* [PATCH v4 07/10] clk: mediatek: Add MT8183 clock support
From: Erin Lo @ 2018-07-31 5:38 UTC (permalink / raw)
To: Matthias Brugger, Rob Herring, Mark Rutland, Thomas Gleixner,
Jason Cooper, Marc Zyngier, Greg Kroah-Hartman, Stephen Boyd
Cc: devicetree, srv_heupstream, linux-kernel, linux-serial,
linux-mediatek, linux-arm-kernel, yingjoe.chen, erin.lo,
mars.cheng, eddie.huang, linux-clk, Weiyi Lu
In-Reply-To: <1533015487-60189-1-git-send-email-erin.lo@mediatek.com>
From: Weiyi Lu <weiyi.lu@mediatek.com>
Add MT8183 clock support, include topckgen, apmixedsys,
infracfg and subsystem clocks.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
drivers/clk/mediatek/Kconfig | 74 ++
drivers/clk/mediatek/Makefile | 12 +
drivers/clk/mediatek/clk-mt8183-audio.c | 112 +++
drivers/clk/mediatek/clk-mt8183-cam.c | 75 ++
drivers/clk/mediatek/clk-mt8183-img.c | 75 ++
drivers/clk/mediatek/clk-mt8183-ipu0.c | 68 ++
drivers/clk/mediatek/clk-mt8183-ipu1.c | 68 ++
drivers/clk/mediatek/clk-mt8183-ipu_adl.c | 66 ++
drivers/clk/mediatek/clk-mt8183-ipu_conn.c | 155 ++++
drivers/clk/mediatek/clk-mt8183-mfgcfg.c | 66 ++
drivers/clk/mediatek/clk-mt8183-mm.c | 128 +++
drivers/clk/mediatek/clk-mt8183-vdec.c | 84 ++
drivers/clk/mediatek/clk-mt8183-venc.c | 71 ++
drivers/clk/mediatek/clk-mt8183.c | 1230 ++++++++++++++++++++++++++++
14 files changed, 2284 insertions(+)
create mode 100644 drivers/clk/mediatek/clk-mt8183-audio.c
create mode 100644 drivers/clk/mediatek/clk-mt8183-cam.c
create mode 100644 drivers/clk/mediatek/clk-mt8183-img.c
create mode 100644 drivers/clk/mediatek/clk-mt8183-ipu0.c
create mode 100644 drivers/clk/mediatek/clk-mt8183-ipu1.c
create mode 100644 drivers/clk/mediatek/clk-mt8183-ipu_adl.c
create mode 100644 drivers/clk/mediatek/clk-mt8183-ipu_conn.c
create mode 100644 drivers/clk/mediatek/clk-mt8183-mfgcfg.c
create mode 100644 drivers/clk/mediatek/clk-mt8183-mm.c
create mode 100644 drivers/clk/mediatek/clk-mt8183-vdec.c
create mode 100644 drivers/clk/mediatek/clk-mt8183-venc.c
create mode 100644 drivers/clk/mediatek/clk-mt8183.c
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 95e5e52..e70c164 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -194,6 +194,80 @@ config COMMON_CLK_MT8173
---help---
This driver supports MediaTek MT8173 clocks.
+config COMMON_CLK_MT8183
+ bool "Clock driver for MediaTek MT8183"
+ depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
+ select COMMON_CLK_MEDIATEK
+ default ARCH_MEDIATEK && ARM64
+ help
+ This driver supports MediaTek MT8183 basic clocks.
+
+config COMMON_CLK_MT8183_AUDIOSYS
+ bool "Clock driver for MediaTek MT8183 audiosys"
+ depends on COMMON_CLK_MT8183
+ help
+ This driver supports MediaTek MT8183 audiosys clocks.
+
+config COMMON_CLK_MT8183_CAMSYS
+ bool "Clock driver for MediaTek MT8183 camsys"
+ depends on COMMON_CLK_MT8183
+ help
+ This driver supports MediaTek MT8183 camsys clocks.
+
+config COMMON_CLK_MT8183_IMGSYS
+ bool "Clock driver for MediaTek MT8183 imgsys"
+ depends on COMMON_CLK_MT8183
+ help
+ This driver supports MediaTek MT8183 imgsys clocks.
+
+config COMMON_CLK_MT8183_IPU_CORE0
+ bool "Clock driver for MediaTek MT8183 ipu_core0"
+ depends on COMMON_CLK_MT8183
+ help
+ This driver supports MediaTek MT8183 ipu_core0 clocks.
+
+config COMMON_CLK_MT8183_IPU_CORE1
+ bool "Clock driver for MediaTek MT8183 ipu_core1"
+ depends on COMMON_CLK_MT8183
+ help
+ This driver supports MediaTek MT8183 ipu_core1 clocks.
+
+config COMMON_CLK_MT8183_IPU_ADL
+ bool "Clock driver for MediaTek MT8183 ipu_adl"
+ depends on COMMON_CLK_MT8183
+ help
+ This driver supports MediaTek MT8183 ipu_adl clocks.
+
+config COMMON_CLK_MT8183_IPU_CONN
+ bool "Clock driver for MediaTek MT8183 ipu_conn"
+ depends on COMMON_CLK_MT8183
+ help
+ This driver supports MediaTek MT8183 ipu_conn clocks.
+
+config COMMON_CLK_MT8183_MFGCFG
+ bool "Clock driver for MediaTek MT8183 mfgcfg"
+ depends on COMMON_CLK_MT8183
+ help
+ This driver supports MediaTek MT8183 mfgcfg clocks.
+
+config COMMON_CLK_MT8183_MMSYS
+ bool "Clock driver for MediaTek MT8183 mmsys"
+ depends on COMMON_CLK_MT8183
+ help
+ This driver supports MediaTek MT8183 mmsys clocks.
+
+config COMMON_CLK_MT8183_VDECSYS
+ bool "Clock driver for MediaTek MT8183 vdecsys"
+ depends on COMMON_CLK_MT8183
+ help
+ This driver supports MediaTek MT8183 vdecsys clocks.
+
+config COMMON_CLK_MT8183_VENCSYS
+ bool "Clock driver for MediaTek MT8183 vencsys"
+ depends on COMMON_CLK_MT8183
+ help
+ This driver supports MediaTek MT8183 vencsys clocks.
+
config COMMON_CLK_MT6765
bool "Clock driver for MediaTek MT6765"
depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index b455a8e..13e6919 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -35,3 +35,15 @@ obj-$(CONFIG_COMMON_CLK_MT7622_HIFSYS) += clk-mt7622-hif.o
obj-$(CONFIG_COMMON_CLK_MT7622_AUDSYS) += clk-mt7622-aud.o
obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o
obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o
+obj-$(CONFIG_COMMON_CLK_MT8183) += clk-mt8183.o
+obj-$(CONFIG_COMMON_CLK_MT8183_AUDIOSYS) += clk-mt8183-audio.o
+obj-$(CONFIG_COMMON_CLK_MT8183_CAMSYS) += clk-mt8183-cam.o
+obj-$(CONFIG_COMMON_CLK_MT8183_IMGSYS) += clk-mt8183-img.o
+obj-$(CONFIG_COMMON_CLK_MT8183_IPU_CORE0) += clk-mt8183-ipu0.o
+obj-$(CONFIG_COMMON_CLK_MT8183_IPU_CORE1) += clk-mt8183-ipu1.o
+obj-$(CONFIG_COMMON_CLK_MT8183_IPU_ADL) += clk-mt8183-ipu_adl.o
+obj-$(CONFIG_COMMON_CLK_MT8183_IPU_CONN) += clk-mt8183-ipu_conn.o
+obj-$(CONFIG_COMMON_CLK_MT8183_MFGCFG) += clk-mt8183-mfgcfg.o
+obj-$(CONFIG_COMMON_CLK_MT8183_MMSYS) += clk-mt8183-mm.o
+obj-$(CONFIG_COMMON_CLK_MT8183_VDECSYS) += clk-mt8183-vdec.o
+obj-$(CONFIG_COMMON_CLK_MT8183_VENCSYS) += clk-mt8183-venc.o
\ No newline at end of file
diff --git a/drivers/clk/mediatek/clk-mt8183-audio.c b/drivers/clk/mediatek/clk-mt8183-audio.c
new file mode 100644
index 0000000..d0443d9
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183-audio.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static const struct mtk_gate_regs audio0_cg_regs = {
+ .set_ofs = 0x0,
+ .clr_ofs = 0x0,
+ .sta_ofs = 0x0,
+};
+
+static const struct mtk_gate_regs audio1_cg_regs = {
+ .set_ofs = 0x4,
+ .clr_ofs = 0x4,
+ .sta_ofs = 0x4,
+};
+
+#define GATE_AUDIO0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &audio0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr, \
+ }
+
+#define GATE_AUDIO1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &audio1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr, \
+ }
+
+static const struct mtk_gate audio_clks[] = {
+ /* AUDIO0 */
+ GATE_AUDIO0(CLK_AUDIO_AFE, "aud_afe", "audio_sel",
+ 2),
+ GATE_AUDIO0(CLK_AUDIO_22M, "aud_22m", "aud_eng1_sel",
+ 8),
+ GATE_AUDIO0(CLK_AUDIO_24M, "aud_24m", "aud_eng2_sel",
+ 9),
+ GATE_AUDIO0(CLK_AUDIO_APLL2_TUNER, "aud_apll2_tuner", "aud_eng2_sel",
+ 18),
+ GATE_AUDIO0(CLK_AUDIO_APLL_TUNER, "aud_apll_tuner", "aud_eng1_sel",
+ 19),
+ GATE_AUDIO0(CLK_AUDIO_TDM, "aud_tdm", "apll12_divb",
+ 20),
+ GATE_AUDIO0(CLK_AUDIO_ADC, "aud_adc", "audio_sel",
+ 24),
+ GATE_AUDIO0(CLK_AUDIO_DAC, "aud_dac", "audio_sel",
+ 25),
+ GATE_AUDIO0(CLK_AUDIO_DAC_PREDIS, "aud_dac_predis", "audio_sel",
+ 26),
+ GATE_AUDIO0(CLK_AUDIO_TML, "aud_tml", "audio_sel",
+ 27),
+ /* AUDIO1 */
+ GATE_AUDIO1(CLK_AUDIO_I2S1, "aud_i2s1", "audio_sel",
+ 4),
+ GATE_AUDIO1(CLK_AUDIO_I2S2, "aud_i2s2", "audio_sel",
+ 5),
+ GATE_AUDIO1(CLK_AUDIO_I2S3, "aud_i2s3", "audio_sel",
+ 6),
+ GATE_AUDIO1(CLK_AUDIO_I2S4, "aud_i2s4", "audio_sel",
+ 7),
+ GATE_AUDIO1(CLK_AUDIO_PDN_ADDA6_ADC, "aud_pdn_adda6_adc", "audio_sel",
+ 20),
+};
+
+static int clk_mt8183_audio_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_AUDIO_NR_CLK);
+
+ mtk_clk_register_gates(node, audio_clks, ARRAY_SIZE(audio_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183_audio[] = {
+ { .compatible = "mediatek,mt8183-audiosys", },
+ {}
+};
+
+static struct platform_driver clk_mt8183_audio_drv = {
+ .probe = clk_mt8183_audio_probe,
+ .driver = {
+ .name = "clk-mt8183-audio",
+ .of_match_table = of_match_clk_mt8183_audio,
+ },
+};
+
+builtin_platform_driver(clk_mt8183_audio_drv);
diff --git a/drivers/clk/mediatek/clk-mt8183-cam.c b/drivers/clk/mediatek/clk-mt8183-cam.c
new file mode 100644
index 0000000..694d2f5
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183-cam.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static const struct mtk_gate_regs cam_cg_regs = {
+ .set_ofs = 0x4,
+ .clr_ofs = 0x8,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_CAM(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &cam_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate cam_clks[] = {
+ GATE_CAM(CLK_CAM_LARB6, "cam_larb6", "cam_sel", 0),
+ GATE_CAM(CLK_CAM_DFP_VAD, "cam_dfp_vad", "cam_sel", 1),
+ GATE_CAM(CLK_CAM_LARB3, "cam_larb3", "cam_sel", 2),
+ GATE_CAM(CLK_CAM_CAM, "cam_cam", "cam_sel", 6),
+ GATE_CAM(CLK_CAM_CAMTG, "cam_camtg", "cam_sel", 7),
+ GATE_CAM(CLK_CAM_SENINF, "cam_seninf", "cam_sel", 8),
+ GATE_CAM(CLK_CAM_CAMSV0, "cam_camsv0", "cam_sel", 9),
+ GATE_CAM(CLK_CAM_CAMSV1, "cam_camsv1", "cam_sel", 10),
+ GATE_CAM(CLK_CAM_CAMSV2, "cam_camsv2", "cam_sel", 11),
+ GATE_CAM(CLK_CAM_CCU, "cam_ccu", "cam_sel", 12),
+};
+
+static int clk_mt8183_cam_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_CAM_NR_CLK);
+
+ mtk_clk_register_gates(node, cam_clks, ARRAY_SIZE(cam_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183_cam[] = {
+ { .compatible = "mediatek,mt8183-camsys", },
+ {}
+};
+
+static struct platform_driver clk_mt8183_cam_drv = {
+ .probe = clk_mt8183_cam_probe,
+ .driver = {
+ .name = "clk-mt8183-cam",
+ .of_match_table = of_match_clk_mt8183_cam,
+ },
+};
+
+builtin_platform_driver(clk_mt8183_cam_drv);
diff --git a/drivers/clk/mediatek/clk-mt8183-img.c b/drivers/clk/mediatek/clk-mt8183-img.c
new file mode 100644
index 0000000..8c24c57
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183-img.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static const struct mtk_gate_regs img_cg_regs = {
+ .set_ofs = 0x4,
+ .clr_ofs = 0x8,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_IMG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &img_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate img_clks[] = {
+ GATE_IMG(CLK_IMG_LARB5, "img_larb5", "img_sel", 0),
+ GATE_IMG(CLK_IMG_LARB2, "img_larb2", "img_sel", 1),
+ GATE_IMG(CLK_IMG_DIP, "img_dip", "img_sel", 2),
+ GATE_IMG(CLK_IMG_FDVT, "img_fdvt", "img_sel", 3),
+ GATE_IMG(CLK_IMG_DPE, "img_dpe", "img_sel", 4),
+ GATE_IMG(CLK_IMG_RSC, "img_rsc", "img_sel", 5),
+ GATE_IMG(CLK_IMG_MFB, "img_mfb", "img_sel", 6),
+ GATE_IMG(CLK_IMG_WPE_A, "img_wpe_a", "img_sel", 7),
+ GATE_IMG(CLK_IMG_WPE_B, "img_wpe_b", "img_sel", 8),
+ GATE_IMG(CLK_IMG_OWE, "img_owe", "img_sel", 9),
+};
+
+static int clk_mt8183_img_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_IMG_NR_CLK);
+
+ mtk_clk_register_gates(node, img_clks, ARRAY_SIZE(img_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183_img[] = {
+ { .compatible = "mediatek,mt8183-imgsys", },
+ {}
+};
+
+static struct platform_driver clk_mt8183_img_drv = {
+ .probe = clk_mt8183_img_probe,
+ .driver = {
+ .name = "clk-mt8183-img",
+ .of_match_table = of_match_clk_mt8183_img,
+ },
+};
+
+builtin_platform_driver(clk_mt8183_img_drv);
diff --git a/drivers/clk/mediatek/clk-mt8183-ipu0.c b/drivers/clk/mediatek/clk-mt8183-ipu0.c
new file mode 100644
index 0000000..49a350c
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183-ipu0.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static const struct mtk_gate_regs ipu_core0_cg_regs = {
+ .set_ofs = 0x4,
+ .clr_ofs = 0x8,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_IPU_CORE0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &ipu_core0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate ipu_core0_clks[] = {
+ GATE_IPU_CORE0(CLK_IPU_CORE0_JTAG, "ipu_core0_jtag", "dsp_sel", 0),
+ GATE_IPU_CORE0(CLK_IPU_CORE0_AXI, "ipu_core0_axi", "dsp_sel", 1),
+ GATE_IPU_CORE0(CLK_IPU_CORE0_IPU, "ipu_core0_ipu", "dsp_sel", 2),
+};
+
+static int clk_mt8183_ipu_core0_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_IPU_CORE0_NR_CLK);
+
+ mtk_clk_register_gates(node, ipu_core0_clks, ARRAY_SIZE(ipu_core0_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183_ipu_core0[] = {
+ { .compatible = "mediatek,mt8183-ipu_core0", },
+ {}
+};
+
+static struct platform_driver clk_mt8183_ipu_core0_drv = {
+ .probe = clk_mt8183_ipu_core0_probe,
+ .driver = {
+ .name = "clk-mt8183-ipu_core0",
+ .of_match_table = of_match_clk_mt8183_ipu_core0,
+ },
+};
+
+builtin_platform_driver(clk_mt8183_ipu_core0_drv);
diff --git a/drivers/clk/mediatek/clk-mt8183-ipu1.c b/drivers/clk/mediatek/clk-mt8183-ipu1.c
new file mode 100644
index 0000000..4d2088e
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183-ipu1.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static const struct mtk_gate_regs ipu_core1_cg_regs = {
+ .set_ofs = 0x4,
+ .clr_ofs = 0x8,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_IPU_CORE1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &ipu_core1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate ipu_core1_clks[] = {
+ GATE_IPU_CORE1(CLK_IPU_CORE1_JTAG, "ipu_core1_jtag", "dsp_sel", 0),
+ GATE_IPU_CORE1(CLK_IPU_CORE1_AXI, "ipu_core1_axi", "dsp_sel", 1),
+ GATE_IPU_CORE1(CLK_IPU_CORE1_IPU, "ipu_core1_ipu", "dsp_sel", 2),
+};
+
+static int clk_mt8183_ipu_core1_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_IPU_CORE1_NR_CLK);
+
+ mtk_clk_register_gates(node, ipu_core1_clks, ARRAY_SIZE(ipu_core1_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183_ipu_core1[] = {
+ { .compatible = "mediatek,mt8183-ipu_core1", },
+ {}
+};
+
+static struct platform_driver clk_mt8183_ipu_core1_drv = {
+ .probe = clk_mt8183_ipu_core1_probe,
+ .driver = {
+ .name = "clk-mt8183-ipu_core1",
+ .of_match_table = of_match_clk_mt8183_ipu_core1,
+ },
+};
+
+builtin_platform_driver(clk_mt8183_ipu_core1_drv);
diff --git a/drivers/clk/mediatek/clk-mt8183-ipu_adl.c b/drivers/clk/mediatek/clk-mt8183-ipu_adl.c
new file mode 100644
index 0000000..93478c0
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183-ipu_adl.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static const struct mtk_gate_regs ipu_adl_cg_regs = {
+ .set_ofs = 0x0,
+ .clr_ofs = 0x0,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_IPU_ADL_I(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &ipu_adl_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
+ }
+
+static const struct mtk_gate ipu_adl_clks[] = {
+ GATE_IPU_ADL_I(CLK_IPU_ADL_CABGEN, "ipu_adl_cabgen", "dsp_sel", 24),
+};
+
+static int clk_mt8183_ipu_adl_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_IPU_ADL_NR_CLK);
+
+ mtk_clk_register_gates(node, ipu_adl_clks, ARRAY_SIZE(ipu_adl_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183_ipu_adl[] = {
+ { .compatible = "mediatek,mt8183-ipu_adl", },
+ {}
+};
+
+static struct platform_driver clk_mt8183_ipu_adl_drv = {
+ .probe = clk_mt8183_ipu_adl_probe,
+ .driver = {
+ .name = "clk-mt8183-ipu_adl",
+ .of_match_table = of_match_clk_mt8183_ipu_adl,
+ },
+};
+
+builtin_platform_driver(clk_mt8183_ipu_adl_drv);
diff --git a/drivers/clk/mediatek/clk-mt8183-ipu_conn.c b/drivers/clk/mediatek/clk-mt8183-ipu_conn.c
new file mode 100644
index 0000000..67f658f
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183-ipu_conn.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static const struct mtk_gate_regs ipu_conn_cg_regs = {
+ .set_ofs = 0x4,
+ .clr_ofs = 0x8,
+ .sta_ofs = 0x0,
+};
+
+static const struct mtk_gate_regs ipu_conn_apb_cg_regs = {
+ .set_ofs = 0x10,
+ .clr_ofs = 0x10,
+ .sta_ofs = 0x10,
+};
+
+static const struct mtk_gate_regs ipu_conn_axi_cg_regs = {
+ .set_ofs = 0x18,
+ .clr_ofs = 0x18,
+ .sta_ofs = 0x18,
+};
+
+static const struct mtk_gate_regs ipu_conn_axi1_cg_regs = {
+ .set_ofs = 0x1c,
+ .clr_ofs = 0x1c,
+ .sta_ofs = 0x1c,
+};
+
+static const struct mtk_gate_regs ipu_conn_axi2_cg_regs = {
+ .set_ofs = 0x20,
+ .clr_ofs = 0x20,
+ .sta_ofs = 0x20,
+};
+
+#define GATE_IPU_CONN(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &ipu_conn_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_IPU_CONN_APB(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &ipu_conn_apb_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr, \
+ }
+
+#define GATE_IPU_CONN_AXI_I(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &ipu_conn_axi_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
+ }
+
+#define GATE_IPU_CONN_AXI1_I(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &ipu_conn_axi1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
+ }
+
+#define GATE_IPU_CONN_AXI2_I(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &ipu_conn_axi2_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
+ }
+
+static const struct mtk_gate ipu_conn_clks[] = {
+ GATE_IPU_CONN(CLK_IPU_CONN_IPU,
+ "ipu_conn_ipu", "dsp_sel", 0),
+ GATE_IPU_CONN(CLK_IPU_CONN_AHB,
+ "ipu_conn_ahb", "dsp_sel", 1),
+ GATE_IPU_CONN(CLK_IPU_CONN_AXI,
+ "ipu_conn_axi", "dsp_sel", 2),
+ GATE_IPU_CONN(CLK_IPU_CONN_ISP,
+ "ipu_conn_isp", "dsp_sel", 3),
+ GATE_IPU_CONN(CLK_IPU_CONN_CAM_ADL,
+ "ipu_conn_cam_adl", "dsp_sel", 4),
+ GATE_IPU_CONN(CLK_IPU_CONN_IMG_ADL,
+ "ipu_conn_img_adl", "dsp_sel", 5),
+ GATE_IPU_CONN_APB(CLK_IPU_CONN_DAP_RX,
+ "ipu_conn_dap_rx", "dsp1_sel", 0),
+ GATE_IPU_CONN_APB(CLK_IPU_CONN_APB2AXI,
+ "ipu_conn_apb2axi", "dsp1_sel", 3),
+ GATE_IPU_CONN_APB(CLK_IPU_CONN_APB2AHB,
+ "ipu_conn_apb2ahb", "dsp1_sel", 20),
+ GATE_IPU_CONN_AXI_I(CLK_IPU_CONN_IPU_CAB1TO2,
+ "ipu_conn_ipu_cab1to2", "dsp1_sel", 6),
+ GATE_IPU_CONN_AXI_I(CLK_IPU_CONN_IPU1_CAB1TO2,
+ "ipu_conn_ipu1_cab1to2", "dsp1_sel", 13),
+ GATE_IPU_CONN_AXI_I(CLK_IPU_CONN_IPU2_CAB1TO2,
+ "ipu_conn_ipu2_cab1to2", "dsp1_sel", 20),
+ GATE_IPU_CONN_AXI1_I(CLK_IPU_CONN_CAB3TO3,
+ "ipu_conn_cab3to3", "dsp1_sel", 0),
+ GATE_IPU_CONN_AXI2_I(CLK_IPU_CONN_CAB2TO1,
+ "ipu_conn_cab2to1", "dsp1_sel", 14),
+ GATE_IPU_CONN_AXI2_I(CLK_IPU_CONN_CAB3TO1_SLICE,
+ "ipu_conn_cab3to1_slice", "dsp1_sel", 17),
+};
+
+static int clk_mt8183_ipu_conn_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_IPU_CONN_NR_CLK);
+
+ mtk_clk_register_gates(node, ipu_conn_clks, ARRAY_SIZE(ipu_conn_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183_ipu_conn[] = {
+ { .compatible = "mediatek,mt8183-ipu_conn", },
+ {}
+};
+
+static struct platform_driver clk_mt8183_ipu_conn_drv = {
+ .probe = clk_mt8183_ipu_conn_probe,
+ .driver = {
+ .name = "clk-mt8183-ipu_conn",
+ .of_match_table = of_match_clk_mt8183_ipu_conn,
+ },
+};
+
+builtin_platform_driver(clk_mt8183_ipu_conn_drv);
diff --git a/drivers/clk/mediatek/clk-mt8183-mfgcfg.c b/drivers/clk/mediatek/clk-mt8183-mfgcfg.c
new file mode 100644
index 0000000..4618573
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183-mfgcfg.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static const struct mtk_gate_regs mfg_cg_regs = {
+ .set_ofs = 0x4,
+ .clr_ofs = 0x8,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_MFG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &mfg_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate mfg_clks[] = {
+ GATE_MFG(CLK_MFG_BG3D, "mfg_bg3d", "mfg_sel", 0)
+};
+
+static int clk_mt8183_mfg_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_MFG_NR_CLK);
+
+ mtk_clk_register_gates(node, mfg_clks, ARRAY_SIZE(mfg_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183_mfg[] = {
+ { .compatible = "mediatek,mt8183-mfgcfg", },
+ {}
+};
+
+static struct platform_driver clk_mt8183_mfg_drv = {
+ .probe = clk_mt8183_mfg_probe,
+ .driver = {
+ .name = "clk-mt8183-mfg",
+ .of_match_table = of_match_clk_mt8183_mfg,
+ },
+};
+
+builtin_platform_driver(clk_mt8183_mfg_drv);
diff --git a/drivers/clk/mediatek/clk-mt8183-mm.c b/drivers/clk/mediatek/clk-mt8183-mm.c
new file mode 100644
index 0000000..444b304
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183-mm.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static const struct mtk_gate_regs mm0_cg_regs = {
+ .set_ofs = 0x104,
+ .clr_ofs = 0x108,
+ .sta_ofs = 0x100,
+};
+
+static const struct mtk_gate_regs mm1_cg_regs = {
+ .set_ofs = 0x114,
+ .clr_ofs = 0x118,
+ .sta_ofs = 0x110,
+};
+
+#define GATE_MM0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &mm0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_MM1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &mm1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate mm_clks[] = {
+ /* MM0 */
+ GATE_MM0(CLK_MM_SMI_COMMON, "mm_smi_common", "mm_sel", 0),
+ GATE_MM0(CLK_MM_SMI_LARB0, "mm_smi_larb0", "mm_sel", 1),
+ GATE_MM0(CLK_MM_SMI_LARB1, "mm_smi_larb1", "mm_sel", 2),
+ GATE_MM0(CLK_MM_GALS_COMM0, "mm_gals_comm0", "mm_sel", 3),
+ GATE_MM0(CLK_MM_GALS_COMM1, "mm_gals_comm1", "mm_sel", 4),
+ GATE_MM0(CLK_MM_GALS_CCU2MM, "mm_gals_ccu2mm", "mm_sel", 5),
+ GATE_MM0(CLK_MM_GALS_IPU12MM, "mm_gals_ipu12mm", "mm_sel", 6),
+ GATE_MM0(CLK_MM_GALS_IMG2MM, "mm_gals_img2mm", "mm_sel", 7),
+ GATE_MM0(CLK_MM_GALS_CAM2MM, "mm_gals_cam2mm", "mm_sel", 8),
+ GATE_MM0(CLK_MM_GALS_IPU2MM, "mm_gals_ipu2mm", "mm_sel", 9),
+ GATE_MM0(CLK_MM_MDP_DL_TXCK, "mm_mdp_dl_txck", "mm_sel", 10),
+ GATE_MM0(CLK_MM_IPU_DL_TXCK, "mm_ipu_dl_txck", "mm_sel", 11),
+ GATE_MM0(CLK_MM_MDP_RDMA0, "mm_mdp_rdma0", "mm_sel", 12),
+ GATE_MM0(CLK_MM_MDP_RDMA1, "mm_mdp_rdma1", "mm_sel", 13),
+ GATE_MM0(CLK_MM_MDP_RSZ0, "mm_mdp_rsz0", "mm_sel", 14),
+ GATE_MM0(CLK_MM_MDP_RSZ1, "mm_mdp_rsz1", "mm_sel", 15),
+ GATE_MM0(CLK_MM_MDP_TDSHP, "mm_mdp_tdshp", "mm_sel", 16),
+ GATE_MM0(CLK_MM_MDP_WROT0, "mm_mdp_wrot0", "mm_sel", 17),
+ GATE_MM0(CLK_MM_MDP_WDMA0, "mm_mdp_wdma0", "mm_sel", 18),
+ GATE_MM0(CLK_MM_FAKE_ENG, "mm_fake_eng", "mm_sel", 19),
+ GATE_MM0(CLK_MM_DISP_OVL0, "mm_disp_ovl0", "mm_sel", 20),
+ GATE_MM0(CLK_MM_DISP_OVL0_2L, "mm_disp_ovl0_2l", "mm_sel", 21),
+ GATE_MM0(CLK_MM_DISP_OVL1_2L, "mm_disp_ovl1_2l", "mm_sel", 22),
+ GATE_MM0(CLK_MM_DISP_RDMA0, "mm_disp_rdma0", "mm_sel", 23),
+ GATE_MM0(CLK_MM_DISP_RDMA1, "mm_disp_rdma1", "mm_sel", 24),
+ GATE_MM0(CLK_MM_DISP_WDMA0, "mm_disp_wdma0", "mm_sel", 25),
+ GATE_MM0(CLK_MM_DISP_COLOR0, "mm_disp_color0", "mm_sel", 26),
+ GATE_MM0(CLK_MM_DISP_CCORR0, "mm_disp_ccorr0", "mm_sel", 27),
+ GATE_MM0(CLK_MM_DISP_AAL0, "mm_disp_aal0", "mm_sel", 28),
+ GATE_MM0(CLK_MM_DISP_GAMMA0, "mm_disp_gamma0", "mm_sel", 29),
+ GATE_MM0(CLK_MM_DISP_DITHER0, "mm_disp_dither0", "mm_sel", 30),
+ GATE_MM0(CLK_MM_DISP_SPLIT, "mm_disp_split", "mm_sel", 31),
+ /* MM1 */
+ GATE_MM1(CLK_MM_DSI0_MM, "mm_dsi0_mm", "mm_sel", 0),
+ GATE_MM1(CLK_MM_DSI0_IF, "mm_dsi0_if", "mm_sel", 1),
+ GATE_MM1(CLK_MM_DPI_MM, "mm_dpi_mm", "mm_sel", 2),
+ GATE_MM1(CLK_MM_DPI_IF, "mm_dpi_if", "dpi0_sel", 3),
+ GATE_MM1(CLK_MM_FAKE_ENG2, "mm_fake_eng2", "mm_sel", 4),
+ GATE_MM1(CLK_MM_MDP_DL_RX, "mm_mdp_dl_rx", "mm_sel", 5),
+ GATE_MM1(CLK_MM_IPU_DL_RX, "mm_ipu_dl_rx", "mm_sel", 6),
+ GATE_MM1(CLK_MM_26M, "mm_26m", "f_f26m_ck", 7),
+ GATE_MM1(CLK_MM_MMSYS_R2Y, "mm_mmsys_r2y", "mm_sel", 8),
+ GATE_MM1(CLK_MM_DISP_RSZ, "mm_disp_rsz", "mm_sel", 9),
+ GATE_MM1(CLK_MM_MDP_AAL, "mm_mdp_aal", "mm_sel", 10),
+ GATE_MM1(CLK_MM_MDP_CCORR, "mm_mdp_ccorr", "mm_sel", 11),
+ GATE_MM1(CLK_MM_DBI_MM, "mm_dbi_mm", "mm_sel", 12),
+ GATE_MM1(CLK_MM_DBI_IF, "mm_dbi_if", "dpi0_sel", 13),
+};
+
+static int clk_mt8183_mm_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_MM_NR_CLK);
+
+ mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183_mm[] = {
+ { .compatible = "mediatek,mt8183-mmsys", },
+ {}
+};
+
+static struct platform_driver clk_mt8183_mm_drv = {
+ .probe = clk_mt8183_mm_probe,
+ .driver = {
+ .name = "clk-mt8183-mm",
+ .of_match_table = of_match_clk_mt8183_mm,
+ },
+};
+
+builtin_platform_driver(clk_mt8183_mm_drv);
diff --git a/drivers/clk/mediatek/clk-mt8183-vdec.c b/drivers/clk/mediatek/clk-mt8183-vdec.c
new file mode 100644
index 0000000..077b317
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183-vdec.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static const struct mtk_gate_regs vdec0_cg_regs = {
+ .set_ofs = 0x0,
+ .clr_ofs = 0x4,
+ .sta_ofs = 0x0,
+};
+
+static const struct mtk_gate_regs vdec1_cg_regs = {
+ .set_ofs = 0x8,
+ .clr_ofs = 0xc,
+ .sta_ofs = 0x8,
+};
+
+#define GATE_VDEC0_I(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &vdec0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+#define GATE_VDEC1_I(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &vdec1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+static const struct mtk_gate vdec_clks[] = {
+ /* VDEC0 */
+ GATE_VDEC0_I(CLK_VDEC_VDEC, "vdec_vdec", "mm_sel", 0),
+ /* VDEC1 */
+ GATE_VDEC1_I(CLK_VDEC_LARB1, "vdec_larb1", "mm_sel", 0),
+};
+
+static int clk_mt8183_vdec_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_VDEC_NR_CLK);
+
+ mtk_clk_register_gates(node, vdec_clks, ARRAY_SIZE(vdec_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183_vdec[] = {
+ { .compatible = "mediatek,mt8183-vdecsys", },
+ {}
+};
+
+static struct platform_driver clk_mt8183_vdec_drv = {
+ .probe = clk_mt8183_vdec_probe,
+ .driver = {
+ .name = "clk-mt8183-vdec",
+ .of_match_table = of_match_clk_mt8183_vdec,
+ },
+};
+
+builtin_platform_driver(clk_mt8183_vdec_drv);
diff --git a/drivers/clk/mediatek/clk-mt8183-venc.c b/drivers/clk/mediatek/clk-mt8183-venc.c
new file mode 100644
index 0000000..b24e713
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183-venc.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static const struct mtk_gate_regs venc_cg_regs = {
+ .set_ofs = 0x4,
+ .clr_ofs = 0x8,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_VENC_I(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &venc_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+static const struct mtk_gate venc_clks[] = {
+ GATE_VENC_I(CLK_VENC_LARB, "venc_larb",
+ "mm_sel", 0),
+ GATE_VENC_I(CLK_VENC_VENC, "venc_venc",
+ "mm_sel", 4),
+ GATE_VENC_I(CLK_VENC_JPGENC, "venc_jpgenc",
+ "mm_sel", 8),
+};
+
+static int clk_mt8183_venc_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_VENC_NR_CLK);
+
+ mtk_clk_register_gates(node, venc_clks, ARRAY_SIZE(venc_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183_venc[] = {
+ { .compatible = "mediatek,mt8183-vencsys", },
+ {}
+};
+
+static struct platform_driver clk_mt8183_venc_drv = {
+ .probe = clk_mt8183_venc_probe,
+ .driver = {
+ .name = "clk-mt8183-venc",
+ .of_match_table = of_match_clk_mt8183_venc,
+ },
+};
+
+builtin_platform_driver(clk_mt8183_venc_drv);
diff --git a/drivers/clk/mediatek/clk-mt8183.c b/drivers/clk/mediatek/clk-mt8183.c
new file mode 100644
index 0000000..0819ac3
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8183.c
@@ -0,0 +1,1230 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2018 MediaTek Inc.
+// Author: Weiyi Lu <weiyi.lu@mediatek.com>
+
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk-mtk.h"
+#include "clk-mux.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt8183-clk.h>
+
+static DEFINE_SPINLOCK(mt8183_clk_lock);
+
+static const struct mtk_fixed_clk top_fixed_clks[] = {
+ FIXED_CLK(CLK_TOP_CLK26M, "f_f26m_ck", "clk26m", 26000000),
+ FIXED_CLK(CLK_TOP_ULPOSC, "osc", NULL, 250000),
+ FIXED_CLK(CLK_TOP_UNIVP_192M, "univpll_192m", "univpll", 192000000),
+};
+
+static const struct mtk_fixed_factor top_divs[] = {
+ FACTOR(CLK_TOP_CLK13M, "clk13m", "clk26m", 1,
+ 2),
+ FACTOR(CLK_TOP_F26M_CK_D2, "csw_f26m_ck_d2", "clk26m", 1,
+ 2),
+ FACTOR(CLK_TOP_SYSPLL_CK, "syspll_ck", "mainpll", 1,
+ 1),
+ FACTOR(CLK_TOP_SYSPLL_D2, "syspll_d2", "syspll_ck", 1,
+ 2),
+ FACTOR(CLK_TOP_SYSPLL_D2_D2, "syspll_d2_d2", "syspll_d2", 1,
+ 2),
+ FACTOR(CLK_TOP_SYSPLL_D2_D4, "syspll_d2_d4", "syspll_d2", 1,
+ 4),
+ FACTOR(CLK_TOP_SYSPLL_D2_D8, "syspll_d2_d8", "syspll_d2", 1,
+ 8),
+ FACTOR(CLK_TOP_SYSPLL_D2_D16, "syspll_d2_d16", "syspll_d2", 1,
+ 16),
+ FACTOR(CLK_TOP_SYSPLL_D3, "syspll_d3", "mainpll", 1,
+ 3),
+ FACTOR(CLK_TOP_SYSPLL_D3_D2, "syspll_d3_d2", "syspll_d3", 1,
+ 2),
+ FACTOR(CLK_TOP_SYSPLL_D3_D4, "syspll_d3_d4", "syspll_d3", 1,
+ 4),
+ FACTOR(CLK_TOP_SYSPLL_D3_D8, "syspll_d3_d8", "syspll_d3", 1,
+ 8),
+ FACTOR(CLK_TOP_SYSPLL_D5, "syspll_d5", "mainpll", 1,
+ 5),
+ FACTOR(CLK_TOP_SYSPLL_D5_D2, "syspll_d5_d2", "syspll_d5", 1,
+ 2),
+ FACTOR(CLK_TOP_SYSPLL_D5_D4, "syspll_d5_d4", "syspll_d5", 1,
+ 4),
+ FACTOR(CLK_TOP_SYSPLL_D7, "syspll_d7", "mainpll", 1,
+ 7),
+ FACTOR(CLK_TOP_SYSPLL_D7_D2, "syspll_d7_d2", "syspll_d7", 1,
+ 2),
+ FACTOR(CLK_TOP_SYSPLL_D7_D4, "syspll_d7_d4", "syspll_d7", 1,
+ 4),
+ FACTOR(CLK_TOP_UNIVPLL_CK, "univpll_ck", "univpll", 1,
+ 1),
+ FACTOR(CLK_TOP_UNIVPLL_D2, "univpll_d2", "univpll_ck", 1,
+ 2),
+ FACTOR(CLK_TOP_UNIVPLL_D2_D2, "univpll_d2_d2", "univpll_d2", 1,
+ 2),
+ FACTOR(CLK_TOP_UNIVPLL_D2_D4, "univpll_d2_d4", "univpll_d2", 1,
+ 4),
+ FACTOR(CLK_TOP_UNIVPLL_D2_D8, "univpll_d2_d8", "univpll_d2", 1,
+ 8),
+ FACTOR(CLK_TOP_UNIVPLL_D3, "univpll_d3", "univpll", 1,
+ 3),
+ FACTOR(CLK_TOP_UNIVPLL_D3_D2, "univpll_d3_d2", "univpll_d3", 1,
+ 2),
+ FACTOR(CLK_TOP_UNIVPLL_D3_D4, "univpll_d3_d4", "univpll_d3", 1,
+ 4),
+ FACTOR(CLK_TOP_UNIVPLL_D3_D8, "univpll_d3_d8", "univpll_d3", 1,
+ 8),
+ FACTOR(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univpll", 1,
+ 5),
+ FACTOR(CLK_TOP_UNIVPLL_D5_D2, "univpll_d5_d2", "univpll_d5", 1,
+ 2),
+ FACTOR(CLK_TOP_UNIVPLL_D5_D4, "univpll_d5_d4", "univpll_d5", 1,
+ 4),
+ FACTOR(CLK_TOP_UNIVPLL_D5_D8, "univpll_d5_d8", "univpll_d5", 1,
+ 8),
+ FACTOR(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univpll", 1,
+ 7),
+ FACTOR(CLK_TOP_UNIVP_192M_CK, "univ_192m_ck", "univpll_192m", 1,
+ 1),
+ FACTOR(CLK_TOP_UNIVP_192M_D2, "univ_192m_d2", "univ_192m_ck", 1,
+ 2),
+ FACTOR(CLK_TOP_UNIVP_192M_D4, "univ_192m_d4", "univ_192m_ck", 1,
+ 4),
+ FACTOR(CLK_TOP_UNIVP_192M_D8, "univ_192m_d8", "univ_192m_ck", 1,
+ 8),
+ FACTOR(CLK_TOP_UNIVP_192M_D16, "univ_192m_d16", "univ_192m_ck", 1,
+ 16),
+ FACTOR(CLK_TOP_UNIVP_192M_D32, "univ_192m_d32", "univ_192m_ck", 1,
+ 32),
+ FACTOR(CLK_TOP_APLL1_CK, "apll1_ck", "apll1", 1,
+ 1),
+ FACTOR(CLK_TOP_APLL1_D2, "apll1_d2", "apll1", 1,
+ 2),
+ FACTOR(CLK_TOP_APLL1_D4, "apll1_d4", "apll1", 1,
+ 4),
+ FACTOR(CLK_TOP_APLL1_D8, "apll1_d8", "apll1", 1,
+ 8),
+ FACTOR(CLK_TOP_APLL2_CK, "apll2_ck", "apll2", 1,
+ 1),
+ FACTOR(CLK_TOP_APLL2_D2, "apll2_d2", "apll2", 1,
+ 2),
+ FACTOR(CLK_TOP_APLL2_D4, "apll2_d4", "apll2", 1,
+ 4),
+ FACTOR(CLK_TOP_APLL2_D8, "apll2_d8", "apll2", 1,
+ 8),
+ FACTOR(CLK_TOP_TVDPLL_CK, "tvdpll_ck", "tvdpll", 1,
+ 1),
+ FACTOR(CLK_TOP_TVDPLL_D2, "tvdpll_d2", "tvdpll_ck", 1,
+ 2),
+ FACTOR(CLK_TOP_TVDPLL_D4, "tvdpll_d4", "tvdpll", 1,
+ 4),
+ FACTOR(CLK_TOP_TVDPLL_D8, "tvdpll_d8", "tvdpll", 1,
+ 8),
+ FACTOR(CLK_TOP_TVDPLL_D16, "tvdpll_d16", "tvdpll", 1,
+ 16),
+ FACTOR(CLK_TOP_MMPLL_CK, "mmpll_ck", "mmpll", 1,
+ 1),
+ FACTOR(CLK_TOP_MMPLL_D4, "mmpll_d4", "mmpll", 1,
+ 4),
+ FACTOR(CLK_TOP_MMPLL_D4_D2, "mmpll_d4_d2", "mmpll_d4", 1,
+ 2),
+ FACTOR(CLK_TOP_MMPLL_D4_D4, "mmpll_d4_d4", "mmpll_d4", 1,
+ 4),
+ FACTOR(CLK_TOP_MMPLL_D5, "mmpll_d5", "mmpll", 1,
+ 5),
+ FACTOR(CLK_TOP_MMPLL_D5_D2, "mmpll_d5_d2", "mmpll_d5", 1,
+ 2),
+ FACTOR(CLK_TOP_MMPLL_D5_D4, "mmpll_d5_d4", "mmpll_d5", 1,
+ 4),
+ FACTOR(CLK_TOP_MMPLL_D6, "mmpll_d6", "mmpll", 1,
+ 6),
+ FACTOR(CLK_TOP_MMPLL_D7, "mmpll_d7", "mmpll", 1,
+ 7),
+ FACTOR(CLK_TOP_MFGPLL_CK, "mfgpll_ck", "mfgpll", 1,
+ 1),
+ FACTOR(CLK_TOP_MSDCPLL_CK, "msdcpll_ck", "msdcpll", 1,
+ 1),
+ FACTOR(CLK_TOP_MSDCPLL_D2, "msdcpll_d2", "msdcpll", 1,
+ 2),
+ FACTOR(CLK_TOP_MSDCPLL_D4, "msdcpll_d4", "msdcpll", 1,
+ 4),
+ FACTOR(CLK_TOP_MSDCPLL_D8, "msdcpll_d8", "msdcpll", 1,
+ 8),
+ FACTOR(CLK_TOP_MSDCPLL_D16, "msdcpll_d16", "msdcpll", 1,
+ 16),
+ FACTOR(CLK_TOP_AD_OSC_CK, "ad_osc_ck", "osc", 1,
+ 1),
+ FACTOR(CLK_TOP_OSC_D2, "osc_d2", "osc", 1,
+ 2),
+ FACTOR(CLK_TOP_OSC_D4, "osc_d4", "osc", 1,
+ 4),
+ FACTOR(CLK_TOP_OSC_D8, "osc_d8", "osc", 1,
+ 8),
+ FACTOR(CLK_TOP_OSC_D16, "osc_d16", "osc", 1,
+ 16),
+ FACTOR(CLK_TOP_UNIVPLL, "univpll", "univ2pll", 1,
+ 2),
+};
+
+static const char * const axi_parents[] = {
+ "clk26m",
+ "syspll_d2_d4",
+ "syspll_d7",
+ "osc_d4"
+};
+
+static const char * const mm_parents[] = {
+ "clk26m",
+ "mmpll_d7",
+ "syspll_d3",
+ "univpll_d2_d2",
+ "syspll_d2_d2",
+ "syspll_d3_d2"
+};
+
+static const char * const img_parents[] = {
+ "clk26m",
+ "mmpll_d6",
+ "univpll_d3",
+ "syspll_d3",
+ "univpll_d2_d2",
+ "syspll_d2_d2",
+ "univpll_d3_d2",
+ "syspll_d3_d2"
+};
+
+static const char * const cam_parents[] = {
+ "clk26m",
+ "syspll_d2",
+ "mmpll_d6",
+ "syspll_d3",
+ "mmpll_d7",
+ "univpll_d3",
+ "univpll_d2_d2",
+ "syspll_d2_d2",
+ "syspll_d3_d2",
+ "univpll_d3_d2"
+};
+
+static const char * const dsp_parents[] = {
+ "clk26m",
+ "mmpll_d6",
+ "mmpll_d7",
+ "univpll_d3",
+ "syspll_d3",
+ "univpll_d2_d2",
+ "syspll_d2_d2",
+ "univpll_d3_d2",
+ "syspll_d3_d2"
+};
+
+static const char * const dsp1_parents[] = {
+ "clk26m",
+ "mmpll_d6",
+ "mmpll_d7",
+ "univpll_d3",
+ "syspll_d3",
+ "univpll_d2_d2",
+ "syspll_d2_d2",
+ "univpll_d3_d2",
+ "syspll_d3_d2"
+};
+
+static const char * const dsp2_parents[] = {
+ "clk26m",
+ "mmpll_d6",
+ "mmpll_d7",
+ "univpll_d3",
+ "syspll_d3",
+ "univpll_d2_d2",
+ "syspll_d2_d2",
+ "univpll_d3_d2",
+ "syspll_d3_d2"
+};
+
+static const char * const ipu_if_parents[] = {
+ "clk26m",
+ "mmpll_d6",
+ "mmpll_d7",
+ "univpll_d3",
+ "syspll_d3",
+ "univpll_d2_d2",
+ "syspll_d2_d2",
+ "univpll_d3_d2",
+ "syspll_d3_d2"
+};
+
+static const char * const mfg_parents[] = {
+ "clk26m",
+ "mfgpll_ck",
+ "univpll_d3",
+ "syspll_d3"
+};
+
+static const char * const f52m_mfg_parents[] = {
+ "clk26m",
+ "univpll_d3_d2",
+ "univpll_d3_d4",
+ "univpll_d3_d8"
+};
+
+static const char * const camtg_parents[] = {
+ "clk26m",
+ "univ_192m_d8",
+ "univpll_d3_d8",
+ "univ_192m_d4",
+ "univpll_d3_d16",
+ "csw_f26m_ck_d2",
+ "univ_192m_d16",
+ "univ_192m_d32"
+};
+
+static const char * const camtg2_parents[] = {
+ "clk26m",
+ "univ_192m_d8",
+ "univpll_d3_d8",
+ "univ_192m_d4",
+ "univpll_d3_d16",
+ "csw_f26m_ck_d2",
+ "univ_192m_d16",
+ "univ_192m_d32"
+};
+
+static const char * const camtg3_parents[] = {
+ "clk26m",
+ "univ_192m_d8",
+ "univpll_d3_d8",
+ "univ_192m_d4",
+ "univpll_d3_d16",
+ "csw_f26m_ck_d2",
+ "univ_192m_d16",
+ "univ_192m_d32"
+};
+
+static const char * const camtg4_parents[] = {
+ "clk26m",
+ "univ_192m_d8",
+ "univpll_d3_d8",
+ "univ_192m_d4",
+ "univpll_d3_d16",
+ "csw_f26m_ck_d2",
+ "univ_192m_d16",
+ "univ_192m_d32"
+};
+
+static const char * const uart_parents[] = {
+ "clk26m",
+ "univpll_d3_d8"
+};
+
+static const char * const spi_parents[] = {
+ "clk26m",
+ "syspll_d5_d2",
+ "syspll_d3_d4",
+ "msdcpll_d4"
+};
+
+static const char * const msdc50_hclk_parents[] = {
+ "clk26m",
+ "syspll_d2_d2",
+ "syspll_d3_d2"
+};
+
+static const char * const msdc50_0_parents[] = {
+ "clk26m",
+ "msdcpll_ck",
+ "msdcpll_d2",
+ "univpll_d2_d4",
+ "syspll_d3_d2",
+ "univpll_d2_d2"
+};
+
+static const char * const msdc30_1_parents[] = {
+ "clk26m",
+ "univpll_d3_d2",
+ "syspll_d3_d2",
+ "syspll_d7",
+ "msdcpll_d2"
+};
+
+static const char * const msdc30_2_parents[] = {
+ "clk26m",
+ "univpll_d3_d2",
+ "syspll_d3_d2",
+ "syspll_d7",
+ "msdcpll_d2"
+};
+
+static const char * const audio_parents[] = {
+ "clk26m",
+ "syspll_d5_d4",
+ "syspll_d7_d4",
+ "syspll_d2_d16"
+};
+
+static const char * const aud_intbus_parents[] = {
+ "clk26m",
+ "syspll_d2_d4",
+ "syspll_d7_d2"
+};
+
+static const char * const pmicspi_parents[] = {
+ "clk26m",
+ "syspll_d2_d8",
+ "osc_d8"
+};
+
+static const char * const fpwrap_ulposc_parents[] = {
+ "clk26m",
+ "osc_d16",
+ "osc_d4",
+ "osc_d8"
+};
+
+static const char * const atb_parents[] = {
+ "clk26m",
+ "syspll_d2_d2",
+ "syspll_d5"
+};
+
+static const char * const sspm_parents[] = {
+ "clk26m",
+ "univpll_d2_d4",
+ "syspll_d2_d2",
+ "univpll_d2_d2",
+ "syspll_d3"
+};
+
+static const char * const dpi0_parents[] = {
+ "clk26m",
+ "tvdpll_d2",
+ "tvdpll_d4",
+ "tvdpll_d8",
+ "tvdpll_d16",
+ "univpll_d5_d2",
+ "univpll_d3_d4",
+ "syspll_d3_d4",
+ "univpll_d3_d8"
+};
+
+static const char * const scam_parents[] = {
+ "clk26m",
+ "syspll_d5_d2"
+};
+
+static const char * const disppwm_parents[] = {
+ "clk26m",
+ "univpll_d3_d4",
+ "osc_d2",
+ "osc_d4",
+ "osc_d16"
+};
+
+static const char * const usb_top_parents[] = {
+ "clk26m",
+ "univpll_d5_d4",
+ "univpll_d3_d4",
+ "univpll_d5_d2"
+};
+
+
+static const char * const ssusb_top_xhci_parents[] = {
+ "clk26m",
+ "univpll_d5_d4",
+ "univpll_d3_d4",
+ "univpll_d5_d2"
+};
+
+static const char * const spm_parents[] = {
+ "clk26m",
+ "syspll_d2_d8"
+};
+
+static const char * const i2c_parents[] = {
+ "clk26m",
+ "syspll_d2_d8",
+ "univpll_d5_d2"
+};
+
+static const char * const scp_parents[] = {
+ "clk26m",
+ "univpll_d2_d8",
+ "syspll_d5",
+ "syspll_d2_d2",
+ "univpll_d2_d2",
+ "syspll_d3",
+ "univpll_d3"
+};
+
+static const char * const seninf_parents[] = {
+ "clk26m",
+ "univpll_d2_d2",
+ "univpll_d3_d2",
+ "univpll_d2_d4"
+};
+
+static const char * const dxcc_parents[] = {
+ "clk26m",
+ "syspll_d2_d2",
+ "syspll_d2_d4",
+ "syspll_d2_d8"
+};
+
+static const char * const aud_engen1_parents[] = {
+ "clk26m",
+ "apll1_d2",
+ "apll1_d4",
+ "apll1_d8"
+};
+
+static const char * const aud_engen2_parents[] = {
+ "clk26m",
+ "apll2_d2",
+ "apll2_d4",
+ "apll2_d8"
+};
+
+static const char * const faes_ufsfde_parents[] = {
+ "clk26m",
+ "syspll_d2",
+ "syspll_d2_d2",
+ "syspll_d3",
+ "syspll_d2_d4",
+ "univpll_d3"
+};
+
+static const char * const fufs_parents[] = {
+ "clk26m",
+ "syspll_d2_d4",
+ "syspll_d2_d8",
+ "syspll_d2_d16"
+};
+
+static const char * const aud_1_parents[] = {
+ "clk26m",
+ "apll1_ck"
+};
+
+static const char * const aud_2_parents[] = {
+ "clk26m",
+ "apll2_ck"
+};
+
+static const struct mtk_mux top_muxes[] = {
+ /* CLK_CFG_0 */
+ MUX_CLR_SET_UPD_FLAGS(CLK_TOP_MUX_AXI, "axi_sel",
+ axi_parents, 0x40,
+ 0x44, 0x48, 0, 2, 7, 0x004, 0, CLK_IS_CRITICAL),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_MM, "mm_sel",
+ mm_parents, 0x40,
+ 0x44, 0x48, 8, 3, 15, 0x004, 1),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_IMG, "img_sel",
+ img_parents, 0x40,
+ 0x44, 0x48, 16, 3, 23, 0x004, 2),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_CAM, "cam_sel",
+ cam_parents, 0x40,
+ 0x44, 0x48, 24, 4, 31, 0x004, 3),
+ /* CLK_CFG_1 */
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_DSP, "dsp_sel",
+ dsp_parents, 0x50,
+ 0x54, 0x58, 0, 4, 7, 0x004, 4),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_DSP1, "dsp1_sel",
+ dsp1_parents, 0x50,
+ 0x54, 0x58, 8, 4, 15, 0x004, 5),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_DSP2, "dsp2_sel",
+ dsp2_parents, 0x50,
+ 0x54, 0x58, 16, 4, 23, 0x004, 6),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_IPU_IF, "ipu_if_sel",
+ ipu_if_parents, 0x50,
+ 0x54, 0x58, 24, 4, 31, 0x004, 7),
+ /* CLK_CFG_2 */
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_MFG, "mfg_sel",
+ mfg_parents, 0x60,
+ 0x64, 0x68, 0, 2, 7, 0x004, 8),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_F52M_MFG, "f52m_mfg_sel",
+ f52m_mfg_parents, 0x60,
+ 0x64, 0x68, 8, 2, 15, 0x004, 9),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_CAMTG, "camtg_sel",
+ camtg_parents, 0x60,
+ 0x64, 0x68, 16, 3, 23, 0x004, 10),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_CAMTG2, "camtg2_sel",
+ camtg2_parents, 0x60,
+ 0x64, 0x68, 24, 3, 31, 0x004, 11),
+ /* CLK_CFG_3 */
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_CAMTG3, "camtg3_sel",
+ camtg3_parents, 0x70,
+ 0x74, 0x78, 0, 3, 7, 0x004, 12),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_CAMTG4, "camtg4_sel",
+ camtg4_parents, 0x70,
+ 0x74, 0x78, 8, 3, 15, 0x004, 13),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_UART, "uart_sel",
+ uart_parents, 0x70,
+ 0x74, 0x78, 16, 1, 23, 0x004, 14),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_SPI, "spi_sel",
+ spi_parents, 0x70,
+ 0x74, 0x78, 24, 2, 31, 0x004, 15),
+ /* CLK_CFG_4 */
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_MSDC50_0_HCLK, "msdc50_hclk_sel",
+ msdc50_hclk_parents, 0x80,
+ 0x84, 0x88, 0, 2, 7, 0x004, 16),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_MSDC50_0, "msdc50_0_sel",
+ msdc50_0_parents, 0x80,
+ 0x84, 0x88, 8, 3, 15, 0x004, 17),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_MSDC30_1, "msdc30_1_sel",
+ msdc30_1_parents, 0x80,
+ 0x84, 0x88, 16, 3, 23, 0x004, 18),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_MSDC30_2, "msdc30_2_sel",
+ msdc30_2_parents, 0x80,
+ 0x84, 0x88, 24, 3, 31, 0x004, 19),
+ /* CLK_CFG_5 */
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_AUDIO, "audio_sel",
+ audio_parents, 0x90,
+ 0x94, 0x98, 0, 2, 7, 0x004, 20),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_AUD_INTBUS, "aud_intbus_sel",
+ aud_intbus_parents, 0x90,
+ 0x94, 0x98, 8, 2, 15, 0x004, 21),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_PMICSPI, "pmicspi_sel",
+ pmicspi_parents, 0x90,
+ 0x94, 0x98, 16, 2, 23, 0x004, 22),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_FPWRAP_ULPOSC, "fpwrap_ulposc_sel",
+ fpwrap_ulposc_parents, 0x90,
+ 0x94, 0x98, 24, 2, 31, 0x004, 23),
+ /* CLK_CFG_6 */
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_ATB, "atb_sel",
+ atb_parents, 0xa0,
+ 0xa4, 0xa8, 0, 2, 7, 0x004, 24),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_SSPM, "sspm_sel",
+ sspm_parents, 0xa0,
+ 0xa4, 0xa8, 8, 3, 15, 0x004, 25),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_DPI0, "dpi0_sel",
+ dpi0_parents, 0xa0,
+ 0xa4, 0xa8, 16, 4, 23, 0x004, 26),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_SCAM, "scam_sel",
+ scam_parents, 0xa0,
+ 0xa4, 0xa8, 24, 1, 31, 0x004, 27),
+ /* CLK_CFG_7 */
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_DISP_PWM, "disppwm_sel",
+ disppwm_parents, 0xb0,
+ 0xb4, 0xb8, 0, 3, 7, 0x004, 28),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_USB_TOP, "usb_top_sel",
+ usb_top_parents, 0xb0,
+ 0xb4, 0xb8, 8, 2, 15, 0x004, 29),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_SSUSB_TOP_XHCI, "ssusb_top_xhci_sel",
+ ssusb_top_xhci_parents, 0xb0,
+ 0xb4, 0xb8, 16, 2, 23, 0x004, 30),
+ MUX_CLR_SET_UPD_FLAGS(CLK_TOP_MUX_SPM, "spm_sel",
+ spm_parents, 0xb0,
+ 0xb4, 0xb8, 24, 1, 31, 0x008, 0, CLK_IS_CRITICAL),
+ /* CLK_CFG_8 */
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_I2C, "i2c_sel",
+ i2c_parents, 0xc0,
+ 0xc4, 0xc8, 0, 2, 7, 0x008, 1),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_SCP, "scp_sel",
+ scp_parents, 0xc0,
+ 0xc4, 0xc8, 8, 3, 15, 0x008, 2),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_SENINF, "seninf_sel",
+ seninf_parents, 0xc0,
+ 0xc4, 0xc8, 16, 2, 23, 0x008, 3),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_DXCC, "dxcc_sel",
+ dxcc_parents, 0xc0,
+ 0xc4, 0xc8, 24, 2, 31, 0x008, 4),
+ /* CLK_CFG_9 */
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_AUD_ENG1, "aud_eng1_sel",
+ aud_engen1_parents, 0xd0,
+ 0xd4, 0xd8, 0, 2, 7, 0x008, 5),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_AUD_ENG2, "aud_eng2_sel",
+ aud_engen2_parents, 0xd0,
+ 0xd4, 0xd8, 8, 2, 15, 0x008, 6),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_FAES_UFSFDE, "faes_ufsfde_sel",
+ faes_ufsfde_parents, 0xd0,
+ 0xd4, 0xd8, 16, 3, 23, 0x008, 7),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_FUFS, "fufs_sel",
+ fufs_parents, 0xd0,
+ 0xd4, 0xd8, 24, 2, 31, 0x008, 8),
+ /* CLK_CFG_10 */
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_AUD_1, "aud_1_sel",
+ aud_1_parents, 0xe0,
+ 0xe4, 0xe8, 0, 1, 7, 0x008, 9),
+ MUX_CLR_SET_UPD(CLK_TOP_MUX_AUD_2, "aud_2_sel",
+ aud_2_parents, 0xe0,
+ 0xe4, 0xe8, 8, 1, 15, 0x008, 10),
+};
+
+static const char * const apll_i2s0_parents[] = {
+ "aud_1_sel",
+ "aud_2_sel"
+};
+
+static const char * const apll_i2s1_parents[] = {
+ "aud_1_sel",
+ "aud_2_sel"
+};
+
+static const char * const apll_i2s2_parents[] = {
+ "aud_1_sel",
+ "aud_2_sel"
+};
+
+static const char * const apll_i2s3_parents[] = {
+ "aud_1_sel",
+ "aud_2_sel"
+};
+
+static const char * const apll_i2s4_parents[] = {
+ "aud_1_sel",
+ "aud_2_sel"
+};
+
+static const char * const apll_i2s5_parents[] = {
+ "aud_1_sel",
+ "aud_2_sel"
+};
+
+static struct mtk_composite top_aud_muxes[] = {
+ MUX(CLK_TOP_MUX_APLL_I2S0, "apll_i2s0_sel", apll_i2s0_parents,
+ 0x320, 8, 1),
+ MUX(CLK_TOP_MUX_APLL_I2S1, "apll_i2s1_sel", apll_i2s1_parents,
+ 0x320, 9, 1),
+ MUX(CLK_TOP_MUX_APLL_I2S2, "apll_i2s2_sel", apll_i2s2_parents,
+ 0x320, 10, 1),
+ MUX(CLK_TOP_MUX_APLL_I2S3, "apll_i2s3_sel", apll_i2s3_parents,
+ 0x320, 11, 1),
+ MUX(CLK_TOP_MUX_APLL_I2S4, "apll_i2s4_sel", apll_i2s4_parents,
+ 0x320, 12, 1),
+ MUX(CLK_TOP_MUX_APLL_I2S5, "apll_i2s5_sel", apll_i2s5_parents,
+ 0x328, 20, 1),
+};
+
+static struct mtk_composite top_aud_divs[] = {
+ DIV_GATE(CLK_TOP_APLL12_DIV0, "apll12_div0", "apll_i2s0_sel",
+ 0x320, 2, 0x324, 8, 0),
+ DIV_GATE(CLK_TOP_APLL12_DIV1, "apll12_div1", "apll_i2s1_sel",
+ 0x320, 3, 0x324, 8, 8),
+ DIV_GATE(CLK_TOP_APLL12_DIV2, "apll12_div2", "apll_i2s2_sel",
+ 0x320, 4, 0x324, 8, 16),
+ DIV_GATE(CLK_TOP_APLL12_DIV3, "apll12_div3", "apll_i2s3_sel",
+ 0x320, 5, 0x324, 8, 24),
+ DIV_GATE(CLK_TOP_APLL12_DIV4, "apll12_div4", "apll_i2s4_sel",
+ 0x320, 6, 0x328, 8, 0),
+ DIV_GATE(CLK_TOP_APLL12_DIVB, "apll12_divb", "apll12_div4",
+ 0x320, 7, 0x328, 8, 8),
+};
+
+static const struct mtk_gate_regs infra0_cg_regs = {
+ .set_ofs = 0x80,
+ .clr_ofs = 0x84,
+ .sta_ofs = 0x90,
+};
+
+static const struct mtk_gate_regs infra1_cg_regs = {
+ .set_ofs = 0x88,
+ .clr_ofs = 0x8c,
+ .sta_ofs = 0x94,
+};
+
+static const struct mtk_gate_regs infra2_cg_regs = {
+ .set_ofs = 0xa4,
+ .clr_ofs = 0xa8,
+ .sta_ofs = 0xac,
+};
+
+static const struct mtk_gate_regs infra3_cg_regs = {
+ .set_ofs = 0xc0,
+ .clr_ofs = 0xc4,
+ .sta_ofs = 0xc8,
+};
+
+#define GATE_INFRA0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &infra0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_INFRA1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &infra1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_INFRA2(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &infra2_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_INFRA3(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &infra3_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate infra_clks[] = {
+ /* INFRA0 */
+ GATE_INFRA0(CLK_INFRA_PMIC_TMR, "infra_pmic_tmr",
+ "axi_sel", 0),
+ GATE_INFRA0(CLK_INFRA_PMIC_AP, "infra_pmic_ap",
+ "axi_sel", 1),
+ GATE_INFRA0(CLK_INFRA_PMIC_MD, "infra_pmic_md",
+ "axi_sel", 2),
+ GATE_INFRA0(CLK_INFRA_PMIC_CONN, "infra_pmic_conn",
+ "axi_sel", 3),
+ GATE_INFRA0(CLK_INFRA_SCPSYS, "infra_scp",
+ "axi_sel", 4),
+ GATE_INFRA0(CLK_INFRA_SEJ, "infra_sej",
+ "f_f26m_ck", 5),
+ GATE_INFRA0(CLK_INFRA_APXGPT, "infra_apxgpt",
+ "axi_sel", 6),
+ GATE_INFRA0(CLK_INFRA_ICUSB, "infra_icusb",
+ "axi_sel", 8),
+ GATE_INFRA0(CLK_INFRA_GCE, "infra_gce",
+ "axi_sel", 9),
+ GATE_INFRA0(CLK_INFRA_THERM, "infra_therm",
+ "axi_sel", 10),
+ GATE_INFRA0(CLK_INFRA_I2C0, "infra_i2c0",
+ "i2c_sel", 11),
+ GATE_INFRA0(CLK_INFRA_I2C1, "infra_i2c1",
+ "i2c_sel", 12),
+ GATE_INFRA0(CLK_INFRA_I2C2, "infra_i2c2",
+ "i2c_sel", 13),
+ GATE_INFRA0(CLK_INFRA_I2C3, "infra_i2c3",
+ "i2c_sel", 14),
+ GATE_INFRA0(CLK_INFRA_PWM_HCLK, "infra_pwm_hclk",
+ "axi_sel", 15),
+ GATE_INFRA0(CLK_INFRA_PWM1, "infra_pwm1",
+ "i2c_sel", 16),
+ GATE_INFRA0(CLK_INFRA_PWM2, "infra_pwm2",
+ "i2c_sel", 17),
+ GATE_INFRA0(CLK_INFRA_PWM3, "infra_pwm3",
+ "i2c_sel", 18),
+ GATE_INFRA0(CLK_INFRA_PWM4, "infra_pwm4",
+ "i2c_sel", 19),
+ GATE_INFRA0(CLK_INFRA_PWM, "infra_pwm",
+ "i2c_sel", 21),
+ GATE_INFRA0(CLK_INFRA_UART0, "infra_uart0",
+ "uart_sel", 22),
+ GATE_INFRA0(CLK_INFRA_UART1, "infra_uart1",
+ "uart_sel", 23),
+ GATE_INFRA0(CLK_INFRA_UART2, "infra_uart2",
+ "uart_sel", 24),
+ GATE_INFRA0(CLK_INFRA_UART3, "infra_uart3",
+ "uart_sel", 25),
+ GATE_INFRA0(CLK_INFRA_GCE_26M, "infra_gce_26m",
+ "axi_sel", 27),
+ GATE_INFRA0(CLK_INFRA_CQ_DMA_FPC, "infra_cqdma_fpc",
+ "axi_sel", 28),
+ GATE_INFRA0(CLK_INFRA_BTIF, "infra_btif",
+ "axi_sel", 31),
+ /* INFRA1 */
+ GATE_INFRA1(CLK_INFRA_SPI0, "infra_spi0",
+ "spi_sel", 1),
+ GATE_INFRA1(CLK_INFRA_MSDC0, "infra_msdc0",
+ "msdc50_hclk_sel", 2),
+ GATE_INFRA1(CLK_INFRA_MSDC1, "infra_msdc1",
+ "axi_sel", 4),
+ GATE_INFRA1(CLK_INFRA_MSDC2, "infra_msdc2",
+ "axi_sel", 5),
+ GATE_INFRA1(CLK_INFRA_MSDC0_SCK, "infra_msdc0_sck",
+ "msdc50_0_sel", 6),
+ GATE_INFRA1(CLK_INFRA_DVFSRC, "infra_dvfsrc",
+ "f_f26m_ck", 7),
+ GATE_INFRA1(CLK_INFRA_GCPU, "infra_gcpu",
+ "axi_sel", 8),
+ GATE_INFRA1(CLK_INFRA_TRNG, "infra_trng",
+ "axi_sel", 9),
+ GATE_INFRA1(CLK_INFRA_AUXADC, "infra_auxadc",
+ "f_f26m_ck", 10),
+ GATE_INFRA1(CLK_INFRA_CPUM, "infra_cpum",
+ "axi_sel", 11),
+ GATE_INFRA1(CLK_INFRA_CCIF1_AP, "infra_ccif1_ap",
+ "axi_sel", 12),
+ GATE_INFRA1(CLK_INFRA_CCIF1_MD, "infra_ccif1_md",
+ "axi_sel", 13),
+ GATE_INFRA1(CLK_INFRA_AUXADC_MD, "infra_auxadc_md",
+ "f_f26m_ck", 14),
+ GATE_INFRA1(CLK_INFRA_MSDC1_SCK, "infra_msdc1_sck",
+ "msdc30_1_sel", 16),
+ GATE_INFRA1(CLK_INFRA_MSDC2_SCK, "infra_msdc2_sck",
+ "msdc30_2_sel", 17),
+ GATE_INFRA1(CLK_INFRA_AP_DMA, "infra_apdma",
+ "axi_sel", 18),
+ GATE_INFRA1(CLK_INFRA_XIU, "infra_xiu",
+ "axi_sel", 19),
+ GATE_INFRA1(CLK_INFRA_DEVICE_APC, "infra_device_apc",
+ "axi_sel", 20),
+ GATE_INFRA1(CLK_INFRA_CCIF_AP, "infra_ccif_ap",
+ "axi_sel", 23),
+ GATE_INFRA1(CLK_INFRA_DEBUGSYS, "infra_debugsys",
+ "axi_sel", 24),
+ GATE_INFRA1(CLK_INFRA_AUDIO, "infra_audio",
+ "axi_sel", 25),
+ GATE_INFRA1(CLK_INFRA_CCIF_MD, "infra_ccif_md",
+ "axi_sel", 26),
+ GATE_INFRA1(CLK_INFRA_DXCC_SEC_CORE, "infra_dxcc_sec_core",
+ "dxcc_sel", 27),
+ GATE_INFRA1(CLK_INFRA_DXCC_AO, "infra_dxcc_ao",
+ "dxcc_sel", 28),
+ GATE_INFRA1(CLK_INFRA_DEVMPU_BCLK, "infra_devmpu_bclk",
+ "axi_sel", 30),
+ GATE_INFRA1(CLK_INFRA_DRAMC_F26M, "infra_dramc_f26m",
+ "f_f26m_ck", 31),
+ /* INFRA2 */
+ GATE_INFRA2(CLK_INFRA_IRTX, "infra_irtx",
+ "f_f26m_ck", 0),
+ GATE_INFRA2(CLK_INFRA_USB, "infra_usb",
+ "usb_top_sel", 1),
+ GATE_INFRA2(CLK_INFRA_DISP_PWM, "infra_disppwm",
+ "axi_sel", 2),
+ GATE_INFRA2(CLK_INFRA_CLDMA_BCLK, "infra_cldma_bclk",
+ "axi_sel", 3),
+ GATE_INFRA2(CLK_INFRA_AUDIO_26M_BCLK, "infra_audio_26m_bclk",
+ "f_f26m_ck", 4),
+ GATE_INFRA2(CLK_INFRA_SPI1, "infra_spi1",
+ "spi_sel", 6),
+ GATE_INFRA2(CLK_INFRA_I2C4, "infra_i2c4",
+ "i2c_sel", 7),
+ GATE_INFRA2(CLK_INFRA_MODEM_TEMP_SHARE, "infra_md_tmp_share",
+ "f_f26m_ck", 8),
+ GATE_INFRA2(CLK_INFRA_SPI2, "infra_spi2",
+ "spi_sel", 9),
+ GATE_INFRA2(CLK_INFRA_SPI3, "infra_spi3",
+ "spi_sel", 10),
+ GATE_INFRA2(CLK_INFRA_UNIPRO_SCK, "infra_unipro_sck",
+ "ssusb_top_xhci_sel", 11),
+ GATE_INFRA2(CLK_INFRA_UNIPRO_TICK, "infra_unipro_tick",
+ "fufs_sel", 12),
+ GATE_INFRA2(CLK_INFRA_UFS_MP_SAP_BCLK, "infra_ufs_mp_sap_bck",
+ "fufs_sel", 13),
+ GATE_INFRA2(CLK_INFRA_MD32_BCLK, "infra_md32_bclk",
+ "axi_sel", 14),
+ GATE_INFRA2(CLK_INFRA_SSPM, "infra_sspm",
+ "sspm_sel", 15),
+ GATE_INFRA2(CLK_INFRA_UNIPRO_MBIST, "infra_unipro_mbist",
+ "axi_sel", 16),
+ GATE_INFRA2(CLK_INFRA_SSPM_BUS_HCLK, "infra_sspm_bus_hclk",
+ "axi_sel", 17),
+ GATE_INFRA2(CLK_INFRA_I2C5, "infra_i2c5",
+ "i2c_sel", 18),
+ GATE_INFRA2(CLK_INFRA_I2C5_ARBITER, "infra_i2c5_arbiter",
+ "i2c_sel", 19),
+ GATE_INFRA2(CLK_INFRA_I2C5_IMM, "infra_i2c5_imm",
+ "i2c_sel", 20),
+ GATE_INFRA2(CLK_INFRA_I2C1_ARBITER, "infra_i2c1_arbiter",
+ "i2c_sel", 21),
+ GATE_INFRA2(CLK_INFRA_I2C1_IMM, "infra_i2c1_imm",
+ "i2c_sel", 22),
+ GATE_INFRA2(CLK_INFRA_I2C2_ARBITER, "infra_i2c2_arbiter",
+ "i2c_sel", 23),
+ GATE_INFRA2(CLK_INFRA_I2C2_IMM, "infra_i2c2_imm",
+ "i2c_sel", 24),
+ GATE_INFRA2(CLK_INFRA_SPI4, "infra_spi4",
+ "spi_sel", 25),
+ GATE_INFRA2(CLK_INFRA_SPI5, "infra_spi5",
+ "spi_sel", 26),
+ GATE_INFRA2(CLK_INFRA_CQ_DMA, "infra_cqdma",
+ "axi_sel", 27),
+ GATE_INFRA2(CLK_INFRA_UFS, "infra_ufs",
+ "fufs_sel", 28),
+ GATE_INFRA2(CLK_INFRA_AES_UFSFDE, "infra_aes_ufsfde",
+ "faes_ufsfde_sel", 29),
+ GATE_INFRA2(CLK_INFRA_UFS_TICK, "infra_ufs_tick",
+ "fufs_sel", 30),
+ /* INFRA3 */
+ GATE_INFRA3(CLK_INFRA_MSDC0_SELF, "infra_msdc0_self",
+ "msdc50_0_sel", 0),
+ GATE_INFRA3(CLK_INFRA_MSDC1_SELF, "infra_msdc1_self",
+ "msdc50_0_sel", 1),
+ GATE_INFRA3(CLK_INFRA_MSDC2_SELF, "infra_msdc2_self",
+ "msdc50_0_sel", 2),
+ GATE_INFRA3(CLK_INFRA_SSPM_26M_SELF, "infra_sspm_26m_self",
+ "f_f26m_ck", 3),
+ GATE_INFRA3(CLK_INFRA_SSPM_32K_SELF, "infra_sspm_32k_self",
+ "f_f26m_ck", 4),
+ GATE_INFRA3(CLK_INFRA_UFS_AXI, "infra_ufs_axi",
+ "axi_sel", 5),
+ GATE_INFRA3(CLK_INFRA_I2C6, "infra_i2c6",
+ "i2c_sel", 6),
+ GATE_INFRA3(CLK_INFRA_AP_MSDC0, "infra_ap_msdc0",
+ "msdc50_hclk_sel", 7),
+ GATE_INFRA3(CLK_INFRA_MD_MSDC0, "infra_md_msdc0",
+ "msdc50_hclk_sel", 8),
+ GATE_INFRA3(CLK_INFRA_CCIF2_AP, "infra_ccif2_ap",
+ "axi_sel", 16),
+ GATE_INFRA3(CLK_INFRA_CCIF2_MD, "infra_ccif2_md",
+ "axi_sel", 17),
+ GATE_INFRA3(CLK_INFRA_CCIF3_AP, "infra_ccif3_ap",
+ "axi_sel", 18),
+ GATE_INFRA3(CLK_INFRA_CCIF3_MD, "infra_ccif3_md",
+ "axi_sel", 19),
+ GATE_INFRA3(CLK_INFRA_SEJ_F13M, "infra_sej_f13m",
+ "f_f26m_ck", 20),
+ GATE_INFRA3(CLK_INFRA_AES_BCLK, "infra_aes_bclk",
+ "axi_sel", 21),
+ GATE_INFRA3(CLK_INFRA_I2C7, "infra_i2c7",
+ "i2c_sel", 22),
+ GATE_INFRA3(CLK_INFRA_I2C8, "infra_i2c8",
+ "i2c_sel", 23),
+ GATE_INFRA3(CLK_INFRA_FBIST2FPC, "infra_fbist2fpc",
+ "msdc50_0_sel", 24),
+};
+
+static const struct mtk_gate_regs apmixed_cg_regs = {
+ .set_ofs = 0x20,
+ .clr_ofs = 0x20,
+ .sta_ofs = 0x20,
+};
+
+#define GATE_APMIXED_FLAGS(_id, _name, _parent, _shift, _flags) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &apmixed_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
+ .flags = _flags, \
+ }
+
+#define GATE_APMIXED(_id, _name, _parent, _shift) \
+ GATE_APMIXED_FLAGS(_id, _name, _parent, _shift, 0)
+
+static const struct mtk_gate apmixed_clks[] = {
+ /* AUDIO0 */
+ GATE_APMIXED(CLK_APMIXED_SSUSB_26M, "apmixed_ssusb26m",
+ "f_f26m_ck", 4),
+ GATE_APMIXED_FLAGS(CLK_APMIXED_APPLL_26M, "apmixed_appll26m",
+ "f_f26m_ck", 5, CLK_IS_CRITICAL),
+ GATE_APMIXED(CLK_APMIXED_MIPIC0_26M, "apmixed_mipic026m",
+ "f_f26m_ck", 6),
+ GATE_APMIXED(CLK_APMIXED_MDPLLGP_26M, "apmixed_mdpll26m",
+ "f_f26m_ck", 7),
+ GATE_APMIXED(CLK_APMIXED_MMSYS_26M, "apmixed_mmsys26m",
+ "f_f26m_ck", 8),
+ GATE_APMIXED(CLK_APMIXED_UFS_26M, "apmixed_ufs26m",
+ "f_f26m_ck", 9),
+ GATE_APMIXED(CLK_APMIXED_MIPIC1_26M, "apmixed_mipic126m",
+ "f_f26m_ck", 11),
+ GATE_APMIXED(CLK_APMIXED_MEMPLL_26M, "apmixed_mempll26m",
+ "f_f26m_ck", 13),
+ GATE_APMIXED(CLK_APMIXED_CLKSQ_LVPLL_26M, "apmixed_lvpll26m",
+ "f_f26m_ck", 14),
+ GATE_APMIXED(CLK_APMIXED_MIPID0_26M, "apmixed_mipid026m",
+ "f_f26m_ck", 16),
+ GATE_APMIXED(CLK_APMIXED_MIPID1_26M, "apmixed_mipid126m",
+ "f_f26m_ck", 17),
+};
+
+#define MT8183_PLL_FMAX (3800UL * MHZ)
+#define MT8183_PLL_FMIN (1500UL * MHZ)
+
+#define PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, \
+ _rst_bar_mask, _pcwbits, _pcwibits, _pd_reg, \
+ _pd_shift, _tuner_reg, _tuner_en_reg, \
+ _tuner_en_bit, _pcw_reg, _pcw_shift, \
+ _div_table) { \
+ .id = _id, \
+ .name = _name, \
+ .reg = _reg, \
+ .pwr_reg = _pwr_reg, \
+ .en_mask = _en_mask, \
+ .flags = _flags, \
+ .rst_bar_mask = _rst_bar_mask, \
+ .fmax = MT8183_PLL_FMAX, \
+ .fmin = MT8183_PLL_FMIN, \
+ .pcwbits = _pcwbits, \
+ .pcwibits = _pcwibits, \
+ .pd_reg = _pd_reg, \
+ .pd_shift = _pd_shift, \
+ .tuner_reg = _tuner_reg, \
+ .tuner_en_reg = _tuner_en_reg, \
+ .tuner_en_bit = _tuner_en_bit, \
+ .pcw_reg = _pcw_reg, \
+ .pcw_shift = _pcw_shift, \
+ .div_table = _div_table, \
+ }
+
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, \
+ _rst_bar_mask, _pcwbits, _pcwibits, _pd_reg, \
+ _pd_shift, _tuner_reg, _tuner_en_reg, \
+ _tuner_en_bit, _pcw_reg, _pcw_shift) \
+ PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, \
+ _rst_bar_mask, _pcwbits, _pcwibits, _pd_reg, \
+ _pd_shift, _tuner_reg, _tuner_en_reg, \
+ _tuner_en_bit, _pcw_reg, _pcw_shift, NULL)
+
+static const struct mtk_pll_data plls[] = {
+ PLL(CLK_APMIXED_ARMPLL_LL, "armpll_ll", 0x0200, 0x020C, 0x00000001,
+ HAVE_RST_BAR | PLL_AO, BIT(24), 22, 8, 0x0204, 24, 0x0, 0x0, 0,
+ 0x0204, 0),
+ PLL(CLK_APMIXED_ARMPLL_L, "armpll_l", 0x0210, 0x021C, 0x00000001,
+ HAVE_RST_BAR | PLL_AO, BIT(24), 22, 8, 0x0214, 24, 0x0, 0x0, 0,
+ 0x0214, 0),
+ PLL(CLK_APMIXED_CCIPLL, "ccipll", 0x0290, 0x029C, 0x00000001,
+ HAVE_RST_BAR | PLL_AO, BIT(24), 22, 8, 0x0294, 24, 0x0, 0x0, 0,
+ 0x0294, 0),
+ PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x0220, 0x022C, 0x00000001,
+ HAVE_RST_BAR, BIT(24), 22, 8, 0x0224, 24, 0x0, 0x0, 0,
+ 0x0224, 0),
+ PLL(CLK_APMIXED_UNIV2PLL, "univ2pll", 0x0230, 0x023C, 0x00000001,
+ HAVE_RST_BAR, BIT(24), 22, 8, 0x0234, 24, 0x0, 0x0, 0,
+ 0x0234, 0),
+ PLL(CLK_APMIXED_MFGPLL, "mfgpll", 0x0240, 0x024C, 0x00000001,
+ 0, 0, 22, 8, 0x0244, 24, 0x0, 0x0, 0, 0x0244, 0),
+ PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x0250, 0x025C, 0x00000001,
+ 0, 0, 22, 8, 0x0254, 24, 0x0, 0x0, 0, 0x0254, 0),
+ PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x0260, 0x026C, 0x00000001,
+ 0, 0, 22, 8, 0x0264, 24, 0x0, 0x0, 0, 0x0264, 0),
+ PLL(CLK_APMIXED_MMPLL, "mmpll", 0x0270, 0x027C, 0x00000001,
+ HAVE_RST_BAR, BIT(23), 22, 8, 0x0274, 24, 0x0, 0x0, 0,
+ 0x0274, 0),
+ PLL(CLK_APMIXED_APLL1, "apll1", 0x02A0, 0x02B0, 0x00000001,
+ 0, 0, 32, 8, 0x02A0, 1, 0x02A8, 0x0014, 0, 0x02A4, 0),
+ PLL(CLK_APMIXED_APLL2, "apll2", 0x02b4, 0x02c4, 0x00000001,
+ 0, 0, 32, 8, 0x02b4, 1, 0x02BC, 0x0014, 1, 0x02B8, 0),
+};
+
+static int clk_mt8183_apmixed_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ struct device_node *node = pdev->dev.of_node;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
+
+ mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+
+ mtk_clk_register_gates(node, apmixed_clks, ARRAY_SIZE(apmixed_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static int clk_mt8183_top_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ void __iomem *base;
+ struct clk_onecell_data *clk_data;
+ struct device_node *node = pdev->dev.of_node;
+ int r;
+
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base)) {
+ pr_err("%s(): ioremap failed\n", __func__);
+ return PTR_ERR(base);
+ }
+
+ clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
+
+ mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
+ clk_data);
+
+ mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
+
+ mtk_clk_register_muxes(top_muxes, ARRAY_SIZE(top_muxes),
+ node, &mt8183_clk_lock, clk_data);
+
+ mtk_clk_register_composites(top_aud_muxes, ARRAY_SIZE(top_aud_muxes),
+ base, &mt8183_clk_lock, clk_data);
+
+ mtk_clk_register_composites(top_aud_divs, ARRAY_SIZE(top_aud_divs),
+ base, &mt8183_clk_lock, clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static int clk_mt8183_infra_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ struct device_node *node = pdev->dev.of_node;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK);
+
+ mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
+ return r;
+}
+
+static const struct of_device_id of_match_clk_mt8183[] = {
+ {
+ .compatible = "mediatek,mt8183-apmixedsys",
+ .data = clk_mt8183_apmixed_probe,
+ }, {
+ .compatible = "mediatek,mt8183-topckgen",
+ .data = clk_mt8183_top_probe,
+ }, {
+ .compatible = "mediatek,mt8183-infracfg",
+ .data = clk_mt8183_infra_probe,
+ }, {
+ /* sentinel */
+ }
+};
+
+static int clk_mt8183_probe(struct platform_device *pdev)
+{
+ int (*clk_probe)(struct platform_device *pdev);
+ int r;
+
+ clk_probe = of_device_get_match_data(&pdev->dev);
+ if (!clk_probe)
+ return -EINVAL;
+
+ r = clk_probe(pdev);
+ if (r)
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+
+ return r;
+}
+
+static struct platform_driver clk_mt8183_drv = {
+ .probe = clk_mt8183_probe,
+ .driver = {
+ .name = "clk-mt8183",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_clk_mt8183,
+ },
+};
+
+static int __init clk_mt8183_init(void)
+{
+ return platform_driver_register(&clk_mt8183_drv);
+}
+
+arch_initcall(clk_mt8183_init);
--
1.9.1
^ permalink raw reply related
* [PATCH v4 08/10] arm64: dts: mt8183: Add clock controller device nodes
From: Erin Lo @ 2018-07-31 5:38 UTC (permalink / raw)
To: Matthias Brugger, Rob Herring, Mark Rutland, Thomas Gleixner,
Jason Cooper, Marc Zyngier, Greg Kroah-Hartman, Stephen Boyd
Cc: devicetree, srv_heupstream, linux-kernel, linux-serial,
linux-mediatek, linux-arm-kernel, yingjoe.chen, erin.lo,
mars.cheng, eddie.huang, linux-clk, Weiyi Lu
In-Reply-To: <1533015487-60189-1-git-send-email-erin.lo@mediatek.com>
From: Weiyi Lu <weiyi.lu@mediatek.com>
Add clock controller nodes for MT8183, include topckgen, infracfg,
apmixedsys and subsystem.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 92 ++++++++++++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 1553265..6b87a24 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -5,6 +5,7 @@
* Erin Lo <erin.lo@mediatek.com>
*/
+#include <dt-bindings/clock/mt8183-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -112,6 +113,13 @@
method = "smc";
};
+ clk26m: oscillator@0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
@@ -143,4 +151,88 @@
interrupt-parent = <&gic>;
reg = <0 0x0c530a80 0 0x50>;
};
+
+ topckgen: syscon@10000000 {
+ compatible = "mediatek,mt8183-topckgen", "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg: syscon@10001000 {
+ compatible = "mediatek,mt8183-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ apmixedsys: syscon@1000c000 {
+ compatible = "mediatek,mt8183-apmixedsys", "syscon";
+ reg = <0 0x1000c000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ audiosys: syscon@11220000 {
+ compatible = "mediatek,mt8183-audiosys", "syscon";
+ reg = <0 0x11220000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ mfgcfg: syscon@13000000 {
+ compatible = "mediatek,mt8183-mfgcfg", "syscon";
+ reg = <0 0x13000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt8183-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: syscon@15020000 {
+ compatible = "mediatek,mt8183-imgsys", "syscon";
+ reg = <0 0x15020000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: syscon@16000000 {
+ compatible = "mediatek,mt8183-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: syscon@17000000 {
+ compatible = "mediatek,mt8183-vencsys", "syscon";
+ reg = <0 0x17000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ipu_conn: syscon@19000000 {
+ compatible = "mediatek,mt8183-ipu_conn", "syscon";
+ reg = <0 0x19000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ipu_adl: syscon@19010000 {
+ compatible = "mediatek,mt8183-ipu_adl", "syscon";
+ reg = <0 0x19010000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ipu_core0: syscon@19180000 {
+ compatible = "mediatek,mt8183-ipu_core0", "syscon";
+ reg = <0 0x19180000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ipu_core1: syscon@19280000 {
+ compatible = "mediatek,mt8183-ipu_core1", "syscon";
+ reg = <0 0x19280000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys: syscon@1a000000 {
+ compatible = "mediatek,mt8183-camsys", "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
--
1.9.1
^ permalink raw reply related
* [PATCH v4 09/10] dt-bindings: serial: Add compatible for Mediatek MT8183
From: Erin Lo @ 2018-07-31 5:38 UTC (permalink / raw)
To: Matthias Brugger, Rob Herring, Mark Rutland, Thomas Gleixner,
Jason Cooper, Marc Zyngier, Greg Kroah-Hartman, Stephen Boyd
Cc: devicetree, srv_heupstream, linux-kernel, linux-serial,
linux-mediatek, linux-arm-kernel, yingjoe.chen, erin.lo,
mars.cheng, eddie.huang, linux-clk
In-Reply-To: <1533015487-60189-1-git-send-email-erin.lo@mediatek.com>
This adds dt-binding documentation of uart for Mediatek MT8183 SoC
Platform.
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/serial/mtk-uart.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index f73abff..4783336 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -15,6 +15,7 @@ Required properties:
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
* "mediatek,mt8135-uart" for MT8135 compatible UARTS
* "mediatek,mt8173-uart" for MT8173 compatible UARTS
+ * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
* "mediatek,mt6577-uart" for MT6577 and all of the above
- reg: The base address of the UART register bank.
--
1.9.1
^ permalink raw reply related
* [PATCH v4 10/10] dts: arm64: mt8183: add uart node
From: Erin Lo @ 2018-07-31 5:38 UTC (permalink / raw)
To: Matthias Brugger, Rob Herring, Mark Rutland, Thomas Gleixner,
Jason Cooper, Marc Zyngier, Greg Kroah-Hartman, Stephen Boyd
Cc: devicetree, srv_heupstream, linux-kernel, linux-serial,
linux-mediatek, linux-arm-kernel, yingjoe.chen, erin.lo,
mars.cheng, eddie.huang, linux-clk, Weiyi Lu
In-Reply-To: <1533015487-60189-1-git-send-email-erin.lo@mediatek.com>
From: Weiyi Lu <weiyi.lu@mediatek.com>
Add uart node with correct uart clocks.
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 8 ++++++++
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 30 +++++++++++++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index 2a3dd5a..9b52559 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -12,6 +12,10 @@
model = "MediaTek MT8183 evaluation board";
compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
+ aliases {
+ serial0 = &uart0;
+ };
+
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x80000000>;
@@ -21,3 +25,7 @@
stdout-path = "serial0:921600n8";
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 6b87a24..c22a2dc 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -170,6 +170,36 @@
#clock-cells = <1>;
};
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt8183-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt8183-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x1000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_INFRA_UART1>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt8183-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x1000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_INFRA_UART2>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
audiosys: syscon@11220000 {
compatible = "mediatek,mt8183-audiosys", "syscon";
reg = <0 0x11220000 0 0x1000>;
--
1.9.1
^ permalink raw reply related
* Re: [PATCH v4 03/10] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
From: Marc Zyngier @ 2018-07-31 6:21 UTC (permalink / raw)
To: Erin Lo
Cc: Matthias Brugger, Rob Herring, Mark Rutland, Thomas Gleixner,
Jason Cooper, Greg Kroah-Hartman, Stephen Boyd, devicetree,
srv_heupstream, linux-kernel, linux-serial, linux-mediatek,
linux-arm-kernel, yingjoe.chen, mars.cheng, eddie.huang,
linux-clk, Ben Ho
In-Reply-To: <1533015487-60189-4-git-send-email-erin.lo@mediatek.com>
On Tue, 31 Jul 2018 06:38:00 +0100,
Erin Lo <erin.lo@mediatek.com> wrote:
>
> From: Ben Ho <Ben.Ho@mediatek.com>
>
> Add basic chip support for Mediatek 8183
>
> Signed-off-by: Ben Ho <Ben.Ho@mediatek.com>
> Signed-off-by: Erin Lo <erin.lo@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 23 +++++
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 146 ++++++++++++++++++++++++++++
> 3 files changed, 170 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8183.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 7506b0d..a91d462 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> new file mode 100644
> index 0000000..2a3dd5a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> @@ -0,0 +1,23 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Ben Ho <ben.ho@mediatek.com>
> + * Erin Lo <erin.lo@mediatek.com>
> + */
> +
> +/dts-v1/;
> +#include "mt8183.dtsi"
> +
> +/ {
> + model = "MediaTek MT8183 evaluation board";
> + compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x80000000>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> new file mode 100644
> index 0000000..1553265
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -0,0 +1,146 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Ben Ho <ben.ho@mediatek.com>
> + * Erin Lo <erin.lo@mediatek.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "mediatek,mt8183";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> + core1 {
> + cpu = <&cpu1>;
> + };
> + core2 {
> + cpu = <&cpu2>;
> + };
> + core3 {
> + cpu = <&cpu3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&cpu4>;
> + };
> + core1 {
> + cpu = <&cpu5>;
> + };
> + core2 {
> + cpu = <&cpu6>;
> + };
> + core3 {
> + cpu = <&cpu7>;
> + };
> + };
> + };
> +
> + cpu0: cpu@000 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x000>;
> + enable-method = "psci";
> + };
> +
> + cpu1: cpu@001 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x001>;
> + enable-method = "psci";
> + };
> +
> + cpu2: cpu@002 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x002>;
> + enable-method = "psci";
> + };
> +
> + cpu3: cpu@003 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x003>;
> + enable-method = "psci";
> + };
> +
> + cpu4: cpu@100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a73";
> + reg = <0x100>;
> + enable-method = "psci";
> + };
> +
> + cpu5: cpu@101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a73";
> + reg = <0x101>;
> + enable-method = "psci";
> + };
> +
> + cpu6: cpu@102 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a73";
> + reg = <0x102>;
> + enable-method = "psci";
> + };
> +
> + cpu7: cpu@103 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a73";
> + reg = <0x103>;
> + enable-method = "psci";
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + gic: interrupt-controller@0c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x40000>, /* GICD */
> + <0 0x0c100000 0 0x200000>, /* GICR */
> + <0 0x0c400000 0 0x2000>, /* GICC */
> + <0 0x0c410000 0 0x1000>, /* GICH */
> + <0 0x0c420000 0 0x2000>; /* GICV */
> +
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sysirq: intpol-controller@0c530a80 {
> + compatible = "mediatek,mt8183-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x0c530a80 0 0x50>;
> + };
> +};
Not directly related to that patch, but still worth asking, if this HW
is going to get some mainline support:
I do not see any mention on the PMU yet. It'd be good to see it added
early, specially if we need to express CPU affinity (as this change
the size of the GICv3 interrupt specifier, see the rk3399 support for
an example).
Thanks,
M.
--
Jazz is not dead, it just smell funny.
^ permalink raw reply
* Re: [PATCH v4 04/10] dt-bindings: ARM: Mediatek: Document bindings for MT8183
From: Rob Herring @ 2018-07-31 19:22 UTC (permalink / raw)
To: Erin Lo
Cc: Matthias Brugger, Mark Rutland, Thomas Gleixner, Jason Cooper,
Marc Zyngier, Greg Kroah-Hartman, Stephen Boyd, devicetree,
srv_heupstream, linux-kernel, linux-serial, linux-mediatek,
linux-arm-kernel, yingjoe.chen, mars.cheng, eddie.huang,
linux-clk, Weiyi Lu
In-Reply-To: <1533015487-60189-5-git-send-email-erin.lo@mediatek.com>
On Tue, Jul 31, 2018 at 01:38:01PM +0800, Erin Lo wrote:
> From: Weiyi Lu <weiyi.lu@mediatek.com>
>
> This patch adds the binding documentation for apmixedsys, audiosys,
> camsys, imgsys, infracfg, mfgcfg, mmsys, topckgen, vdecsys, vencsys
> and ipu for Mediatek MT8183.
>
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> Signed-off-by: Erin Lo <erin.lo@mediatek.com>
> ---
> .../bindings/arm/mediatek/mediatek,apmixedsys.txt | 1 +
> .../bindings/arm/mediatek/mediatek,audsys.txt | 1 +
> .../bindings/arm/mediatek/mediatek,camsys.txt | 1 +
> .../bindings/arm/mediatek/mediatek,imgsys.txt | 1 +
> .../bindings/arm/mediatek/mediatek,infracfg.txt | 1 +
> .../bindings/arm/mediatek/mediatek,ipu.txt | 43 ++++++++++++++++++++++
> .../bindings/arm/mediatek/mediatek,mfgcfg.txt | 1 +
> .../bindings/arm/mediatek/mediatek,mmsys.txt | 1 +
> .../bindings/arm/mediatek/mediatek,topckgen.txt | 1 +
> .../bindings/arm/mediatek/mediatek,vdecsys.txt | 1 +
> .../bindings/arm/mediatek/mediatek,vencsys.txt | 1 +
> 11 files changed, 53 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,ipu.txt
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply
* Re: [PATCH v4 05/10] clk: mediatek: Add dt-bindings for MT8183 clocks
From: Rob Herring @ 2018-07-31 19:24 UTC (permalink / raw)
To: Erin Lo
Cc: Matthias Brugger, Mark Rutland, Thomas Gleixner, Jason Cooper,
Marc Zyngier, Greg Kroah-Hartman, Stephen Boyd, devicetree,
srv_heupstream, linux-kernel, linux-serial, linux-mediatek,
linux-arm-kernel, yingjoe.chen, mars.cheng, eddie.huang,
linux-clk, Weiyi Lu
In-Reply-To: <1533015487-60189-6-git-send-email-erin.lo@mediatek.com>
On Tue, Jul 31, 2018 at 01:38:02PM +0800, Erin Lo wrote:
> From: Weiyi Lu <weiyi.lu@mediatek.com>
>
> Add MT8183 clock dt-bindings, include topckgen, apmixedsys,
> infracfg and subsystem clocks.
>
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> Signed-off-by: Erin Lo <erin.lo@mediatek.com>
> ---
> include/dt-bindings/clock/mt8183-clk.h | 413 +++++++++++++++++++++++++++++++++
> 1 file changed, 413 insertions(+)
> create mode 100644 include/dt-bindings/clock/mt8183-clk.h
>
> diff --git a/include/dt-bindings/clock/mt8183-clk.h b/include/dt-bindings/clock/mt8183-clk.h
> new file mode 100644
> index 0000000..bacad53
> --- /dev/null
> +++ b/include/dt-bindings/clock/mt8183-clk.h
> @@ -0,0 +1,413 @@
> +/* SPDX-License-Identifier: GPL-2.0
This should be a separate comment from the copyright. Otherwise,
Reviewed-by: Rob Herring <robh@kernel.org>
> + *
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Weiyi Lu <weiyi.lu@mediatek.com>
> + */
^ permalink raw reply
* Re: [PATCH v11 6/6] tty/serial: atmel: change the driver to work under at91-usart mfd
From: Greg KH @ 2018-08-02 8:11 UTC (permalink / raw)
To: Radu Pirea
Cc: broonie, nicolas.ferre, alexandre.belloni, lee.jones,
richard.genoud, robh+dt, mark.rutland, linux-spi,
linux-arm-kernel, linux-kernel, devicetree, linux-serial
In-Reply-To: <20180713164736.26028-7-radu.pirea@microchip.com>
On Fri, Jul 13, 2018 at 07:47:36PM +0300, Radu Pirea wrote:
> This patch modifies the place where resources and device tree properties
> are searched.
>
> Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Acked-by: Richard Genoud <richard.genoud@gmail.com>
> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
^ permalink raw reply
* [PATCH v2 00/18] MIPS: intel: add initial support for Intel MIPS SoCs
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Michael Turquette, James Hogan, Stephen Boyd, Jiri Slaby,
linux-kernel, Thomas Gleixner, Paul Burton, Rob Herring,
Kate Stewart, Greg Kroah-Hartman, Ralf Baechle,
Philippe Ombredanne, Mark Rutland
This patch series is for adding the support for Intel MIPS
interAptiv SoC GRX500 family. It includes CCF support, serial
driver optimization and DTS modification.
This patch series is applied on top of linux v4.18-rc7.
Basic verification is performed on GRX500 board.
We propose merging this patch series into MIPS Linux tree.
Changes in v2:
- Remove unused _END macros
- Remove the redundant check and not accurate comments
- Replace the get_counter_resolution function with fixed value 2
- Use obj-y and split into per line per .o
- Add EVA mapping description in code comments
- Remove unused include header file
- Do a clean-up for grx500_defconfig
- Rewrite clock driver, add platform clock description details in
clock driver.
- Rewrite clock driver's dt-binding document according to Rob Herring's
comments.
- Simplify device tree docoment, remove some clock description.
- New patch split from previous patch
- The memory address is changed to @20000000
- Update to obj-$(CONFIG_BUILTIN_DTB) as per commit fca3aa166422
- New patch split from previous patch
- Add the board and chip compatible in dt document
- New patch to reorder the head files according to the coding style.
Hua Ma (3):
MIPS: intel: Add initial support for Intel MIPS SoCs
MIPS: dts: Add initial support for Intel MIPS SoCs
dt-binding: MIPS: Add documentation of Intel MIPS SoCs
Songjun Wu (13):
MIPS: dts: Change upper case to lower case
MIPS: dts: Add aliases node for lantiq danube serial
serial: intel: Get serial id from dts
serial: intel: Change ltq_w32_mask to asc_update_bits
MIPS: lantiq: Unselect SWAP_IO_SPACE when LANTIQ is selected
serial: intel: Use readl/writel instead of ltq_r32/ltq_w32
serial: intel: Rename fpiclk to freqclk
serial: intel: Replace clk_enable/clk_disable with clk generic API
serial: intel: Add CCF support
serial: intel: Support more platform
serial: intel: Reorder the head files
serial: intel: Change init_lqasc to static declaration
dt-bindings: serial: lantiq: Add optional properties for CCF
Yixin Zhu (2):
clk: intel: Add clock driver for Intel MIPS SoCs
dt-bindings: clk: Add documentation of grx500 clock controller
.../devicetree/bindings/clock/intel,grx500-clk.txt | 39 ++
Documentation/devicetree/bindings/mips/intel.txt | 17 +
.../devicetree/bindings/serial/lantiq_asc.txt | 15 +
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 30 +-
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/intel-mips/Makefile | 4 +
arch/mips/boot/dts/intel-mips/easy350_anywan.dts | 26 ++
arch/mips/boot/dts/intel-mips/xrx500.dtsi | 66 +++
arch/mips/boot/dts/lantiq/danube.dtsi | 42 +-
arch/mips/boot/dts/lantiq/easy50712.dts | 18 +-
arch/mips/configs/grx500_defconfig | 138 ++++++
.../asm/mach-intel-mips/cpu-feature-overrides.h | 61 +++
arch/mips/include/asm/mach-intel-mips/ioremap.h | 39 ++
arch/mips/include/asm/mach-intel-mips/irq.h | 17 +
.../asm/mach-intel-mips/kernel-entry-init.h | 104 +++++
arch/mips/include/asm/mach-intel-mips/spaces.h | 27 ++
arch/mips/include/asm/mach-intel-mips/war.h | 18 +
arch/mips/intel-mips/Kconfig | 22 +
arch/mips/intel-mips/Makefile | 5 +
arch/mips/intel-mips/Platform | 12 +
arch/mips/intel-mips/irq.c | 35 ++
arch/mips/intel-mips/prom.c | 172 ++++++++
arch/mips/intel-mips/time.c | 42 ++
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 3 +
drivers/clk/intel/Kconfig | 20 +
drivers/clk/intel/Makefile | 7 +
drivers/clk/intel/clk-cgu-pll.c | 166 ++++++++
drivers/clk/intel/clk-cgu-pll.h | 34 ++
drivers/clk/intel/clk-cgu.c | 470 +++++++++++++++++++++
drivers/clk/intel/clk-cgu.h | 259 ++++++++++++
drivers/clk/intel/clk-grx500.c | 168 ++++++++
drivers/tty/serial/Kconfig | 2 +-
drivers/tty/serial/lantiq.c | 143 ++++---
include/dt-bindings/clock/intel,grx500-clk.h | 69 +++
36 files changed, 2206 insertions(+), 87 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/intel,grx500-clk.txt
create mode 100644 Documentation/devicetree/bindings/mips/intel.txt
create mode 100644 arch/mips/boot/dts/intel-mips/Makefile
create mode 100644 arch/mips/boot/dts/intel-mips/easy350_anywan.dts
create mode 100644 arch/mips/boot/dts/intel-mips/xrx500.dtsi
create mode 100644 arch/mips/configs/grx500_defconfig
create mode 100644 arch/mips/include/asm/mach-intel-mips/cpu-feature-overrides.h
create mode 100644 arch/mips/include/asm/mach-intel-mips/ioremap.h
create mode 100644 arch/mips/include/asm/mach-intel-mips/irq.h
create mode 100644 arch/mips/include/asm/mach-intel-mips/kernel-entry-init.h
create mode 100644 arch/mips/include/asm/mach-intel-mips/spaces.h
create mode 100644 arch/mips/include/asm/mach-intel-mips/war.h
create mode 100644 arch/mips/intel-mips/Kconfig
create mode 100644 arch/mips/intel-mips/Makefile
create mode 100644 arch/mips/intel-mips/Platform
create mode 100644 arch/mips/intel-mips/irq.c
create mode 100644 arch/mips/intel-mips/prom.c
create mode 100644 arch/mips/intel-mips/time.c
create mode 100644 drivers/clk/intel/Kconfig
create mode 100644 drivers/clk/intel/Makefile
create mode 100644 drivers/clk/intel/clk-cgu-pll.c
create mode 100644 drivers/clk/intel/clk-cgu-pll.h
create mode 100644 drivers/clk/intel/clk-cgu.c
create mode 100644 drivers/clk/intel/clk-cgu.h
create mode 100644 drivers/clk/intel/clk-grx500.c
create mode 100644 include/dt-bindings/clock/intel,grx500-clk.h
--
2.11.0
^ permalink raw reply
* [PATCH v2 01/18] MIPS: intel: Add initial support for Intel MIPS SoCs
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
James Hogan, linux-kernel, Paul Burton, Ralf Baechle
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
From: Hua Ma <hua.ma@linux.intel.com>
Add initial support for Intel MIPS interAptiv SoCs made by Intel.
This series will add support for the grx500 family.
The series allows booting a minimal system using a initramfs.
Signed-off-by: Hua Ma <hua.ma@linux.intel.com>
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2:
- Remove unused _END macros
- Remove the redundant check and not accurate comments
- Replace the get_counter_resolution function with fixed value 2
- Use obj-y and split into per line per .o
- Add EVA mapping description in code comments
- Remove unused include header file
- Do a clean-up for grx500_defconfig
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 29 ++++
arch/mips/configs/grx500_defconfig | 138 +++++++++++++++++
.../asm/mach-intel-mips/cpu-feature-overrides.h | 61 ++++++++
arch/mips/include/asm/mach-intel-mips/ioremap.h | 39 +++++
arch/mips/include/asm/mach-intel-mips/irq.h | 17 ++
.../asm/mach-intel-mips/kernel-entry-init.h | 104 +++++++++++++
arch/mips/include/asm/mach-intel-mips/spaces.h | 27 ++++
arch/mips/include/asm/mach-intel-mips/war.h | 18 +++
arch/mips/intel-mips/Kconfig | 22 +++
arch/mips/intel-mips/Makefile | 5 +
arch/mips/intel-mips/Platform | 12 ++
arch/mips/intel-mips/irq.c | 35 +++++
arch/mips/intel-mips/prom.c | 172 +++++++++++++++++++++
arch/mips/intel-mips/time.c | 42 +++++
15 files changed, 722 insertions(+)
create mode 100644 arch/mips/configs/grx500_defconfig
create mode 100644 arch/mips/include/asm/mach-intel-mips/cpu-feature-overrides.h
create mode 100644 arch/mips/include/asm/mach-intel-mips/ioremap.h
create mode 100644 arch/mips/include/asm/mach-intel-mips/irq.h
create mode 100644 arch/mips/include/asm/mach-intel-mips/kernel-entry-init.h
create mode 100644 arch/mips/include/asm/mach-intel-mips/spaces.h
create mode 100644 arch/mips/include/asm/mach-intel-mips/war.h
create mode 100644 arch/mips/intel-mips/Kconfig
create mode 100644 arch/mips/intel-mips/Makefile
create mode 100644 arch/mips/intel-mips/Platform
create mode 100644 arch/mips/intel-mips/irq.c
create mode 100644 arch/mips/intel-mips/prom.c
create mode 100644 arch/mips/intel-mips/time.c
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index ac7ad54f984f..bcd647060f3e 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -12,6 +12,7 @@ platforms += cobalt
platforms += dec
platforms += emma
platforms += generic
+platforms += intel-mips
platforms += jazz
platforms += jz4740
platforms += lantiq
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 08c10c518f83..2d34f17f3e24 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -409,6 +409,34 @@ config LANTIQ
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
+config INTEL_MIPS
+ bool "Intel MIPS interAptiv SoC based platforms"
+ select BOOT_RAW
+ select CEVT_R4K
+ select COMMON_CLK
+ select CPU_MIPS32_3_5_EVA
+ select CPU_MIPS32_3_5_FEATURES
+ select CPU_MIPSR2_IRQ_EI
+ select CPU_MIPSR2_IRQ_VI
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select GENERIC_ISA_DMA
+ select IRQ_MIPS_CPU
+ select MFD_CORE
+ select MFD_SYSCON
+ select MIPS_CPU_SCACHE
+ select MIPS_GIC
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS32_R3_5
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_MIPS_CPS
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_ZBOOT
+ select TIMER_OF
+ select USE_OF
+
config LASAT
bool "LASAT Networks platforms"
select CEVT_R4K
@@ -1016,6 +1044,7 @@ source "arch/mips/bcm47xx/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/bmips/Kconfig"
source "arch/mips/generic/Kconfig"
+source "arch/mips/intel-mips/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
diff --git a/arch/mips/configs/grx500_defconfig b/arch/mips/configs/grx500_defconfig
new file mode 100644
index 000000000000..9dd7ba8e1f74
--- /dev/null
+++ b/arch/mips/configs/grx500_defconfig
@@ -0,0 +1,138 @@
+CONFIG_INTEL_MIPS=y
+CONFIG_DTB_INTEL_MIPS_GRX500=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_SCHED_SMT=y
+# CONFIG_MIPS_MT_FPAFF is not set
+CONFIG_MIPS_CPS=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_NR_CPUS=2
+CONFIG_HZ_100=y
+# CONFIG_SECCOMP is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="GRX500"
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_INITRAMFS_COMPRESSION_XZ=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_FHANDLE is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEBUG_FS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_ATM=m
+CONFIG_ATM_BR2684=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+# CONFIG_VT_CONSOLE is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVMEM is not set
+CONFIG_SERIAL_LANTIQ=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+CONFIG_INTEL_CGU_CLK=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_MANDATORY_FILE_LOCKING is not set
+CONFIG_QUOTA=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_CHILDREN=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZ4=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+# CONFIG_RCU_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+# CONFIG_CRYPTO_ECHAINIV is not set
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=y
+CONFIG_IRQ_POLL=y
diff --git a/arch/mips/include/asm/mach-intel-mips/cpu-feature-overrides.h b/arch/mips/include/asm/mach-intel-mips/cpu-feature-overrides.h
new file mode 100644
index 000000000000..ac5f3b943d2a
--- /dev/null
+++ b/arch/mips/include/asm/mach-intel-mips/cpu-feature-overrides.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ * Copyright (C) 2018 Intel Corporation.
+ */
+
+#ifndef __ASM_MACH_INTEL_MIPS_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_INTEL_MIPS_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_divec 1
+
+#define cpu_has_prefetch 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+#define cpu_has_mmips 0
+#define cpu_has_vz 0
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 1
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 1
+#define cpu_has_dsp2 0
+#define cpu_has_mipsmt 1
+
+#define cpu_has_vint 1
+#define cpu_has_veic 0
+
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+#define cpu_has_cm2 1
+#define cpu_has_cm2_l2sync 1
+#define cpu_has_eva 1
+#define cpu_has_tlbinv 1
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_scache_line_size() 32
+
+#endif /* __ASM_MACH_INTEL_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-intel-mips/ioremap.h b/arch/mips/include/asm/mach-intel-mips/ioremap.h
new file mode 100644
index 000000000000..99b20ed0b457
--- /dev/null
+++ b/arch/mips/include/asm/mach-intel-mips/ioremap.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014 Lei Chuanhua <Chuanhua.lei@lantiq.com>
+ * Copyright (C) 2018 Intel Corporation.
+ */
+#ifndef __ASM_MACH_INTEL_MIPS_IOREMAP_H
+#define __ASM_MACH_INTEL_MIPS_IOREMAP_H
+
+#include <linux/types.h>
+
+static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr,
+ phys_addr_t size)
+{
+ return phys_addr;
+}
+
+/*
+ * TOP IO Space definition for SSX7 components /PCIe/ToE/Memcpy
+ * physical 0xa0000000 --> virtual 0xe0000000
+ */
+#define GRX500_TOP_IOREMAP_BASE 0xA0000000
+#define GRX500_TOP_IOREMAP_SIZE 0x20000000
+#define GRX500_TOP_IOREMAP_PHYS_VIRT_OFFSET 0x40000000
+
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
+ unsigned long flags)
+{
+ if (offset >= GRX500_TOP_IOREMAP_BASE &&
+ offset < (GRX500_TOP_IOREMAP_BASE + GRX500_TOP_IOREMAP_SIZE))
+ return (void __iomem *)(unsigned long)
+ (offset + GRX500_TOP_IOREMAP_PHYS_VIRT_OFFSET);
+ return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+ return (unsigned long)addr >= (unsigned long)GRX500_TOP_IOREMAP_BASE;
+}
+#endif /* __ASM_MACH_INTEL_MIPS_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-intel-mips/irq.h b/arch/mips/include/asm/mach-intel-mips/irq.h
new file mode 100644
index 000000000000..12a949084856
--- /dev/null
+++ b/arch/mips/include/asm/mach-intel-mips/irq.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014 Lei Chuanhua <Chuanhua.lei@lantiq.com>
+ * Copyright (C) 2018 Intel Corporation.
+ */
+
+#ifndef __INTEL_MIPS_IRQ_H
+#define __INTEL_MIPS_IRQ_H
+
+#define MIPS_CPU_IRQ_BASE 0
+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
+
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif /* __INTEL_MIPS_IRQ_H */
diff --git a/arch/mips/include/asm/mach-intel-mips/kernel-entry-init.h b/arch/mips/include/asm/mach-intel-mips/kernel-entry-init.h
new file mode 100644
index 000000000000..a30542eca9ec
--- /dev/null
+++ b/arch/mips/include/asm/mach-intel-mips/kernel-entry-init.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Chris Dearman (chris@mips.com)
+ * Leonid Yegoshin (yegoshin@mips.com)
+ * Copyright (C) 2012 Mips Technologies, Inc.
+ * Copyright (C) 2018 Intel Corporation.
+ */
+#ifndef __ASM_MACH_INTEL_MIPS_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_INTEL_MIPS_KERNEL_ENTRY_INIT_H
+/*
+* Prepare segments for EVA boot:
+*
+* This is in case the processor boots in legacy configuration
+* (SI_EVAReset is de-asserted and CONFIG5.K == 0) with 1GB DDR
+*
+* On entry, t1 is loaded with CP0_CONFIG
+*
+* ========================= Mappings =============================
+* Virtual memory Physical memory Mapping
+* 0x00000000 - 0x7fffffff 0x20000000 - 0x9ffffffff MUSUK (kuseg)
+* 0x80000000 - 0x9fffffff 0x80000000 - 0x9ffffffff UK (kseg0)
+* 0xa0000000 - 0xbfffffff 0x20000000 - 0x3ffffffff UK (kseg1)
+* 0xc0000000 - 0xdfffffff - MSK (kseg2)
+* 0xe0000000 - 0xffffffff 0xa0000000 - 0xbfffffff UK 2nd IO
+*
+* user space virtual: 0x00000000 ~ 0x7fffffff
+* kernel space virtual: 0x60000000 ~ 0x9fffffff
+* physical: 0x20000000 ~ 0x5fffffff (flat 1GB)
+* user/kernel space overlapped from 0x60000000 ~ 0x7fffffff (virtual)
+* where physical 0x20000000 ~ 0x2fffffff (cached and uncached)
+* virtual 0xa0000000 ~ 0xafffffff (1st IO space)
+* virtual 0xf0000000 ~ 0xffffffff (2nd IO space)
+*
+* The last 64KB of physical memory are reserved for correct HIGHMEM
+* macros arithmetics.
+* Detailed KSEG and PHYS_OFFSET and PAGE_OFFSEt adaption, refer to
+* asm/mach-intel-mips/spaces.h
+*/
+ .macro platform_eva_init
+
+ .set push
+ .set reorder
+ /*
+ * Get Config.K0 value and use it to program
+ * the segmentation registers
+ */
+ mfc0 t1, CP0_CONFIG
+ andi t1, 0x7 /* CCA */
+ move t2, t1
+ ins t2, t1, 16, 3
+ /* SegCtl0 */
+ li t0, ((MIPS_SEGCFG_UK << MIPS_SEGCFG_AM_SHIFT) | \
+ (5 << MIPS_SEGCFG_PA_SHIFT) | (2 << MIPS_SEGCFG_C_SHIFT) | \
+ (1 << MIPS_SEGCFG_EU_SHIFT)) | \
+ (((MIPS_SEGCFG_MSK << MIPS_SEGCFG_AM_SHIFT) | \
+ (0 << MIPS_SEGCFG_PA_SHIFT) | \
+ (1 << MIPS_SEGCFG_EU_SHIFT)) << 16)
+ ins t0, t1, 16, 3
+ mtc0 t0, $5, 2
+
+ /* SegCtl1 */
+ li t0, ((MIPS_SEGCFG_UK << MIPS_SEGCFG_AM_SHIFT) | \
+ (1 << MIPS_SEGCFG_PA_SHIFT) | (2 << MIPS_SEGCFG_C_SHIFT) | \
+ (1 << MIPS_SEGCFG_EU_SHIFT)) | \
+ (((MIPS_SEGCFG_UK << MIPS_SEGCFG_AM_SHIFT) | \
+ (2 << MIPS_SEGCFG_PA_SHIFT) | \
+ (1 << MIPS_SEGCFG_EU_SHIFT)) << 16)
+ ins t0, t1, 16, 3
+ mtc0 t0, $5, 3
+
+ /* SegCtl2 */
+ li t0, ((MIPS_SEGCFG_MUSUK << MIPS_SEGCFG_AM_SHIFT) | \
+ (0 << MIPS_SEGCFG_PA_SHIFT) | \
+ (1 << MIPS_SEGCFG_EU_SHIFT)) | \
+ (((MIPS_SEGCFG_MUSK << MIPS_SEGCFG_AM_SHIFT) | \
+ (0 << MIPS_SEGCFG_PA_SHIFT)/*| (2 << MIPS_SEGCFG_C_SHIFT)*/ | \
+ (1 << MIPS_SEGCFG_EU_SHIFT)) << 16)
+ ins t0, t1, 0, 3
+ mtc0 t0, $5, 4
+
+ jal mips_ihb
+ mfc0 t0, $16, 5
+ li t2, 0x40000000 /* K bit */
+ or t0, t0, t2
+ mtc0 t0, $16, 5
+ sync
+ jal mips_ihb
+
+ .set pop
+ .endm
+
+ .macro kernel_entry_setup
+ sync
+ ehb
+ platform_eva_init
+ .endm
+
+ .macro smp_slave_setup
+ sync
+ ehb
+ platform_eva_init
+ .endm
+
+#endif /* __ASM_MACH_INTEL_MIPS_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-intel-mips/spaces.h b/arch/mips/include/asm/mach-intel-mips/spaces.h
new file mode 100644
index 000000000000..80e7b09f712c
--- /dev/null
+++ b/arch/mips/include/asm/mach-intel-mips/spaces.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Author: Leonid Yegoshin (yegoshin@mips.com)
+ * Copyright (C) 2012 MIPS Technologies, Inc.
+ * Copyright (C) 2014 Lei Chuanhua <Chuanhua.lei@lantiq.com>
+ * Copyright (C) 2018 Intel Corporation.
+ */
+
+#ifndef _ASM_INTEL_MIPS_SPACES_H
+#define _ASM_INTEL_MIPS_SPACES_H
+
+#define PAGE_OFFSET _AC(0x60000000, UL)
+#define PHYS_OFFSET _AC(0x20000000, UL)
+
+/* No Highmem Support */
+#define HIGHMEM_START _AC(0xffff0000, UL)
+
+#define FIXADDR_TOP ((unsigned long)(long)(int)0xcffe0000)
+
+#define IO_SIZE _AC(0x10000000, UL)
+#define IO_SHIFT _AC(0x10000000, UL)
+
+/* IO space one */
+#define __pa_symbol(x) __pa(x)
+
+#include <asm/mach-generic/spaces.h>
+#endif /* __ASM_INTEL_MIPS_SPACES_H */
diff --git a/arch/mips/include/asm/mach-intel-mips/war.h b/arch/mips/include/asm/mach-intel-mips/war.h
new file mode 100644
index 000000000000..1c95553151e1
--- /dev/null
+++ b/arch/mips/include/asm/mach-intel-mips/war.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MIPS_MACH_INTEL_MIPS_WAR_H
+#define __ASM_MIPS_MACH_INTEL_MIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_INTEL_MIPS_WAR_H */
diff --git a/arch/mips/intel-mips/Kconfig b/arch/mips/intel-mips/Kconfig
new file mode 100644
index 000000000000..35d2ae2b5408
--- /dev/null
+++ b/arch/mips/intel-mips/Kconfig
@@ -0,0 +1,22 @@
+if INTEL_MIPS
+
+choice
+ prompt "Built-in device tree"
+ help
+ Legacy bootloaders do not pass a DTB pointer to the kernel, so
+ if a "wrapper" is not being used, the kernel will need to include
+ a device tree that matches the target board.
+
+ The builtin DTB will only be used if the firmware does not supply
+ a valid DTB.
+
+config DTB_INTEL_MIPS_NONE
+ bool "None"
+
+config DTB_INTEL_MIPS_GRX500
+ bool "Intel MIPS GRX500 Board"
+ select BUILTIN_DTB
+
+endchoice
+
+endif
diff --git a/arch/mips/intel-mips/Makefile b/arch/mips/intel-mips/Makefile
new file mode 100644
index 000000000000..9067d0dd20a0
--- /dev/null
+++ b/arch/mips/intel-mips/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-y += prom.o
+obj-y += irq.o
+obj-y += time.o
diff --git a/arch/mips/intel-mips/Platform b/arch/mips/intel-mips/Platform
new file mode 100644
index 000000000000..3976788698e3
--- /dev/null
+++ b/arch/mips/intel-mips/Platform
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# MIPS SoC platform
+#
+
+platform-$(CONFIG_INTEL_MIPS) += intel-mips/
+cflags-$(CONFIG_INTEL_MIPS) += -I$(srctree)/arch/mips/include/asm/mach-intel-mips
+ifdef CONFIG_EVA
+ load-$(CONFIG_INTEL_MIPS) = 0xffffffff60020000
+else
+ load-$(CONFIG_INTEL_MIPS) = 0xffffffff80020000
+endif
diff --git a/arch/mips/intel-mips/irq.c b/arch/mips/intel-mips/irq.c
new file mode 100644
index 000000000000..b126c98fb391
--- /dev/null
+++ b/arch/mips/intel-mips/irq.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Intel Corporation.
+ */
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+
+void __init arch_init_irq(void)
+{
+ struct device_node *intc_node;
+
+ pr_info("EIC is %s\n", cpu_has_veic ? "on" : "off");
+ pr_info("VINT is %s\n", cpu_has_vint ? "on" : "off");
+
+ intc_node = of_find_compatible_node(NULL, NULL,
+ "mti,cpu-interrupt-controller");
+ if (!cpu_has_veic && !intc_node)
+ mips_cpu_irq_init();
+
+ irqchip_init();
+}
+
+int get_c0_perfcount_int(void)
+{
+ return gic_get_c0_perfcount_int();
+}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+
+unsigned int get_c0_compare_int(void)
+{
+ return gic_get_c0_compare_int();
+}
diff --git a/arch/mips/intel-mips/prom.c b/arch/mips/intel-mips/prom.c
new file mode 100644
index 000000000000..a1b1393c13bc
--- /dev/null
+++ b/arch/mips/intel-mips/prom.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014 Lei Chuanhua <Chuanhua.lei@lantiq.com>
+ * Copyright (C) 2016 Intel Corporation.
+ */
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <asm/dma-coherence.h>
+#include <asm/mips-cps.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+
+#define CPC_BASE_ADDR 0x12310000
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_START 0x10000000
+
+const char *get_system_type(void)
+{
+ return "Intel MIPS interAptiv SoC";
+}
+
+void prom_free_prom_memory(void)
+{
+}
+
+static void __init prom_init_cmdline(void)
+{
+ int i;
+ int argc;
+ char **argv;
+
+ /*
+ * If u-boot pass parameters, it is ok, however, if without u-boot
+ * JTAG or other tool has to reset all register value before it goes
+ * emulation most likely belongs to this category
+ */
+ if (fw_arg0 == 0 || fw_arg1 == 0)
+ return;
+
+ /*
+ * a0: fw_arg0 - the number of string in init cmdline
+ * a1: fw_arg1 - the address of string in init cmdline
+ *
+ * In accordance with the MIPS UHI specification,
+ * the bootloader can pass the following arguments to the kernel:
+ * - $a0: -2.
+ * - $a1: KSEG0 address of the flattened device-tree blob.
+ */
+ if (fw_arg0 == -2)
+ return;
+
+ argc = fw_arg0;
+ argv = (char **)KSEG1ADDR(fw_arg1);
+
+ arcs_cmdline[0] = '\0';
+
+ for (i = 0; i < argc; i++) {
+ char *p = (char *)KSEG1ADDR(argv[i]);
+
+ if (argv[i] && *p) {
+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
+ }
+ }
+}
+
+static int __init plat_enable_iocoherency(void)
+{
+ if (!mips_cps_numiocu(0))
+ return 0;
+
+ /* Nothing special needs to be done to enable coherency */
+ pr_info("Coherence Manager IOCU detected\n");
+ /* Second IOCU for MPE or other master access register */
+ write_gcr_reg0_base(0xa0000000);
+ write_gcr_reg0_mask(0xf8000000 | CM_GCR_REGn_MASK_CMTGT_IOCU1);
+ return 1;
+}
+
+static void __init plat_setup_iocoherency(void)
+{
+ if (plat_enable_iocoherency() &&
+ coherentio == IO_COHERENCE_DISABLED) {
+ pr_info("Hardware DMA cache coherency disabled\n");
+ return;
+ }
+ panic("This kind of IO coherency is not supported!");
+}
+
+static void free_init_pages_eva_intel(void *begin, void *end)
+{
+ free_init_pages("unused kernel", __pa_symbol((unsigned long *)begin),
+ __pa_symbol((unsigned long *)end));
+}
+
+static void plat_early_init_devtree(void)
+{
+ void *dtb = NULL;
+
+ /*
+ * Load the builtin devicetree. This causes the chosen node to be
+ * parsed resulting in our memory appearing
+ */
+ if (fw_passed_dtb) /* used by CONFIG_MIPS_APPENDED_RAW_DTB as well */
+ dtb = (void *)fw_passed_dtb;
+ else if (__dtb_start != __dtb_end)
+ dtb = (void *)__dtb_start;
+ else
+ panic("no dtb found");
+
+ if (dtb)
+ __dt_setup_arch(dtb);
+}
+
+void __init plat_mem_setup(void)
+{
+ ioport_resource.start = IOPORT_RESOURCE_START;
+ ioport_resource.end = ~0UL; /* No limit */
+ iomem_resource.start = IOMEM_RESOURCE_START;
+ iomem_resource.end = ~0UL; /* No limit */
+
+ set_io_port_base((unsigned long)KSEG1);
+
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+
+ plat_early_init_devtree();
+ plat_setup_iocoherency();
+
+ if (IS_ENABLED(CONFIG_EVA))
+ free_init_pages_eva = free_init_pages_eva_intel;
+ else
+ free_init_pages_eva = 0;
+}
+
+void __init device_tree_init(void)
+{
+ unflatten_and_copy_device_tree();
+}
+
+phys_addr_t mips_cpc_default_phys_base(void)
+{
+ return CPC_BASE_ADDR;
+}
+
+void __init prom_init(void)
+{
+ prom_init_cmdline();
+
+ mips_cpc_probe();
+
+ if (!register_cps_smp_ops())
+ return;
+
+ if (!register_cmp_smp_ops())
+ return;
+
+ if (!register_vsmp_smp_ops())
+ return;
+}
+
+static int __init plat_publish_devices(void)
+{
+ if (!of_have_populated_dt())
+ return 0;
+ return of_platform_populate(NULL, of_default_bus_match_table, NULL,
+ NULL);
+}
+arch_initcall(plat_publish_devices);
diff --git a/arch/mips/intel-mips/time.c b/arch/mips/intel-mips/time.c
new file mode 100644
index 000000000000..deb462c21df6
--- /dev/null
+++ b/arch/mips/intel-mips/time.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Intel Corporation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/of.h>
+
+#include <asm/time.h>
+
+void __init plat_time_init(void)
+{
+ unsigned long cpuclk;
+ struct device_node *np;
+ struct clk *clk;
+
+ of_clk_init(NULL);
+
+ np = of_get_cpu_node(0, NULL);
+ if (!np) {
+ pr_err("Failed to get CPU node\n");
+ return;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+
+ cpuclk = clk_get_rate(clk);
+ /* the chip resolution is the half of the clock*/
+ mips_hpt_frequency = cpuclk / 2;
+ clk_put(clk);
+
+ write_c0_compare(read_c0_count());
+ pr_info("CPU Clock: %ldHz mips_hpt_frequency %dHz\n",
+ cpuclk, mips_hpt_frequency);
+ timer_probe();
+}
--
2.11.0
^ permalink raw reply related
* [PATCH v2 02/18] clk: intel: Add clock driver for Intel MIPS SoCs
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Michael Turquette, Stephen Boyd, linux-kernel, Rob Herring,
Mark Rutland
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
From: Yixin Zhu <yixin.zhu@linux.intel.com>
This driver provides PLL clock registration as well as various clock
branches, e.g. MUX clock, gate clock, divider clock and so on.
PLLs that provide clock to DDR, CPU and peripherals are shown below:
+---------+
|--->| LCPLL3 0|--PCIe clk-->
XO | +---------+
+-----------|
| +---------+
| | 3|--PAE clk-->
|--->| PLL0B 2|--GSWIP clk-->
| | 1|--DDR clk-->DDR PHY clk-->
| | 0|--CPU1 clk--+ +-----+
| +---------+ |--->0 |
| | MUX |--CPU clk-->
| +---------+ |--->1 |
| | 0|--CPU0 clk--+ +-----+
|--->| PLLOA 1|--SSX4 clk-->
| 2|--NGI clk-->
| 3|--CBM clk-->
+---------+
Signed-off-by: Yixin Zhu <yixin.zhu@linux.intel.com>
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2:
- Rewrite clock driver, add platform clock description details in
clock driver.
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 3 +
drivers/clk/intel/Kconfig | 20 ++
drivers/clk/intel/Makefile | 7 +
drivers/clk/intel/clk-cgu-pll.c | 166 ++++++++++
drivers/clk/intel/clk-cgu-pll.h | 34 ++
drivers/clk/intel/clk-cgu.c | 470 +++++++++++++++++++++++++++
drivers/clk/intel/clk-cgu.h | 259 +++++++++++++++
drivers/clk/intel/clk-grx500.c | 168 ++++++++++
include/dt-bindings/clock/intel,grx500-clk.h | 69 ++++
10 files changed, 1197 insertions(+)
create mode 100644 drivers/clk/intel/Kconfig
create mode 100644 drivers/clk/intel/Makefile
create mode 100644 drivers/clk/intel/clk-cgu-pll.c
create mode 100644 drivers/clk/intel/clk-cgu-pll.h
create mode 100644 drivers/clk/intel/clk-cgu.c
create mode 100644 drivers/clk/intel/clk-cgu.h
create mode 100644 drivers/clk/intel/clk-grx500.c
create mode 100644 include/dt-bindings/clock/intel,grx500-clk.h
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 721572a8c429..5e0c1597b0d3 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -281,6 +281,7 @@ source "drivers/clk/actions/Kconfig"
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
source "drivers/clk/imgtec/Kconfig"
+source "drivers/clk/intel/Kconfig"
source "drivers/clk/keystone/Kconfig"
source "drivers/clk/mediatek/Kconfig"
source "drivers/clk/meson/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 0bb25dd009d1..d929ca4607cf 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -72,6 +72,9 @@ obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-y += imgtec/
obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_MACH_INGENIC) += ingenic/
+ifeq ($(CONFIG_COMMON_CLK), y)
+obj-y +=intel/
+endif
obj-$(CONFIG_ARCH_KEYSTONE) += keystone/
obj-$(CONFIG_MACH_LOONGSON32) += loongson1/
obj-y += mediatek/
diff --git a/drivers/clk/intel/Kconfig b/drivers/clk/intel/Kconfig
new file mode 100644
index 000000000000..c7d3fb1721fa
--- /dev/null
+++ b/drivers/clk/intel/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+config INTEL_CGU_CLK
+ depends on COMMON_CLK
+ depends on INTEL_MIPS || COMPILE_TEST
+ select MFD_SYSCON
+ bool "Intel clock controller support"
+ help
+ This driver support Intel CGU (Clock Generation Unit).
+
+choice
+ prompt "SoC platform selection"
+ depends on INTEL_CGU_CLK
+ default INTEL_GRX500_CGU_CLK
+
+config INTEL_GRX500_CGU_CLK
+ bool "GRX500 CLK"
+ help
+ Clock driver of GRX500 platform.
+
+endchoice
diff --git a/drivers/clk/intel/Makefile b/drivers/clk/intel/Makefile
new file mode 100644
index 000000000000..16a0138e52c2
--- /dev/null
+++ b/drivers/clk/intel/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for intel specific clk
+
+obj-$(CONFIG_INTEL_CGU_CLK) += clk-cgu.o clk-cgu-pll.o
+ifneq ($(CONFIG_INTEL_GRX500_CGU_CLK),)
+ obj-y += clk-grx500.o
+endif
diff --git a/drivers/clk/intel/clk-cgu-pll.c b/drivers/clk/intel/clk-cgu-pll.c
new file mode 100644
index 000000000000..20759bc27e95
--- /dev/null
+++ b/drivers/clk/intel/clk-cgu-pll.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Intel Corporation.
+ * Zhu YiXin <Yixin.zhu@intel.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "clk-cgu-pll.h"
+#include "clk-cgu.h"
+
+#define to_intel_clk_pll(_hw) container_of(_hw, struct intel_clk_pll, hw)
+
+/*
+ * Calculate formula:
+ * rate = (prate * mult + (prate * frac) / frac_div) / div
+ */
+static unsigned long
+intel_pll_calc_rate(unsigned long prate, unsigned int mult,
+ unsigned int div, unsigned int frac,
+ unsigned int frac_div)
+{
+ u64 crate, frate, rate64;
+
+ rate64 = prate;
+ crate = rate64 * mult;
+
+ if (frac) {
+ frate = rate64 * frac;
+ do_div(frate, frac_div);
+ crate += frate;
+ }
+ do_div(crate, div);
+
+ return (unsigned long)crate;
+}
+
+static void
+grx500_pll_get_params(struct intel_clk_pll *pll, unsigned int *mult,
+ unsigned int *frac)
+{
+ *mult = intel_get_clk_val(pll->map, pll->reg, 2, 7);
+ *frac = intel_get_clk_val(pll->map, pll->reg, 9, 21);
+}
+
+static int intel_wait_pll_lock(struct intel_clk_pll *pll, int bit_idx)
+{
+ unsigned int val;
+
+ return regmap_read_poll_timeout(pll->map, pll->reg, val,
+ val & BIT(bit_idx), 10, 1000);
+}
+
+static unsigned long
+intel_grx500_pll_recalc_rate(struct clk_hw *hw, unsigned long prate)
+{
+ struct intel_clk_pll *pll = to_intel_clk_pll(hw);
+ unsigned int mult, frac;
+
+ grx500_pll_get_params(pll, &mult, &frac);
+
+ return intel_pll_calc_rate(prate, mult, 1, frac, BIT(20));
+}
+
+static int intel_grx500_pll_is_enabled(struct clk_hw *hw)
+{
+ struct intel_clk_pll *pll = to_intel_clk_pll(hw);
+
+ if (intel_wait_pll_lock(pll, 1)) {
+ pr_err("%s: pll: %s is not locked!\n",
+ __func__, clk_hw_get_name(hw));
+ return 0;
+ }
+
+ return intel_get_clk_val(pll->map, pll->reg, 1, 1);
+}
+
+const static struct clk_ops intel_grx500_pll_ops = {
+ .recalc_rate = intel_grx500_pll_recalc_rate,
+ .is_enabled = intel_grx500_pll_is_enabled,
+};
+
+static struct clk
+*intel_clk_register_pll(struct intel_clk_provider *ctx,
+ enum intel_pll_type type, const char *cname,
+ const char *const *pname, u8 num_parents,
+ unsigned long flags, unsigned int reg,
+ const struct intel_pll_rate_table *table,
+ unsigned int mult, unsigned int div, unsigned int frac)
+{
+ struct clk_init_data init;
+ struct intel_clk_pll *pll;
+ struct clk_hw *hw;
+ int ret, i;
+
+ if (type != pll_grx500) {
+ pr_err("%s: pll type %d not supported!\n",
+ __func__, type);
+ return ERR_PTR(-EINVAL);
+ }
+ init.name = cname;
+ init.ops = &intel_grx500_pll_ops;
+ init.flags = CLK_IS_BASIC;
+ init.parent_names = pname;
+ init.num_parents = num_parents;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+ pll->map = ctx->map;
+ pll->reg = reg;
+ pll->flags = flags;
+ pll->mult = mult;
+ pll->div = div;
+ pll->frac = frac;
+ pll->hw.init = &init;
+ if (table) {
+ for (i = 0; table[i].rate != 0; i++)
+ ;
+ pll->table_sz = i;
+ pll->rate_table = kmemdup(table, i * sizeof(table[0]),
+ GFP_KERNEL);
+ if (!pll->rate_table) {
+ ret = -ENOMEM;
+ goto err_free_pll;
+ }
+ }
+ hw = &pll->hw;
+ ret = clk_hw_register(NULL, hw);
+ if (ret)
+ goto err_free_pll;
+
+ return hw->clk;
+
+err_free_pll:
+ kfree(pll);
+ return ERR_PTR(ret);
+}
+
+void intel_clk_register_plls(struct intel_clk_provider *ctx,
+ struct intel_pll_clk *list, unsigned int nr_clk)
+{
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < nr_clk; i++, list++) {
+ clk = intel_clk_register_pll(ctx, list->type, list->name,
+ list->parent_names, list->num_parents,
+ list->flags, list->reg, list->rate_table,
+ list->mult, list->div, list->frac);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register pll: %s\n",
+ __func__, list->name);
+ continue;
+ }
+
+ intel_clk_add_lookup(ctx, clk, list->id);
+ }
+}
diff --git a/drivers/clk/intel/clk-cgu-pll.h b/drivers/clk/intel/clk-cgu-pll.h
new file mode 100644
index 000000000000..3e7cff1d5e16
--- /dev/null
+++ b/drivers/clk/intel/clk-cgu-pll.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright(c) 2018 Intel Corporation.
+ * Zhu YiXin <Yixin.zhu@intel.com>
+ */
+
+#ifndef __INTEL_CLK_PLL_H
+#define __INTEL_CLK_PLL_H
+
+enum intel_pll_type {
+ pll_grx500,
+};
+
+struct intel_pll_rate_table {
+ unsigned long prate;
+ unsigned long rate;
+ unsigned int mult;
+ unsigned int div;
+ unsigned int frac;
+};
+
+struct intel_clk_pll {
+ struct clk_hw hw;
+ struct regmap *map;
+ unsigned int reg;
+ unsigned long flags;
+ unsigned int mult;
+ unsigned int div;
+ unsigned int frac;
+ unsigned int table_sz;
+ const struct intel_pll_rate_table *rate_table;
+};
+
+#endif /* __INTEL_CLK_PLL_H */
diff --git a/drivers/clk/intel/clk-cgu.c b/drivers/clk/intel/clk-cgu.c
new file mode 100644
index 000000000000..10cacbe0fbcd
--- /dev/null
+++ b/drivers/clk/intel/clk-cgu.c
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Intel Corporation.
+ * Zhu YiXin <Yixin.zhu@intel.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "clk-cgu-pll.h"
+#include "clk-cgu.h"
+
+#define GATE_HW_REG_STAT(reg) (reg)
+#define GATE_HW_REG_EN(reg) ((reg) + 0x4)
+#define GATE_HW_REG_DIS(reg) ((reg) + 0x8)
+
+#define to_intel_clk_mux(_hw) container_of(_hw, struct intel_clk_mux, hw)
+#define to_intel_clk_divider(_hw) \
+ container_of(_hw, struct intel_clk_divider, hw)
+#define to_intel_clk_gate(_hw) container_of(_hw, struct intel_clk_gate, hw)
+
+void intel_set_clk_val(struct regmap *map, u32 reg, u8 shift,
+ u8 width, u32 set_val)
+{
+ u32 mask = GENMASK(width + shift, shift);
+
+ regmap_update_bits(map, reg, mask, set_val << shift);
+}
+
+u32 intel_get_clk_val(struct regmap *map, u32 reg, u8 shift,
+ u8 width)
+{
+ u32 val;
+
+ if (regmap_read(map, reg, &val)) {
+ WARN_ONCE(1, "Failed to read clk reg: 0x%x\n", reg);
+ return 0;
+ }
+ val >>= shift;
+ val &= BIT(width) - 1;
+
+ return val;
+}
+
+void intel_clk_add_lookup(struct intel_clk_provider *ctx,
+ struct clk *clk, unsigned int id)
+{
+ pr_debug("Add clk: %s, id: %u\n", __clk_get_name(clk), id);
+ if (ctx->clk_data.clks && id)
+ ctx->clk_data.clks[id] = clk;
+}
+
+static struct clk
+*intel_clk_register_fixed(struct intel_clk_provider *ctx,
+ struct intel_clk_branch *list)
+{
+ if (list->div_flags & CLOCK_FLAG_VAL_INIT)
+ intel_set_clk_val(ctx->map, list->div_off, list->div_shift,
+ list->div_width, list->div_val);
+
+ return clk_register_fixed_rate(NULL, list->name, list->parent_names[0],
+ list->flags, list->mux_flags);
+}
+
+static u8 intel_clk_mux_get_parent(struct clk_hw *hw)
+{
+ struct intel_clk_mux *mux = to_intel_clk_mux(hw);
+ u32 val;
+
+ val = intel_get_clk_val(mux->map, mux->reg, mux->shift, mux->width);
+ return clk_mux_val_to_index(hw, NULL, mux->flags, val);
+}
+
+static int intel_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct intel_clk_mux *mux = to_intel_clk_mux(hw);
+ u32 val;
+
+ val = clk_mux_index_to_val(NULL, mux->flags, index);
+ intel_set_clk_val(mux->map, mux->reg, mux->shift, mux->width, val);
+
+ return 0;
+}
+
+static int intel_clk_mux_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct intel_clk_mux *mux = to_intel_clk_mux(hw);
+
+ return clk_mux_determine_rate_flags(hw, req, mux->flags);
+}
+
+const static struct clk_ops intel_clk_mux_ops = {
+ .get_parent = intel_clk_mux_get_parent,
+ .set_parent = intel_clk_mux_set_parent,
+ .determine_rate = intel_clk_mux_determine_rate,
+};
+
+static struct clk
+*intel_clk_register_mux(struct intel_clk_provider *ctx,
+ struct intel_clk_branch *list)
+{
+ struct clk_init_data init;
+ struct clk_hw *hw;
+ struct intel_clk_mux *mux;
+ u32 reg = list->mux_off;
+ u8 shift = list->mux_shift;
+ u8 width = list->mux_width;
+ unsigned long cflags = list->mux_flags;
+ int ret;
+
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = list->name;
+ init.ops = &intel_clk_mux_ops;
+ init.flags = list->flags | CLK_IS_BASIC;
+ init.parent_names = list->parent_names;
+ init.num_parents = list->num_parents;
+
+ mux->map = ctx->map;
+ mux->reg = reg;
+ mux->shift = shift;
+ mux->width = width;
+ mux->flags = cflags;
+ mux->hw.init = &init;
+
+ hw = &mux->hw;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ kfree(mux);
+ return ERR_PTR(ret);
+ }
+
+ if (cflags & CLOCK_FLAG_VAL_INIT)
+ intel_set_clk_val(ctx->map, reg, shift, width, list->mux_val);
+
+ return hw->clk;
+}
+
+static unsigned long
+intel_clk_divider_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct intel_clk_divider *divider = to_intel_clk_divider(hw);
+ unsigned int val;
+
+ val = intel_get_clk_val(divider->map, divider->reg,
+ divider->shift, divider->width);
+ return divider_recalc_rate(hw, parent_rate, val, divider->table,
+ divider->flags, divider->width);
+}
+
+static long
+intel_clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct intel_clk_divider *divider = to_intel_clk_divider(hw);
+
+ return divider_round_rate(hw, rate, prate, divider->table,
+ divider->width, divider->flags);
+}
+
+static int
+intel_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long prate)
+{
+ struct intel_clk_divider *divider = to_intel_clk_divider(hw);
+ int value;
+
+ value = divider_get_val(rate, prate, divider->table,
+ divider->width, divider->flags);
+ if (value < 0)
+ return value;
+
+ intel_set_clk_val(divider->map, divider->reg,
+ divider->shift, divider->width, value);
+
+ return 0;
+}
+
+const static struct clk_ops intel_clk_divider_ops = {
+ .recalc_rate = intel_clk_divider_recalc_rate,
+ .round_rate = intel_clk_divider_round_rate,
+ .set_rate = intel_clk_divider_set_rate,
+};
+
+static struct clk
+*intel_clk_register_divider(struct intel_clk_provider *ctx,
+ struct intel_clk_branch *list)
+{
+ struct clk_init_data init;
+ struct clk_hw *hw;
+ struct intel_clk_divider *div;
+ u32 reg = list->div_off;
+ u8 shift = list->div_shift;
+ u8 width = list->div_width;
+ unsigned long cflags = list->div_flags;
+ int ret;
+
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = list->name;
+ init.ops = &intel_clk_divider_ops;
+ init.flags = list->flags | CLK_IS_BASIC;
+ init.parent_names = &list->parent_names[0];
+ init.num_parents = 1;
+
+ div->map = ctx->map;
+ div->reg = reg;
+ div->shift = shift;
+ div->width = width;
+ div->flags = cflags;
+ div->table = list->div_table;
+ div->hw.init = &init;
+
+ hw = &div->hw;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ pr_err("%s: register clk: %s failed!\n",
+ __func__, list->name);
+ kfree(div);
+ return ERR_PTR(ret);
+ }
+
+ if (cflags & CLOCK_FLAG_VAL_INIT)
+ intel_set_clk_val(ctx->map, reg, shift, width, list->div_val);
+
+ return hw->clk;
+}
+
+static struct clk
+*intel_clk_register_fixed_factor(struct intel_clk_provider *ctx,
+ struct intel_clk_branch *list)
+{
+ struct clk_hw *hw;
+
+ hw = clk_hw_register_fixed_factor(NULL, list->name,
+ list->parent_names[0], list->flags,
+ list->mult, list->div);
+ if (IS_ERR(hw))
+ return ERR_CAST(hw);
+
+ if (list->div_flags & CLOCK_FLAG_VAL_INIT)
+ intel_set_clk_val(ctx->map, list->div_off, list->div_shift,
+ list->div_width, list->div_val);
+
+ return hw->clk;
+}
+
+static int
+intel_clk_gate_enable(struct clk_hw *hw)
+{
+ struct intel_clk_gate *gate = to_intel_clk_gate(hw);
+ unsigned int reg;
+
+ if (gate->flags & GATE_CLK_VT) {
+ gate->reg = 1;
+ return 0;
+ }
+
+ if (gate->flags & GATE_CLK_HW) {
+ reg = GATE_HW_REG_EN(gate->reg);
+ } else if (gate->flags & GATE_CLK_SW) {
+ reg = gate->reg;
+ } else {
+ pr_err("%s: gate clk: %s: flag 0x%lx not supported!\n",
+ __func__, clk_hw_get_name(hw), gate->flags);
+ return 0;
+ }
+
+ intel_set_clk_val(gate->map, reg, gate->shift, 1, 1);
+
+ return 0;
+}
+
+static void
+intel_clk_gate_disable(struct clk_hw *hw)
+{
+ struct intel_clk_gate *gate = to_intel_clk_gate(hw);
+ unsigned int reg;
+ unsigned int set;
+
+ if (gate->flags & GATE_CLK_VT) {
+ gate->reg = 0;
+ return;
+ }
+
+ if (gate->flags & GATE_CLK_HW) {
+ reg = GATE_HW_REG_DIS(gate->reg);
+ set = 1;
+ } else if (gate->flags & GATE_CLK_SW) {
+ reg = gate->reg;
+ set = 0;
+ } else {
+ pr_err("%s: gate clk: %s: flag 0x%lx not supported!\n",
+ __func__, clk_hw_get_name(hw), gate->flags);
+ return;
+ }
+
+ intel_set_clk_val(gate->map, reg, gate->shift, 1, set);
+}
+
+static int
+intel_clk_gate_is_enabled(struct clk_hw *hw)
+{
+ struct intel_clk_gate *gate = to_intel_clk_gate(hw);
+ unsigned int reg;
+
+ if (gate->flags & GATE_CLK_VT)
+ return gate->reg;
+
+ if (gate->flags & GATE_CLK_HW) {
+ reg = GATE_HW_REG_STAT(gate->reg);
+ } else if (gate->flags & GATE_CLK_SW) {
+ reg = gate->reg;
+ } else {
+ pr_err("%s: gate clk: %s: flag 0x%lx not supported!\n",
+ __func__, clk_hw_get_name(hw), gate->flags);
+ return 0;
+ }
+
+ return intel_get_clk_val(gate->map, reg, gate->shift, 1);
+}
+
+const static struct clk_ops intel_clk_gate_ops = {
+ .enable = intel_clk_gate_enable,
+ .disable = intel_clk_gate_disable,
+ .is_enabled = intel_clk_gate_is_enabled,
+};
+
+static struct clk
+*intel_clk_register_gate(struct intel_clk_provider *ctx,
+ struct intel_clk_branch *list)
+{
+ struct clk_init_data init;
+ struct clk_hw *hw;
+ struct intel_clk_gate *gate;
+ u32 reg = list->gate_off;
+ u8 shift = list->gate_shift;
+ unsigned long cflags = list->gate_flags;
+ const char *pname = list->parent_names[0];
+ int ret;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = list->name;
+ init.ops = &intel_clk_gate_ops;
+ init.flags = list->flags | CLK_IS_BASIC;
+ init.parent_names = pname ? &pname : NULL;
+ init.num_parents = pname ? 1 : 0;
+
+ gate->map = ctx->map;
+ gate->reg = reg;
+ gate->shift = shift;
+ gate->flags = cflags;
+ gate->hw.init = &init;
+
+ hw = &gate->hw;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ kfree(gate);
+ return ERR_PTR(ret);
+ }
+
+ if (cflags & CLOCK_FLAG_VAL_INIT)
+ intel_set_clk_val(ctx->map, reg, shift, 1, list->gate_val);
+
+ return hw->clk;
+}
+
+void intel_clk_register_branches(struct intel_clk_provider *ctx,
+ struct intel_clk_branch *list,
+ unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ switch (list->type) {
+ case intel_clk_fixed:
+ clk = intel_clk_register_fixed(ctx, list);
+ break;
+ case intel_clk_mux:
+ clk = intel_clk_register_mux(ctx, list);
+ break;
+ case intel_clk_divider:
+ clk = intel_clk_register_divider(ctx, list);
+ break;
+ case intel_clk_fixed_factor:
+ clk = intel_clk_register_fixed_factor(ctx, list);
+ break;
+ case intel_clk_gate:
+ clk = intel_clk_register_gate(ctx, list);
+ break;
+ default:
+ pr_err("%s: type: %u not supported!\n",
+ __func__, list->type);
+ return;
+ }
+
+ if (IS_ERR(clk)) {
+ pr_err("%s: register clk: %s, type: %u failed!\n",
+ __func__, list->name, list->type);
+ return;
+ }
+
+ intel_clk_add_lookup(ctx, clk, list->id);
+ }
+}
+
+struct intel_clk_provider * __init
+intel_clk_init(struct device_node *np, struct regmap *map, unsigned int nr_clks)
+{
+ struct intel_clk_provider *ctx;
+ struct clk **clks;
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return ERR_PTR(-ENOMEM);
+
+ clks = kcalloc(nr_clks, sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ kfree(ctx);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ memset_p((void **)clks, ERR_PTR(-ENOENT), nr_clks);
+ ctx->map = map;
+ ctx->clk_data.clks = clks;
+ ctx->clk_data.clk_num = nr_clks;
+ ctx->np = np;
+
+ return ctx;
+}
+
+void __init intel_clk_register_osc(struct intel_clk_provider *ctx,
+ struct intel_osc_clk *osc,
+ unsigned int nr_clks)
+{
+ u32 freq;
+ struct clk *clk;
+ int idx;
+
+ for (idx = 0; idx < nr_clks; idx++, osc++) {
+ if (!osc->dt_freq ||
+ of_property_read_u32(ctx->np, osc->dt_freq, &freq))
+ freq = osc->def_rate;
+
+ clk = clk_register_fixed_rate(NULL, osc->name, NULL, 0, freq);
+ if (IS_ERR(clk)) {
+ pr_err("%s: Failed to register clock: %s\n",
+ __func__, osc->name);
+ return;
+ }
+
+ intel_clk_add_lookup(ctx, clk, osc->id);
+ }
+}
diff --git a/drivers/clk/intel/clk-cgu.h b/drivers/clk/intel/clk-cgu.h
new file mode 100644
index 000000000000..6dc4e45fc499
--- /dev/null
+++ b/drivers/clk/intel/clk-cgu.h
@@ -0,0 +1,259 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright(c) 2018 Intel Corporation.
+ * Zhu YiXin <Yixin.zhu@intel.com>
+ */
+
+#ifndef __INTEL_CLK_H
+#define __INTEL_CLK_H
+
+#define PNAME(x) static const char *const x[] __initconst
+
+struct intel_clk_mux {
+ struct clk_hw hw;
+ struct regmap *map;
+ unsigned int reg;
+ u8 shift;
+ u8 width;
+ unsigned long flags;
+};
+
+struct intel_clk_divider {
+ struct clk_hw hw;
+ struct regmap *map;
+ unsigned int reg;
+ u8 shift;
+ u8 width;
+ unsigned long flags;
+ const struct clk_div_table *table;
+};
+
+struct intel_clk_gate {
+ struct clk_hw hw;
+ struct regmap *map;
+ unsigned int reg;
+ u8 shift;
+ unsigned long flags;
+};
+
+enum intel_clk_type {
+ intel_clk_fixed,
+ intel_clk_mux,
+ intel_clk_divider,
+ intel_clk_fixed_factor,
+ intel_clk_gate,
+};
+
+/**
+ * struct intel_clk_provider
+ * @map: regmap type base address for register.
+ * @np: device node
+ * @clk_data: array of hw clocks and clk number.
+ */
+struct intel_clk_provider {
+ struct regmap *map;
+ struct device_node *np;
+ struct clk_onecell_data clk_data;
+};
+
+/**
+ * struct intel_pll_clk
+ * @id: plaform specific id of the clock.
+ * @name: name of this pll clock.
+ * @parent_names: name of the parent clock.
+ * @num_parents: number of parents.
+ * @flags: optional flags for basic clock.
+ * @type: platform type of pll.
+ * @reg: offset of the register.
+ * @mult: init value of mulitplier.
+ * @div: init value of divider.
+ * @frac: init value of fraction.
+ * @rate_table: table of pll clock rate.
+ */
+struct intel_pll_clk {
+ unsigned int id;
+ const char *name;
+ const char *const *parent_names;
+ u8 num_parents;
+ unsigned long flags;
+ enum intel_pll_type type;
+ int reg;
+ unsigned int mult;
+ unsigned int div;
+ unsigned int frac;
+ const struct intel_pll_rate_table *rate_table;
+};
+
+#define INTEL_PLL(_id, _type, _name, _pnames, _flags, \
+ _reg, _rtable, _mult, _div, _frac) \
+ { \
+ .id = _id, \
+ .type = _type, \
+ .name = _name, \
+ .parent_names = _pnames, \
+ .num_parents = ARRAY_SIZE(_pnames), \
+ .flags = _flags, \
+ .reg = _reg, \
+ .rate_table = _rtable, \
+ .mult = _mult, \
+ .div = _div, \
+ .frac = _frac \
+ }
+
+/**
+ * struct intel_osc_clk
+ * @id: platform specific id of the clock.
+ * @name: name of the osc clock.
+ * @dt_freq: frequency node name in device tree.
+ * @def_rate: default rate of the osc clock.
+ * @flags: optional flags for basic clock.
+ */
+struct intel_osc_clk {
+ unsigned int id;
+ const char *name;
+ const char *dt_freq;
+ const u32 def_rate;
+};
+
+#define INTEL_OSC(_id, _name, _freq, _rate) \
+ { \
+ .id = _id, \
+ .name = _name, \
+ .dt_freq = _freq, \
+ .def_rate = _rate, \
+ }
+
+struct intel_clk_branch {
+ unsigned int id;
+ enum intel_clk_type type;
+ const char *name;
+ const char *const *parent_names;
+ u8 num_parents;
+ unsigned long flags;
+ unsigned int mux_off;
+ u8 mux_shift;
+ u8 mux_width;
+ unsigned long mux_flags;
+ unsigned int mux_val;
+ unsigned int div_off;
+ u8 div_shift;
+ u8 div_width;
+ unsigned long div_flags;
+ unsigned int div_val;
+ const struct clk_div_table *div_table;
+ unsigned int gate_off;
+ u8 gate_shift;
+ unsigned long gate_flags;
+ unsigned int gate_val;
+ unsigned int mult;
+ unsigned int div;
+};
+
+/* clock flags definition */
+#define CLOCK_FLAG_VAL_INIT BIT(16)
+#define GATE_CLK_HW BIT(17)
+#define GATE_CLK_SW BIT(18)
+#define GATE_CLK_VT BIT(19)
+
+#define INTEL_MUX(_id, _name, _pname, _f, _reg, \
+ _shift, _width, _cf, _v) \
+ { \
+ .id = _id, \
+ .type = intel_clk_mux, \
+ .name = _name, \
+ .parent_names = _pname, \
+ .num_parents = ARRAY_SIZE(_pname), \
+ .flags = _f, \
+ .mux_off = _reg, \
+ .mux_shift = _shift, \
+ .mux_width = _width, \
+ .mux_flags = _cf, \
+ .mux_val = _v, \
+ }
+
+#define INTEL_DIV(_id, _name, _pname, _f, _reg, \
+ _shift, _width, _cf, _v, _dtable) \
+ { \
+ .id = _id, \
+ .type = intel_clk_divider, \
+ .name = _name, \
+ .parent_names = (const char *[]) { _pname }, \
+ .num_parents = 1, \
+ .flags = _f, \
+ .div_off = _reg, \
+ .div_shift = _shift, \
+ .div_width = _width, \
+ .div_flags = _cf, \
+ .div_val = _v, \
+ .div_table = _dtable, \
+ }
+
+#define INTEL_GATE(_id, _name, _pname, _f, _reg, \
+ _shift, _cf, _v) \
+ { \
+ .id = _id, \
+ .type = intel_clk_gate, \
+ .name = _name, \
+ .parent_names = (const char *[]) { _pname }, \
+ .num_parents = !_pname ? 0 : 1, \
+ .flags = _f, \
+ .gate_off = _reg, \
+ .gate_shift = _shift, \
+ .gate_flags = _cf, \
+ .gate_val = _v, \
+ }
+
+#define INTEL_FIXED(_id, _name, _pname, _f, _reg, \
+ _shift, _width, _cf, _freq, _v) \
+ { \
+ .id = _id, \
+ .type = intel_clk_fixed, \
+ .name = _name, \
+ .parent_names = (const char *[]) { _pname }, \
+ .num_parents = !_pname ? 0 : 1, \
+ .flags = _f, \
+ .div_off = _reg, \
+ .div_shift = _shift, \
+ .div_width = _width, \
+ .div_flags = _cf, \
+ .div_val = _v, \
+ .mux_flags = _freq, \
+ }
+
+#define INTEL_FIXED_FACTOR(_id, _name, _pname, _f, _reg, \
+ _shift, _width, _cf, _v, _m, _d) \
+ { \
+ .id = _id, \
+ .type = intel_clk_fixed_factor, \
+ .name = _name, \
+ .parent_names = (const char *[]) { _pname }, \
+ .num_parents = 1, \
+ .flags = _f, \
+ .div_off = _reg, \
+ .div_shift = _shift, \
+ .div_width = _width, \
+ .div_flags = _cf, \
+ .div_val = _v, \
+ .mult = _m, \
+ .div = _d, \
+ }
+
+void intel_set_clk_val(struct regmap *map, u32 reg, u8 shift,
+ u8 width, u32 set_val);
+u32 intel_get_clk_val(struct regmap *map, u32 reg, u8 shift, u8 width);
+void intel_clk_add_lookup(struct intel_clk_provider *ctx,
+ struct clk *clk, unsigned int id);
+void __init intel_clk_of_add_provider(struct device_node *np,
+ struct intel_clk_provider *ctx);
+struct intel_clk_provider * __init
+intel_clk_init(struct device_node *np, struct regmap *map,
+ unsigned int nr_clks);
+void __init intel_clk_register_osc(struct intel_clk_provider *ctx,
+ struct intel_osc_clk *osc,
+ unsigned int nr_clks);
+void intel_clk_register_branches(struct intel_clk_provider *ctx,
+ struct intel_clk_branch *list,
+ unsigned int nr_clk);
+void intel_clk_register_plls(struct intel_clk_provider *ctx,
+ struct intel_pll_clk *list, unsigned int nr_clk);
+#endif /* __INTEL_CLK_H */
diff --git a/drivers/clk/intel/clk-grx500.c b/drivers/clk/intel/clk-grx500.c
new file mode 100644
index 000000000000..5c2546f82579
--- /dev/null
+++ b/drivers/clk/intel/clk-grx500.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Intel Corporation.
+ * Zhu YiXin <Yixin.zhu@intel.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include <dt-bindings/clock/intel,grx500-clk.h>
+
+#include "clk-cgu-pll.h"
+#include "clk-cgu.h"
+
+#define PLL_DIV_WIDTH 4
+
+/* Gate1 clock shift */
+#define G_VCODEC_SHIFT 2
+#define G_DMA0_SHIFT 5
+#define G_USB0_SHIFT 6
+#define G_SPI1_SHIFT 7
+#define G_SPI0_SHIFT 8
+#define G_CBM_SHIFT 9
+#define G_EBU_SHIFT 10
+#define G_SSO_SHIFT 11
+#define G_GPTC0_SHIFT 12
+#define G_GPTC1_SHIFT 13
+#define G_GPTC2_SHIFT 14
+#define G_UART_SHIFT 17
+#define G_CPYTO_SHIFT 20
+#define G_SECPT_SHIFT 21
+#define G_TOE_SHIFT 22
+#define G_MPE_SHIFT 23
+#define G_TDM_SHIFT 25
+#define G_PAE_SHIFT 26
+#define G_USB1_SHIFT 27
+#define G_SWITCH_SHIFT 28
+
+/* Gate2 clock shift */
+#define G_PCIE0_SHIFT 1
+#define G_PCIE1_SHIFT 17
+#define G_PCIE2_SHIFT 25
+
+/* Register definition */
+#define GRX500_PLL0A_CFG0 0x0004
+#define GRX500_PLL0A_CFG1 0x0008
+#define GRX500_PLL0B_CFG0 0x0034
+#define GRX500_PLL0B_CFG1 0x0038
+#define GRX500_LCPLL_CFG0 0x0094
+#define GRX500_LCPLL_CFG1 0x0098
+#define GRX500_IF_CLK 0x00c4
+#define GRX500_CLK_GSR1 0x0120
+#define GRX500_CLK_GSR2 0x0130
+
+static const struct clk_div_table pll_div[] = {
+ {1, 2},
+ {2, 3},
+ {3, 4},
+ {4, 5},
+ {5, 6},
+ {6, 8},
+ {7, 10},
+ {8, 12},
+ {9, 16},
+ {10, 20},
+ {11, 24},
+ {12, 32},
+ {13, 40},
+ {14, 48},
+ {15, 64}
+};
+
+enum grx500_plls {
+ pll0a, pll0b, pll3,
+};
+
+PNAME(pll_p) = { "osc" };
+PNAME(cpu_p) = { "cpu0", "cpu1" };
+
+static struct intel_osc_clk grx500_osc_clks[] __initdata = {
+ INTEL_OSC(CLK_OSC, "osc", "intel,osc-frequency", 40000000),
+};
+
+static struct intel_pll_clk grx500_pll_clks[] __initdata = {
+ [pll0a] = INTEL_PLL(CLK_PLL0A, pll_grx500, "pll0a",
+ pll_p, 0, GRX500_PLL0A_CFG0, NULL, 0, 0, 0),
+ [pll0b] = INTEL_PLL(CLK_PLL0B, pll_grx500, "pll0b",
+ pll_p, 0, GRX500_PLL0B_CFG0, NULL, 0, 0, 0),
+ [pll3] = INTEL_PLL(CLK_PLL3, pll_grx500, "pll3",
+ pll_p, 0, GRX500_LCPLL_CFG0, NULL, 0, 0, 0),
+};
+
+static struct intel_clk_branch grx500_branch_clks[] __initdata = {
+ INTEL_DIV(CLK_CBM, "cbm", "pll0a", 0, GRX500_PLL0A_CFG1,
+ 0, PLL_DIV_WIDTH, 0, 0, pll_div),
+ INTEL_DIV(CLK_NGI, "ngi", "pll0a", 0, GRX500_PLL0A_CFG1,
+ 4, PLL_DIV_WIDTH, 0, 0, pll_div),
+ INTEL_DIV(CLK_SSX4, "ssx4", "pll0a", 0, GRX500_PLL0A_CFG1,
+ 8, PLL_DIV_WIDTH, 0, 0, pll_div),
+ INTEL_DIV(CLK_CPU0, "cpu0", "pll0a", 0, GRX500_PLL0A_CFG1,
+ 12, PLL_DIV_WIDTH, 0, 0, pll_div),
+ INTEL_DIV(CLK_PAE, "pae", "pll0b", 0, GRX500_PLL0B_CFG1,
+ 0, PLL_DIV_WIDTH, 0, 0, pll_div),
+ INTEL_DIV(CLK_GSWIP, "gswip", "pll0b", 0, GRX500_PLL0B_CFG1,
+ 4, PLL_DIV_WIDTH, 0, 0, pll_div),
+ INTEL_DIV(CLK_DDR, "ddr", "pll0b", 0, GRX500_PLL0B_CFG1,
+ 8, PLL_DIV_WIDTH, 0, 0, pll_div),
+ INTEL_DIV(CLK_CPU1, "cpu1", "pll0b", 0, GRX500_PLL0B_CFG1,
+ 12, PLL_DIV_WIDTH, 0, 0, pll_div),
+ INTEL_MUX(CLK_CPU, "cpu", cpu_p, CLK_SET_RATE_PARENT,
+ GRX500_PLL0A_CFG1, 29, 1, 0, 0),
+ INTEL_GATE(GCLK_DMA0, "g_dma0", NULL, 0, GRX500_CLK_GSR1,
+ G_DMA0_SHIFT, GATE_CLK_HW, 0),
+ INTEL_GATE(GCLK_USB0, "g_usb0", NULL, 0, GRX500_CLK_GSR1,
+ G_USB0_SHIFT, GATE_CLK_HW, 0),
+ INTEL_GATE(GCLK_GPTC0, "g_gptc0", NULL, 0, GRX500_CLK_GSR1,
+ G_GPTC0_SHIFT, GATE_CLK_HW, 0),
+ INTEL_GATE(GCLK_GPTC1, "g_gptc1", NULL, 0, GRX500_CLK_GSR1,
+ G_GPTC1_SHIFT, GATE_CLK_HW, 0),
+ INTEL_GATE(GCLK_GPTC2, "g_gptc2", NULL, 0, GRX500_CLK_GSR1,
+ G_GPTC2_SHIFT, GATE_CLK_HW, 0),
+ INTEL_GATE(GCLK_UART, "g_uart", NULL, 0, GRX500_CLK_GSR1,
+ G_UART_SHIFT, GATE_CLK_HW, 0),
+ INTEL_GATE(GCLK_PCIE0, "g_pcie0", NULL, 0, GRX500_CLK_GSR2,
+ G_PCIE0_SHIFT, GATE_CLK_HW, 0),
+ INTEL_GATE(GCLK_PCIE1, "g_pcie1", NULL, 0, GRX500_CLK_GSR2,
+ G_PCIE1_SHIFT, GATE_CLK_HW, 0),
+ INTEL_GATE(GCLK_PCIE2, "g_pcie2", NULL, 0, GRX500_CLK_GSR2,
+ G_PCIE2_SHIFT, GATE_CLK_HW, 0),
+ INTEL_GATE(GCLK_I2C, "g_i2c", NULL, 0, 0, 0, GATE_CLK_VT, 0),
+ INTEL_FIXED(CLK_VOICE, "voice", NULL, 0, GRX500_IF_CLK, 14, 2,
+ CLOCK_FLAG_VAL_INIT, 8192000, 2),
+ INTEL_FIXED_FACTOR(CLK_DDRPHY, "ddrphy", "ddr", 0, 0, 0,
+ 0, 0, 0, 2, 1),
+ INTEL_FIXED_FACTOR(CLK_PCIE, "pcie", "pll3", 0, 0, 0,
+ 0, 0, 0, 1, 40),
+};
+
+static void __init grx500_clk_init(struct device_node *np)
+{
+ struct intel_clk_provider *ctx;
+ struct regmap *map;
+
+ map = syscon_node_to_regmap(np);
+ if (IS_ERR(map))
+ return;
+
+ ctx = intel_clk_init(np, map, CLK_NR_CLKS);
+ if (IS_ERR(ctx)) {
+ regmap_exit(map);
+ return;
+ }
+
+ intel_clk_register_osc(ctx, grx500_osc_clks,
+ ARRAY_SIZE(grx500_osc_clks));
+ intel_clk_register_plls(ctx, grx500_pll_clks,
+ ARRAY_SIZE(grx500_pll_clks));
+ intel_clk_register_branches(ctx, grx500_branch_clks,
+ ARRAY_SIZE(grx500_branch_clks));
+ of_clk_add_provider(np, of_clk_src_onecell_get, &ctx->clk_data);
+
+ pr_debug("%s clk init done!\n", __func__);
+}
+
+CLK_OF_DECLARE(intel_grx500_cgu, "intel,grx500-cgu", grx500_clk_init);
diff --git a/include/dt-bindings/clock/intel,grx500-clk.h b/include/dt-bindings/clock/intel,grx500-clk.h
new file mode 100644
index 000000000000..eb7daecea7dc
--- /dev/null
+++ b/include/dt-bindings/clock/intel,grx500-clk.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Intel Corporation.
+ * Zhu YiXin <Yixin.zhu@intel.com>
+ *
+ */
+
+#ifndef __INTEL_GRX500_CLK_H
+#define __INTEL_GRX500_CLK_H
+
+/* OSC clock */
+#define CLK_OSC 1
+
+/* PLL clocks */
+#define CLK_PLL0A 2
+#define CLK_PLL0B 3
+#define CLK_PLL3 4
+
+/* clocks under pll0a */
+#define CLK_CBM 11
+#define CLK_NGI 12
+#define CLK_SSX4 13
+#define CLK_CPU0 14
+
+/* clocks under pll0b */
+#define CLK_PAE 21
+#define CLK_GSWIP 22
+#define CLK_DDR 23
+#define CLK_CPU1 24
+
+/* clocks under pll3 */
+#define CLK_PCIE 33
+
+/* clocks under gate1 */
+#define GCLK_V_CODEC 106
+#define GCLK_DMA0 107
+#define GCLK_USB0 108
+#define GCLK_SPI1 109
+#define GCLK_SPI0 110
+#define GCLK_CBM 111
+#define GCLK_EBU 112
+#define GCLK_SSO 113
+#define GCLK_GPTC0 114
+#define GCLK_GPTC1 115
+#define GCLK_GPTC2 116
+#define GCLK_UART 117
+#define GCLK_EIP97 118
+#define GCLK_EIP123 119
+#define GCLK_TOE 120
+#define GCLK_MPE 121
+#define GCLK_TDM 122
+#define GCLK_PAE 123
+#define GCLK_USB1 124
+#define GCLK_GSWIP 125
+
+/* clocks under gate2 */
+#define GCLK_PCIE0 126
+#define GCLK_PCIE1 127
+#define GCLK_PCIE2 128
+
+/* other clocks */
+#define CLK_CPU 150
+#define CLK_DDRPHY 151
+#define GCLK_I2C 152
+#define CLK_VOICE 153
+
+#define CLK_NR_CLKS 200
+
+#endif /* __INTEL_GRX500_CLK_H */
--
2.11.0
^ permalink raw reply related
* [PATCH v2 03/18] dt-bindings: clk: Add documentation of grx500 clock controller
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Michael Turquette, Stephen Boyd, linux-kernel, Rob Herring,
Mark Rutland
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
From: Yixin Zhu <yixin.zhu@linux.intel.com>
This patch adds binding documentation for grx500 clock controller.
Signed-off-by: YiXin Zhu <yixin.zhu@linux.intel.com>
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2:
- Rewrite clock driver's dt-binding document according to Rob Herring's
comments.
- Simplify device tree docoment, remove some clock description.
.../devicetree/bindings/clock/intel,grx500-clk.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/intel,grx500-clk.txt
diff --git a/Documentation/devicetree/bindings/clock/intel,grx500-clk.txt b/Documentation/devicetree/bindings/clock/intel,grx500-clk.txt
new file mode 100644
index 000000000000..e54e1dad9196
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,grx500-clk.txt
@@ -0,0 +1,39 @@
+Device Tree Clock bindings for grx500 PLL controller.
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The grx500 clock controller supplies clock to various controllers within the
+SoC.
+
+Required properties for clock node
+- compatible: Should be "intel,grx500-cgu".
+- reg: physical base address of the controller and length of memory range.
+- #clock-cells: should be 1.
+
+Optional Propteries:
+- intel,osc-frequency: frequency of the osc clock.
+if missing, driver will use clock rate defined in the driver.
+
+Example: Clock controller node:
+
+ cgu: cgu@16200000 {
+ compatible = "intel,grx500-cgu", "syscon";
+ reg = <0x16200000 0x200>;
+ #clock-cells = <1>;
+ };
+
+
+Example: UART controller node that consumes the clock generated by clock
+ controller.
+
+ asc0: serial@16600000 {
+ compatible = "lantiq,asc";
+ reg = <0x16600000 0x100000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
+ clock-names = "freq", "asc";
+ };
--
2.11.0
^ permalink raw reply related
* [PATCH v2 04/18] MIPS: dts: Add initial support for Intel MIPS SoCs
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
James Hogan, linux-kernel, Paul Burton, Rob Herring, Mark Rutland,
Ralf Baechle
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
From: Hua Ma <hua.ma@linux.intel.com>
Add dts files to support Intel MIPS SoCs:
- xrx500.dtsi is the chip dts
- easy350_anywan.dts is the board dts
Signed-off-by: Hua Ma <hua.ma@linux.intel.com>
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2:
- New patch split from previous patch
- The memory address is changed to @20000000
- Update to obj-$(CONFIG_BUILTIN_DTB) as per commit fca3aa166422
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/intel-mips/Makefile | 4 ++
arch/mips/boot/dts/intel-mips/easy350_anywan.dts | 26 ++++++++++
arch/mips/boot/dts/intel-mips/xrx500.dtsi | 66 ++++++++++++++++++++++++
4 files changed, 97 insertions(+)
create mode 100644 arch/mips/boot/dts/intel-mips/Makefile
create mode 100644 arch/mips/boot/dts/intel-mips/easy350_anywan.dts
create mode 100644 arch/mips/boot/dts/intel-mips/xrx500.dtsi
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index 1e79cab8e269..05f52f279047 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -3,6 +3,7 @@ subdir-y += brcm
subdir-y += cavium-octeon
subdir-y += img
subdir-y += ingenic
+subdir-y += intel-mips
subdir-y += lantiq
subdir-y += mscc
subdir-y += mti
diff --git a/arch/mips/boot/dts/intel-mips/Makefile b/arch/mips/boot/dts/intel-mips/Makefile
new file mode 100644
index 000000000000..adfaabbbb07c
--- /dev/null
+++ b/arch/mips/boot/dts/intel-mips/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DTB_INTEL_MIPS_GRX500) += easy350_anywan.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/intel-mips/easy350_anywan.dts b/arch/mips/boot/dts/intel-mips/easy350_anywan.dts
new file mode 100644
index 000000000000..e5e95f90c5e7
--- /dev/null
+++ b/arch/mips/boot/dts/intel-mips/easy350_anywan.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+#include <dt-bindings/clock/intel,grx500-clk.h>
+
+#include "xrx500.dtsi"
+
+/ {
+ model = "EASY350 ANYWAN (GRX350) Main model";
+ compatible = "intel,easy350-anywan";
+
+ aliases {
+ serial0 = &asc0;
+ };
+
+ chosen {
+ bootargs = "earlycon=lantiq,0x16600000 clk_ignore_unused";
+ stdout-path = "serial0";
+ };
+
+ memory@20000000 {
+ device_type = "memory";
+ reg = <0x20000000 0x0e000000>;
+ };
+};
diff --git a/arch/mips/boot/dts/intel-mips/xrx500.dtsi b/arch/mips/boot/dts/intel-mips/xrx500.dtsi
new file mode 100644
index 000000000000..54c5f8f8b604
--- /dev/null
+++ b/arch/mips/boot/dts/intel-mips/xrx500.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,xrx500";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "mti,interaptiv";
+ clocks = <&cgu CLK_CPU>;
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "mti,interaptiv";
+ reg = <1>;
+ };
+ };
+
+ cpu_intc: interrupt-controller {
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gic: gic@12320000 {
+ compatible = "mti,gic";
+ reg = <0x12320000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ /*
+ * Declare the interrupt-parent even though the mti,gic
+ * binding doesn't require it, such that the kernel can
+ * figure out that cpu_intc is the root interrupt
+ * controller & should be probed first.
+ */
+ interrupt-parent = <&cpu_intc>;
+ mti,reserved-ipi-vectors = <56 8>;
+ };
+
+ cgu: cgu@16200000 {
+ compatible = "intel,grx500-cgu", "syscon";
+ reg = <0x16200000 0x200>;
+ #clock-cells = <1>;
+ };
+
+ asc0: serial@16600000 {
+ compatible = "lantiq,asc";
+ reg = <0x16600000 0x100000>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
+ clock-names = "freq", "asc";
+ };
+};
--
2.11.0
^ permalink raw reply related
* [PATCH v2 05/18] dt-binding: MIPS: Add documentation of Intel MIPS SoCs
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
James Hogan, linux-kernel, Paul Burton, Rob Herring, Ralf Baechle,
Mark Rutland
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
From: Hua Ma <hua.ma@linux.intel.com>
This patch adds binding documentation for the
compatible values of the Intel MIPS SoCs.
Signed-off-by: Hua Ma <hua.ma@linux.intel.com>
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2:
- New patch split from previous patch
- Add the board and chip compatible in dt document
Documentation/devicetree/bindings/mips/intel.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mips/intel.txt
diff --git a/Documentation/devicetree/bindings/mips/intel.txt b/Documentation/devicetree/bindings/mips/intel.txt
new file mode 100644
index 000000000000..ac594ef303b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/intel.txt
@@ -0,0 +1,17 @@
+Intel MIPS SoC device tree bindings
+
+1, SoCs
+
+Each device tree must specify a compatible value for the Intel SoC
+it uses in the compatible property of the root node. The compatible
+value must be one of the following values:
+
+ intel,xrx500
+
+2, Boards
+
+Each device tree must specify a compatible value for the Intel Board
+it uses in the compatible property of the root node. The compatible
+value must be one of the following values:
+
+ intel,easy350-anywan
--
2.11.0
^ permalink raw reply related
* [PATCH v2 06/18] MIPS: dts: Change upper case to lower case
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
James Hogan, linux-kernel, Thomas Gleixner, Philippe Ombredanne,
Paul Burton, Rob Herring, Kate Stewart, Greg Kroah-Hartman,
Mark Rutland, Ralf Baechle
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
All the upper case in unit-address and hex constants are
changed to lower case according to the Linux conventions.
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2: None
arch/mips/boot/dts/lantiq/danube.dtsi | 42 ++++++++++++++++-----------------
arch/mips/boot/dts/lantiq/easy50712.dts | 14 +++++------
2 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
index 2dd950181f8a..510be63c8bdf 100644
--- a/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -10,12 +10,12 @@
};
};
- biu@1F800000 {
+ biu@1f800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
- reg = <0x1F800000 0x800000>;
- ranges = <0x0 0x1F800000 0x7FFFFF>;
+ reg = <0x1f800000 0x800000>;
+ ranges = <0x0 0x1f800000 0x7fffff>;
icu0: icu@80200 {
#interrupt-cells = <1>;
@@ -24,18 +24,18 @@
reg = <0x80200 0x120>;
};
- watchdog@803F0 {
+ watchdog@803f0 {
compatible = "lantiq,wdt";
- reg = <0x803F0 0x10>;
+ reg = <0x803f0 0x10>;
};
};
- sram@1F000000 {
+ sram@1f000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram";
- reg = <0x1F000000 0x800000>;
- ranges = <0x0 0x1F000000 0x7FFFFF>;
+ reg = <0x1f000000 0x800000>;
+ ranges = <0x0 0x1f000000 0x7fffff>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
@@ -66,41 +66,41 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
- ranges = <0x0 0x10000000 0xEEFFFFF>;
- reg = <0x10000000 0xEF00000>;
+ ranges = <0x0 0x10000000 0xeefffff>;
+ reg = <0x10000000 0xef00000>;
- gptu@E100A00 {
+ gptu@e100a00 {
compatible = "lantiq,gptu-xway";
- reg = <0xE100A00 0x100>;
+ reg = <0xe100a00 0x100>;
};
- serial@E100C00 {
+ serial@e100c00 {
compatible = "lantiq,asc";
- reg = <0xE100C00 0x400>;
+ reg = <0xe100c00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
};
- dma0: dma@E104100 {
+ dma0: dma@e104100 {
compatible = "lantiq,dma-xway";
- reg = <0xE104100 0x800>;
+ reg = <0xe104100 0x800>;
};
- ebu0: ebu@E105300 {
+ ebu0: ebu@e105300 {
compatible = "lantiq,ebu-xway";
- reg = <0xE105300 0x100>;
+ reg = <0xe105300 0x100>;
};
- pci0: pci@E105400 {
+ pci0: pci@e105400 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
- 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+ 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
reg = <0x7000000 0x8000 /* config space */
- 0xE105400 0x400>; /* pci bridge */
+ 0xe105400 0x400>; /* pci bridge */
};
};
};
diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts
index c37a33962f28..1ce20b7d05cb 100644
--- a/arch/mips/boot/dts/lantiq/easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/easy50712.dts
@@ -52,14 +52,14 @@
};
};
- gpio: pinmux@E100B10 {
+ gpio: pinmux@e100b10 {
compatible = "lantiq,danube-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
- reg = <0xE100B10 0xA0>;
+ reg = <0xe100b10 0xa0>;
state_default: pinmux {
stp {
@@ -82,26 +82,26 @@
};
};
- etop@E180000 {
+ etop@e180000 {
compatible = "lantiq,etop-xway";
- reg = <0xE180000 0x40000>;
+ reg = <0xe180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
phy-mode = "rmii";
mac-address = [ 00 11 22 33 44 55 ];
};
- stp0: stp@E100BB0 {
+ stp0: stp@e100bb0 {
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
- reg = <0xE100BB0 0x40>;
+ reg = <0xe100bb0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
- pci@E105400 {
+ pci@e105400 {
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
--
2.11.0
^ permalink raw reply related
* [PATCH v2 07/18] MIPS: dts: Add aliases node for lantiq danube serial
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
James Hogan, linux-kernel, Thomas Gleixner, Philippe Ombredanne,
Paul Burton, Rob Herring, Kate Stewart, Greg Kroah-Hartman,
Mark Rutland, Ralf Baechle
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
Previous implementation uses a hard-coded register value to check
if the current serial entity is the console entity.
Now the lantiq serial driver uses the aliases for the index of the
serial port.
The lantiq danube serial dts are updated with aliases to support this.
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2: None
arch/mips/boot/dts/lantiq/danube.dtsi | 2 +-
arch/mips/boot/dts/lantiq/easy50712.dts | 4 ++++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
index 510be63c8bdf..73746d7577d7 100644
--- a/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -74,7 +74,7 @@
reg = <0xe100a00 0x100>;
};
- serial@e100c00 {
+ asc1: serial@e100c00 {
compatible = "lantiq,asc";
reg = <0xe100c00 0x400>;
interrupt-parent = <&icu0>;
diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts
index 1ce20b7d05cb..452860ca1868 100644
--- a/arch/mips/boot/dts/lantiq/easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/easy50712.dts
@@ -4,6 +4,10 @@
/include/ "danube.dtsi"
/ {
+ aliases {
+ serial0 = &asc1;
+ };
+
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
--
2.11.0
^ permalink raw reply related
* [PATCH v2 08/18] serial: intel: Get serial id from dts
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Greg Kroah-Hartman, linux-kernel, Jiri Slaby
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
Get serial id from dts.
"#ifdef CONFIG_LANTIQ" preprocessor is used because LTQ_EARLY_ASC
macro is defined in lantiq_soc.h.
lantiq_soc.h is in arch path for legacy product support.
arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
If "#ifdef preprocessor" is changed to
"if (IS_ENABLED(CONFIG_LANTIQ))", when CONFIG_LANTIQ is not enabled,
code using LTQ_EARLY_ASC is compiled.
Compilation will fail for no LTQ_EARLY_ASC defined.
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2: None
drivers/tty/serial/lantiq.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 044128277248..836ca51460f2 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -6,6 +6,7 @@
* Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2007 John Crispin <john@phrozen.org>
* Copyright (C) 2010 Thomas Langer, <thomas.langer@lantiq.com>
+ * Copyright (C) 2018 Intel Corporation.
*/
#include <linux/slab.h>
@@ -688,7 +689,7 @@ lqasc_probe(struct platform_device *pdev)
struct ltq_uart_port *ltq_port;
struct uart_port *port;
struct resource *mmres, irqres[3];
- int line = 0;
+ int line;
int ret;
mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -699,9 +700,19 @@ lqasc_probe(struct platform_device *pdev)
return -ENODEV;
}
- /* check if this is the console port */
- if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC))
- line = 1;
+ /* get serial id */
+ line = of_alias_get_id(node, "serial");
+ if (line < 0) {
+#ifdef CONFIG_LANTIQ
+ if (mmres->start == CPHYSADDR(LTQ_EARLY_ASC))
+ line = 0;
+ else
+ line = 1;
+#else
+ dev_err(&pdev->dev, "failed to get alias id, errno %d\n", line);
+ return line;
+#endif
+ }
if (lqasc_port[line]) {
dev_err(&pdev->dev, "port %d already allocated\n", line);
--
2.11.0
^ permalink raw reply related
* [PATCH v2 09/18] serial: intel: Change ltq_w32_mask to asc_update_bits
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Greg Kroah-Hartman, linux-kernel, Jiri Slaby
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
ltq prefix is platform specific function, asc prefix
is more generic.
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2: None
drivers/tty/serial/lantiq.c | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 836ca51460f2..e36e6a267e7a 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -114,6 +114,13 @@ struct ltq_uart_port {
unsigned int err_irq;
};
+static inline void asc_update_bits(u32 clear, u32 set, void __iomem *reg)
+{
+ u32 tmp = readl(reg);
+
+ writel((tmp & ~clear) | set, reg);
+}
+
static inline struct
ltq_uart_port *to_ltq_uart_port(struct uart_port *port)
{
@@ -164,16 +171,16 @@ lqasc_rx_chars(struct uart_port *port)
if (rsr & ASCSTATE_ANY) {
if (rsr & ASCSTATE_PE) {
port->icount.parity++;
- ltq_w32_mask(0, ASCWHBSTATE_CLRPE,
+ asc_update_bits(0, ASCWHBSTATE_CLRPE,
port->membase + LTQ_ASC_WHBSTATE);
} else if (rsr & ASCSTATE_FE) {
port->icount.frame++;
- ltq_w32_mask(0, ASCWHBSTATE_CLRFE,
+ asc_update_bits(0, ASCWHBSTATE_CLRFE,
port->membase + LTQ_ASC_WHBSTATE);
}
if (rsr & ASCSTATE_ROE) {
port->icount.overrun++;
- ltq_w32_mask(0, ASCWHBSTATE_CLRROE,
+ asc_update_bits(0, ASCWHBSTATE_CLRROE,
port->membase + LTQ_ASC_WHBSTATE);
}
@@ -253,7 +260,7 @@ lqasc_err_int(int irq, void *_port)
struct uart_port *port = (struct uart_port *)_port;
spin_lock_irqsave(<q_asc_lock, flags);
/* clear any pending interrupts */
- ltq_w32_mask(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE |
+ asc_update_bits(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE |
ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE);
spin_unlock_irqrestore(<q_asc_lock, flags);
return IRQ_HANDLED;
@@ -305,7 +312,7 @@ lqasc_startup(struct uart_port *port)
clk_enable(ltq_port->clk);
port->uartclk = clk_get_rate(ltq_port->fpiclk);
- ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
+ asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
port->membase + LTQ_ASC_CLC);
ltq_w32(0, port->membase + LTQ_ASC_PISEL);
@@ -321,7 +328,7 @@ lqasc_startup(struct uart_port *port)
* setting enable bits
*/
wmb();
- ltq_w32_mask(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
+ asc_update_bits(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN |
ASCCON_ROEN, port->membase + LTQ_ASC_CON);
retval = request_irq(ltq_port->tx_irq, lqasc_tx_int,
@@ -365,9 +372,9 @@ lqasc_shutdown(struct uart_port *port)
free_irq(ltq_port->err_irq, port);
ltq_w32(0, port->membase + LTQ_ASC_CON);
- ltq_w32_mask(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
+ asc_update_bits(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
port->membase + LTQ_ASC_RXFCON);
- ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
+ asc_update_bits(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
port->membase + LTQ_ASC_TXFCON);
if (!IS_ERR(ltq_port->clk))
clk_disable(ltq_port->clk);
@@ -439,7 +446,7 @@ lqasc_set_termios(struct uart_port *port,
spin_lock_irqsave(<q_asc_lock, flags);
/* set up CON */
- ltq_w32_mask(0, con, port->membase + LTQ_ASC_CON);
+ asc_update_bits(0, con, port->membase + LTQ_ASC_CON);
/* Set baud rate - take a divider of 2 into account */
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
@@ -447,19 +454,19 @@ lqasc_set_termios(struct uart_port *port,
divisor = divisor / 2 - 1;
/* disable the baudrate generator */
- ltq_w32_mask(ASCCON_R, 0, port->membase + LTQ_ASC_CON);
+ asc_update_bits(ASCCON_R, 0, port->membase + LTQ_ASC_CON);
/* make sure the fractional divider is off */
- ltq_w32_mask(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON);
+ asc_update_bits(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON);
/* set up to use divisor of 2 */
- ltq_w32_mask(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);
+ asc_update_bits(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);
/* now we can write the new baudrate into the register */
ltq_w32(divisor, port->membase + LTQ_ASC_BG);
/* turn the baudrate generator back on */
- ltq_w32_mask(0, ASCCON_R, port->membase + LTQ_ASC_CON);
+ asc_update_bits(0, ASCCON_R, port->membase + LTQ_ASC_CON);
/* enable rx */
ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
--
2.11.0
^ permalink raw reply related
* [PATCH v2 10/18] MIPS: lantiq: Unselect SWAP_IO_SPACE when LANTIQ is selected
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Ralf Baechle, Paul Burton, James Hogan, linux-kernel
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
SWAP_IO_SPACE macro prevents serial driver /drivers/tty/serial/lantiq.c
to use readl/writel to replace ltq_r32/w32 which are SoC or platform
specific APIs.
readl/writel are used for this serial driver to support multiple
platforms and multiple architectures. The legacy lantiq platform(Danube)
enables SWAP_IO_SPACE for supporting PCI due to some hardware bugs.
It's a little-endian bus plus PCI TX/RX swap enable impacted both data
and control path for MIPS based platforms. But it is better to let PCI
device driver to do endian swap since SWAP_IO_SPACE is a global wide macro
which potentially impacts other peripheral like USB.
ltq_r32/ltq_w32 is not impacted in other device drivers based on MIPS when
SWAP_IO_SPACE is not selected as they use non-byte swapping OS API
(__raw_read/__raw_writel).
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2: None
arch/mips/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2d34f17f3e24..2e7e0b538e52 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -400,7 +400,6 @@ config LANTIQ
select SYS_SUPPORTS_VPE_LOADER
select SYS_HAS_EARLY_PRINTK
select GPIOLIB
- select SWAP_IO_SPACE
select BOOT_RAW
select CLKDEV_LOOKUP
select USE_OF
--
2.11.0
^ permalink raw reply related
* [PATCH v2 11/18] serial: intel: Use readl/writel instead of ltq_r32/ltq_w32
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Greg Kroah-Hartman, linux-kernel, Jiri Slaby
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
Previous implementation uses platform-dependent functions
ltq_w32()/ltq_r32() to access registers. Those functions are not
available for other SoC which uses the same IP.
Change to OS provided readl()/writel() and readb()/writeb(), so
that different SoCs can use the same driver.
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2: None
drivers/tty/serial/lantiq.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index e36e6a267e7a..2e1b35b1cf4d 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -146,7 +146,7 @@ lqasc_start_tx(struct uart_port *port)
static void
lqasc_stop_rx(struct uart_port *port)
{
- ltq_w32(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE);
+ writel(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE);
}
static int
@@ -155,11 +155,11 @@ lqasc_rx_chars(struct uart_port *port)
struct tty_port *tport = &port->state->port;
unsigned int ch = 0, rsr = 0, fifocnt;
- fifocnt = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
+ fifocnt = readl(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
while (fifocnt--) {
u8 flag = TTY_NORMAL;
- ch = ltq_r8(port->membase + LTQ_ASC_RBUF);
- rsr = (ltq_r32(port->membase + LTQ_ASC_STATE)
+ ch = readb(port->membase + LTQ_ASC_RBUF);
+ rsr = (readl(port->membase + LTQ_ASC_STATE)
& ASCSTATE_ANY) | UART_DUMMY_UER_RX;
tty_flip_buffer_push(tport);
port->icount.rx++;
@@ -219,10 +219,10 @@ lqasc_tx_chars(struct uart_port *port)
return;
}
- while (((ltq_r32(port->membase + LTQ_ASC_FSTAT) &
+ while (((readl(port->membase + LTQ_ASC_FSTAT) &
ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) {
if (port->x_char) {
- ltq_w8(port->x_char, port->membase + LTQ_ASC_TBUF);
+ writeb(port->x_char, port->membase + LTQ_ASC_TBUF);
port->icount.tx++;
port->x_char = 0;
continue;
@@ -231,7 +231,7 @@ lqasc_tx_chars(struct uart_port *port)
if (uart_circ_empty(xmit))
break;
- ltq_w8(port->state->xmit.buf[port->state->xmit.tail],
+ writeb(port->state->xmit.buf[port->state->xmit.tail],
port->membase + LTQ_ASC_TBUF);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
@@ -247,7 +247,7 @@ lqasc_tx_int(int irq, void *_port)
unsigned long flags;
struct uart_port *port = (struct uart_port *)_port;
spin_lock_irqsave(<q_asc_lock, flags);
- ltq_w32(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR);
+ writel(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR);
spin_unlock_irqrestore(<q_asc_lock, flags);
lqasc_start_tx(port);
return IRQ_HANDLED;
@@ -272,7 +272,7 @@ lqasc_rx_int(int irq, void *_port)
unsigned long flags;
struct uart_port *port = (struct uart_port *)_port;
spin_lock_irqsave(<q_asc_lock, flags);
- ltq_w32(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR);
+ writel(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR);
lqasc_rx_chars(port);
spin_unlock_irqrestore(<q_asc_lock, flags);
return IRQ_HANDLED;
@@ -282,7 +282,7 @@ static unsigned int
lqasc_tx_empty(struct uart_port *port)
{
int status;
- status = ltq_r32(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
+ status = readl(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
return status ? 0 : TIOCSER_TEMT;
}
@@ -315,12 +315,12 @@ lqasc_startup(struct uart_port *port)
asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
port->membase + LTQ_ASC_CLC);
- ltq_w32(0, port->membase + LTQ_ASC_PISEL);
- ltq_w32(
+ writel(0, port->membase + LTQ_ASC_PISEL);
+ writel(
((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) |
ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
port->membase + LTQ_ASC_TXFCON);
- ltq_w32(
+ writel(
((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK)
| ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
port->membase + LTQ_ASC_RXFCON);
@@ -352,7 +352,7 @@ lqasc_startup(struct uart_port *port)
goto err2;
}
- ltq_w32(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
+ writel(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX,
port->membase + LTQ_ASC_IRNREN);
return 0;
@@ -371,7 +371,7 @@ lqasc_shutdown(struct uart_port *port)
free_irq(ltq_port->rx_irq, port);
free_irq(ltq_port->err_irq, port);
- ltq_w32(0, port->membase + LTQ_ASC_CON);
+ writel(0, port->membase + LTQ_ASC_CON);
asc_update_bits(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU,
port->membase + LTQ_ASC_RXFCON);
asc_update_bits(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
@@ -463,13 +463,13 @@ lqasc_set_termios(struct uart_port *port,
asc_update_bits(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON);
/* now we can write the new baudrate into the register */
- ltq_w32(divisor, port->membase + LTQ_ASC_BG);
+ writel(divisor, port->membase + LTQ_ASC_BG);
/* turn the baudrate generator back on */
asc_update_bits(0, ASCCON_R, port->membase + LTQ_ASC_CON);
/* enable rx */
- ltq_w32(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
+ writel(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE);
spin_unlock_irqrestore(<q_asc_lock, flags);
@@ -580,10 +580,10 @@ lqasc_console_putchar(struct uart_port *port, int ch)
return;
do {
- fifofree = (ltq_r32(port->membase + LTQ_ASC_FSTAT)
+ fifofree = (readl(port->membase + LTQ_ASC_FSTAT)
& ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
} while (fifofree == 0);
- ltq_w8(ch, port->membase + LTQ_ASC_TBUF);
+ writeb(ch, port->membase + LTQ_ASC_TBUF);
}
static void lqasc_serial_port_write(struct uart_port *port, const char *s,
--
2.11.0
^ permalink raw reply related
* [PATCH v2 12/18] serial: intel: Rename fpiclk to freqclk
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Greg Kroah-Hartman, linux-kernel, Jiri Slaby
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
Rename fpiclk to freqclk.
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2: None
drivers/tty/serial/lantiq.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 2e1b35b1cf4d..28086d52e980 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -106,7 +106,7 @@ static DEFINE_SPINLOCK(ltq_asc_lock);
struct ltq_uart_port {
struct uart_port port;
/* clock used to derive divider */
- struct clk *fpiclk;
+ struct clk *freqclk;
/* clock gating of the ASC core */
struct clk *clk;
unsigned int tx_irq;
@@ -310,7 +310,7 @@ lqasc_startup(struct uart_port *port)
if (!IS_ERR(ltq_port->clk))
clk_enable(ltq_port->clk);
- port->uartclk = clk_get_rate(ltq_port->fpiclk);
+ port->uartclk = clk_get_rate(ltq_port->freqclk);
asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
port->membase + LTQ_ASC_CLC);
@@ -633,7 +633,7 @@ lqasc_console_setup(struct console *co, char *options)
if (!IS_ERR(ltq_port->clk))
clk_enable(ltq_port->clk);
- port->uartclk = clk_get_rate(ltq_port->fpiclk);
+ port->uartclk = clk_get_rate(ltq_port->freqclk);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -744,8 +744,8 @@ lqasc_probe(struct platform_device *pdev)
port->irq = irqres[0].start;
port->mapbase = mmres->start;
- ltq_port->fpiclk = clk_get_fpi();
- if (IS_ERR(ltq_port->fpiclk)) {
+ ltq_port->freqclk = clk_get_fpi();
+ if (IS_ERR(ltq_port->freqclk)) {
pr_err("failed to get fpi clk\n");
return -ENOENT;
}
--
2.11.0
^ permalink raw reply related
* [PATCH v2 13/18] serial: intel: Replace clk_enable/clk_disable with clk generic API
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Greg Kroah-Hartman, linux-kernel, Jiri Slaby
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
The clk driver has introduced new clock APIs that replace
the existing clk_enable and clk_disable.
-clk_enable() APIs is replaced with clk_prepare_enable().
-clk_disable() API is replaced with clk_disable_unprepare().
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2: None
drivers/tty/serial/lantiq.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 28086d52e980..36479d66fb7c 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -309,7 +309,7 @@ lqasc_startup(struct uart_port *port)
int retval;
if (!IS_ERR(ltq_port->clk))
- clk_enable(ltq_port->clk);
+ clk_prepare_enable(ltq_port->clk);
port->uartclk = clk_get_rate(ltq_port->freqclk);
asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
@@ -377,7 +377,7 @@ lqasc_shutdown(struct uart_port *port)
asc_update_bits(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
port->membase + LTQ_ASC_TXFCON);
if (!IS_ERR(ltq_port->clk))
- clk_disable(ltq_port->clk);
+ clk_disable_unprepare(ltq_port->clk);
}
static void
@@ -631,7 +631,7 @@ lqasc_console_setup(struct console *co, char *options)
port = <q_port->port;
if (!IS_ERR(ltq_port->clk))
- clk_enable(ltq_port->clk);
+ clk_prepare_enable(ltq_port->clk);
port->uartclk = clk_get_rate(ltq_port->freqclk);
--
2.11.0
^ permalink raw reply related
* [PATCH v2 14/18] serial: intel: Add CCF support
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Greg Kroah-Hartman, linux-kernel, Jiri Slaby
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
Previous implementation uses platform-dependent API to get the clock.
Those functions are not available for other SoC which uses the same IP.
The CCF (Common Clock Framework) have an abstraction based APIs for
clock. In future, the platform specific code will be removed when the
legacy soc use CCF as well.
Change to use CCF APIs to get clock and rate. So that different SoCs
can use the same driver.
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2: None
drivers/tty/serial/lantiq.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 36479d66fb7c..35518ab3a80d 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -26,7 +26,9 @@
#include <linux/clk.h>
#include <linux/gpio.h>
+#ifdef CONFIG_LANTIQ
#include <lantiq_soc.h>
+#endif
#define PORT_LTQ_ASC 111
#define MAXPORTS 2
@@ -744,14 +746,23 @@ lqasc_probe(struct platform_device *pdev)
port->irq = irqres[0].start;
port->mapbase = mmres->start;
+#if (IS_ENABLED(CONFIG_LANTIQ) && !IS_ENABLED(CONFIG_COMMON_CLK))
ltq_port->freqclk = clk_get_fpi();
+#else
+ ltq_port->freqclk = devm_clk_get(&pdev->dev, "freq");
+#endif
+
if (IS_ERR(ltq_port->freqclk)) {
pr_err("failed to get fpi clk\n");
return -ENOENT;
}
/* not all asc ports have clock gates, lets ignore the return code */
+#if (IS_ENABLED(CONFIG_LANTIQ) && !IS_ENABLED(CONFIG_COMMON_CLK))
ltq_port->clk = clk_get(&pdev->dev, NULL);
+#else
+ ltq_port->clk = devm_clk_get(&pdev->dev, "asc");
+#endif
ltq_port->tx_irq = irqres[0].start;
ltq_port->rx_irq = irqres[1].start;
--
2.11.0
^ permalink raw reply related
* [PATCH v2 15/18] serial: intel: Support more platform
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Greg Kroah-Hartman, linux-kernel, Jiri Slaby
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
Support more platform.
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2: None
drivers/tty/serial/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index df8bd0c7b97d..564c71fc24bb 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1062,7 +1062,7 @@ config SERIAL_OMAP_CONSOLE
config SERIAL_LANTIQ
bool "Lantiq serial driver"
- depends on LANTIQ
+ depends on LANTIQ || INTEL_MIPS || COMPILE_TEST
select SERIAL_CORE
select SERIAL_CORE_CONSOLE
select SERIAL_EARLYCON
--
2.11.0
^ permalink raw reply related
* [PATCH v2 16/18] serial: intel: Reorder the head files
From: Songjun Wu @ 2018-08-03 3:02 UTC (permalink / raw)
To: hua.ma, yixin.zhu, chuanhua.lei, qi-ming.wu
Cc: linux-mips, linux-clk, linux-serial, devicetree, Songjun Wu,
Greg Kroah-Hartman, linux-kernel, Jiri Slaby
In-Reply-To: <20180803030237.3366-1-songjun.wu@linux.intel.com>
Reorder the head files according to the coding style.
Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---
Changes in v2:
- New patch to reorder the head files according to the coding style.
drivers/tty/serial/lantiq.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 35518ab3a80d..804aad60ed80 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -9,22 +9,22 @@
* Copyright (C) 2018 Intel Corporation.
*/
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
+#include <linux/clk.h>
#include <linux/console.h>
-#include <linux/sysrq.h>
#include <linux/device.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
+#include <linux/of_platform.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#ifdef CONFIG_LANTIQ
#include <lantiq_soc.h>
--
2.11.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox