: Remove redundant license text
tty: hvc: Remove redundant license text
tty: serdev: Remove redundant license text
tty: Remove redundant license text
Ian Jamison (1):
serial: imx: Update cached mctrl value when changing RTS
Ji-Ze Hong (Peter Hong) (5):
serial: 8250_fintek: UART dynamic clocksource on Fintek F81866
serial: 8250_fintek: UART dynamic clocksource on Fintek F81216H
serial: 8250_fintek: fix warning reported from smatch
serial: 8250_fintek: Fix finding base_port with activated SuperIO
serial: 8250_fintek: Fix crash with baud rate B0
Jibin Xu (1):
sysrq : fix Show Regs call trace on ARM
Jiri Slaby (1):
mxser: remove unused parameters
Joe Perches (1):
vt: Use consistent logging style
Johan Hovold (6):
serdev: enable TTY port controller support by default
serdev: ttyport: enforce tty-driver open() requirement
serdev: ttyport: add missing open() error handling
serdev: fix registration of second slave
serdev: fix controller-allocation error handling
tty: fix tty_ldisc_receive_buf() documentation
Kees Cook (13):
tty: metag_da: Convert timers to use timer_setup()
serial: m32r_sio: Convert timers to use timer_setup()
tty/sysrq: Convert timers to use timer_setup()
tty: mips_ejtag_fdc: Convert timers to use timer_setup()
tty: amba-pl011: Convert timers to use timer_setup()
serial: 8250: Convert timers to use timer_setup()
serial: bfin_uart: Convert timers to use timer_setup()
serial: sccnxp: Convert timers to use timer_setup()
tty/serial: altera_uart: Convert timers to use timer_setup()
tty: vcc: Convert timers to use timer_setup()
tty: cyclades: Convert timers to use timer_setup()
tty/serial: atmel: Convert timers to use timer_setup()
serial: m32r_sio: Drop redundant .data assignment
Lukas Wunner (3):
serial: omap: Fix EFR write on RTS deassertion
serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()
serial: pl011: Adopt generic flag to store auto RTS status
Martin Townsend (1):
omap_serial: Removing superfluous check on no interrupt pending.
Martyn Welch (3):
serial: imx: Use RX_BUF_SIZE to set size of RX buffer
serial: imx: Switch setting dma_is_txing from "false" to "0"
serial: imx: Correct comment imx_flush_buffer()
Matthias Kaehlcke (1):
serial: sh-sci: Fix init data attribute for struct 'port_cfg'
Meng Xu (1):
tty: vt: remove multi-fetch, derive font.height from font.data
Miquel Raynal (4):
serial: mvebu-uart: use a generic way to access the registers
serial: mvebu-uart: dissociate RX and TX interrupts
serial: mvebu-uart: augment the maximum number of ports
serial: mvebu-uart: support extended port registers layout
Philipp Zabel (1):
serial: imx: add hibernation support
Ricardo Ribalda Delgado (2):
serial: 8250_fintek: Return -EINVAL on invalid configuration
serial: 8250_fintek: Disable delays for ports != 0
Romain Izard (1):
tty/serial: atmel: Prevent a warning on suspend
Romain Perier (1):
serial: imx: only set dma_is_rxing when DMA starts
Sascha Hauer (5):
serial: atmel: Use common rs485 device tree parsing function
serial: fsl_lpuart: Use common rs485 device tree parsing function
serial: omap-serial: Use common rs485 device tree parsing function
serial: imx: default to half duplex rs485
serial: imx: Use common rs485 device tree parsing function
Shubhrajyoti Datta (1):
tty: xilinx_uartps: move to arch_initcall for earlier console
Takatoshi Akiyama (1):
serial: sh-sci: Fix unlocked access to SCSCR register
Thomas Meyer (1):
vt: Use bsearch library function in is_double_width
Thomas Rohloff (1):
tty: serial: meson: allow baud-rates lower than 9600
Tomas Melin (1):
serial: 8250: fix potential deadlock in rs485-mode
Troy Kisky (2):
tty: serial: imx: disable ageing timer interrupt if dma in use
tty: serial: imx: remove dead code imx_dma_rxint
Ulrich Hecht (1):
serial: sh-sci: Support for variable HSCIF hardware RX timeout
Uwe Kleine-König (2):
serial: Add common rs485 device tree parsing function
dt-bindings: serial: document rs485 bindings for various devices
Vikas Manocha (2):
Arm: dts: stm32: remove extra compatible string for uart
Arm: dts: stm32: remove extra compatible string from DT & driver
Yehuda Yitschak (1):
serial: mvebu-uart: use driver name when requesting an interrupt
Yixun Lan (1):
serial: meson: add Magic SysRq support
nixiaoming (1):
tty fix oops when rmmod 8250
.../devicetree/bindings/dma/stm32-dma.txt | 2 +-
.../devicetree/bindings/serial/atmel-usart.txt | 1 +
.../devicetree/bindings/serial/fsl-imx-uart.txt | 1 +
.../devicetree/bindings/serial/fsl-lpuart.txt | 1 +
.../devicetree/bindings/serial/omap_serial.txt | 1 +
.../devicetree/bindings/serial/st,stm32-usart.txt | 10 +-
arch/arm/boot/dts/stm32f429.dtsi | 12 +-
arch/arm/boot/dts/stm32f746.dtsi | 12 +-
arch/arm/boot/dts/stm32h743.dtsi | 4 +-
drivers/acpi/scan.c | 37 +-
drivers/tty/amiserial.c | 1 +
drivers/tty/bfin_jtag_comm.c | 3 +-
drivers/tty/cyclades.c | 17 +-
drivers/tty/ehv_bytechan.c | 9 +-
drivers/tty/goldfish.c | 11 +-
drivers/tty/hvc/hvc_bfin_jtag.c | 3 +-
drivers/tty/hvc/hvc_console.c | 15 +-
drivers/tty/hvc/hvc_console.h | 15 +-
drivers/tty/hvc/hvc_dcc.c | 13 +-
drivers/tty/hvc/hvc_opal.c | 16 +-
drivers/tty/hvc/hvc_rtas.c | 15 +-
drivers/tty/hvc/hvc_tile.c | 11 +-
drivers/tty/hvc/hvc_udbg.c | 15 +-
drivers/tty/hvc/hvc_vio.c | 15 +-
drivers/tty/hvc/hvc_xen.c | 15 +-
drivers/tty/hvc/hvcs.c | 15 +-
drivers/tty/hvc/hvsi.c | 15 +-
drivers/tty/ipwireless/main.c | 1 +
drivers/tty/isicom.c | 6 +-
drivers/tty/metag_da.c | 16 +-
drivers/tty/mips_ejtag_fdc.c | 13 +-
drivers/tty/moxa.c | 6 +-
drivers/tty/mxser.c | 22 +-
drivers/tty/n_gsm.c | 18 +-
drivers/tty/n_hdlc.c | 3 +-
drivers/tty/n_null.c | 14 +-
drivers/tty/n_r3964.c | 4 +-
drivers/tty/n_tracerouter.c | 12 +-
drivers/tty/n_tracesink.c | 12 +-
drivers/tty/n_tracesink.h | 12 +-
drivers/tty/n_tty.c | 4 +-
drivers/tty/nozomi.c | 15 +-
drivers/tty/rocket.c | 15 +-
drivers/tty/serdev/Kconfig | 8 +
drivers/tty/serdev/core.c | 152 +++++--
drivers/tty/serdev/serdev-ttyport.c | 31 +-
drivers/tty/serial/21285.c | 1 +
drivers/tty/serial/8250/8250.h | 6 +-
drivers/tty/serial/8250/8250_accent.c | 5 +-
drivers/tty/serial/8250/8250_acorn.c | 5 +-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 6 +-
drivers/tty/serial/8250/8250_bcm2835aux.c | 6 +-
drivers/tty/serial/8250/8250_boca.c | 5 +-
drivers/tty/serial/8250/8250_core.c | 23 +-
drivers/tty/serial/8250/8250_dma.c | 6 +-
drivers/tty/serial/8250/8250_dw.c | 36 +-
drivers/tty/serial/8250/8250_early.c | 5 +-
drivers/tty/serial/8250/8250_em.c | 14 +-
drivers/tty/serial/8250/8250_exar.c | 5 +-
drivers/tty/serial/8250/8250_exar_st16c554.c | 5 +-
drivers/tty/serial/8250/8250_fintek.c | 123 ++++-
drivers/tty/serial/8250/8250_fourport.c | 5 +-
drivers/tty/serial/8250/8250_fsl.c | 5 +-
drivers/tty/serial/8250/8250_gsc.c | 6 +-
drivers/tty/serial/8250/8250_hp300.c | 1 +
drivers/tty/serial/8250/8250_hub6.c | 5 +-
drivers/tty/serial/8250/8250_ingenic.c | 10 +-
drivers/tty/serial/8250/8250_lpc18xx.c | 6 +-
drivers/tty/serial/8250/8250_lpss.c | 5 +-
drivers/tty/serial/8250/8250_mid.c | 11 +-
drivers/tty/serial/8250/8250_moxa.c | 5 +-
drivers/tty/serial/8250/8250_mtk.c | 13 +-
drivers/tty/serial/8250/8250_of.c | 7 +-
drivers/tty/serial/8250/8250_omap.c | 5 +-
drivers/tty/serial/8250/8250_pci.c | 6 +-
drivers/tty/serial/8250/8250_pnp.c | 5 +-
drivers/tty/serial/8250/8250_port.c | 16 +-
drivers/tty/serial/8250/8250_pxa.c | 7 +-
drivers/tty/serial/8250/8250_uniphier.c | 11 +-
drivers/tty/serial/8250/serial_cs.c | 1 +
drivers/tty/serial/altera_jtaguart.c | 6 +-
drivers/tty/serial/altera_uart.c | 14 +-
drivers/tty/serial/amba-pl010.c | 15 +-
drivers/tty/serial/amba-pl011.c | 32 +-
drivers/tty/serial/apbuart.c | 1 +
drivers/tty/serial/ar933x_uart.c | 5 +-
drivers/tty/serial/arc_uart.c | 5 +-
drivers/tty/serial/atmel_serial.c | 65 +--
drivers/tty/serial/atmel_serial.h | 6 +-
drivers/tty/serial/bcm63xx_uart.c | 5 +-
drivers/tty/serial/bfin_sport_uart.c | 5 +-
drivers/tty/serial/bfin_sport_uart.h | 3 +-
drivers/tty/serial/bfin_uart.c | 10 +-
drivers/tty/serial/clps711x.c | 6 +-
drivers/tty/serial/cpm_uart/cpm_uart.h | 6 +-
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 16 +-
drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c | 16 +-
drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c | 16 +-
drivers/tty/serial/digicolor-usart.c | 6 +-
drivers/tty/serial/dz.c | 1 +
drivers/tty/serial/earlycon-arm-semihost.c | 13 +-
drivers/tty/serial/earlycon.c | 5 +-
drivers/tty/serial/efm32-uart.c | 1 +
drivers/tty/serial/fsl_lpuart.c | 33 +-
drivers/tty/serial/icom.c | 16 +-
drivers/tty/serial/icom.h | 15 +-
drivers/tty/serial/ifx6x60.c | 20 +-
drivers/tty/serial/ifx6x60.h | 18 +-
drivers/tty/serial/imx.c | 103 ++---
drivers/tty/serial/ioc3_serial.c | 5 +-
drivers/tty/serial/ioc4_serial.c | 5 +-
drivers/tty/serial/ip22zilog.c | 1 +
drivers/tty/serial/jsm/jsm.h | 11 +-
drivers/tty/serial/jsm/jsm_cls.c | 11 +-
drivers/tty/serial/jsm/jsm_driver.c | 11 +-
drivers/tty/serial/jsm/jsm_neo.c | 11 +-
drivers/tty/serial/jsm/jsm_tty.c | 27 +-
drivers/tty/serial/kgdb_nmi.c | 5 +-
drivers/tty/serial/kgdboc.c | 5 +-
drivers/tty/serial/lantiq.c | 14 +-
drivers/tty/serial/lpc32xx_hs.c | 11 +-
drivers/tty/serial/m32r_sio.c | 14 +-
drivers/tty/serial/m32r_sio_reg.h | 4 +-
drivers/tty/serial/max3100.c | 16 +-
drivers/tty/serial/max310x.c | 6 +-
drivers/tty/serial/mcf.c | 6 +-
drivers/tty/serial/men_z135_uart.c | 5 +-
drivers/tty/serial/meson_uart.c | 31 +-
drivers/tty/serial/mpc52xx_uart.c | 5 +-
drivers/tty/serial/mps2-uart.c | 5 +-
drivers/tty/serial/mpsc.c | 6 +-
drivers/tty/serial/msm_serial.c | 10 +-
drivers/tty/serial/mux.c | 9 +-
drivers/tty/serial/mvebu-uart.c | 495 ++++++++++++++++-----
drivers/tty/serial/mxs-auart.c | 5 +-
drivers/tty/serial/netx-serial.c | 14 +-
drivers/tty/serial/omap-serial.c | 23 +-
drivers/tty/serial/owl-uart.c | 14 +-
drivers/tty/serial/pch_uart.c | 14 +-
drivers/tty/serial/pic32_uart.c | 3 +-
drivers/tty/serial/pic32_uart.h | 3 +-
drivers/tty/serial/pmac_zilog.c | 15 +-
drivers/tty/serial/pnx8xxx_uart.c | 11 +-
drivers/tty/serial/pxa.c | 6 +-
drivers/tty/serial/rp2.c | 5 +-
drivers/tty/serial/sa1100.c | 20 +-
drivers/tty/serial/samsung.c | 5 +-
drivers/tty/serial/samsung.h | 5 +-
drivers/tty/serial/sb1250-duart.c | 6 +-
drivers/tty/serial/sc16is7xx.c | 7 +-
drivers/tty/serial/sccnxp.c | 13 +-
drivers/tty/serial/serial-tegra.c | 13 +-
drivers/tty/serial/serial_core.c | 54 ++-
drivers/tty/serial/serial_ks8695.c | 7 +-
drivers/tty/serial/serial_mctrl_gpio.c | 11 +-
drivers/tty/serial/serial_mctrl_gpio.h | 12 +-
drivers/tty/serial/serial_txx9.c | 5 +-
drivers/tty/serial/sh-sci.c | 103 +++--
drivers/tty/serial/sh-sci.h | 3 +
drivers/tty/serial/sirfsoc_uart.c | 3 +-
drivers/tty/serial/sirfsoc_uart.h | 3 +-
drivers/tty/serial/sn_console.c | 23 +-
drivers/tty/serial/sprd_serial.c | 10 +-
drivers/tty/serial/st-asc.c | 7 +-
drivers/tty/serial/stm32-usart.c | 5 +-
drivers/tty/serial/stm32-usart.h | 2 +-
drivers/tty/serial/suncore.c | 1 +
drivers/tty/serial/sunhv.c | 1 +
drivers/tty/serial/sunsab.c | 1 +
drivers/tty/serial/sunsu.c | 1 +
drivers/tty/serial/sunzilog.c | 1 +
drivers/tty/serial/tilegx.c | 11 +-
drivers/tty/serial/timbuart.c | 14 +-
drivers/tty/serial/timbuart.h | 14 +-
drivers/tty/serial/uartlite.c | 7 +-
drivers/tty/serial/ucc_uart.c | 6 +-
drivers/tty/serial/vr41xx_siu.c | 15 +-
drivers/tty/serial/vt8500_serial.c | 10 +-
drivers/tty/serial/xilinx_uartps.c | 9 +-
drivers/tty/serial/zs.c | 1 +
drivers/tty/synclink.c | 6 +-
drivers/tty/synclink_gt.c | 3 +-
drivers/tty/synclinkmp.c | 2 +-
drivers/tty/sysrq.c | 18 +-
drivers/tty/tty_audit.c | 6 +-
drivers/tty/tty_baudrate.c | 1 +
drivers/tty/tty_buffer.c | 3 +-
drivers/tty/tty_io.c | 1 +
drivers/tty/tty_ioctl.c | 1 +
drivers/tty/tty_jobctrl.c | 1 +
drivers/tty/tty_ldisc.c | 1 +
drivers/tty/tty_ldsem.c | 4 +-
drivers/tty/tty_port.c | 5 +-
drivers/tty/vcc.c | 25 +-
drivers/tty/vt/consolemap.c | 1 +
drivers/tty/vt/keyboard.c | 1 +
drivers/tty/vt/vt.c | 107 ++---
fs/proc/proc_tty.c | 3 +-
include/acpi/acpi_bus.h | 2 +-
include/linux/cyclades.h | 3 +
include/linux/serial_core.h | 5 +
include/uapi/linux/serial_reg.h | 1 +
202 files changed, 1276 insertions(+), 1668 deletions(-)
^ permalink raw reply
* [PATCH v2] serial: 8250_pci: Add Amazon PCI serial device ID
From: Matt Wilson @ 2017-11-13 19:31 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Jiri Slaby, linux-serial, linux-kernel, Anthony Liguori,
Matt Wilson, stable
In-Reply-To: <20171113083111.GB22719@kroah.com>
From: Matt Wilson <msw@amazon.com>
This device will be used in future Amazon EC2 instances as the primary
serial port (i.e., data sent to this port will be available via the
GetConsoleOuput [1] EC2 API).
[1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.html
Cc: stable@vger.kernel.org
Signed-off-by: Matt Wilson <msw@amazon.com>
---
drivers/tty/serial/8250/8250_pci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 0c101a7..d4e7be8 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5137,6 +5137,9 @@ static const struct pci_device_id serial_pci_tbl[] = {
{ PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 },
{ PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 },
+ /* Amazon PCI serial device */
+ { PCI_DEVICE(0x1d0f, 0x8250), .driver_data = pbn_b0_1_115200 },
+
/*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
--
2.7.4
^ permalink raw reply related
* RE: [v11,1/4] drivers: jtag: Add JTAG core driver
From: Oleksandr Shamray @ 2017-11-14 10:34 UTC (permalink / raw)
To: 'Chip Bilbrey'
Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
openbmc-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org,
jiri-rHqAuBHg3fBzbRFIqnYvSA@public.gmane.org,
tklauser-93Khv+1bN0NyDzI6CaY1VQ@public.gmane.org,
linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
mec-WqBc5aa1uDFeoWH0uzbU5w@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
openocd-devel-owner-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, davem
In-Reply-To: <8760aoz78q.fsf-Gz1Ta9Qd61ZAfugRpC6u6w@public.gmane.org>
> -----Original Message-----
> From: Chip Bilbrey [mailto:chip-Gz1Ta9Qd61ZAfugRpC6u6w@public.gmane.org]
> Sent: Monday, November 6, 2017 12:33 AM
> To: Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
> Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org; arnd-r2nGTMty4D4@public.gmane.org; linux-
> kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org;
> devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; openbmc-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org;
> jiri-rHqAuBHg3fBzbRFIqnYvSA@public.gmane.org; tklauser-93Khv+1bN0NyDzI6CaY1VQ@public.gmane.org; linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org;
> mec-WqBc5aa1uDFeoWH0uzbU5w@public.gmane.org; Vadim Pasternak <vadimp-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>; system-sw-low-
> level <system-sw-low-level-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>; robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org; openocd-
> devel-owner-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org; linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org;
> davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org; mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org; Jiri Pirko <jiri-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
> Subject: Re: [v11,1/4] drivers: jtag: Add JTAG core driver
>
>
> Oleksandr Shamray writes:
[..]
> I notice the single-open()-per-device lock was dropped by request in an earlier
> revision of your patches, but multiple processes trying to drive a single JTAG
> master could wreak serious havoc if transactions get interleaved. Would
> something like an added JTAG_LOCKCHAIN/UNLOCKCHAIN
> ioctl() for exclusive client access be reasonable to prevent this?
>
Yes, it dropped by recommendation of Greg KH <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>.
Greg, what you can suggest about it. May be better to add again single-open()-per-device lock with right locking way like:
>if (mutex_lock_interruptible(&jtag->open_lock)) {
> return -ERESTARTSYS;
>}
>
>if (jtag->opened) {
> mutex_unlock(&jtag->open_lock);
> return -EINVAL;
>}
>
>nonseekable_open(inode, file);
>file->private_data = jtag;
>jtag->opened++;
>mutex_unlock(&jtag->open_lock);
>
Thaks.
> -Chip
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH RFC 3/3] MIPS: AR7: ensure the port type's FCR value is used
From: James Hogan @ 2017-11-14 11:02 UTC (permalink / raw)
To: Jonas Gorski
Cc: linux-mips, linux-serial, Ralf Baechle, Greg Kroah-Hartman,
Yoshihiro YUNOMAE, Florian Fainelli, Nicolas Schichan
In-Reply-To: <20171029152721.6770-4-jonas.gorski@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2135 bytes --]
On Sun, Oct 29, 2017 at 04:27:21PM +0100, Jonas Gorski wrote:
> Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt
> trigger I/F of FIFO buffers"), the port's default FCR value isn't used
> in serial8250_do_set_termios anymore, but copied over once in
> serial8250_config_port and then modified as needed.
>
> Unfortunately, serial8250_config_port will never be called if the port
> is shared between kernel and userspace, and the port's flag doesn't have
> UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.
>
> This causes garbled output from userspace:
>
> [ 5.220000] random: procd urandom read with 49 bits of entropy available
> ers
> [kee
>
> Fix this by forcing it to be configured on boot, resulting in the
> expected output:
>
> [ 5.250000] random: procd urandom read with 50 bits of entropy available
> Press the [f] key and hit [enter] to enter failsafe mode
> Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
>
> Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers")
> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
> ---
> I'm not sure if this is just AR7's issue, or if this points to a general
> issue for UARTs used as kernel console and login console with the "fixed"
> commit.
Thanks. Given nobody seems to have objected, I've applied to my
mips-fixes branch, with stable tag for 3.17+.
Cheers
James
>
> arch/mips/ar7/platform.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
> index 4674f1efbe7a..e1675c25d5d4 100644
> --- a/arch/mips/ar7/platform.c
> +++ b/arch/mips/ar7/platform.c
> @@ -575,7 +575,7 @@ static int __init ar7_register_uarts(void)
> uart_port.type = PORT_AR7;
> uart_port.uartclk = clk_get_rate(bus_clk) / 2;
> uart_port.iotype = UPIO_MEM32;
> - uart_port.flags = UPF_FIXED_TYPE;
> + uart_port.flags = UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF;
> uart_port.regshift = 2;
>
> uart_port.line = 0;
> --
> 2.13.2
>
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
* Re: [v11,1/4] drivers: jtag: Add JTAG core driver
From: gregkh @ 2017-11-14 11:10 UTC (permalink / raw)
To: Oleksandr Shamray
Cc: 'Chip Bilbrey', arnd@arndb.de,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
openbmc@lists.ozlabs.org, joel@jms.id.au, jiri@resnulli.us,
tklauser@distanz.ch, linux-serial@vger.kernel.org, mec@shout.net,
robh+dt@kernel.org, openocd-devel-owner@lists.sourceforge.net,
linux-api@vger.kernel.org, davem@davemloft.net
In-Reply-To: <DB6PR0501MB219753AC43515148F39CC2D0B1280@DB6PR0501MB2197.eurprd05.prod.outlook.com>
On Tue, Nov 14, 2017 at 10:34:49AM +0000, Oleksandr Shamray wrote:
> > -----Original Message-----
> > From: Chip Bilbrey [mailto:chip@bilbrey.org]
> > Sent: Monday, November 6, 2017 12:33 AM
> > To: Oleksandr Shamray <oleksandrs@mellanox.com>
> > Cc: gregkh@linuxfoundation.org; arnd@arndb.de; linux-
> > kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> > devicetree@vger.kernel.org; openbmc@lists.ozlabs.org; joel@jms.id.au;
> > jiri@resnulli.us; tklauser@distanz.ch; linux-serial@vger.kernel.org;
> > mec@shout.net; Vadim Pasternak <vadimp@mellanox.com>; system-sw-low-
> > level <system-sw-low-level@mellanox.com>; robh+dt@kernel.org; openocd-
> > devel-owner@lists.sourceforge.net; linux-api@vger.kernel.org;
> > davem@davemloft.net; mchehab@kernel.org; Jiri Pirko <jiri@mellanox.com>
> > Subject: Re: [v11,1/4] drivers: jtag: Add JTAG core driver
> >
> >
> > Oleksandr Shamray writes:
>
> [..]
>
> > I notice the single-open()-per-device lock was dropped by request in an earlier
> > revision of your patches, but multiple processes trying to drive a single JTAG
> > master could wreak serious havoc if transactions get interleaved. Would
> > something like an added JTAG_LOCKCHAIN/UNLOCKCHAIN
> > ioctl() for exclusive client access be reasonable to prevent this?
> >
>
> Yes, it dropped by recommendation of Greg KH <gregkh@linuxfoundation.org>.
I asked to drop it as you didn't even implement it to work correctly :)
> Greg, what you can suggest about it. May be better to add again single-open()-per-device lock with right locking way like:
>
> >if (mutex_lock_interruptible(&jtag->open_lock)) {
You would stall an open? Why not just return saying you can't do that?
Anyway, if you want to only have one access to the device at a time,
great, but do it in a way that works properly.
thanks,
greg k-h
^ permalink raw reply
* Re: [v11,1/4] drivers: jtag: Add JTAG core driver
From: Russell King - ARM Linux @ 2017-11-14 11:19 UTC (permalink / raw)
To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org
Cc: Oleksandr Shamray,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
jiri-rHqAuBHg3fBzbRFIqnYvSA@public.gmane.org,
'Chip Bilbrey', arnd-r2nGTMty4D4@public.gmane.org,
linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
openbmc-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
openocd-devel-owner-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
mec-WqBc5aa1uDFeoWH0uzbU5w@public.gmane.org, Jiri Pirko,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org,
linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
tklauser-93Khv+1bN0NyDzI6CaY1VQ@public.gmane.org,
mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
In-Reply-To: <20171114111046.GA23820-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
On Tue, Nov 14, 2017 at 12:10:46PM +0100, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org wrote:
> On Tue, Nov 14, 2017 at 10:34:49AM +0000, Oleksandr Shamray wrote:
> > Greg, what you can suggest about it. May be better to add again single-open()-per-device lock with right locking way like:
> >
> > >if (mutex_lock_interruptible(&jtag->open_lock)) {
>
> You would stall an open? Why not just return saying you can't do that?
Greg, I think you need to look at the code again.
>From the snippet in the email, this lock is not held while the device is
open, as you apparently think it is. It's a short-term lock that is
held to ensure atomic access to the jtag->opened member, so that two
concurrent opens are unable to operate lock-step, resulting in
jtag->opened becoming 2.
The open function snippet in the email drops the lock as soon as it has
incremented jtag->opened, or encounters an error.
It seems entirely sensible, rather than using an atomic_t counter, as
it means that other openers are held off until the current opener has
either succeeded in opening the device or failed to open it.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up
^ permalink raw reply
* Re: [v11,1/4] drivers: jtag: Add JTAG core driver
From: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r @ 2017-11-14 11:31 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: Oleksandr Shamray,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
jiri-rHqAuBHg3fBzbRFIqnYvSA@public.gmane.org,
'Chip Bilbrey', arnd-r2nGTMty4D4@public.gmane.org,
linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
openbmc-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
openocd-devel-owner-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
mec-WqBc5aa1uDFeoWH0uzbU5w@public.gmane.org, Jiri Pirko,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org,
linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
tklauser-93Khv+1bN0NyDzI6CaY1VQ@public.gmane.org,
mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
In-Reply-To: <20171114111916.GO12318-l+eeeJia6m9URfEZ8mYm6t73F7V6hmMc@public.gmane.org>
On Tue, Nov 14, 2017 at 11:19:16AM +0000, Russell King - ARM Linux wrote:
> On Tue, Nov 14, 2017 at 12:10:46PM +0100, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org wrote:
> > On Tue, Nov 14, 2017 at 10:34:49AM +0000, Oleksandr Shamray wrote:
> > > Greg, what you can suggest about it. May be better to add again single-open()-per-device lock with right locking way like:
> > >
> > > >if (mutex_lock_interruptible(&jtag->open_lock)) {
> >
> > You would stall an open? Why not just return saying you can't do that?
>
> Greg, I think you need to look at the code again.
Heh, sorry, I probably got it wrong. I'll be glad to review it in a
real patch when needed, but not in the middle of the merge window :)
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [patch v12 0/4] JTAG driver introduction
From: Oleksandr Shamray @ 2017-11-14 16:11 UTC (permalink / raw)
To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, arnd-r2nGTMty4D4
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, openbmc-uLR06cmDAlY/bJ5BZ2RsiQ,
joel-U3u1mxZcP9KHXe+LvDLADg, jiri-rHqAuBHg3fBzbRFIqnYvSA,
tklauser-93Khv+1bN0NyDzI6CaY1VQ,
linux-serial-u79uwXL29TY76Z2rM5mHXA, mec-WqBc5aa1uDFeoWH0uzbU5w,
vadimp-VPRAkNaXOzVWk0Htik3J/w,
system-sw-low-level-VPRAkNaXOzVWk0Htik3J/w,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
openocd-devel-owner-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
linux-api-u79uwXL29TY76Z2rM5mHXA, davem-fT/PcQaiUtIeIZ0/mPfg9Q,
mchehab-DgEjT+Ai2ygdnm+yROfE0A, Oleksandr Shamray
When a need raise up to use JTAG interface for system's devices
programming or CPU debugging, usually the user layer
application implements jtag protocol by bit-bang or using a
proprietary connection to vendor hardware.
This method can be slow and not generic.
We propose to implement general JTAG interface and infrastructure
to communicate with user layer application. In such way, we can
have the standard JTAG interface core part and separation from
specific HW implementation.
This allow new capability to debug the CPU or program system's
device via BMC without additional devices nor cost.
This patch purpose is to add JTAG master core infrastructure by
defining new JTAG class and provide generic JTAG interface
to allow hardware specific drivers to connect this interface.
This will enable all JTAG drivers to use the common interface
part and will have separate for hardware implementation.
The JTAG (Joint Test Action Group) core driver provides minimal generic
JTAG interface, which can be used by hardware specific JTAG master
controllers. By providing common interface for the JTAG controllers,
user space device programing is hardware independent.
Modern SoC which in use for embedded system' equipped with
internal JTAG master interface.
This interface is used for programming and debugging system's
hardware components, like CPLD, FPGA, CPU, voltage and
industrial controllers.
Firmware for such devices can be upgraded through JTAG interface during
Runtime. The JTAG standard support for multiple devices programming,
is in case their lines are daisy-chained together.
For example, systems which equipped with host CPU, BMC SoC or/and
number of programmable devices are capable to connect a pin and
select system components dynamically for programming and debugging,
This is using by the BMC which is equipped with internal SoC master
controller.
For example:
BMC JTAG master --> pin selected to CPLDs chain for programming (filed
upgrade, production)
BMC JTAG master --> pin selected to voltage monitors for programming
(field upgrade, production)
BMC JTAG master --> pin selected to host CPU (on-site debugging
and developers debugging)
For example, we can have application in user space which using calls
to JTAG driver executes CPLD programming directly from SVF file
The JTAG standard (IEEE 1149.1) defines the next connector pins:
- TDI (Test Data In);
- TDO (Test Data Out);
- TCK (Test Clock);
- TMS (Test Mode Select);
- TRST (Test Reset) (Optional);
The SoC equipped with JTAG master controller, performs
device programming on command or vector level. For example
a file in a standard SVF (Serial Vector Format) that contains
boundary scan vectors, can be used by sending each vector
to the JTAG interface and the JTAG controller will execute
the programming.
Initial version provides the system calls set for:
- SIR (Scan Instruction Register, IEEE 1149.1 Data Register scan);
- SDR (Scan Data Register, IEEE 1149.1 Instruction Register scan);
- RUNTEST (Forces the IEEE 1149.1 bus to a run state for a specified
number of clocks.
SoC which are not equipped with JTAG master interface, can be built
on top of JTAG core driver infrastructure, by applying bit-banging of
TDI, TDO, TCK and TMS pins within the hardware specific driver.
Oleksandr Shamray (4):
drivers: jtag: Add JTAG core driver
drivers: jtag: Add Aspeed SoC 24xx and 25xx families JTAG master
driver
Documentation: jtag: Add bindings for Aspeed SoC 24xx and 25xx
families JTAG master driver
Documentation: jtag: Add ABI documentation
Documentation/ABI/testing/jtag-dev | 27 +
.../devicetree/bindings/jtag/aspeed-jtag.txt | 18 +
Documentation/ioctl/ioctl-number.txt | 2 +
MAINTAINERS | 10 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/jtag/Kconfig | 29 +
drivers/jtag/Makefile | 2 +
drivers/jtag/jtag-aspeed.c | 782 ++++++++++++++++++++
drivers/jtag/jtag.c | 292 ++++++++
include/linux/jtag.h | 46 ++
include/uapi/linux/jtag.h | 105 +++
12 files changed, 1316 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/jtag-dev
create mode 100644 Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
create mode 100644 drivers/jtag/Kconfig
create mode 100644 drivers/jtag/Makefile
create mode 100644 drivers/jtag/jtag-aspeed.c
create mode 100644 drivers/jtag/jtag.c
create mode 100644 include/linux/jtag.h
create mode 100644 include/uapi/linux/jtag.h
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [patch v12 1/4] drivers: jtag: Add JTAG core driver
From: Oleksandr Shamray @ 2017-11-14 16:11 UTC (permalink / raw)
To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, arnd-r2nGTMty4D4
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, openbmc-uLR06cmDAlY/bJ5BZ2RsiQ,
joel-U3u1mxZcP9KHXe+LvDLADg, jiri-rHqAuBHg3fBzbRFIqnYvSA,
tklauser-93Khv+1bN0NyDzI6CaY1VQ,
linux-serial-u79uwXL29TY76Z2rM5mHXA, mec-WqBc5aa1uDFeoWH0uzbU5w,
vadimp-VPRAkNaXOzVWk0Htik3J/w,
system-sw-low-level-VPRAkNaXOzVWk0Htik3J/w,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
openocd-devel-owner-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
linux-api-u79uwXL29TY76Z2rM5mHXA, davem-fT/PcQaiUtIeIZ0/mPfg9Q,
mchehab-DgEjT+Ai2ygdnm+yROfE0A, Oleksandr Shamray, Jiri Pirko
In-Reply-To: <1510675867-24276-1-git-send-email-oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Initial patch for JTAG driver
JTAG class driver provide infrastructure to support hardware/software
JTAG platform drivers. It provide user layer API interface for flashing
and debugging external devices which equipped with JTAG interface
using standard transactions.
Driver exposes set of IOCTL to user space for:
- XFER:
- SIR (Scan Instruction Register, IEEE 1149.1 Data Register scan);
- SDR (Scan Data Register, IEEE 1149.1 Instruction Register scan);
- RUNTEST (Forces the IEEE 1149.1 bus to a run state for a specified
number of clocks).
- SIOCFREQ/GIOCFREQ for setting and reading JTAG frequency.
Driver core provides set of internal APIs for allocation and
registration:
- jtag_register;
- jtag_unregister;
- jtag_alloc;
- jtag_free;
Platform driver on registration with jtag-core creates the next
entry in dev folder:
/dev/jtagX
Signed-off-by: Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Signed-off-by: Jiri Pirko <jiri-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
---
v11->v12
Comments pointed by Greg KH <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
- Change jtag.h licence type to
SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
and reorder line with license in description
Chip Bilbrey <chip-Gz1Ta9Qd61ZAfugRpC6u6w@public.gmane.org>
- Remove Apeed reference from uapi jtag.h header
- Remove access mode from xfer and idle transactions
- Add new ioctl JTAG_SIOCMODE for set hw mode
- Add only one open per JTAG port blocking with mutex blocking
v10->v11
Notifications from kbuild test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
- include types.h headeri to jtag.h
- fix incompatible type of xfer callback
- remove rdundant class defination
- Fix return order in case of xfer error
V9->v10
Comments pointed by Greg KH <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
- remove unnecessary alignment for pirv data
- move jtag_copy_to_user and jtag_copy_from_user code just to ioctl
- move int jtag_run_test_idle_op and jtag_xfer_op code
just to ioctl
- change return error codes to more applicable
- add missing error checks
- fix error check order in ioctl
- remove unnecessary blank lines
- add param validation to ioctl
- remove compat_ioctl
- remove only one open per JTAG port blocking.
User will care about this.
- Fix idr memory leak on jtag_exit
- change cdev device type to misc
V8->v9
Comments pointed by Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
- use get_user() instead of __get_user().
- change jtag->open type from int to atomic_t
- remove spinlock on jtg_open
- remove mutex on jtag_register
- add unregister_chrdev_region on jtag_init err
- add unregister_chrdev_region on jtag_exit
- remove unnecessary pointer casts
- add *data parameter to xfer function prototype
v7->v8
Comments pointed by Moritz Fischer <moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org>
- Fix misspelling s/friver/driver
v6->v7
Notifications from kbuild test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
- Remove include asm/types.h from jtag.h
- Add include <linux/types.h> to jtag.c
v5->v6
v4->v5
v3->v4
Comments pointed by Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
- change transaction pointer tdio type to __u64
- change internal status type from enum to __u32
- reorder jtag_xfer members to avoid the implied padding
- add __packed attribute to jtag_xfer and jtag_run_test_idle
v2->v3
Notifications from kbuild test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
- Change include path to <linux/types.h> in jtag.h
v1->v2
Comments pointed by Greg KH <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
- Change license type from GPLv2/BSD to GPLv2
- Change type of variables which crossed user/kernel to __type
- Remove "default n" from Kconfig
Comments pointed by Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
- Change list_add_tail in jtag_unregister to list_del
Comments pointed by Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
- Add SPDX-License-Identifier instead of license text
Comments pointed by Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
- Change __copy_to_user to memdup_user
- Change __put_user to put_user
- Change type of variables to __type for compatible 32 and 64-bit systems
- Add check for maximum xfer data size
- Change lookup data mechanism to get jtag data from inode
- Add .compat_ioctl to file ops
- Add mem alignment for jtag priv data
Comments pointed by Tobias Klauser <tklauser-93Khv+1bN0NyDzI6CaY1VQ@public.gmane.org>
- Change function names to avoid match with variable types
- Fix description for jtag_ru_test_idle in uapi jtag.h
- Fix misprints IDEL/IDLE, trough/through
---
Documentation/ioctl/ioctl-number.txt | 2 +
MAINTAINERS | 10 ++
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/jtag/Kconfig | 16 ++
drivers/jtag/Makefile | 1 +
drivers/jtag/jtag.c | 292 ++++++++++++++++++++++++++++++++++
include/linux/jtag.h | 46 ++++++
include/uapi/linux/jtag.h | 105 ++++++++++++
9 files changed, 475 insertions(+), 0 deletions(-)
create mode 100644 drivers/jtag/Kconfig
create mode 100644 drivers/jtag/Makefile
create mode 100644 drivers/jtag/jtag.c
create mode 100644 include/linux/jtag.h
create mode 100644 include/uapi/linux/jtag.h
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 3e3fdae..1af2508 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -321,6 +321,8 @@ Code Seq#(hex) Include File Comments
0xB0 all RATIO devices in development:
<mailto:vgo-/IYFIZglx74@public.gmane.org>
0xB1 00-1F PPPoX <mailto:mostrows-TTukF6hB3AoKZpuMuFhwt/d9D2ou9A/h@public.gmane.org>
+0xB2 00-0f linux/jtag.h JTAG driver
+ <mailto:oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
0xB3 00 linux/mmc/ioctl.h
0xB4 00-0F linux/gpio.h <mailto:linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
0xB5 00-0F uapi/linux/rpmsg.h <mailto:linux-remoteproc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
diff --git a/MAINTAINERS b/MAINTAINERS
index 205d397..dfcf49c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7292,6 +7292,16 @@ L: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
S: Maintained
F: drivers/tty/serial/jsm/
+JTAG SUBSYSTEM
+M: Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
+M: Vadim Pasternak <vadimp-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
+S: Maintained
+F: include/linux/jtag.h
+F: include/uapi/linux/jtag.h
+F: drivers/jtag/
+F: Documentation/devicetree/bindings/jtag/
+F: Documentation/ABI/testing/jtag-cdev
+
K10TEMP HARDWARE MONITORING DRIVER
M: Clemens Ladisch <clemens-P6GI/4k7KOmELgA04lAiVw@public.gmane.org>
L: linux-hwmon-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 505c676..2214678 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -208,4 +208,6 @@ source "drivers/tee/Kconfig"
source "drivers/mux/Kconfig"
+source "drivers/jtag/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index dfdcda0..6a2059b 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -182,3 +182,4 @@ obj-$(CONFIG_FPGA) += fpga/
obj-$(CONFIG_FSI) += fsi/
obj-$(CONFIG_TEE) += tee/
obj-$(CONFIG_MULTIPLEXER) += mux/
+obj-$(CONFIG_JTAG) += jtag/
diff --git a/drivers/jtag/Kconfig b/drivers/jtag/Kconfig
new file mode 100644
index 0000000..0fad1a3
--- /dev/null
+++ b/drivers/jtag/Kconfig
@@ -0,0 +1,16 @@
+menuconfig JTAG
+ tristate "JTAG support"
+ ---help---
+ This provides basic core functionality support for jtag class devices
+ Hardware equipped with JTAG microcontroller which can be built
+ on top of this drivers. Driver exposes the set of IOCTL to the
+ user space for:
+ SIR (Scan Instruction Register, IEEE 1149.1 Data Register scan);
+ SDR (Scan Data Register, IEEE 1149.1 Instruction Register scan);
+ RUNTEST (Forces IEEE 1149.1 bus to a run state for specified
+ number of clocks).
+
+ If you want this support, you should say Y here.
+
+ To compile this driver as a module, choose M here: the module will
+ be called jtag.
diff --git a/drivers/jtag/Makefile b/drivers/jtag/Makefile
new file mode 100644
index 0000000..af37493
--- /dev/null
+++ b/drivers/jtag/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_JTAG) += jtag.o
diff --git a/drivers/jtag/jtag.c b/drivers/jtag/jtag.c
new file mode 100644
index 0000000..fbeba84
--- /dev/null
+++ b/drivers/jtag/jtag.c
@@ -0,0 +1,292 @@
+/*
+ * drivers/jtag/jtag.c
+ *
+ * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2017 Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/jtag.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/rtnetlink.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <uapi/linux/jtag.h>
+
+#define JTAG_NAME "jtag0"
+#define MAX_JTAG_NAME_LEN (sizeof("jtag") + 5)
+
+struct jtag {
+ struct miscdevice miscdev;
+ struct device *dev;
+ const struct jtag_ops *ops;
+ int id;
+ bool opened;
+ struct mutex open_lock;
+ unsigned long priv[0];
+};
+
+static DEFINE_IDA(jtag_ida);
+
+void *jtag_priv(struct jtag *jtag)
+{
+ return jtag->priv;
+}
+EXPORT_SYMBOL_GPL(jtag_priv);
+
+static long jtag_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct jtag *jtag = file->private_data;
+ struct jtag_run_test_idle idle;
+ struct jtag_xfer xfer;
+ u8 *xfer_data;
+ u32 data_size;
+ u32 value;
+ int err;
+
+ if (!arg)
+ return -EINVAL;
+
+ switch (cmd) {
+ case JTAG_GIOCFREQ:
+
+ if (jtag->ops->freq_get)
+ err = jtag->ops->freq_get(jtag, &value);
+ else
+ err = -EOPNOTSUPP;
+ if (err)
+ break;
+
+ if (put_user(value, (__u32 *)arg))
+ err = -EFAULT;
+ break;
+
+ case JTAG_SIOCFREQ:
+ if (get_user(value, (__u32 *)arg))
+ return -EFAULT;
+ if (value == 0)
+ return -EINVAL;
+
+ if (jtag->ops->freq_set)
+ err = jtag->ops->freq_set(jtag, value);
+ else
+ err = -EOPNOTSUPP;
+ break;
+
+ case JTAG_IOCRUNTEST:
+ if (copy_from_user(&idle, (void *)arg,
+ sizeof(struct jtag_run_test_idle)))
+ return -EFAULT;
+
+ if (idle.endstate > JTAG_STATE_PAUSEDR)
+ return -EINVAL;
+
+ if (jtag->ops->idle)
+ err = jtag->ops->idle(jtag, &idle);
+ else
+ err = -EOPNOTSUPP;
+ break;
+
+ case JTAG_IOCXFER:
+ if (copy_from_user(&xfer, (void *)arg,
+ sizeof(struct jtag_xfer)))
+ return -EFAULT;
+
+ if (xfer.length >= JTAG_MAX_XFER_DATA_LEN)
+ return -EINVAL;
+
+ if (xfer.type > JTAG_SDR_XFER)
+ return -EINVAL;
+
+ if (xfer.direction > JTAG_WRITE_XFER)
+ return -EINVAL;
+
+ if (xfer.endstate > JTAG_STATE_PAUSEDR)
+ return -EINVAL;
+
+ data_size = DIV_ROUND_UP(xfer.length, BITS_PER_BYTE);
+ xfer_data = memdup_user(u64_to_user_ptr(xfer.tdio), data_size);
+
+ if (!xfer_data)
+ return -EFAULT;
+
+ if (jtag->ops->xfer) {
+ err = jtag->ops->xfer(jtag, &xfer, xfer_data);
+ } else {
+ kfree(xfer_data);
+ return -EOPNOTSUPP;
+ }
+
+ if (err) {
+ kfree(xfer_data);
+ return -EFAULT;
+ }
+
+ err = copy_to_user(u64_to_user_ptr(xfer.tdio),
+ (void *)(xfer_data), data_size);
+
+ if (err) {
+ kfree(xfer_data);
+ return -EFAULT;
+ }
+
+ kfree(xfer_data);
+ if (copy_to_user((void *)arg, &xfer, sizeof(struct jtag_xfer)))
+ return -EFAULT;
+ break;
+
+ case JTAG_GIOCSTATUS:
+ if (jtag->ops->status_get)
+ err = jtag->ops->status_get(jtag, &value);
+ else
+ err = -EOPNOTSUPP;
+ if (err)
+ break;
+
+ err = put_user(value, (__u32 *)arg);
+ if (err)
+ err = -EFAULT;
+ break;
+ case JTAG_SIOCMODE:
+ if (get_user(value, (__u32 *)arg))
+ return -EFAULT;
+ if (value == 0)
+ return -EINVAL;
+
+ if (jtag->ops->mode_set)
+ err = jtag->ops->mode_set(jtag, value);
+ else
+ err = -EOPNOTSUPP;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return err;
+}
+
+static int jtag_open(struct inode *inode, struct file *file)
+{
+ struct jtag *jtag = container_of(file->private_data, struct jtag,
+ miscdev);
+
+ if (mutex_lock_interruptible(&jtag->open_lock))
+ return -ERESTARTSYS;
+
+ if (jtag->opened) {
+ mutex_unlock(&jtag->open_lock);
+ return -EINVAL;
+ }
+
+ nonseekable_open(inode, file);
+ file->private_data = jtag;
+ jtag->opened = true;
+ mutex_unlock(&jtag->open_lock);
+ return 0;
+}
+
+static int jtag_release(struct inode *inode, struct file *file)
+{
+ struct jtag *jtag = file->private_data;
+
+ mutex_lock(&jtag->open_lock);
+ jtag->opened = false;
+ mutex_unlock(&jtag->open_lock);
+ return 0;
+}
+
+static const struct file_operations jtag_fops = {
+ .owner = THIS_MODULE,
+ .open = jtag_open,
+ .release = jtag_release,
+ .llseek = noop_llseek,
+ .unlocked_ioctl = jtag_ioctl,
+};
+
+struct jtag *jtag_alloc(size_t priv_size, const struct jtag_ops *ops)
+{
+ struct jtag *jtag;
+
+ jtag = kzalloc(sizeof(*jtag) + round_up(priv_size, ARCH_DMA_MINALIGN),
+ GFP_KERNEL);
+ if (!jtag)
+ return NULL;
+
+ jtag->ops = ops;
+ return jtag;
+}
+EXPORT_SYMBOL_GPL(jtag_alloc);
+
+void jtag_free(struct jtag *jtag)
+{
+ kfree(jtag);
+}
+EXPORT_SYMBOL_GPL(jtag_free);
+
+int jtag_register(struct jtag *jtag)
+{
+ char *name;
+ int err;
+ int id;
+
+ id = ida_simple_get(&jtag_ida, 0, 0, GFP_KERNEL);
+ if (id < 0)
+ return id;
+
+ jtag->id = id;
+
+ name = kzalloc(MAX_JTAG_NAME_LEN, GFP_KERNEL);
+ if (!name) {
+ err = -ENOMEM;
+ goto err_jtag_alloc;
+ }
+
+ err = snprintf(name, MAX_JTAG_NAME_LEN, "jtag%d", id);
+ if (err < 0)
+ goto err_jtag_name;
+
+ mutex_init(&jtag->open_lock);
+ jtag->miscdev.fops = &jtag_fops;
+ jtag->miscdev.minor = MISC_DYNAMIC_MINOR;
+ jtag->miscdev.name = name;
+
+ err = misc_register(&jtag->miscdev);
+ if (err)
+ dev_err(jtag->dev, "Unable to register device\n");
+ else
+ return 0;
+ jtag->opened = false;
+
+err_jtag_name:
+ kfree(name);
+err_jtag_alloc:
+ ida_simple_remove(&jtag_ida, id);
+ return err;
+}
+EXPORT_SYMBOL_GPL(jtag_register);
+
+void jtag_unregister(struct jtag *jtag)
+{
+ misc_deregister(&jtag->miscdev);
+ kfree(jtag->miscdev.name);
+ ida_simple_remove(&jtag_ida, jtag->id);
+}
+EXPORT_SYMBOL_GPL(jtag_unregister);
+
+static void __exit jtag_exit(void)
+{
+ ida_destroy(&jtag_ida);
+}
+
+module_exit(jtag_exit);
+
+MODULE_AUTHOR("Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>");
+MODULE_DESCRIPTION("Generic jtag support");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/jtag.h b/include/linux/jtag.h
new file mode 100644
index 0000000..66b6389
--- /dev/null
+++ b/include/linux/jtag.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * include/linux/jtag.h - JTAG class driver
+ *
+ * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2017 Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
+ */
+
+#ifndef __JTAG_H
+#define __JTAG_H
+
+#include <uapi/linux/jtag.h>
+
+#ifndef ARCH_DMA_MINALIGN
+#define ARCH_DMA_MINALIGN 1
+#endif
+
+#define jtag_u64_to_ptr(arg) ((void *)(uintptr_t)arg)
+
+#define JTAG_MAX_XFER_DATA_LEN 65535
+
+struct jtag;
+/**
+ * struct jtag_ops - callbacks for jtag control functions:
+ *
+ * @freq_get: get frequency function. Filled by device driver
+ * @freq_set: set frequency function. Filled by device driver
+ * @status_get: set status function. Filled by device driver
+ * @idle: set JTAG to idle state function. Filled by device driver
+ * @xfer: send JTAG xfer function. Filled by device driver
+ */
+struct jtag_ops {
+ int (*freq_get)(struct jtag *jtag, u32 *freq);
+ int (*freq_set)(struct jtag *jtag, u32 freq);
+ int (*status_get)(struct jtag *jtag, u32 *state);
+ int (*idle)(struct jtag *jtag, struct jtag_run_test_idle *idle);
+ int (*xfer)(struct jtag *jtag, struct jtag_xfer *xfer, u8 *xfer_data);
+ int (*mode_set)(struct jtag *jtag, u32 mode_mask);
+};
+
+void *jtag_priv(struct jtag *jtag);
+int jtag_register(struct jtag *jtag);
+void jtag_unregister(struct jtag *jtag);
+struct jtag *jtag_alloc(size_t priv_size, const struct jtag_ops *ops);
+void jtag_free(struct jtag *jtag);
+
+#endif /* __JTAG_H */
diff --git a/include/uapi/linux/jtag.h b/include/uapi/linux/jtag.h
new file mode 100644
index 0000000..b6c4dde
--- /dev/null
+++ b/include/uapi/linux/jtag.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
+ * include/uapi/linux/jtag.h - JTAG class driver uapi
+ *
+ * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2017 Oleksandr Shamray <oleksandrs-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
+ */
+
+#ifndef __UAPI_LINUX_JTAG_H
+#define __UAPI_LINUX_JTAG_H
+
+#include <linux/types.h>
+/*
+ * JTAG_XFER_HW_MODE: JTAG hardware mode. Used to set HW drived or bitbang
+ * mode. This is bitmask param of ioctl JTAG_SIOCMODE command
+ */
+#define JTAG_XFER_HW_MODE 1
+
+/**
+ * enum jtag_endstate:
+ *
+ * @JTAG_STATE_IDLE: JTAG state machine IDLE state
+ * @JTAG_STATE_PAUSEIR: JTAG state machine PAUSE_IR state
+ * @JTAG_STATE_PAUSEDR: JTAG state machine PAUSE_DR state
+ */
+enum jtag_endstate {
+ JTAG_STATE_IDLE,
+ JTAG_STATE_PAUSEIR,
+ JTAG_STATE_PAUSEDR,
+};
+
+/**
+ * enum jtag_xfer_type:
+ *
+ * @JTAG_SIR_XFER: SIR transfer
+ * @JTAG_SDR_XFER: SDR transfer
+ */
+enum jtag_xfer_type {
+ JTAG_SIR_XFER,
+ JTAG_SDR_XFER,
+};
+
+/**
+ * enum jtag_xfer_direction:
+ *
+ * @JTAG_READ_XFER: read transfer
+ * @JTAG_WRITE_XFER: write transfer
+ */
+enum jtag_xfer_direction {
+ JTAG_READ_XFER,
+ JTAG_WRITE_XFER,
+};
+
+/**
+ * struct jtag_run_test_idle - forces JTAG state machine to
+ * RUN_TEST/IDLE state
+ *
+ * @reset: 0 - run IDLE/PAUSE from current state
+ * 1 - go through TEST_LOGIC/RESET state before IDLE/PAUSE
+ * @end: completion flag
+ * @tck: clock counter
+ *
+ * Structure represents interface to JTAG device for jtag idle
+ * execution.
+ */
+struct jtag_run_test_idle {
+ __u8 reset;
+ __u8 endstate;
+ __u8 tck;
+};
+
+/**
+ * struct jtag_xfer - jtag xfer:
+ *
+ * @type: transfer type
+ * @direction: xfer direction
+ * @length: xfer bits len
+ * @tdio : xfer data array
+ * @endir: xfer end state
+ *
+ * Structure represents interface to JTAG device for jtag sdr xfer
+ * execution.
+ */
+struct jtag_xfer {
+ __u8 type;
+ __u8 direction;
+ __u8 endstate;
+ __u32 length;
+ __u64 tdio;
+};
+
+/* ioctl interface */
+#define __JTAG_IOCTL_MAGIC 0xb2
+
+#define JTAG_IOCRUNTEST _IOW(__JTAG_IOCTL_MAGIC, 0,\
+ struct jtag_run_test_idle)
+#define JTAG_SIOCFREQ _IOW(__JTAG_IOCTL_MAGIC, 1, unsigned int)
+#define JTAG_GIOCFREQ _IOR(__JTAG_IOCTL_MAGIC, 2, unsigned int)
+#define JTAG_IOCXFER _IOWR(__JTAG_IOCTL_MAGIC, 3, struct jtag_xfer)
+#define JTAG_GIOCSTATUS _IOWR(__JTAG_IOCTL_MAGIC, 4, enum jtag_endstate)
+#define JTAG_SIOCMODE _IOW(__JTAG_IOCTL_MAGIC, 5, unsigned int)
+
+#define JTAG_FIRST_MINOR 0
+#define JTAG_MAX_DEVICES 32
+
+#endif /* __UAPI_LINUX_JTAG_H */
--
1.7.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox