* Re: [PATCH 3/5] serial: sprd: Remove unnecessary resource validation
From: Chunyan Zhang @ 2018-09-04 6:55 UTC (permalink / raw)
To: Baolin Wang
Cc: Greg Kroah-Hartman, jslaby, Orson Zhai, Mark Brown, linux-serial,
Linux Kernel Mailing List
In-Reply-To: <b48edead2c6abb862b121d347b01bf07dec818ea.1533950271.git.baolin.wang@linaro.org>
On 11 August 2018 at 09:34, Baolin Wang <baolin.wang@linaro.org> wrote:
> The devm_ioremap_resource() will valid the resources, thus remove the
> unnecessary resource validation in the driver.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
> ---
> drivers/tty/serial/sprd_serial.c | 7 ++-----
> 1 file changed, 2 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
> index e18d8af..03b0cd4 100644
> --- a/drivers/tty/serial/sprd_serial.c
> +++ b/drivers/tty/serial/sprd_serial.c
> @@ -710,15 +710,12 @@ static int sprd_probe(struct platform_device *pdev)
> up->uartclk = clk_get_rate(clk);
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!res) {
> - dev_err(&pdev->dev, "not provide mem resource\n");
> - return -ENODEV;
> - }
> - up->mapbase = res->start;
> up->membase = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(up->membase))
> return PTR_ERR(up->membase);
>
> + up->mapbase = res->start;
> +
> irq = platform_get_irq(pdev, 0);
> if (irq < 0) {
> dev_err(&pdev->dev, "not provide irq resource: %d\n", irq);
> --
> 1.9.1
>
^ permalink raw reply
* Re: [PATCH 4/5] serial: sprd: Change 'int' to 'unsigned int'
From: Chunyan Zhang @ 2018-09-04 6:55 UTC (permalink / raw)
To: Baolin Wang
Cc: Greg Kroah-Hartman, jslaby, Orson Zhai, Mark Brown, linux-serial,
Linux Kernel Mailing List
In-Reply-To: <59172367ea674d5d4a3bd7c4d52362445174536e.1533950271.git.baolin.wang@linaro.org>
On 11 August 2018 at 09:34, Baolin Wang <baolin.wang@linaro.org> wrote:
> The register offset value should be 'unsigned int' type.
>
> Moreover, prefer 'unsigned int' to bare use of 'unsigned'.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
> ---
> drivers/tty/serial/sprd_serial.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
> index 03b0cd4..8d5c9cd 100644
> --- a/drivers/tty/serial/sprd_serial.c
> +++ b/drivers/tty/serial/sprd_serial.c
> @@ -109,12 +109,14 @@ struct sprd_uart_port {
> static struct sprd_uart_port *sprd_port[UART_NR_MAX];
> static int sprd_ports_num;
>
> -static inline unsigned int serial_in(struct uart_port *port, int offset)
> +static inline unsigned int serial_in(struct uart_port *port,
> + unsigned int offset)
> {
> return readl_relaxed(port->membase + offset);
> }
>
> -static inline void serial_out(struct uart_port *port, int offset, int value)
> +static inline void serial_out(struct uart_port *port, unsigned int offset,
> + int value)
> {
> writel_relaxed(value, port->membase + offset);
> }
> @@ -598,8 +600,7 @@ static void sprd_putc(struct uart_port *port, int c)
> writeb(c, port->membase + SPRD_TXD);
> }
>
> -static void sprd_early_write(struct console *con, const char *s,
> - unsigned n)
> +static void sprd_early_write(struct console *con, const char *s, unsigned int n)
> {
> struct earlycon_device *dev = con->data;
>
> --
> 1.9.1
>
^ permalink raw reply
* Re: [PATCH 5/5] serial: sprd: Fix the indentation issue
From: Chunyan Zhang @ 2018-09-04 6:57 UTC (permalink / raw)
To: Baolin Wang
Cc: Greg Kroah-Hartman, jslaby, Orson Zhai, Mark Brown, linux-serial,
Linux Kernel Mailing List
In-Reply-To: <5952d0e2189677a247a8efabf356347e1e087187.1533950271.git.baolin.wang@linaro.org>
On 11 August 2018 at 09:34, Baolin Wang <baolin.wang@linaro.org> wrote:
> Make the macros' definition and code have the same correct indentation.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
> ---
> drivers/tty/serial/sprd_serial.c | 46 +++++++++++++++++++---------------------
> 1 file changed, 22 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
> index 8d5c9cd..4287ca3 100644
> --- a/drivers/tty/serial/sprd_serial.c
> +++ b/drivers/tty/serial/sprd_serial.c
> @@ -68,24 +68,24 @@
> #define SPRD_LCR_DATA_LEN6 0x4
> #define SPRD_LCR_DATA_LEN7 0x8
> #define SPRD_LCR_DATA_LEN8 0xc
> -#define SPRD_LCR_PARITY (BIT(0) | BIT(1))
> +#define SPRD_LCR_PARITY (BIT(0) | BIT(1))
> #define SPRD_LCR_PARITY_EN 0x2
> #define SPRD_LCR_EVEN_PAR 0x0
> #define SPRD_LCR_ODD_PAR 0x1
>
> /* control register 1 */
> -#define SPRD_CTL1 0x001C
> +#define SPRD_CTL1 0x001C
> #define RX_HW_FLOW_CTL_THLD BIT(6)
> #define RX_HW_FLOW_CTL_EN BIT(7)
> #define TX_HW_FLOW_CTL_EN BIT(8)
> #define RX_TOUT_THLD_DEF 0x3E00
> -#define RX_HFC_THLD_DEF 0x40
> +#define RX_HFC_THLD_DEF 0x40
>
> /* fifo threshold register */
> #define SPRD_CTL2 0x0020
> -#define THLD_TX_EMPTY 0x40
> +#define THLD_TX_EMPTY 0x40
> #define THLD_TX_EMPTY_SHIFT 8
> -#define THLD_RX_FULL 0x40
> +#define THLD_RX_FULL 0x40
>
> /* config baud rate register */
> #define SPRD_CLKD0 0x0024
> @@ -95,11 +95,11 @@
> #define SPRD_CLKD1_SHIFT 16
>
> /* interrupt mask status register */
> -#define SPRD_IMSR 0x002C
> -#define SPRD_IMSR_RX_FIFO_FULL BIT(0)
> +#define SPRD_IMSR 0x002C
> +#define SPRD_IMSR_RX_FIFO_FULL BIT(0)
> #define SPRD_IMSR_TX_FIFO_EMPTY BIT(1)
> -#define SPRD_IMSR_BREAK_DETECT BIT(7)
> -#define SPRD_IMSR_TIMEOUT BIT(13)
> +#define SPRD_IMSR_BREAK_DETECT BIT(7)
> +#define SPRD_IMSR_TIMEOUT BIT(13)
>
> struct sprd_uart_port {
> struct uart_port port;
> @@ -229,7 +229,7 @@ static inline void sprd_rx(struct uart_port *port)
> port->icount.rx++;
>
> if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
> - SPRD_LSR_FE | SPRD_LSR_OE))
> + SPRD_LSR_FE | SPRD_LSR_OE))
> if (handle_lsr_errors(port, &lsr, &flag))
> continue;
> if (uart_handle_sysrq_char(port, ch))
> @@ -292,8 +292,8 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
> if (ims & SPRD_IMSR_TIMEOUT)
> serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT);
>
> - if (ims & (SPRD_IMSR_RX_FIFO_FULL |
> - SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT))
> + if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT |
> + SPRD_IMSR_TIMEOUT))
> sprd_rx(port);
>
> if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
> @@ -333,7 +333,7 @@ static int sprd_startup(struct uart_port *port)
> sp = container_of(port, struct sprd_uart_port, port);
> snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);
> ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,
> - IRQF_SHARED, sp->name, port);
> + IRQF_SHARED, sp->name, port);
> if (ret) {
> dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",
> port->irq, ret);
> @@ -361,8 +361,8 @@ static void sprd_shutdown(struct uart_port *port)
> }
>
> static void sprd_set_termios(struct uart_port *port,
> - struct ktermios *termios,
> - struct ktermios *old)
> + struct ktermios *termios,
> + struct ktermios *old)
> {
> unsigned int baud, quot;
> unsigned int lcr = 0, fc;
> @@ -480,8 +480,7 @@ static void sprd_config_port(struct uart_port *port, int flags)
> port->type = PORT_SPRD;
> }
>
> -static int sprd_verify_port(struct uart_port *port,
> - struct serial_struct *ser)
> +static int sprd_verify_port(struct uart_port *port, struct serial_struct *ser)
> {
> if (ser->type != PORT_SPRD)
> return -EINVAL;
> @@ -531,7 +530,7 @@ static void sprd_console_putchar(struct uart_port *port, int ch)
> }
>
> static void sprd_console_write(struct console *co, const char *s,
> - unsigned int count)
> + unsigned int count)
> {
> struct uart_port *port = &sprd_port[co->index]->port;
> int locked = 1;
> @@ -594,7 +593,7 @@ static void sprd_putc(struct uart_port *port, int c)
> unsigned int timeout = SPRD_TIMEOUT;
>
> while (timeout-- &&
> - !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
> + !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
> cpu_relax();
>
> writeb(c, port->membase + SPRD_TXD);
> @@ -607,9 +606,8 @@ static void sprd_early_write(struct console *con, const char *s, unsigned int n)
> uart_console_write(&dev->port, s, n, sprd_putc);
> }
>
> -static int __init sprd_early_console_setup(
> - struct earlycon_device *device,
> - const char *opt)
> +static int __init sprd_early_console_setup(struct earlycon_device *device,
> + const char *opt)
> {
> if (!device->port.membase)
> return -ENODEV;
> @@ -691,8 +689,8 @@ static int sprd_probe(struct platform_device *pdev)
>
> index = sprd_probe_dt_alias(index, &pdev->dev);
>
> - sprd_port[index] = devm_kzalloc(&pdev->dev,
> - sizeof(*sprd_port[index]), GFP_KERNEL);
> + sprd_port[index] = devm_kzalloc(&pdev->dev, sizeof(*sprd_port[index]),
> + GFP_KERNEL);
> if (!sprd_port[index])
> return -ENOMEM;
>
> --
> 1.9.1
>
^ permalink raw reply
* Re: [PATCH 01/25] tty: Change return type to void
From: Sergei Shtylyov @ 2018-09-04 10:45 UTC (permalink / raw)
To: Jaejoong Kim, linux-um, netdev, linux-mmc, linux-s390, devel,
greybus-dev, linuxppc-dev, linux-serial, sparclinux, linux-usb,
linux-bluetooth, linux-kernel
Cc: Greg Kroah-Hartman, Jiri Slaby
In-Reply-To: <1536029091-4426-2-git-send-email-climbbb.kim@gmail.com>
Hello!
On 9/4/2018 5:44 AM, Jaejoong Kim wrote:
> Many drivers with tty use the tty_stand_install(). But, there is no
> need to handle the error, since it always returns 0. So, change the
> return type of tty_standard_install() and tty_port_install() to void
> type and remove unnecessary exception handling where we use these
> functions.
>
> Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
> ---
> drivers/tty/tty_io.c | 10 ++++++----
> drivers/tty/tty_port.c | 4 ++--
> include/linux/tty.h | 4 ++--
> 3 files changed, 10 insertions(+), 8 deletions(-)
>
[...]
> diff --git a/include/linux/tty.h b/include/linux/tty.h
> index c56e397..63cdac1 100644
> --- a/include/linux/tty.h
> +++ b/include/linux/tty.h
> @@ -556,7 +556,7 @@ extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
> extern void tty_release_struct(struct tty_struct *tty, int idx);
> extern int tty_release(struct inode *inode, struct file *filp);
> extern void tty_init_termios(struct tty_struct *tty);
> -extern int tty_standard_install(struct tty_driver *driver,
> +extern void tty_standard_install(struct tty_driver *driver,
> struct tty_struct *tty);
>
> extern struct mutex tty_mutex;
> @@ -688,7 +688,7 @@ extern int tty_port_close_start(struct tty_port *port,
> extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
> extern void tty_port_close(struct tty_port *port,
> struct tty_struct *tty, struct file *filp);
> -extern int tty_port_install(struct tty_port *port, struct tty_driver *driver,
> +extern void tty_port_install(struct tty_port *port, struct tty_driver *driver,
> struct tty_struct *tty);
You need to update all the callers in the same patch -- the kernel must
remain buildable after each patch but you seem to have spread that update
among a lot of patches..
[...]
MBR, Sergei
^ permalink raw reply
* [PATCH v12 0/6] Driver for at91 usart in spi mode
From: Radu Pirea @ 2018-09-04 11:13 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, nicolas.ferre,
alexandre.belloni, gregkh, broonie, jslaby, richard.genoud, davem,
mchehab+samsung, akpm, arnd
Cc: devicetree, Radu Pirea, linux-kernel, linux-spi, linux-serial,
linux-arm-kernel
Hi,
Well, this is the 12th version of this patch series.
In this version I fixed a warning from kbuild-robot and I have no idea
how I forgot to add static in declaration of that functions. Also I
fixed the example for the SPI driver in bindings.
Currently I am not working for Microchip, but I will continue to
maintain and improve this driver. So yes, this is the reason that
I changed my email address from MAINTAINERS file.
Changes in v12:
- fixed interrupts property in example from bindings of SPI driver
- changed email address in MAINTAINERS
- added static to declaration of few functions in SPI
driver(kbuild-robot warning)
Changes in v11:
- removed "depends on HAS_DMA" from drivers/spi/Kconfig because the driver has
no dma support
- changed "selects MFD_AT91_USART" to "depends on MFD_AT91_USART" in
drivers/spi/Kconfig
- changed comment style in spi-at91-usart.c
Changes in v10:
-fixed kbuild test robot warning
Changes in v9:
- minor changes
- rebased on top of broonie/for-4.19
Changes in v8:
- fixed passing an empty mfd cell if "atmel,usart-mode" value is invalid
Changes in v7:
- synced up SPDIX license with module license
- numbering of usart modes starts from 0 insteand of 1
Changes in v6:
- removed unused compatible strings from serial and spi drivers
Changes in v5:
- fixed usage of stdout-path property with atmel_serial driver
Changes in v4:
- modified the spi driver to use cs gpio support form spi subsystem
- fixed dma transfers for serial driver
- squashed binding for spi and serial and moved them to mfd/atmel-usart.txt
Changes in v3:
- fixed spi slaves probing
Changes in v2:
- added at91-usart mfd driver
- modified spi-at91-usart driver to work as mfd driver child
- modified atmel_serial driver to work as mfd driver child
Changes in v1:
- added spi-at91-usart driver
Radu Pirea (6):
MAINTAINERS: add at91 usart mfd driver
dt-bindings: add binding for atmel-usart in SPI mode
mfd: at91-usart: added mfd driver for usart
MAINTAINERS: add at91 usart spi driver
spi: at91-usart: add driver for at91-usart as spi
tty/serial: atmel: change the driver to work under at91-usart mfd
.../bindings/{serial => mfd}/atmel-usart.txt | 25 +-
MAINTAINERS | 16 +
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/at91-usart.c | 71 +++
drivers/spi/Kconfig | 8 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-at91-usart.c | 432 ++++++++++++++++++
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/atmel_serial.c | 42 +-
include/dt-bindings/mfd/at91-usart.h | 17 +
11 files changed, 606 insertions(+), 17 deletions(-)
rename Documentation/devicetree/bindings/{serial => mfd}/atmel-usart.txt (76%)
create mode 100644 drivers/mfd/at91-usart.c
create mode 100644 drivers/spi/spi-at91-usart.c
create mode 100644 include/dt-bindings/mfd/at91-usart.h
--
2.18.0
^ permalink raw reply
* [PATCH v12 1/6] MAINTAINERS: add at91 usart mfd driver
From: Radu Pirea @ 2018-09-04 11:13 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, nicolas.ferre,
alexandre.belloni, gregkh, broonie, jslaby, richard.genoud, davem,
mchehab+samsung, akpm, arnd
Cc: devicetree, linux-kernel, linux-spi, linux-serial, Radu Pirea,
linux-arm-kernel
In-Reply-To: <20180904111310.4049-1-radu_nicolae.pirea@upb.ro>
From: Radu Pirea <radu.pirea@microchip.com>
Added entry for at91 usart mfd driver.
Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
MAINTAINERS | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 544cac829cf4..8aeaa2cc3e14 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9322,6 +9322,7 @@ M: Richard Genoud <richard.genoud@gmail.com>
S: Maintained
F: drivers/tty/serial/atmel_serial.c
F: drivers/tty/serial/atmel_serial.h
+F: Documentation/devicetree/bindings/mfd/atmel-usart.txt
MICROCHIP / ATMEL DMA DRIVER
M: Ludovic Desroches <ludovic.desroches@microchip.com>
@@ -9354,6 +9355,14 @@ S: Supported
F: drivers/mtd/nand/raw/atmel/*
F: Documentation/devicetree/bindings/mtd/atmel-nand.txt
+MICROCHIP AT91 USART MFD DRIVER
+M: Radu Pirea <radu_nicolae.pirea@upb.ro>
+L: linux-kernel@vger.kernel.org
+S: Supported
+F: drivers/mfd/at91-usart.c
+F: include/dt-bindings/mfd/at91-usart.h
+F: Documentation/devicetree/bindings/mfd/atmel-usart.txt
+
MICROCHIP KSZ SERIES ETHERNET SWITCH DRIVER
M: Woojung Huh <Woojung.Huh@microchip.com>
M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
--
2.18.0
^ permalink raw reply related
* [PATCH v12 2/6] dt-bindings: add binding for atmel-usart in SPI mode
From: Radu Pirea @ 2018-09-04 11:13 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, nicolas.ferre,
alexandre.belloni, gregkh, broonie, jslaby, richard.genoud, davem,
mchehab+samsung, akpm, arnd
Cc: devicetree, linux-kernel, linux-spi, linux-serial, Radu Pirea,
linux-arm-kernel
In-Reply-To: <20180904111310.4049-1-radu_nicolae.pirea@upb.ro>
From: Radu Pirea <radu.pirea@microchip.com>
This patch moves the bindings for serial from serial/atmel-usart.txt to
mfd/atmel-usart.txt and adds bindings for USART in SPI mode.
Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
.../bindings/{serial => mfd}/atmel-usart.txt | 25 +++++++++++++++++--
include/dt-bindings/mfd/at91-usart.h | 17 +++++++++++++
2 files changed, 40 insertions(+), 2 deletions(-)
rename Documentation/devicetree/bindings/{serial => mfd}/atmel-usart.txt (76%)
create mode 100644 include/dt-bindings/mfd/at91-usart.h
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
similarity index 76%
rename from Documentation/devicetree/bindings/serial/atmel-usart.txt
rename to Documentation/devicetree/bindings/mfd/atmel-usart.txt
index 7c0d6b2f53e4..7f0cd72f47d2 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
@@ -1,6 +1,6 @@
* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
-Required properties:
+Required properties for USART:
- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
The compatible <chip> indicated will be the first SoC to support an
additional mode or an USART new feature.
@@ -11,7 +11,13 @@ Required properties:
Required elements: "usart"
- clocks: phandles to input clocks.
-Optional properties:
+Required properties for USART in SPI mode:
+- #size-cells : Must be <0>
+- #address-cells : Must be <1>
+- cs-gpios: chipselects (internal cs not supported)
+- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)
+
+Optional properties in serial mode:
- atmel,use-dma-rx: use of PDC or DMA for receiving data
- atmel,use-dma-tx: use of PDC or DMA for transmitting data
- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
@@ -62,3 +68,18 @@ Example:
dma-names = "tx", "rx";
atmel,fifo-size = <32>;
};
+
+- SPI mode:
+ #include <dt-bindings/mfd/at91-usart.h>
+
+ spi0: spi@f001c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart";
+ atmel,usart-mode = <AT91_USART_MODE_SPI>;
+ reg = <0xf001c000 0x100>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
+ cs-gpios = <&pioB 3 0>;
+ };
diff --git a/include/dt-bindings/mfd/at91-usart.h b/include/dt-bindings/mfd/at91-usart.h
new file mode 100644
index 000000000000..2de5bc312e1e
--- /dev/null
+++ b/include/dt-bindings/mfd/at91-usart.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides macros for AT91 USART DT bindings.
+ *
+ * Copyright (C) 2018 Microchip Technology
+ *
+ * Author: Radu Pirea <radu.pirea@microchip.com>
+ *
+ */
+
+#ifndef __DT_BINDINGS_AT91_USART_H__
+#define __DT_BINDINGS_AT91_USART_H__
+
+#define AT91_USART_MODE_SERIAL 0
+#define AT91_USART_MODE_SPI 1
+
+#endif /* __DT_BINDINGS_AT91_USART_H__ */
--
2.18.0
^ permalink raw reply related
* [PATCH v12 3/6] mfd: at91-usart: added mfd driver for usart
From: Radu Pirea @ 2018-09-04 11:13 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, nicolas.ferre,
alexandre.belloni, gregkh, broonie, jslaby, richard.genoud, davem,
mchehab+samsung, akpm, arnd
Cc: devicetree, linux-kernel, linux-spi, linux-serial, Radu Pirea,
linux-arm-kernel
In-Reply-To: <20180904111310.4049-1-radu_nicolae.pirea@upb.ro>
From: Radu Pirea <radu.pirea@microchip.com>
This mfd driver is just a wrapper over atmel_serial driver and
spi-at91-usart driver. Selection of one of the drivers is based on a
property from device tree. If the property is not specified, the default
driver is atmel_serial.
Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
drivers/mfd/Kconfig | 9 +++++
drivers/mfd/Makefile | 1 +
drivers/mfd/at91-usart.c | 71 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 81 insertions(+)
create mode 100644 drivers/mfd/at91-usart.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b860eb5aa194..a886672b960d 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -99,6 +99,15 @@ config MFD_AAT2870_CORE
additional drivers must be enabled in order to use the
functionality of the device.
+config MFD_AT91_USART
+ tristate "AT91 USART Driver"
+ select MFD_CORE
+ help
+ Select this to get support for AT91 USART IP. This is a wrapper
+ over at91-usart-serial driver and usart-spi-driver. Only one function
+ can be used at a time. The choice is done at boot time by the probe
+ function of this MFD driver according to a device tree property.
+
config MFD_ATMEL_FLEXCOM
tristate "Atmel Flexcom (Flexible Serial Communication Unit)"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index e9fd20dba18d..c7e66928abb9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -184,6 +184,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
+obj-$(CONFIG_MFD_AT91_USART) += at91-usart.o
obj-$(CONFIG_MFD_ATMEL_FLEXCOM) += atmel-flexcom.o
obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
obj-$(CONFIG_MFD_ATMEL_SMC) += atmel-smc.o
diff --git a/drivers/mfd/at91-usart.c b/drivers/mfd/at91-usart.c
new file mode 100644
index 000000000000..a4b9929c156f
--- /dev/null
+++ b/drivers/mfd/at91-usart.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for AT91 USART
+ *
+ * Copyright (C) 2018 Microchip Technology
+ *
+ * Author: Radu Pirea <radu.pirea@microchip.com>
+ *
+ */
+
+#include <dt-bindings/mfd/at91-usart.h>
+
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/property.h>
+
+static struct mfd_cell at91_usart_spi_subdev = {
+ .name = "at91_usart_spi",
+ .of_compatible = "microchip,at91sam9g45-usart-spi",
+ };
+
+static struct mfd_cell at91_usart_serial_subdev = {
+ .name = "atmel_usart_serial",
+ .of_compatible = "atmel,at91rm9200-usart-serial",
+ };
+
+static int at91_usart_mode_probe(struct platform_device *pdev)
+{
+ struct mfd_cell cell;
+ u32 opmode = AT91_USART_MODE_SERIAL;
+
+ device_property_read_u32(&pdev->dev, "atmel,usart-mode", &opmode);
+
+ switch (opmode) {
+ case AT91_USART_MODE_SPI:
+ cell = at91_usart_spi_subdev;
+ break;
+ case AT91_USART_MODE_SERIAL:
+ cell = at91_usart_serial_subdev;
+ break;
+ default:
+ dev_err(&pdev->dev, "atmel,usart-mode has an invalid value %u\n",
+ opmode);
+ return -EINVAL;
+ }
+
+ return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, &cell, 1,
+ NULL, 0, NULL);
+}
+
+static const struct of_device_id at91_usart_mode_of_match[] = {
+ { .compatible = "atmel,at91rm9200-usart" },
+ { .compatible = "atmel,at91sam9260-usart" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_usart_mode_of_match);
+
+static struct platform_driver at91_usart_mfd = {
+ .probe = at91_usart_mode_probe,
+ .driver = {
+ .name = "at91_usart_mode",
+ .of_match_table = at91_usart_mode_of_match,
+ },
+};
+
+module_platform_driver(at91_usart_mfd);
+
+MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
+MODULE_DESCRIPTION("AT91 USART MFD driver");
+MODULE_LICENSE("GPL v2");
--
2.18.0
^ permalink raw reply related
* [PATCH v12 4/6] MAINTAINERS: add at91 usart spi driver
From: Radu Pirea @ 2018-09-04 11:13 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, nicolas.ferre,
alexandre.belloni, gregkh, broonie, jslaby, richard.genoud, davem,
mchehab+samsung, akpm, arnd
Cc: devicetree, linux-kernel, linux-spi, linux-serial, Radu Pirea,
linux-arm-kernel
In-Reply-To: <20180904111310.4049-1-radu_nicolae.pirea@upb.ro>
From: Radu Pirea <radu.pirea@microchip.com>
Added entry for at91 usart mfd driver.
Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 8aeaa2cc3e14..1bb477aab33b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9363,6 +9363,13 @@ F: drivers/mfd/at91-usart.c
F: include/dt-bindings/mfd/at91-usart.h
F: Documentation/devicetree/bindings/mfd/atmel-usart.txt
+MICROCHIP AT91 USART SPI DRIVER
+M: Radu Pirea <radu_nicolae.pirea@upb.ro>
+L: linux-spi@vger.kernel.org
+S: Supported
+F: drivers/spi/spi-at91-usart.c
+F: Documentation/devicetree/bindings/mfd/atmel-usart.txt
+
MICROCHIP KSZ SERIES ETHERNET SWITCH DRIVER
M: Woojung Huh <Woojung.Huh@microchip.com>
M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
--
2.18.0
^ permalink raw reply related
* [PATCH v12 5/6] spi: at91-usart: add driver for at91-usart as spi
From: Radu Pirea @ 2018-09-04 11:13 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, nicolas.ferre,
alexandre.belloni, gregkh, broonie, jslaby, richard.genoud, davem,
mchehab+samsung, akpm, arnd
Cc: devicetree, linux-kernel, linux-spi, linux-serial, Radu Pirea,
linux-arm-kernel
In-Reply-To: <20180904111310.4049-1-radu_nicolae.pirea@upb.ro>
From: Radu Pirea <radu.pirea@microchip.com>
This is the driver for at91-usart in spi mode. The USART IP can be configured
to work in many modes and one of them is SPI.
The driver was tested on sama5d3-xplained and sama5d4-xplained boards with
enc28j60 ethernet controller as slave.
Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
drivers/spi/Kconfig | 8 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-at91-usart.c | 432 +++++++++++++++++++++++++++++++++++
3 files changed, 441 insertions(+)
create mode 100644 drivers/spi/spi-at91-usart.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ad5d68e1dab7..6d9e309fab67 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -83,6 +83,14 @@ config SPI_ATMEL
This selects a driver for the Atmel SPI Controller, present on
many AT91 ARM chips.
+config SPI_AT91_USART
+ tristate "Atmel USART Controller SPI driver"
+ depends on (ARCH_AT91 || COMPILE_TEST)
+ depends on MFD_AT91_USART
+ help
+ This selects a driver for the AT91 USART Controller as SPI Master,
+ present on AT91 and SAMA5 SoC series.
+
config SPI_AU1550
tristate "Au1550/Au1200/Au1300 SPI Controller"
depends on MIPS_ALCHEMY
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index cb1f4378b87c..901ff606e6e5 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_LOOPBACK_TEST) += spi-loopback-test.o
obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
obj-$(CONFIG_SPI_ARMADA_3700) += spi-armada-3700.o
obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
+obj-$(CONFIG_SPI_AT91_USART) += spi-at91-usart.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
obj-$(CONFIG_SPI_AXI_SPI_ENGINE) += spi-axi-spi-engine.o
diff --git a/drivers/spi/spi-at91-usart.c b/drivers/spi/spi-at91-usart.c
new file mode 100644
index 000000000000..a924657642fa
--- /dev/null
+++ b/drivers/spi/spi-at91-usart.c
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Driver for AT91 USART Controllers as SPI
+//
+// Copyright (C) 2018 Microchip Technology Inc.
+//
+// Author: Radu Pirea <radu.pirea@microchip.com>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+
+#define US_CR 0x00
+#define US_MR 0x04
+#define US_IER 0x08
+#define US_IDR 0x0C
+#define US_CSR 0x14
+#define US_RHR 0x18
+#define US_THR 0x1C
+#define US_BRGR 0x20
+#define US_VERSION 0xFC
+
+#define US_CR_RSTRX BIT(2)
+#define US_CR_RSTTX BIT(3)
+#define US_CR_RXEN BIT(4)
+#define US_CR_RXDIS BIT(5)
+#define US_CR_TXEN BIT(6)
+#define US_CR_TXDIS BIT(7)
+
+#define US_MR_SPI_MASTER 0x0E
+#define US_MR_CHRL GENMASK(7, 6)
+#define US_MR_CPHA BIT(8)
+#define US_MR_CPOL BIT(16)
+#define US_MR_CLKO BIT(18)
+#define US_MR_WRDBT BIT(20)
+#define US_MR_LOOP BIT(15)
+
+#define US_IR_RXRDY BIT(0)
+#define US_IR_TXRDY BIT(1)
+#define US_IR_OVRE BIT(5)
+
+#define US_BRGR_SIZE BIT(16)
+
+#define US_MIN_CLK_DIV 0x06
+#define US_MAX_CLK_DIV BIT(16)
+
+#define US_RESET (US_CR_RSTRX | US_CR_RSTTX)
+#define US_DISABLE (US_CR_RXDIS | US_CR_TXDIS)
+#define US_ENABLE (US_CR_RXEN | US_CR_TXEN)
+#define US_OVRE_RXRDY_IRQS (US_IR_OVRE | US_IR_RXRDY)
+
+#define US_INIT \
+ (US_MR_SPI_MASTER | US_MR_CHRL | US_MR_CLKO | US_MR_WRDBT)
+
+/* Register access macros */
+#define at91_usart_spi_readl(port, reg) \
+ readl_relaxed((port)->regs + US_##reg)
+#define at91_usart_spi_writel(port, reg, value) \
+ writel_relaxed((value), (port)->regs + US_##reg)
+
+#define at91_usart_spi_readb(port, reg) \
+ readb_relaxed((port)->regs + US_##reg)
+#define at91_usart_spi_writeb(port, reg, value) \
+ writeb_relaxed((value), (port)->regs + US_##reg)
+
+struct at91_usart_spi {
+ struct spi_transfer *current_transfer;
+ void __iomem *regs;
+ struct device *dev;
+ struct clk *clk;
+
+ /*used in interrupt to protect data reading*/
+ spinlock_t lock;
+
+ int irq;
+ unsigned int current_tx_remaining_bytes;
+ unsigned int current_rx_remaining_bytes;
+
+ u32 spi_clk;
+ u32 status;
+
+ bool xfer_failed;
+};
+
+static inline u32 at91_usart_spi_tx_ready(struct at91_usart_spi *aus)
+{
+ return aus->status & US_IR_TXRDY;
+}
+
+static inline u32 at91_usart_spi_rx_ready(struct at91_usart_spi *aus)
+{
+ return aus->status & US_IR_RXRDY;
+}
+
+static inline u32 at91_usart_spi_check_overrun(struct at91_usart_spi *aus)
+{
+ return aus->status & US_IR_OVRE;
+}
+
+static inline u32 at91_usart_spi_read_status(struct at91_usart_spi *aus)
+{
+ aus->status = at91_usart_spi_readl(aus, CSR);
+ return aus->status;
+}
+
+static inline void at91_usart_spi_tx(struct at91_usart_spi *aus)
+{
+ unsigned int len = aus->current_transfer->len;
+ unsigned int remaining = aus->current_tx_remaining_bytes;
+ const u8 *tx_buf = aus->current_transfer->tx_buf;
+
+ if (!remaining)
+ return;
+
+ if (at91_usart_spi_tx_ready(aus)) {
+ at91_usart_spi_writeb(aus, THR, tx_buf[len - remaining]);
+ aus->current_tx_remaining_bytes--;
+ }
+}
+
+static inline void at91_usart_spi_rx(struct at91_usart_spi *aus)
+{
+ int len = aus->current_transfer->len;
+ int remaining = aus->current_rx_remaining_bytes;
+ u8 *rx_buf = aus->current_transfer->rx_buf;
+
+ if (!remaining)
+ return;
+
+ rx_buf[len - remaining] = at91_usart_spi_readb(aus, RHR);
+ aus->current_rx_remaining_bytes--;
+}
+
+static inline void
+at91_usart_spi_set_xfer_speed(struct at91_usart_spi *aus,
+ struct spi_transfer *xfer)
+{
+ at91_usart_spi_writel(aus, BRGR,
+ DIV_ROUND_UP(aus->spi_clk, xfer->speed_hz));
+}
+
+static irqreturn_t at91_usart_spi_interrupt(int irq, void *dev_id)
+{
+ struct spi_controller *controller = dev_id;
+ struct at91_usart_spi *aus = spi_master_get_devdata(controller);
+
+ spin_lock(&aus->lock);
+ at91_usart_spi_read_status(aus);
+
+ if (at91_usart_spi_check_overrun(aus)) {
+ aus->xfer_failed = true;
+ at91_usart_spi_writel(aus, IDR, US_IR_OVRE | US_IR_RXRDY);
+ spin_unlock(&aus->lock);
+ return IRQ_HANDLED;
+ }
+
+ if (at91_usart_spi_rx_ready(aus)) {
+ at91_usart_spi_rx(aus);
+ spin_unlock(&aus->lock);
+ return IRQ_HANDLED;
+ }
+
+ spin_unlock(&aus->lock);
+
+ return IRQ_NONE;
+}
+
+static int at91_usart_spi_setup(struct spi_device *spi)
+{
+ struct at91_usart_spi *aus = spi_master_get_devdata(spi->controller);
+ u32 *ausd = spi->controller_state;
+ unsigned int mr = at91_usart_spi_readl(aus, MR);
+ u8 bits = spi->bits_per_word;
+
+ if (bits != 8) {
+ dev_dbg(&spi->dev, "Only 8 bits per word are supported\n");
+ return -EINVAL;
+ }
+
+ if (spi->mode & SPI_CPOL)
+ mr |= US_MR_CPOL;
+ else
+ mr &= ~US_MR_CPOL;
+
+ if (spi->mode & SPI_CPHA)
+ mr |= US_MR_CPHA;
+ else
+ mr &= ~US_MR_CPHA;
+
+ if (spi->mode & SPI_LOOP)
+ mr |= US_MR_LOOP;
+ else
+ mr &= ~US_MR_LOOP;
+
+ if (!ausd) {
+ ausd = kzalloc(sizeof(*ausd), GFP_KERNEL);
+ if (!ausd)
+ return -ENOMEM;
+
+ spi->controller_state = ausd;
+ }
+
+ *ausd = mr;
+
+ dev_dbg(&spi->dev,
+ "setup: bpw %u mode 0x%x -> mr %d %08x\n",
+ bits, spi->mode, spi->chip_select, mr);
+
+ return 0;
+}
+
+static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+
+ at91_usart_spi_set_xfer_speed(aus, xfer);
+ aus->xfer_failed = false;
+ aus->current_transfer = xfer;
+ aus->current_tx_remaining_bytes = xfer->len;
+ aus->current_rx_remaining_bytes = xfer->len;
+
+ while ((aus->current_tx_remaining_bytes ||
+ aus->current_rx_remaining_bytes) && !aus->xfer_failed) {
+ at91_usart_spi_read_status(aus);
+ at91_usart_spi_tx(aus);
+ cpu_relax();
+ }
+
+ if (aus->xfer_failed) {
+ dev_err(aus->dev, "Overrun!\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int at91_usart_spi_prepare_message(struct spi_controller *ctlr,
+ struct spi_message *message)
+{
+ struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+ struct spi_device *spi = message->spi;
+ u32 *ausd = spi->controller_state;
+
+ at91_usart_spi_writel(aus, CR, US_ENABLE);
+ at91_usart_spi_writel(aus, IER, US_OVRE_RXRDY_IRQS);
+ at91_usart_spi_writel(aus, MR, *ausd);
+
+ return 0;
+}
+
+static int at91_usart_spi_unprepare_message(struct spi_controller *ctlr,
+ struct spi_message *message)
+{
+ struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+
+ at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
+ at91_usart_spi_writel(aus, IDR, US_OVRE_RXRDY_IRQS);
+
+ return 0;
+}
+
+static void at91_usart_spi_cleanup(struct spi_device *spi)
+{
+ struct at91_usart_spi_device *ausd = spi->controller_state;
+
+ spi->controller_state = NULL;
+ kfree(ausd);
+}
+
+static void at91_usart_spi_init(struct at91_usart_spi *aus)
+{
+ at91_usart_spi_writel(aus, MR, US_INIT);
+ at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
+}
+
+static int at91_usart_gpio_setup(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.parent->of_node;
+ int i;
+ int ret;
+ int nb;
+
+ if (!np)
+ return -EINVAL;
+
+ nb = of_gpio_named_count(np, "cs-gpios");
+ for (i = 0; i < nb; i++) {
+ int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
+
+ if (cs_gpio < 0)
+ return cs_gpio;
+
+ if (gpio_is_valid(cs_gpio)) {
+ ret = devm_gpio_request_one(&pdev->dev, cs_gpio,
+ GPIOF_DIR_OUT,
+ dev_name(&pdev->dev));
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int at91_usart_spi_probe(struct platform_device *pdev)
+{
+ struct resource *regs;
+ struct spi_controller *controller;
+ struct at91_usart_spi *aus;
+ struct clk *clk;
+ int irq;
+ int ret;
+
+ regs = platform_get_resource(to_platform_device(pdev->dev.parent),
+ IORESOURCE_MEM, 0);
+ if (!regs)
+ return -EINVAL;
+
+ irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
+ if (irq < 0)
+ return irq;
+
+ clk = devm_clk_get(pdev->dev.parent, "usart");
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ ret = -ENOMEM;
+ controller = spi_alloc_master(&pdev->dev, sizeof(*aus));
+ if (!controller)
+ goto at91_usart_spi_probe_fail;
+
+ ret = at91_usart_gpio_setup(pdev);
+ if (ret)
+ goto at91_usart_spi_probe_fail;
+
+ controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
+ controller->dev.of_node = pdev->dev.parent->of_node;
+ controller->bits_per_word_mask = SPI_BPW_MASK(8);
+ controller->setup = at91_usart_spi_setup;
+ controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
+ controller->transfer_one = at91_usart_spi_transfer_one;
+ controller->prepare_message = at91_usart_spi_prepare_message;
+ controller->unprepare_message = at91_usart_spi_unprepare_message;
+ controller->cleanup = at91_usart_spi_cleanup;
+ controller->max_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
+ US_MIN_CLK_DIV);
+ controller->min_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
+ US_MAX_CLK_DIV);
+ platform_set_drvdata(pdev, controller);
+
+ aus = spi_master_get_devdata(controller);
+
+ aus->dev = &pdev->dev;
+ aus->regs = devm_ioremap_resource(&pdev->dev, regs);
+ if (IS_ERR(aus->regs)) {
+ ret = PTR_ERR(aus->regs);
+ goto at91_usart_spi_probe_fail;
+ }
+
+ aus->irq = irq;
+ aus->clk = clk;
+
+ ret = devm_request_irq(&pdev->dev, irq, at91_usart_spi_interrupt, 0,
+ dev_name(&pdev->dev), controller);
+ if (ret)
+ goto at91_usart_spi_probe_fail;
+
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto at91_usart_spi_probe_fail;
+
+ aus->spi_clk = clk_get_rate(clk);
+ at91_usart_spi_init(aus);
+
+ spin_lock_init(&aus->lock);
+ ret = devm_spi_register_master(&pdev->dev, controller);
+ if (ret)
+ goto at91_usart_fail_register_master;
+
+ dev_info(&pdev->dev,
+ "AT91 USART SPI Controller version 0x%x at %pa (irq %d)\n",
+ at91_usart_spi_readl(aus, VERSION),
+ ®s->start, irq);
+
+ return 0;
+
+at91_usart_fail_register_master:
+ clk_disable_unprepare(clk);
+at91_usart_spi_probe_fail:
+ spi_master_put(controller);
+ return ret;
+}
+
+static int at91_usart_spi_remove(struct platform_device *pdev)
+{
+ struct spi_controller *ctlr = platform_get_drvdata(pdev);
+ struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+
+ clk_disable_unprepare(aus->clk);
+
+ return 0;
+}
+
+static const struct of_device_id at91_usart_spi_dt_ids[] = {
+ { .compatible = "microchip,at91sam9g45-usart-spi"},
+ { /* sentinel */}
+};
+
+MODULE_DEVICE_TABLE(of, at91_usart_spi_dt_ids);
+
+static struct platform_driver at91_usart_spi_driver = {
+ .driver = {
+ .name = "at91_usart_spi",
+ },
+ .probe = at91_usart_spi_probe,
+ .remove = at91_usart_spi_remove,
+};
+
+module_platform_driver(at91_usart_spi_driver);
+
+MODULE_DESCRIPTION("Microchip AT91 USART SPI Controller driver");
+MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:at91_usart_spi");
--
2.18.0
^ permalink raw reply related
* [PATCH v12 6/6] tty/serial: atmel: change the driver to work under at91-usart mfd
From: Radu Pirea @ 2018-09-04 11:13 UTC (permalink / raw)
To: lee.jones, robh+dt, mark.rutland, nicolas.ferre,
alexandre.belloni, gregkh, broonie, jslaby, richard.genoud, davem,
mchehab+samsung, akpm, arnd
Cc: devicetree, linux-kernel, linux-spi, linux-serial, Radu Pirea,
linux-arm-kernel
In-Reply-To: <20180904111310.4049-1-radu_nicolae.pirea@upb.ro>
From: Radu Pirea <radu.pirea@microchip.com>
This patch modifies the place where resources and device tree properties
are searched.
Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/atmel_serial.c | 42 ++++++++++++++++++++-----------
2 files changed, 28 insertions(+), 15 deletions(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index df8bd0c7b97d..32886c304641 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -118,6 +118,7 @@ config SERIAL_ATMEL
depends on ARCH_AT91 || COMPILE_TEST
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
+ select MFD_AT91_USART
help
This enables the driver for the on-chip UARTs of the Atmel
AT91 processors.
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 8e4428725848..267d4d1de3f8 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -193,8 +193,7 @@ static struct console atmel_console;
#if defined(CONFIG_OF)
static const struct of_device_id atmel_serial_dt_ids[] = {
- { .compatible = "atmel,at91rm9200-usart" },
- { .compatible = "atmel,at91sam9260-usart" },
+ { .compatible = "atmel,at91rm9200-usart-serial" },
{ /* sentinel */ }
};
#endif
@@ -915,6 +914,7 @@ static void atmel_tx_dma(struct uart_port *port)
static int atmel_prepare_tx_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct device *mfd_dev = port->dev->parent;
dma_cap_mask_t mask;
struct dma_slave_config config;
int ret, nent;
@@ -922,7 +922,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- atmel_port->chan_tx = dma_request_slave_channel(port->dev, "tx");
+ atmel_port->chan_tx = dma_request_slave_channel(mfd_dev, "tx");
if (atmel_port->chan_tx == NULL)
goto chan_err;
dev_info(port->dev, "using %s for tx DMA transfers\n",
@@ -1093,6 +1093,7 @@ static void atmel_rx_from_dma(struct uart_port *port)
static int atmel_prepare_rx_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct device *mfd_dev = port->dev->parent;
struct dma_async_tx_descriptor *desc;
dma_cap_mask_t mask;
struct dma_slave_config config;
@@ -1104,7 +1105,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
dma_cap_zero(mask);
dma_cap_set(DMA_CYCLIC, mask);
- atmel_port->chan_rx = dma_request_slave_channel(port->dev, "rx");
+ atmel_port->chan_rx = dma_request_slave_channel(mfd_dev, "rx");
if (atmel_port->chan_rx == NULL)
goto chan_err;
dev_info(port->dev, "using %s for rx DMA transfers\n",
@@ -2222,8 +2223,8 @@ static const char *atmel_type(struct uart_port *port)
*/
static void atmel_release_port(struct uart_port *port)
{
- struct platform_device *pdev = to_platform_device(port->dev);
- int size = pdev->resource[0].end - pdev->resource[0].start + 1;
+ struct platform_device *mpdev = to_platform_device(port->dev->parent);
+ int size = resource_size(mpdev->resource);
release_mem_region(port->mapbase, size);
@@ -2238,8 +2239,8 @@ static void atmel_release_port(struct uart_port *port)
*/
static int atmel_request_port(struct uart_port *port)
{
- struct platform_device *pdev = to_platform_device(port->dev);
- int size = pdev->resource[0].end - pdev->resource[0].start + 1;
+ struct platform_device *mpdev = to_platform_device(port->dev->parent);
+ int size = resource_size(mpdev->resource);
if (!request_mem_region(port->mapbase, size, "atmel_serial"))
return -EBUSY;
@@ -2341,27 +2342,28 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
{
int ret;
struct uart_port *port = &atmel_port->uart;
+ struct platform_device *mpdev = to_platform_device(pdev->dev.parent);
atmel_init_property(atmel_port, pdev);
atmel_set_ops(port);
- uart_get_rs485_mode(&pdev->dev, &port->rs485);
+ uart_get_rs485_mode(&mpdev->dev, &port->rs485);
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
port->ops = &atmel_pops;
port->fifosize = 1;
port->dev = &pdev->dev;
- port->mapbase = pdev->resource[0].start;
- port->irq = pdev->resource[1].start;
+ port->mapbase = mpdev->resource[0].start;
+ port->irq = mpdev->resource[1].start;
port->rs485_config = atmel_config_rs485;
- port->membase = NULL;
+ port->membase = NULL;
memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
/* for console, the clock could already be configured */
if (!atmel_port->clk) {
- atmel_port->clk = clk_get(&pdev->dev, "usart");
+ atmel_port->clk = clk_get(&mpdev->dev, "usart");
if (IS_ERR(atmel_port->clk)) {
ret = PTR_ERR(atmel_port->clk);
atmel_port->clk = NULL;
@@ -2694,13 +2696,22 @@ static void atmel_serial_probe_fifos(struct atmel_uart_port *atmel_port,
static int atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *atmel_port;
- struct device_node *np = pdev->dev.of_node;
+ struct device_node *np = pdev->dev.parent->of_node;
void *data;
int ret = -ENODEV;
bool rs485_enabled;
BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
+ /*
+ * In device tree there is no node with "atmel,at91rm9200-usart-serial"
+ * as compatible string. This driver is probed by at91-usart mfd driver
+ * which is just a wrapper over the atmel_serial driver and
+ * spi-at91-usart driver. All attributes needed by this driver are
+ * found in of_node of parent.
+ */
+ pdev->dev.of_node = np;
+
ret = of_alias_get_id(np, "serial");
if (ret < 0)
/* port id not found in platform data nor device-tree aliases:
@@ -2836,6 +2847,7 @@ static int atmel_serial_remove(struct platform_device *pdev)
clk_put(atmel_port->clk);
atmel_port->clk = NULL;
+ pdev->dev.of_node = NULL;
return ret;
}
@@ -2846,7 +2858,7 @@ static struct platform_driver atmel_serial_driver = {
.suspend = atmel_serial_suspend,
.resume = atmel_serial_resume,
.driver = {
- .name = "atmel_usart",
+ .name = "atmel_usart_serial",
.of_match_table = of_match_ptr(atmel_serial_dt_ids),
},
};
--
2.18.0
^ permalink raw reply related
* Re: [PATCH v7 3/4] gpiolib: Pass array info to get/set array functions
From: kbuild test robot @ 2018-09-04 15:23 UTC (permalink / raw)
Cc: Andrew Lunn, Ulf Hansson, linux-doc, linux-iio, Linus Walleij,
Dominik Brodowski, Peter Rosin, netdev, linux-i2c,
Peter Meerwald-Stadler, devel, Florian Fainelli, Jonathan Corbet,
Janusz Krzysztofik, Kishon Vijay Abraham I, Tony Lindgren,
Lukas Wunner, Geert Uytterhoeven, linux-serial, Jiri Slaby,
Michael Hennerich, Uwe Kleine-König, linux-gpio,
Russell King
In-Reply-To: <20180902120144.6855-4-jmkrzyszt@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 27248 bytes --]
Hi Janusz,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on gpio/for-next]
[also build test WARNING on v4.19-rc2 next-20180831]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Janusz-Krzysztofik/gpiolib-Pass-bitmaps-not-integer-arrays-to-get-set-array/20180903-172834
base: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git for-next
reproduce: make htmldocs
:::::: branch date: 8 hours ago
:::::: commit date: 8 hours ago
All warnings (new ones prefixed by >>):
WARNING: convert(1) not found, for SVG to PDF conversion install ImageMagick (https://www.imagemagick.org)
include/linux/srcu.h:175: warning: Function parameter or member 'p' not described in 'srcu_dereference_notrace'
include/linux/srcu.h:175: warning: Function parameter or member 'sp' not described in 'srcu_dereference_notrace'
include/linux/gfp.h:1: warning: no structured comments found
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.ibss' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.connect' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.keys' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.ie' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.ie_len' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.bssid' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.ssid' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.default_key' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.default_mgmt_key' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.prev_bssid_valid' not described in 'wireless_dev'
include/net/mac80211.h:2328: warning: Function parameter or member 'radiotap_timestamp.units_pos' not described in 'ieee80211_hw'
include/net/mac80211.h:2328: warning: Function parameter or member 'radiotap_timestamp.accuracy' not described in 'ieee80211_hw'
include/net/mac80211.h:977: warning: Function parameter or member 'control.rates' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.rts_cts_rate_idx' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.use_rts' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.use_cts_prot' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.short_preamble' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.skip_table' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.jiffies' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.vif' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.hw_key' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.flags' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.enqueue_time' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'ack' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'ack.cookie' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.rates' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.ack_signal' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.ampdu_ack_len' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.ampdu_len' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.antenna' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.tx_time' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.is_valid_ack_signal' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.status_driver_data' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'driver_rates' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'pad' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'rate_driver_data' not described in 'ieee80211_tx_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'rx_stats_avg' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'rx_stats_avg.signal' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'rx_stats_avg.chain_signal' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.filtered' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.retry_failed' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.retry_count' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.lost_packets' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.last_tdls_pkt_time' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.msdu_retries' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.msdu_failed' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.last_ack' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.last_ack_signal' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.ack_signal_filled' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.avg_ack_signal' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'tx_stats.packets' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'tx_stats.bytes' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'tx_stats.last_rate' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'tx_stats.msdu' not described in 'sta_info'
include/linux/mod_devicetable.h:763: warning: Function parameter or member 'driver_data' not described in 'typec_device_id'
kernel/sched/fair.c:3371: warning: Function parameter or member 'flags' not described in 'attach_entity_load_avg'
arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'i' description in 'arch_atomic_sub_and_test'
arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'v' description in 'arch_atomic_sub_and_test'
arch/x86/include/asm/atomic.h:96: warning: Excess function parameter 'v' description in 'arch_atomic_inc'
arch/x86/include/asm/atomic.h:109: warning: Excess function parameter 'v' description in 'arch_atomic_dec'
arch/x86/include/asm/atomic.h:124: warning: Excess function parameter 'v' description in 'arch_atomic_dec_and_test'
arch/x86/include/asm/atomic.h:138: warning: Excess function parameter 'v' description in 'arch_atomic_inc_and_test'
arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'i' description in 'arch_atomic_add_negative'
arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'v' description in 'arch_atomic_add_negative'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.cb' not described in 'dma_buf'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.poll' not described in 'dma_buf'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.active' not described in 'dma_buf'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.cb' not described in 'dma_buf'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.poll' not described in 'dma_buf'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.active' not described in 'dma_buf'
include/linux/dma-fence-array.h:54: warning: Function parameter or member 'work' not described in 'dma_fence_array'
include/linux/gpio/driver.h:142: warning: Function parameter or member 'request_key' not described in 'gpio_irq_chip'
>> drivers/gpio/gpiolib.c:2917: warning: Function parameter or member 'array_info' not described in 'gpiod_get_raw_array_value'
>> drivers/gpio/gpiolib.c:2942: warning: Function parameter or member 'array_info' not described in 'gpiod_get_array_value'
drivers/gpio/gpiolib.c:2942: warning: Function parameter or member 'value_bitmap' not described in 'gpiod_get_array_value'
drivers/gpio/gpiolib.c:2942: warning: Excess function parameter 'value_bitnap' description in 'gpiod_get_array_value'
>> drivers/gpio/gpiolib.c:3180: warning: Function parameter or member 'array_info' not described in 'gpiod_set_raw_array_value'
>> drivers/gpio/gpiolib.c:3204: warning: Function parameter or member 'array_info' not described in 'gpiod_set_array_value'
>> drivers/gpio/gpiolib.c:3442: warning: Function parameter or member 'array_info' not described in 'gpiod_get_raw_array_value_cansleep'
>> drivers/gpio/gpiolib.c:3467: warning: Function parameter or member 'array_info' not described in 'gpiod_get_array_value_cansleep'
>> drivers/gpio/gpiolib.c:3528: warning: Function parameter or member 'array_info' not described in 'gpiod_set_raw_array_value_cansleep'
>> drivers/gpio/gpiolib.c:3569: warning: Function parameter or member 'array_info' not described in 'gpiod_set_array_value_cansleep'
include/linux/iio/hw-consumer.h:1: warning: no structured comments found
include/linux/input/sparse-keymap.h:46: warning: Function parameter or member 'sw' not described in 'key_entry'
drivers/pci/pci.c:218: warning: Excess function parameter 'p' description in 'pci_dev_str_match_path'
include/linux/regulator/driver.h:227: warning: Function parameter or member 'resume' not described in 'regulator_ops'
drivers/regulator/core.c:4479: warning: Excess function parameter 'state' description in 'regulator_suspend'
arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw0' not described in 'irb'
arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw1' not described in 'irb'
arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw2' not described in 'irb'
arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw3' not described in 'irb'
arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.eadm' not described in 'irb'
drivers/slimbus/stream.c:1: warning: no structured comments found
drivers/target/target_core_device.c:1: warning: no structured comments found
drivers/usb/dwc3/gadget.c:510: warning: Excess function parameter 'dwc' description in 'dwc3_gadget_start_config'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/bus.c:1: warning: no structured comments found
drivers/usb/typec/bus.c:268: warning: Function parameter or member 'mode' not described in 'typec_match_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1: warning: no structured comments found
include/linux/w1.h:281: warning: Function parameter or member 'of_match_table' not described in 'w1_family'
fs/direct-io.c:257: warning: Excess function parameter 'offset' description in 'dio_complete'
fs/file_table.c:1: warning: no structured comments found
fs/libfs.c:477: warning: Excess function parameter 'available' description in 'simple_write_end'
fs/posix_acl.c:646: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
fs/posix_acl.c:646: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
fs/posix_acl.c:646: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'
drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:183: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_read_lock'
drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:254: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_invalidate_range_start_gfx'
drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:302: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_invalidate_range_start_hsa'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:2986: warning: Excess function parameter 'dev' description in 'amdgpu_vm_get_task_info'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:2987: warning: Function parameter or member 'adev' not described in 'amdgpu_vm_get_task_info'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:2987: warning: Excess function parameter 'dev' description in 'amdgpu_vm_get_task_info'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_pin' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_unpin' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_res_obj' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_get_sg_table' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_import_sg_table' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_vmap' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_vunmap' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_mmap' not described in 'drm_driver'
include/drm/drm_panel.h:98: warning: Function parameter or member 'link' not described in 'drm_panel'
drivers/gpu/drm/i915/i915_vma.h:49: warning: cannot understand function prototype: 'struct i915_vma '
drivers/gpu/drm/i915/i915_vma.h:1: warning: no structured comments found
drivers/gpu/drm/i915/intel_guc_fwif.h:553: warning: cannot understand function prototype: 'struct guc_log_buffer_state '
drivers/gpu/drm/i915/i915_trace.h:1: warning: no structured comments found
include/linux/skbuff.h:860: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'list' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'skb_mstamp' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'offload_fwd_mark' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'offload_mr_fwd_mark' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
include/net/sock.h:238: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_net_refcnt' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_v6_daddr' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_v6_rcv_saddr' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_cookie' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_listener' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_tw_dr' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_rcv_wnd' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_tw_rcv_nxt' not described in 'sock_common'
include/net/sock.h:509: warning: Function parameter or member 'sk_backlog.rmem_alloc' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_backlog.len' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_backlog.head' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_backlog.tail' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_wq_raw' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'tcp_rtx_queue' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_route_forced_caps' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_txtime_report_errors' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_validate_xmit_skb' not described in 'sock'
include/linux/netdevice.h:2018: warning: Function parameter or member 'adj_list.upper' not described in 'net_device'
include/linux/netdevice.h:2018: warning: Function parameter or member 'adj_list.lower' not described in 'net_device'
include/linux/netdevice.h:2018: warning: Function parameter or member 'gso_partial_features' not described in 'net_device'
include/linux/netdevice.h:2018: warning: Function parameter or member 'switchdev_ops' not described in 'net_device'
include/linux/netdevice.h:2018: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device'
include/linux/netdevice.h:2018: warning: Function parameter or member 'xfrmdev_ops' not described in 'net_device'
# https://github.com/0day-ci/linux/commit/dea6937cb6f545e86b0d5bc4c7e31be802de175d
git remote add linux-review https://github.com/0day-ci/linux
git remote update linux-review
git checkout dea6937cb6f545e86b0d5bc4c7e31be802de175d
vim +2917 drivers/gpio/gpiolib.c
d2876d08 David Brownell 2008-02-04 2898
eec1d566 Lukas Wunner 2017-10-12 2899 /**
eec1d566 Lukas Wunner 2017-10-12 2900 * gpiod_get_raw_array_value() - read raw values from an array of GPIOs
916010a7 Janusz Krzysztofik 2018-09-02 2901 * @array_size: number of elements in the descriptor array / value bitmap
eec1d566 Lukas Wunner 2017-10-12 2902 * @desc_array: array of GPIO descriptors whose values will be read
916010a7 Janusz Krzysztofik 2018-09-02 2903 * @value_bitmap: bitmap to store the read values
eec1d566 Lukas Wunner 2017-10-12 2904 *
eec1d566 Lukas Wunner 2017-10-12 2905 * Read the raw values of the GPIOs, i.e. the values of the physical lines
eec1d566 Lukas Wunner 2017-10-12 2906 * without regard for their ACTIVE_LOW status. Return 0 in case of success,
eec1d566 Lukas Wunner 2017-10-12 2907 * else an error code.
eec1d566 Lukas Wunner 2017-10-12 2908 *
eec1d566 Lukas Wunner 2017-10-12 2909 * This function should be called from contexts where we cannot sleep,
eec1d566 Lukas Wunner 2017-10-12 2910 * and it will complain if the GPIO chip functions potentially sleep.
eec1d566 Lukas Wunner 2017-10-12 2911 */
eec1d566 Lukas Wunner 2017-10-12 2912 int gpiod_get_raw_array_value(unsigned int array_size,
916010a7 Janusz Krzysztofik 2018-09-02 2913 struct gpio_desc **desc_array,
dea6937c Janusz Krzysztofik 2018-09-02 2914 struct gpio_array *array_info,
916010a7 Janusz Krzysztofik 2018-09-02 2915 unsigned long *value_bitmap)
eec1d566 Lukas Wunner 2017-10-12 2916 {
eec1d566 Lukas Wunner 2017-10-12 @2917 if (!desc_array)
eec1d566 Lukas Wunner 2017-10-12 2918 return -EINVAL;
eec1d566 Lukas Wunner 2017-10-12 2919 return gpiod_get_array_value_complex(true, false, array_size,
dea6937c Janusz Krzysztofik 2018-09-02 2920 desc_array, array_info,
dea6937c Janusz Krzysztofik 2018-09-02 2921 value_bitmap);
eec1d566 Lukas Wunner 2017-10-12 2922 }
eec1d566 Lukas Wunner 2017-10-12 2923 EXPORT_SYMBOL_GPL(gpiod_get_raw_array_value);
eec1d566 Lukas Wunner 2017-10-12 2924
eec1d566 Lukas Wunner 2017-10-12 2925 /**
eec1d566 Lukas Wunner 2017-10-12 2926 * gpiod_get_array_value() - read values from an array of GPIOs
916010a7 Janusz Krzysztofik 2018-09-02 2927 * @array_size: number of elements in the descriptor array / value bitmap
eec1d566 Lukas Wunner 2017-10-12 2928 * @desc_array: array of GPIO descriptors whose values will be read
916010a7 Janusz Krzysztofik 2018-09-02 2929 * @value_bitnap: bitmap to store the read values
eec1d566 Lukas Wunner 2017-10-12 2930 *
eec1d566 Lukas Wunner 2017-10-12 2931 * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
eec1d566 Lukas Wunner 2017-10-12 2932 * into account. Return 0 in case of success, else an error code.
eec1d566 Lukas Wunner 2017-10-12 2933 *
eec1d566 Lukas Wunner 2017-10-12 2934 * This function should be called from contexts where we cannot sleep,
eec1d566 Lukas Wunner 2017-10-12 2935 * and it will complain if the GPIO chip functions potentially sleep.
eec1d566 Lukas Wunner 2017-10-12 2936 */
eec1d566 Lukas Wunner 2017-10-12 2937 int gpiod_get_array_value(unsigned int array_size,
916010a7 Janusz Krzysztofik 2018-09-02 2938 struct gpio_desc **desc_array,
dea6937c Janusz Krzysztofik 2018-09-02 2939 struct gpio_array *array_info,
916010a7 Janusz Krzysztofik 2018-09-02 2940 unsigned long *value_bitmap)
eec1d566 Lukas Wunner 2017-10-12 2941 {
eec1d566 Lukas Wunner 2017-10-12 @2942 if (!desc_array)
eec1d566 Lukas Wunner 2017-10-12 2943 return -EINVAL;
eec1d566 Lukas Wunner 2017-10-12 2944 return gpiod_get_array_value_complex(false, false, array_size,
dea6937c Janusz Krzysztofik 2018-09-02 2945 desc_array, array_info,
dea6937c Janusz Krzysztofik 2018-09-02 2946 value_bitmap);
eec1d566 Lukas Wunner 2017-10-12 2947 }
eec1d566 Lukas Wunner 2017-10-12 2948 EXPORT_SYMBOL_GPL(gpiod_get_array_value);
eec1d566 Lukas Wunner 2017-10-12 2949
:::::: The code at line 2917 was first introduced by commit
:::::: eec1d566cdf94b57e8f5ba9fe60eea214929bcfc gpio: Introduce ->get_multiple callback
:::::: TO: Lukas Wunner <lukas@wunner.de>
:::::: CC: Linus Walleij <linus.walleij@linaro.org>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 6587 bytes --]
[-- Attachment #3: Type: text/plain, Size: 169 bytes --]
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply
* Re: [PATCH v6 3/4] gpiolib: Pass array info to get/set array functions
From: kbuild test robot @ 2018-09-04 15:27 UTC (permalink / raw)
Cc: kbuild-all, Linus Walleij, Andrew Lunn, Ulf Hansson, linux-doc,
linux-iio, Dominik Brodowski, Peter Rosin, netdev, linux-i2c,
Peter Meerwald-Stadler, devel, Florian Fainelli, Jonathan Corbet,
Janusz Krzysztofik, Kishon Vijay Abraham I, Geert Uytterhoeven,
linux-serial, Jiri Slaby, Michael Hennerich, linux-gpio,
Lars-Peter Clausen
In-Reply-To: <20180831225616.29221-4-jmkrzyszt@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4096 bytes --]
Hi Janusz,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on gpio/for-next]
[also build test ERROR on v4.19-rc2 next-20180831]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Janusz-Krzysztofik/gpiolib-speed-up-GPIO-array-processing/20180903-174241
base: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git for-next
config: arm-cns3420vb_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.2.0 make.cross ARCH=arm
:::::: branch date: 6 hours ago
:::::: commit date: 6 hours ago
All errors (new ones prefixed by >>):
drivers/mmc/core/pwrseq_simple.c: In function 'mmc_pwrseq_simple_set_gpios_value':
drivers/mmc/core/pwrseq_simple.c:49:13: error: passing argument 3 of 'gpiod_set_array_value_cansleep' from incompatible pointer type [-Werror=incompatible-pointer-types]
reset_gpios->info, value_bitmap);
^~~~~~~~~~~
In file included from drivers/mmc/core/pwrseq_simple.c:18:0:
include/linux/gpio/consumer.h:417:20: note: expected 'int *' but argument is of type 'struct gpio_array *'
static inline void gpiod_set_array_value_cansleep(unsigned int array_size,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/mmc/core/pwrseq_simple.c:48:3: error: too many arguments to function 'gpiod_set_array_value_cansleep'
gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/mmc/core/pwrseq_simple.c:18:0:
include/linux/gpio/consumer.h:417:20: note: declared here
static inline void gpiod_set_array_value_cansleep(unsigned int array_size,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
# https://github.com/0day-ci/linux/commit/2313edb413de154774fb6a3431f5f135f9c78180
git remote add linux-review https://github.com/0day-ci/linux
git remote update linux-review
git checkout 2313edb413de154774fb6a3431f5f135f9c78180
vim +/gpiod_set_array_value_cansleep +48 drivers/mmc/core/pwrseq_simple.c
5b96fea73 Srinivas Kandagatla 2016-04-14 36
934f1f483 Javier Martinez Canillas 2015-01-29 37 static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
934f1f483 Javier Martinez Canillas 2015-01-29 38 int value)
934f1f483 Javier Martinez Canillas 2015-01-29 39 {
ce0372758 Javier Martinez Canillas 2015-09-21 40 struct gpio_descs *reset_gpios = pwrseq->reset_gpios;
64a67d476 Martin Fuzzey 2016-01-20 41
64a67d476 Martin Fuzzey 2016-01-20 42 if (!IS_ERR(reset_gpios)) {
486e66613 Tobin C. Harding 2018-03-26 43 int nvalues = reset_gpios->ndescs;
00db98568 Janusz Krzysztofik 2018-09-01 44 DECLARE_BITMAP(value_bitmap, nvalues);
934f1f483 Javier Martinez Canillas 2015-01-29 45
00db98568 Janusz Krzysztofik 2018-09-01 46 *value_bitmap = value;
486e66613 Tobin C. Harding 2018-03-26 47
00db98568 Janusz Krzysztofik 2018-09-01 @48 gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc,
2313edb41 Janusz Krzysztofik 2018-09-01 @49 reset_gpios->info, value_bitmap);
64a67d476 Martin Fuzzey 2016-01-20 50 }
934f1f483 Javier Martinez Canillas 2015-01-29 51 }
934f1f483 Javier Martinez Canillas 2015-01-29 52
:::::: The code at line 48 was first introduced by commit
:::::: 00db98568b73a7b04c5120e5b87934c7355cc015 gpiolib: Pass bitmaps, not integer arrays, to get/set array
:::::: TO: Janusz Krzysztofik <jmkrzyszt@gmail.com>
:::::: CC: 0day robot <lkp@intel.com>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 9623 bytes --]
^ permalink raw reply
* Re: [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
From: kbuild test robot @ 2018-09-04 15:28 UTC (permalink / raw)
To: Janusz Krzysztofik
Cc: kbuild-all, Linus Walleij, Jonathan Corbet, Miguel Ojeda Sandonis,
Peter Korsgaard, Peter Rosin, Ulf Hansson, Andrew Lunn,
Florian Fainelli, David S. Miller, Dominik Brodowski,
Greg Kroah-Hartman, Kishon Vijay Abraham I, Lars-Peter Clausen,
Michael Hennerich, Jonathan Cameron, Hartmut Knaack,
Peter Meerwald-Stadler, Jiri Slaby, Willy
In-Reply-To: <20180831225616.29221-2-jmkrzyszt@gmail.com>
Hi Janusz,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on gpio/for-next]
[also build test WARNING on v4.19-rc2 next-20180831]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Janusz-Krzysztofik/gpiolib-speed-up-GPIO-array-processing/20180903-174241
base: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git for-next
reproduce:
# apt-get install sparse
make ARCH=x86_64 allmodconfig
make C=1 CF=-D__CHECK_ENDIAN__
:::::: branch date: 9 hours ago
:::::: commit date: 9 hours ago
>> drivers/mux/gpio.c:25:9: sparse: Variable length array is used.
--
>> drivers/i2c/muxes/i2c-mux-gpio.c:29:9: sparse: Variable length array is used.
include/linux/device.h:685:13: sparse: undefined identifier '__builtin_mul_overflow'
include/linux/device.h:685:13: sparse: not a function <noident>
include/linux/device.h:685:13: sparse: call with no type!
# https://github.com/0day-ci/linux/commit/00db98568b73a7b04c5120e5b87934c7355cc015
git remote add linux-review https://github.com/0day-ci/linux
git remote update linux-review
git checkout 00db98568b73a7b04c5120e5b87934c7355cc015
vim +25 drivers/mux/gpio.c
2c089f08e drivers/mux/mux-gpio.c Peter Rosin 2017-05-14 21
2c089f08e drivers/mux/mux-gpio.c Peter Rosin 2017-05-14 22 static int mux_gpio_set(struct mux_control *mux, int state)
2c089f08e drivers/mux/mux-gpio.c Peter Rosin 2017-05-14 23 {
2c089f08e drivers/mux/mux-gpio.c Peter Rosin 2017-05-14 24 struct mux_gpio *mux_gpio = mux_chip_priv(mux->chip);
00db98568 drivers/mux/gpio.c Janusz Krzysztofik 2018-09-01 @25 DECLARE_BITMAP(value_bitmap, mux_gpio->gpios->ndescs);
2c089f08e drivers/mux/mux-gpio.c Peter Rosin 2017-05-14 26
00db98568 drivers/mux/gpio.c Janusz Krzysztofik 2018-09-01 27 *value_bitmap = state;
2c089f08e drivers/mux/mux-gpio.c Peter Rosin 2017-05-14 28
2c089f08e drivers/mux/mux-gpio.c Peter Rosin 2017-05-14 29 gpiod_set_array_value_cansleep(mux_gpio->gpios->ndescs,
00db98568 drivers/mux/gpio.c Janusz Krzysztofik 2018-09-01 30 mux_gpio->gpios->desc, value_bitmap);
2c089f08e drivers/mux/mux-gpio.c Peter Rosin 2017-05-14 31
2c089f08e drivers/mux/mux-gpio.c Peter Rosin 2017-05-14 32 return 0;
2c089f08e drivers/mux/mux-gpio.c Peter Rosin 2017-05-14 33 }
2c089f08e drivers/mux/mux-gpio.c Peter Rosin 2017-05-14 34
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
^ permalink raw reply
* Re: [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
From: kbuild test robot @ 2018-09-04 15:28 UTC (permalink / raw)
Cc: Andrew Lunn, Ulf Hansson, linux-doc, linux-iio, Linus Walleij,
Dominik Brodowski, Peter Rosin, netdev, linux-i2c,
Peter Meerwald-Stadler, devel, Florian Fainelli, Jonathan Corbet,
Janusz Krzysztofik, Kishon Vijay Abraham I, Geert Uytterhoeven,
linux-serial, Jiri Slaby, Michael Hennerich, linux-gpio,
Lars-Peter Clausen, Greg Kroah-Hartman, linux-mmc, linux-kernel,
Willy Tarreau, Miguel
In-Reply-To: <20180831225616.29221-2-jmkrzyszt@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3328 bytes --]
Hi Janusz,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on gpio/for-next]
[also build test ERROR on v4.19-rc2 next-20180831]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Janusz-Krzysztofik/gpiolib-speed-up-GPIO-array-processing/20180903-174241
base: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git for-next
config: arm-cns3420vb_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.2.0 make.cross ARCH=arm
:::::: branch date: 5 hours ago
:::::: commit date: 5 hours ago
All errors (new ones prefixed by >>):
drivers/mmc/core/pwrseq_simple.c: In function 'mmc_pwrseq_simple_set_gpios_value':
>> drivers/mmc/core/pwrseq_simple.c:49:13: error: passing argument 3 of 'gpiod_set_array_value_cansleep' from incompatible pointer type [-Werror=incompatible-pointer-types]
value_bitmap);
^~~~~~~~~~~~
In file included from drivers/mmc/core/pwrseq_simple.c:18:0:
include/linux/gpio/consumer.h:400:20: note: expected 'int *' but argument is of type 'long unsigned int *'
static inline void gpiod_set_array_value_cansleep(unsigned int array_size,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
# https://github.com/0day-ci/linux/commit/00db98568b73a7b04c5120e5b87934c7355cc015
git remote add linux-review https://github.com/0day-ci/linux
git remote update linux-review
git checkout 00db98568b73a7b04c5120e5b87934c7355cc015
vim +/gpiod_set_array_value_cansleep +49 drivers/mmc/core/pwrseq_simple.c
5b96fea73 Srinivas Kandagatla 2016-04-14 36
934f1f483 Javier Martinez Canillas 2015-01-29 37 static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
934f1f483 Javier Martinez Canillas 2015-01-29 38 int value)
934f1f483 Javier Martinez Canillas 2015-01-29 39 {
ce0372758 Javier Martinez Canillas 2015-09-21 40 struct gpio_descs *reset_gpios = pwrseq->reset_gpios;
64a67d476 Martin Fuzzey 2016-01-20 41
64a67d476 Martin Fuzzey 2016-01-20 42 if (!IS_ERR(reset_gpios)) {
486e66613 Tobin C. Harding 2018-03-26 43 int nvalues = reset_gpios->ndescs;
00db98568 Janusz Krzysztofik 2018-09-01 44 DECLARE_BITMAP(value_bitmap, nvalues);
934f1f483 Javier Martinez Canillas 2015-01-29 45
00db98568 Janusz Krzysztofik 2018-09-01 46 *value_bitmap = value;
486e66613 Tobin C. Harding 2018-03-26 47
00db98568 Janusz Krzysztofik 2018-09-01 48 gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc,
00db98568 Janusz Krzysztofik 2018-09-01 @49 value_bitmap);
64a67d476 Martin Fuzzey 2016-01-20 50 }
934f1f483 Javier Martinez Canillas 2015-01-29 51 }
934f1f483 Javier Martinez Canillas 2015-01-29 52
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 9623 bytes --]
[-- Attachment #3: Type: text/plain, Size: 169 bytes --]
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply
* Re: [PATCH v7 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array
From: kbuild test robot @ 2018-09-04 15:29 UTC (permalink / raw)
To: Janusz Krzysztofik
Cc: kbuild-all, Linus Walleij, Jonathan Corbet, Miguel Ojeda Sandonis,
Peter Korsgaard, Peter Rosin, Ulf Hansson, Andrew Lunn,
Florian Fainelli, David S. Miller, Dominik Brodowski,
Greg Kroah-Hartman, Kishon Vijay Abraham I, Lars-Peter Clausen,
Michael Hennerich, Jonathan Cameron, Hartmut Knaack,
Peter Meerwald-Stadler, Jiri Slaby, Willy
In-Reply-To: <20180902120144.6855-2-jmkrzyszt@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 23765 bytes --]
Hi Janusz,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on gpio/for-next]
[also build test WARNING on v4.19-rc2 next-20180831]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Janusz-Krzysztofik/gpiolib-Pass-bitmaps-not-integer-arrays-to-get-set-array/20180903-172834
base: https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git for-next
reproduce: make htmldocs
:::::: branch date: 5 hours ago
:::::: commit date: 5 hours ago
All warnings (new ones prefixed by >>):
WARNING: convert(1) not found, for SVG to PDF conversion install ImageMagick (https://www.imagemagick.org)
include/linux/srcu.h:175: warning: Function parameter or member 'p' not described in 'srcu_dereference_notrace'
include/linux/srcu.h:175: warning: Function parameter or member 'sp' not described in 'srcu_dereference_notrace'
include/linux/gfp.h:1: warning: no structured comments found
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.ibss' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.connect' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.keys' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.ie' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.ie_len' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.bssid' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.ssid' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.default_key' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.default_mgmt_key' not described in 'wireless_dev'
include/net/cfg80211.h:4381: warning: Function parameter or member 'wext.prev_bssid_valid' not described in 'wireless_dev'
include/net/mac80211.h:2328: warning: Function parameter or member 'radiotap_timestamp.units_pos' not described in 'ieee80211_hw'
include/net/mac80211.h:2328: warning: Function parameter or member 'radiotap_timestamp.accuracy' not described in 'ieee80211_hw'
include/net/mac80211.h:977: warning: Function parameter or member 'control.rates' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.rts_cts_rate_idx' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.use_rts' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.use_cts_prot' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.short_preamble' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.skip_table' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.jiffies' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.vif' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.hw_key' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.flags' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'control.enqueue_time' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'ack' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'ack.cookie' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.rates' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.ack_signal' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.ampdu_ack_len' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.ampdu_len' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.antenna' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.tx_time' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.is_valid_ack_signal' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'status.status_driver_data' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'driver_rates' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'pad' not described in 'ieee80211_tx_info'
include/net/mac80211.h:977: warning: Function parameter or member 'rate_driver_data' not described in 'ieee80211_tx_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'rx_stats_avg' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'rx_stats_avg.signal' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'rx_stats_avg.chain_signal' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.filtered' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.retry_failed' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.retry_count' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.lost_packets' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.last_tdls_pkt_time' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.msdu_retries' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.msdu_failed' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.last_ack' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.last_ack_signal' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.ack_signal_filled' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'status_stats.avg_ack_signal' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'tx_stats.packets' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'tx_stats.bytes' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'tx_stats.last_rate' not described in 'sta_info'
net/mac80211/sta_info.h:588: warning: Function parameter or member 'tx_stats.msdu' not described in 'sta_info'
include/linux/mod_devicetable.h:763: warning: Function parameter or member 'driver_data' not described in 'typec_device_id'
kernel/sched/fair.c:3371: warning: Function parameter or member 'flags' not described in 'attach_entity_load_avg'
arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'i' description in 'arch_atomic_sub_and_test'
arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'v' description in 'arch_atomic_sub_and_test'
arch/x86/include/asm/atomic.h:96: warning: Excess function parameter 'v' description in 'arch_atomic_inc'
arch/x86/include/asm/atomic.h:109: warning: Excess function parameter 'v' description in 'arch_atomic_dec'
arch/x86/include/asm/atomic.h:124: warning: Excess function parameter 'v' description in 'arch_atomic_dec_and_test'
arch/x86/include/asm/atomic.h:138: warning: Excess function parameter 'v' description in 'arch_atomic_inc_and_test'
arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'i' description in 'arch_atomic_add_negative'
arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'v' description in 'arch_atomic_add_negative'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.cb' not described in 'dma_buf'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.poll' not described in 'dma_buf'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.active' not described in 'dma_buf'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.cb' not described in 'dma_buf'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.poll' not described in 'dma_buf'
include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.active' not described in 'dma_buf'
include/linux/dma-fence-array.h:54: warning: Function parameter or member 'work' not described in 'dma_fence_array'
include/linux/gpio/driver.h:142: warning: Function parameter or member 'request_key' not described in 'gpio_irq_chip'
>> drivers/gpio/gpiolib.c:2936: warning: Function parameter or member 'value_bitmap' not described in 'gpiod_get_array_value'
drivers/gpio/gpiolib.c:2936: warning: Excess function parameter 'value_bitnap' description in 'gpiod_get_array_value'
include/linux/iio/hw-consumer.h:1: warning: no structured comments found
include/linux/input/sparse-keymap.h:46: warning: Function parameter or member 'sw' not described in 'key_entry'
drivers/pci/pci.c:218: warning: Excess function parameter 'p' description in 'pci_dev_str_match_path'
include/linux/regulator/driver.h:227: warning: Function parameter or member 'resume' not described in 'regulator_ops'
drivers/regulator/core.c:4479: warning: Excess function parameter 'state' description in 'regulator_suspend'
arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw0' not described in 'irb'
arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw1' not described in 'irb'
arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw2' not described in 'irb'
arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw3' not described in 'irb'
arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.eadm' not described in 'irb'
drivers/slimbus/stream.c:1: warning: no structured comments found
drivers/target/target_core_device.c:1: warning: no structured comments found
drivers/usb/dwc3/gadget.c:510: warning: Excess function parameter 'dwc' description in 'dwc3_gadget_start_config'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/bus.c:1: warning: no structured comments found
drivers/usb/typec/bus.c:268: warning: Function parameter or member 'mode' not described in 'typec_match_altmode'
drivers/usb/typec/class.c:1497: warning: Excess function parameter 'drvdata' description in 'typec_port_register_altmode'
drivers/usb/typec/class.c:1: warning: no structured comments found
include/linux/w1.h:281: warning: Function parameter or member 'of_match_table' not described in 'w1_family'
fs/direct-io.c:257: warning: Excess function parameter 'offset' description in 'dio_complete'
fs/file_table.c:1: warning: no structured comments found
fs/libfs.c:477: warning: Excess function parameter 'available' description in 'simple_write_end'
fs/posix_acl.c:646: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
fs/posix_acl.c:646: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
fs/posix_acl.c:646: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'
drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:183: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_read_lock'
drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:254: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_invalidate_range_start_gfx'
drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:302: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_invalidate_range_start_hsa'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:2986: warning: Excess function parameter 'dev' description in 'amdgpu_vm_get_task_info'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:2987: warning: Function parameter or member 'adev' not described in 'amdgpu_vm_get_task_info'
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:2987: warning: Excess function parameter 'dev' description in 'amdgpu_vm_get_task_info'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_pin' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_unpin' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_res_obj' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_get_sg_table' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_import_sg_table' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_vmap' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_vunmap' not described in 'drm_driver'
include/drm/drm_drv.h:610: warning: Function parameter or member 'gem_prime_mmap' not described in 'drm_driver'
include/drm/drm_panel.h:98: warning: Function parameter or member 'link' not described in 'drm_panel'
drivers/gpu/drm/i915/i915_vma.h:49: warning: cannot understand function prototype: 'struct i915_vma '
drivers/gpu/drm/i915/i915_vma.h:1: warning: no structured comments found
drivers/gpu/drm/i915/intel_guc_fwif.h:553: warning: cannot understand function prototype: 'struct guc_log_buffer_state '
drivers/gpu/drm/i915/i915_trace.h:1: warning: no structured comments found
include/linux/skbuff.h:860: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'list' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'skb_mstamp' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'offload_fwd_mark' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'offload_mr_fwd_mark' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
include/linux/skbuff.h:860: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
include/net/sock.h:238: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_net_refcnt' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_v6_daddr' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_v6_rcv_saddr' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_cookie' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_listener' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_tw_dr' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_rcv_wnd' not described in 'sock_common'
include/net/sock.h:238: warning: Function parameter or member 'skc_tw_rcv_nxt' not described in 'sock_common'
include/net/sock.h:509: warning: Function parameter or member 'sk_backlog.rmem_alloc' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_backlog.len' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_backlog.head' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_backlog.tail' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_wq_raw' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'tcp_rtx_queue' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_route_forced_caps' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_txtime_report_errors' not described in 'sock'
include/net/sock.h:509: warning: Function parameter or member 'sk_validate_xmit_skb' not described in 'sock'
include/linux/netdevice.h:2018: warning: Function parameter or member 'adj_list.upper' not described in 'net_device'
include/linux/netdevice.h:2018: warning: Function parameter or member 'adj_list.lower' not described in 'net_device'
include/linux/netdevice.h:2018: warning: Function parameter or member 'gso_partial_features' not described in 'net_device'
include/linux/netdevice.h:2018: warning: Function parameter or member 'switchdev_ops' not described in 'net_device'
include/linux/netdevice.h:2018: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device'
# https://github.com/0day-ci/linux/commit/916010a7343fd0931103acedebff6835ed3314f0
git remote add linux-review https://github.com/0day-ci/linux
git remote update linux-review
git checkout 916010a7343fd0931103acedebff6835ed3314f0
vim +2936 drivers/gpio/gpiolib.c
eec1d566 Lukas Wunner 2017-10-12 2919
eec1d566 Lukas Wunner 2017-10-12 2920 /**
eec1d566 Lukas Wunner 2017-10-12 2921 * gpiod_get_array_value() - read values from an array of GPIOs
916010a7 Janusz Krzysztofik 2018-09-02 2922 * @array_size: number of elements in the descriptor array / value bitmap
eec1d566 Lukas Wunner 2017-10-12 2923 * @desc_array: array of GPIO descriptors whose values will be read
916010a7 Janusz Krzysztofik 2018-09-02 2924 * @value_bitnap: bitmap to store the read values
eec1d566 Lukas Wunner 2017-10-12 2925 *
eec1d566 Lukas Wunner 2017-10-12 2926 * Read the logical values of the GPIOs, i.e. taking their ACTIVE_LOW status
eec1d566 Lukas Wunner 2017-10-12 2927 * into account. Return 0 in case of success, else an error code.
eec1d566 Lukas Wunner 2017-10-12 2928 *
eec1d566 Lukas Wunner 2017-10-12 2929 * This function should be called from contexts where we cannot sleep,
eec1d566 Lukas Wunner 2017-10-12 2930 * and it will complain if the GPIO chip functions potentially sleep.
eec1d566 Lukas Wunner 2017-10-12 2931 */
eec1d566 Lukas Wunner 2017-10-12 2932 int gpiod_get_array_value(unsigned int array_size,
916010a7 Janusz Krzysztofik 2018-09-02 2933 struct gpio_desc **desc_array,
916010a7 Janusz Krzysztofik 2018-09-02 2934 unsigned long *value_bitmap)
eec1d566 Lukas Wunner 2017-10-12 2935 {
eec1d566 Lukas Wunner 2017-10-12 @2936 if (!desc_array)
eec1d566 Lukas Wunner 2017-10-12 2937 return -EINVAL;
eec1d566 Lukas Wunner 2017-10-12 2938 return gpiod_get_array_value_complex(false, false, array_size,
916010a7 Janusz Krzysztofik 2018-09-02 2939 desc_array, value_bitmap);
eec1d566 Lukas Wunner 2017-10-12 2940 }
eec1d566 Lukas Wunner 2017-10-12 2941 EXPORT_SYMBOL_GPL(gpiod_get_array_value);
eec1d566 Lukas Wunner 2017-10-12 2942
:::::: The code at line 2936 was first introduced by commit
:::::: eec1d566cdf94b57e8f5ba9fe60eea214929bcfc gpio: Introduce ->get_multiple callback
:::::: TO: Lukas Wunner <lukas@wunner.de>
:::::: CC: Linus Walleij <linus.walleij@linaro.org>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 6587 bytes --]
^ permalink raw reply
* Re: [PATCH 1/2] tty: serial: imx: add lock for registers save/restore
From: Uwe Kleine-König @ 2018-09-04 20:32 UTC (permalink / raw)
To: Anson Huang; +Cc: gregkh, jslaby, linux-serial, linux-kernel, Linux-imx
In-Reply-To: <1533809169-24133-1-git-send-email-Anson.Huang@nxp.com>
Hello,
On Thu, Aug 09, 2018 at 06:06:08PM +0800, Anson Huang wrote:
> In noirq suspend/resume stage with no_console_suspend enabled,
> .imx_console_write() may be called to print out log_buf
> message by .printk(), so there will be race condition between
> .imx_console_write() and .serial_imx_save/restore_context(),
> need to add lock to protect the registers save/restore operations.
The function names changes some time ago. Also I'd drop the leading dots
in the names which I would understand as members in a struct.
Is this a theoretical issue, or did you see actual breakage?
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> drivers/tty/serial/imx.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 239c0fa..a09ccef 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -2376,9 +2376,12 @@ static int imx_uart_remove(struct platform_device *pdev)
>
> static void imx_uart_restore_context(struct imx_port *sport)
> {
> + unsigned long flags;
> +
> if (!sport->context_saved)
> return;
Is it safe to check .context_saved without holding the lock?
> + spin_lock_irqsave(&sport->port.lock, flags);
> imx_uart_writel(sport, sport->saved_reg[4], UFCR);
> imx_uart_writel(sport, sport->saved_reg[5], UESC);
> imx_uart_writel(sport, sport->saved_reg[6], UTIM);
> @@ -2390,11 +2393,15 @@ static void imx_uart_restore_context(struct imx_port *sport)
> imx_uart_writel(sport, sport->saved_reg[2], UCR3);
> imx_uart_writel(sport, sport->saved_reg[3], UCR4);
> sport->context_saved = false;
> + spin_unlock_irqrestore(&sport->port.lock, flags);
> }
>
> static void imx_uart_save_context(struct imx_port *sport)
> {
> + unsigned long flags;
> +
> /* Save necessary regs */
> + spin_lock_irqsave(&sport->port.lock, flags);
> sport->saved_reg[0] = imx_uart_readl(sport, UCR1);
> sport->saved_reg[1] = imx_uart_readl(sport, UCR2);
> sport->saved_reg[2] = imx_uart_readl(sport, UCR3);
> @@ -2406,6 +2413,7 @@ static void imx_uart_save_context(struct imx_port *sport)
> sport->saved_reg[8] = imx_uart_readl(sport, UBMR);
> sport->saved_reg[9] = imx_uart_readl(sport, IMX21_UTS);
> sport->context_saved = true;
> + spin_unlock_irqrestore(&sport->port.lock, flags);
> }
>
> static void imx_uart_enable_wakeup(struct imx_port *sport, bool on)
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply
* Re: [PATCH 2/2] tty: serial: imx: add pinctrl sleep/default mode switch for suspend
From: Uwe Kleine-König @ 2018-09-04 20:33 UTC (permalink / raw)
To: Anson Huang; +Cc: gregkh, jslaby, linux-serial, linux-kernel, Linux-imx
In-Reply-To: <1533809169-24133-2-git-send-email-Anson.Huang@nxp.com>
On Thu, Aug 09, 2018 at 06:06:09PM +0800, Anson Huang wrote:
> On some i.MX SoCs' low power mode, UART iomux settings
Would be nice to point out specific affected SoCs.
> may be lost, need to add pinctrl sleep/default mode switch
> during suspend/resume to make sure UART iomux settings are
> correct after resume.
Otherwise the change looks fine.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply
* RE: [PATCH 1/2] tty: serial: imx: add lock for registers save/restore
From: Anson Huang @ 2018-09-05 1:20 UTC (permalink / raw)
To: Uwe Kleine-König
Cc: gregkh@linuxfoundation.org, jslaby@suse.com,
linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
dl-linux-imx
In-Reply-To: <20180904203205.yboqvzkkrm6g7go5@pengutronix.de>
Hi, Uwe
Anson Huang
Best Regards!
> -----Original Message-----
> From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> Sent: Wednesday, September 5, 2018 4:32 AM
> To: Anson Huang <anson.huang@nxp.com>
> Cc: gregkh@linuxfoundation.org; jslaby@suse.com;
> linux-serial@vger.kernel.org; linux-kernel@vger.kernel.org; dl-linux-imx
> <linux-imx@nxp.com>
> Subject: Re: [PATCH 1/2] tty: serial: imx: add lock for registers save/restore
>
> Hello,
>
> On Thu, Aug 09, 2018 at 06:06:08PM +0800, Anson Huang wrote:
> > In noirq suspend/resume stage with no_console_suspend enabled,
> > .imx_console_write() may be called to print out log_buf message by
> > .printk(), so there will be race condition between
> > .imx_console_write() and .serial_imx_save/restore_context(),
> > need to add lock to protect the registers save/restore operations.
>
> The function names changes some time ago. Also I'd drop the leading dots in
> the names which I would understand as members in a struct.
>
> Is this a theoretical issue, or did you see actual breakage?
I will update the function name and remove the dots.
And we did see actual breakage during stress test, although the reproduce rate
is NOT that high, but the issue came out and fixed by this patch.
>
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > drivers/tty/serial/imx.c | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index
> > 239c0fa..a09ccef 100644
> > --- a/drivers/tty/serial/imx.c
> > +++ b/drivers/tty/serial/imx.c
> > @@ -2376,9 +2376,12 @@ static int imx_uart_remove(struct
> > platform_device *pdev)
> >
> > static void imx_uart_restore_context(struct imx_port *sport) {
> > + unsigned long flags;
> > +
> > if (!sport->context_saved)
> > return;
>
> Is it safe to check .context_saved without holding the lock?
Ah, my mistake, will put the check inside the lock. Please help
review V2 patch set, thanks.
Anson.
>
> > + spin_lock_irqsave(&sport->port.lock, flags);
> > imx_uart_writel(sport, sport->saved_reg[4], UFCR);
> > imx_uart_writel(sport, sport->saved_reg[5], UESC);
> > imx_uart_writel(sport, sport->saved_reg[6], UTIM); @@ -2390,11
> > +2393,15 @@ static void imx_uart_restore_context(struct imx_port *sport)
> > imx_uart_writel(sport, sport->saved_reg[2], UCR3);
> > imx_uart_writel(sport, sport->saved_reg[3], UCR4);
> > sport->context_saved = false;
> > + spin_unlock_irqrestore(&sport->port.lock, flags);
> > }
> >
> > static void imx_uart_save_context(struct imx_port *sport) {
> > + unsigned long flags;
> > +
> > /* Save necessary regs */
> > + spin_lock_irqsave(&sport->port.lock, flags);
> > sport->saved_reg[0] = imx_uart_readl(sport, UCR1);
> > sport->saved_reg[1] = imx_uart_readl(sport, UCR2);
> > sport->saved_reg[2] = imx_uart_readl(sport, UCR3); @@ -2406,6
> > +2413,7 @@ static void imx_uart_save_context(struct imx_port *sport)
> > sport->saved_reg[8] = imx_uart_readl(sport, UBMR);
> > sport->saved_reg[9] = imx_uart_readl(sport, IMX21_UTS);
> > sport->context_saved = true;
> > + spin_unlock_irqrestore(&sport->port.lock, flags);
> > }
> >
> > static void imx_uart_enable_wakeup(struct imx_port *sport, bool on)
>
> Best regards
> Uwe
>
> --
> Pengutronix e.K. | Uwe Kleine-König
> |
> Industrial Linux Solutions |
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
> pengutronix.de%2F&data=02%7C01%7Canson.huang%40nxp.com%7C74
> a28e347934451a59bf08d612a57f8c%7C686ea1d3bc2b4c6fa92cd99c5c301635
> %7C0%7C0%7C636716899353510311&sdata=lByZDd%2BbQitjEf%2FaiN3
> e26El3ErT0fnmvaKCqckF7Qc%3D&reserved=0 |
^ permalink raw reply
* [PATCH V2 1/2] tty: serial: imx: add lock for registers save/restore
From: Anson Huang @ 2018-09-05 1:24 UTC (permalink / raw)
To: gregkh, jslaby, linux-serial, linux-kernel, u.kleine-koenig; +Cc: Linux-imx
In noirq suspend/resume stage with no_console_suspend enabled,
imx_uart_console_write() may be called to print out log_buf
message by printk(), so there will be race condition between
imx_uart_console_write() and imx_uart_save/restore_context(),
need to add lock to protect the registers save/restore operations.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
drivers/tty/serial/imx.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 239c0fa..c15332d 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2376,8 +2376,13 @@ static int imx_uart_remove(struct platform_device *pdev)
static void imx_uart_restore_context(struct imx_port *sport)
{
- if (!sport->context_saved)
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+ if (!sport->context_saved) {
+ spin_unlock_irqrestore(&sport->port.lock, flags);
return;
+ }
imx_uart_writel(sport, sport->saved_reg[4], UFCR);
imx_uart_writel(sport, sport->saved_reg[5], UESC);
@@ -2390,11 +2395,15 @@ static void imx_uart_restore_context(struct imx_port *sport)
imx_uart_writel(sport, sport->saved_reg[2], UCR3);
imx_uart_writel(sport, sport->saved_reg[3], UCR4);
sport->context_saved = false;
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
static void imx_uart_save_context(struct imx_port *sport)
{
+ unsigned long flags;
+
/* Save necessary regs */
+ spin_lock_irqsave(&sport->port.lock, flags);
sport->saved_reg[0] = imx_uart_readl(sport, UCR1);
sport->saved_reg[1] = imx_uart_readl(sport, UCR2);
sport->saved_reg[2] = imx_uart_readl(sport, UCR3);
@@ -2406,6 +2415,7 @@ static void imx_uart_save_context(struct imx_port *sport)
sport->saved_reg[8] = imx_uart_readl(sport, UBMR);
sport->saved_reg[9] = imx_uart_readl(sport, IMX21_UTS);
sport->context_saved = true;
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
static void imx_uart_enable_wakeup(struct imx_port *sport, bool on)
--
2.7.4
^ permalink raw reply related
* [PATCH V2 2/2] tty: serial: imx: add pinctrl sleep/default mode switch for suspend
From: Anson Huang @ 2018-09-05 1:24 UTC (permalink / raw)
To: gregkh, jslaby, linux-serial, linux-kernel, u.kleine-koenig; +Cc: Linux-imx
In-Reply-To: <1536110667-23530-1-git-send-email-Anson.Huang@nxp.com>
On some i.MX SoCs' low power mode, such as i.MX7D's LPSR(low power
state retention), UART iomux settings will be lost, need to add
pinctrl sleep/default mode switch during suspend/resume to make
sure UART iomux settings are correct after resume.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
drivers/tty/serial/imx.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index c15332d..6ccb5c4 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -24,6 +24,7 @@
#include <linux/serial.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/rational.h>
#include <linux/slab.h>
#include <linux/of.h>
@@ -2449,6 +2450,8 @@ static int imx_uart_suspend_noirq(struct device *dev)
clk_disable(sport->clk_ipg);
+ pinctrl_pm_select_sleep_state(dev);
+
return 0;
}
@@ -2457,6 +2460,8 @@ static int imx_uart_resume_noirq(struct device *dev)
struct imx_port *sport = dev_get_drvdata(dev);
int ret;
+ pinctrl_pm_select_default_state(dev);
+
ret = clk_enable(sport->clk_ipg);
if (ret)
return ret;
--
2.7.4
^ permalink raw reply related
* [PATCH v2] tty: Change tty_{port|standard}_install() return type to void
From: Jaejoong Kim @ 2018-09-05 2:50 UTC (permalink / raw)
To: Greg Kroah-Hartman, Jiri Slaby
Cc: Yisheng Xie, Nicolas Pitre, Ulf Hansson, Benjamin Herrenschmidt,
Heiko Carstens, Alexander Potapenko, Michael Ellerman,
open list:SPARC SERIAL DRIVERS, Thomas Meyer, Anton Ivanov,
open list:STAGING SUBSYSTEM, open list:S390, Arnd Bergmann,
Richard Weinberger, David Lin, open list:SERIAL DRIVERS,
Marcel Holtmann, Guenter Roeck, Adam Borowski, Kees Cook,
Mathias Nyman
Many drivers with tty use the tty_stand_install(). But, there is no
need to handle the error, since it always returns 0. So, change the
return type of tty_standard_install() and tty_port_install() to void
type and remove unnecessary exception handling where we use these
functions.
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
---
Changes in v2:
- Update commit title
- Squash other patches into one
https://lkml.org/lkml/2018/9/4/70
arch/um/drivers/line.c | 7 +------
drivers/isdn/capi/capi.c | 10 ++++------
drivers/isdn/i4l/isdn_tty.c | 3 ++-
drivers/misc/pti.c | 28 +++++++++++++---------------
drivers/mmc/core/sdio_uart.c | 11 ++++-------
drivers/s390/char/con3215.c | 3 ++-
drivers/s390/char/tty3270.c | 7 +------
drivers/staging/fwserial/fwserial.c | 22 ++++++++--------------
drivers/staging/gdm724x/gdm_tty.c | 11 +++--------
drivers/staging/greybus/uart.c | 10 ++--------
drivers/tty/hvc/hvc_console.c | 7 ++-----
drivers/tty/hvc/hvcs.c | 10 ++--------
drivers/tty/mips_ejtag_fdc.c | 4 +++-
drivers/tty/n_gsm.c | 9 +--------
drivers/tty/nozomi.c | 8 +++-----
drivers/tty/serial/kgdb_nmi.c | 11 +----------
drivers/tty/synclink.c | 3 ++-
drivers/tty/synclinkmp.c | 3 ++-
drivers/tty/tty_io.c | 10 ++++++----
drivers/tty/tty_port.c | 4 ++--
drivers/tty/vcc.c | 5 +----
drivers/tty/vt/vt.c | 5 +----
drivers/usb/class/cdc-acm.c | 10 +---------
drivers/usb/host/xhci-dbgtty.c | 3 ++-
drivers/usb/serial/usb-serial.c | 6 +-----
include/linux/tty.h | 4 ++--
net/bluetooth/rfcomm/tty.c | 7 +------
27 files changed, 73 insertions(+), 148 deletions(-)
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 8d80b27..47058cf 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -338,12 +338,7 @@ int line_open(struct tty_struct *tty, struct file *filp)
int line_install(struct tty_driver *driver, struct tty_struct *tty,
struct line *line)
{
- int ret;
-
- ret = tty_standard_install(driver, tty);
- if (ret)
- return ret;
-
+ tty_standard_install(driver, tty);
tty->driver_data = line;
return 0;
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index ef5560b..08daf3a 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -999,13 +999,11 @@ static int
capinc_tty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct capiminor *mp = capiminor_get(tty->index);
- int ret = tty_standard_install(driver, tty);
- if (ret == 0)
- tty->driver_data = mp;
- else
- capiminor_put(mp);
- return ret;
+ tty_standard_install(driver, tty);
+ tty->driver_data = mp;
+
+ return 0;
}
static void capinc_tty_cleanup(struct tty_struct *tty)
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index b730037..3d6b24e 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1481,8 +1481,9 @@ static int isdn_tty_install(struct tty_driver *driver, struct tty_struct *tty)
return -ENODEV;
tty->driver_data = info;
+ tty_port_install(&info->port, driver, tty);
- return tty_port_install(&info->port, driver, tty);
+ return 0;
}
/*
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index 41f2a9f..5c885a1 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -462,26 +462,24 @@ static int pti_tty_install(struct tty_driver *driver, struct tty_struct *tty)
{
int idx = tty->index;
struct pti_tty *pti_tty_data;
- int ret = tty_standard_install(driver, tty);
- if (ret == 0) {
- pti_tty_data = kmalloc(sizeof(struct pti_tty), GFP_KERNEL);
- if (pti_tty_data == NULL)
- return -ENOMEM;
+ tty_standard_install(driver, tty);
+ pti_tty_data = kmalloc(sizeof(struct pti_tty), GFP_KERNEL);
+ if (pti_tty_data == NULL)
+ return -ENOMEM;
- if (idx == PTITTY_MINOR_START)
- pti_tty_data->mc = pti_request_masterchannel(0, NULL);
- else
- pti_tty_data->mc = pti_request_masterchannel(2, NULL);
+ if (idx == PTITTY_MINOR_START)
+ pti_tty_data->mc = pti_request_masterchannel(0, NULL);
+ else
+ pti_tty_data->mc = pti_request_masterchannel(2, NULL);
- if (pti_tty_data->mc == NULL) {
- kfree(pti_tty_data);
- return -ENXIO;
- }
- tty->driver_data = pti_tty_data;
+ if (pti_tty_data->mc == NULL) {
+ kfree(pti_tty_data);
+ return -ENXIO;
}
+ tty->driver_data = pti_tty_data;
- return ret;
+ return 0;
}
/**
diff --git a/drivers/mmc/core/sdio_uart.c b/drivers/mmc/core/sdio_uart.c
index 25e1130..b727186 100644
--- a/drivers/mmc/core/sdio_uart.c
+++ b/drivers/mmc/core/sdio_uart.c
@@ -731,14 +731,11 @@ static int sdio_uart_install(struct tty_driver *driver, struct tty_struct *tty)
{
int idx = tty->index;
struct sdio_uart_port *port = sdio_uart_port_get(idx);
- int ret = tty_standard_install(driver, tty);
- if (ret == 0)
- /* This is the ref sdio_uart_port get provided */
- tty->driver_data = port;
- else
- sdio_uart_port_put(port);
- return ret;
+ tty_standard_install(driver, tty);
+ tty->driver_data = port;
+
+ return 0;
}
/**
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 8c9d412..6a9f6d9 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -965,8 +965,9 @@ static int tty3215_install(struct tty_driver *driver, struct tty_struct *tty)
return -ENODEV;
tty->driver_data = raw;
+ tty_port_install(&raw->port, driver, tty);
- return tty_port_install(&raw->port, driver, tty);
+ return 0;
}
/*
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index 5b8af27..2915f95 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -1017,12 +1017,7 @@ static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty)
raw3270_activate_view(&tp->view);
port_install:
- rc = tty_port_install(&tp->port, driver, tty);
- if (rc) {
- raw3270_put_view(&tp->view);
- return rc;
- }
-
+ tty_port_install(&tp->port, driver, tty);
tty->driver_data = tp;
return 0;
diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index fa0dd42..5134019 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -1064,27 +1064,21 @@ static void fwtty_cleanup(struct tty_struct *tty)
static int fwtty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct fwtty_port *port = fwtty_port_get(tty->index);
- int err;
- err = tty_standard_install(driver, tty);
- if (!err)
- tty->driver_data = port;
- else
- fwtty_port_put(port);
- return err;
+ tty_standard_install(driver, tty);
+ tty->driver_data = port;
+
+ return 0;
}
static int fwloop_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct fwtty_port *port = fwtty_port_get(table_idx(tty->index));
- int err;
- err = tty_standard_install(driver, tty);
- if (!err)
- tty->driver_data = port;
- else
- fwtty_port_put(port);
- return err;
+ tty_standard_install(driver, tty);
+ tty->driver_data = port;
+
+ return 0;
}
static int fwtty_write(struct tty_struct *tty, const unsigned char *buf, int c)
diff --git a/drivers/staging/gdm724x/gdm_tty.c b/drivers/staging/gdm724x/gdm_tty.c
index 6e81369..d6348df 100644
--- a/drivers/staging/gdm724x/gdm_tty.c
+++ b/drivers/staging/gdm724x/gdm_tty.c
@@ -62,6 +62,7 @@ static int gdm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
return -ENODEV;
mutex_lock(&gdm_table_lock);
+
gdm = gdm_table[ret][tty->index];
if (!gdm) {
mutex_unlock(&gdm_table_lock);
@@ -69,15 +70,9 @@ static int gdm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
}
tty_port_get(&gdm->port);
-
- ret = tty_standard_install(driver, tty);
- if (ret) {
- tty_port_put(&gdm->port);
- mutex_unlock(&gdm_table_lock);
- return ret;
- }
-
+ tty_standard_install(driver, tty);
tty->driver_data = gdm;
+
mutex_unlock(&gdm_table_lock);
return 0;
diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
index 8a00632..182155b 100644
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus/uart.c
@@ -393,21 +393,15 @@ static void release_minor(struct gb_tty *gb_tty)
static int gb_tty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct gb_tty *gb_tty;
- int retval;
gb_tty = get_gb_by_minor(tty->index);
if (!gb_tty)
return -ENODEV;
- retval = tty_standard_install(driver, tty);
- if (retval)
- goto error;
-
+ tty_standard_install(driver, tty);
tty->driver_data = gb_tty;
+
return 0;
-error:
- tty_port_put(&gb_tty->port);
- return retval;
}
static int gb_tty_open(struct tty_struct *tty, struct file *file)
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 5414c4a..13fad62 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -329,7 +329,6 @@ static void hvc_unthrottle(struct tty_struct *tty)
static int hvc_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct hvc_struct *hp;
- int rc;
/* Auto increments kref reference if found. */
hp = hvc_get_by_index(tty->index);
@@ -337,11 +336,9 @@ static int hvc_install(struct tty_driver *driver, struct tty_struct *tty)
return -ENODEV;
tty->driver_data = hp;
+ tty_port_install(&hp->port, driver, tty);
- rc = tty_port_install(&hp->port, driver, tty);
- if (rc)
- tty_port_put(&hp->port);
- return rc;
+ return 0;
}
/*
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index cb4db1b..4dfa70c 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1140,16 +1140,10 @@ static int hvcs_install(struct tty_driver *driver, struct tty_struct *tty)
goto err_put;
}
- retval = tty_port_install(&hvcsd->port, driver, tty);
- if (retval)
- goto err_irq;
+ tty_port_install(&hvcsd->port, driver, tty);
return 0;
-err_irq:
- spin_lock_irqsave(&hvcsd->lock, flags);
- vio_disable_interrupts(hvcsd->vdev);
- spin_unlock_irqrestore(&hvcsd->lock, flags);
- free_irq(irq, hvcsd);
+
err_put:
tty_port_put(&hvcsd->port);
diff --git a/drivers/tty/mips_ejtag_fdc.c b/drivers/tty/mips_ejtag_fdc.c
index 4c1cd49..33e06b4 100644
--- a/drivers/tty/mips_ejtag_fdc.c
+++ b/drivers/tty/mips_ejtag_fdc.c
@@ -763,7 +763,9 @@ static int mips_ejtag_fdc_tty_install(struct tty_driver *driver,
struct mips_ejtag_fdc_tty *priv = driver->driver_state;
tty->driver_data = &priv->ports[tty->index];
- return tty_port_install(&priv->ports[tty->index].port, driver, tty);
+ tty_port_install(&priv->ports[tty->index].port, driver, tty);
+
+ return 0;
}
static int mips_ejtag_fdc_tty_open(struct tty_struct *tty, struct file *filp)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 86b7e20..c52fa2d 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2917,7 +2917,6 @@ static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty)
unsigned int line = tty->index;
unsigned int mux = line >> 6;
bool alloc = false;
- int ret;
line = line & 0x3F;
@@ -2949,14 +2948,8 @@ static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty)
mutex_unlock(&gsm->mutex);
return -ENOMEM;
}
- ret = tty_port_install(&dlci->port, driver, tty);
- if (ret) {
- if (alloc)
- dlci_put(dlci);
- mutex_unlock(&gsm->mutex);
- return ret;
- }
+ tty_port_install(&dlci->port, driver, tty);
dlci_get(dlci);
dlci_get(gsm->dlci[0]);
mux_get(gsm);
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index fed820e..479583d 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1555,13 +1555,11 @@ static int ntty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct port *port = get_port_by_tty(tty);
struct nozomi *dc = get_dc_by_tty(tty);
- int ret;
if (!port || !dc || dc->state != NOZOMI_STATE_READY)
return -ENODEV;
- ret = tty_standard_install(driver, tty);
- if (ret == 0)
- tty->driver_data = port;
- return ret;
+ tty_standard_install(driver, tty);
+ tty->driver_data = port;
+ return 0;
}
static void ntty_cleanup(struct tty_struct *tty)
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index 4029272..ed8f806 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -234,7 +234,6 @@ static const struct tty_port_operations kgdb_nmi_tty_port_ops = {
static int kgdb_nmi_tty_install(struct tty_driver *drv, struct tty_struct *tty)
{
struct kgdb_nmi_tty_priv *priv;
- int ret;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -245,17 +244,9 @@ static int kgdb_nmi_tty_install(struct tty_driver *drv, struct tty_struct *tty)
tty_port_init(&priv->port);
priv->port.ops = &kgdb_nmi_tty_port_ops;
tty->driver_data = priv;
+ tty_port_install(&priv->port, drv, tty);
- ret = tty_port_install(&priv->port, drv, tty);
- if (ret) {
- pr_err("%s: can't install tty port: %d\n", __func__, ret);
- goto err;
- }
return 0;
-err:
- tty_port_destroy(&priv->port);
- kfree(priv);
- return ret;
}
static void kgdb_nmi_tty_cleanup(struct tty_struct *tty)
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index fbdf4d0..6e7e4d6 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -3355,8 +3355,9 @@ static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty)
if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
return -ENODEV;
tty->driver_data = info;
+ tty_port_install(&info->port, driver, tty);
- return tty_port_install(&info->port, driver, tty);
+ return 0;
}
/* mgsl_open()
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 1e4d5b9..2d99a5b 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -734,8 +734,9 @@ static int install(struct tty_driver *driver, struct tty_struct *tty)
}
tty->driver_data = info;
+ tty_port_install(&info->port, driver, tty);
- return tty_port_install(&info->port, driver, tty);
+ return 0;
}
/* Called when a port is opened. Init and enable port.
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 32bc3e3..b01cec8 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1196,13 +1196,12 @@ void tty_init_termios(struct tty_struct *tty)
}
EXPORT_SYMBOL_GPL(tty_init_termios);
-int tty_standard_install(struct tty_driver *driver, struct tty_struct *tty)
+void tty_standard_install(struct tty_driver *driver, struct tty_struct *tty)
{
tty_init_termios(tty);
tty_driver_kref_get(driver);
tty->count++;
driver->ttys[tty->index] = tty;
- return 0;
}
EXPORT_SYMBOL_GPL(tty_standard_install);
@@ -1221,8 +1220,11 @@ EXPORT_SYMBOL_GPL(tty_standard_install);
static int tty_driver_install_tty(struct tty_driver *driver,
struct tty_struct *tty)
{
- return driver->ops->install ? driver->ops->install(driver, tty) :
- tty_standard_install(driver, tty);
+ if (driver->ops->install)
+ return driver->ops->install(driver, tty);
+
+ tty_standard_install(driver, tty);
+ return 0;
}
/**
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 25d7368..fd8d40d 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -656,11 +656,11 @@ EXPORT_SYMBOL(tty_port_close);
* to a concrete tty specified by @tty. Use this or tty_port_register_device
* (or both). Call tty_port_link_device as a last resort.
*/
-int tty_port_install(struct tty_port *port, struct tty_driver *driver,
+void tty_port_install(struct tty_port *port, struct tty_driver *driver,
struct tty_struct *tty)
{
tty->port = port;
- return tty_standard_install(driver, tty);
+ tty_standard_install(driver, tty);
}
EXPORT_SYMBOL_GPL(tty_port_install);
diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c
index 58b454c..ce32631 100644
--- a/drivers/tty/vcc.c
+++ b/drivers/tty/vcc.c
@@ -987,7 +987,6 @@ static int vcc_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct vcc_port *port_vcc;
struct tty_port *port_tty;
- int ret;
if (unlikely(!tty)) {
pr_err("VCC: install: Invalid TTY handle\n");
@@ -997,9 +996,7 @@ static int vcc_install(struct tty_driver *driver, struct tty_struct *tty)
if (tty->index >= VCC_MAX_PORTS)
return -EINVAL;
- ret = tty_standard_install(driver, tty);
- if (ret)
- return ret;
+ tty_standard_install(driver, tty);
port_tty = kzalloc(sizeof(struct tty_port), GFP_KERNEL);
if (!port_tty)
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 5f1183b..cc72254 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3222,10 +3222,7 @@ static int con_install(struct tty_driver *driver, struct tty_struct *tty)
goto unlock;
}
- ret = tty_port_install(&vc->port, driver, tty);
- if (ret)
- goto unlock;
-
+ tty_port_install(&vc->port, driver, tty);
tty->driver_data = vc;
vc->port.tty = tty;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 27346d6..de6a27e 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -572,23 +572,15 @@ static void acm_softint(struct work_struct *work)
static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct acm *acm;
- int retval;
acm = acm_get_by_minor(tty->index);
if (!acm)
return -ENODEV;
- retval = tty_standard_install(driver, tty);
- if (retval)
- goto error_init_termios;
-
+ tty_standard_install(driver, tty);
tty->driver_data = acm;
return 0;
-
-error_init_termios:
- tty_port_put(&acm->port);
- return retval;
}
static int acm_tty_open(struct tty_struct *tty, struct file *filp)
diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c
index aff79ff..18d661c 100644
--- a/drivers/usb/host/xhci-dbgtty.c
+++ b/drivers/usb/host/xhci-dbgtty.c
@@ -174,8 +174,9 @@ static int dbc_tty_install(struct tty_driver *driver, struct tty_struct *tty)
struct dbc_port *port = driver->driver_state;
tty->driver_data = port;
+ tty_port_install(&port->port, driver, tty);
- return tty_port_install(&port->port, driver, tty);
+ return 0;
}
static int dbc_tty_open(struct tty_struct *tty, struct file *file)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index f7aaa7f..5cfc2ca 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -192,9 +192,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
if (retval)
goto error_get_interface;
- retval = tty_standard_install(driver, tty);
- if (retval)
- goto error_init_termios;
+ tty_standard_install(driver, tty);
mutex_unlock(&serial->disc_mutex);
@@ -206,8 +204,6 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
return retval;
- error_init_termios:
- usb_autopm_put_interface(serial->interface);
error_get_interface:
module_put(serial->type->driver.owner);
error_module_get:
diff --git a/include/linux/tty.h b/include/linux/tty.h
index c56e397..63cdac1 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -556,7 +556,7 @@ extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
extern void tty_release_struct(struct tty_struct *tty, int idx);
extern int tty_release(struct inode *inode, struct file *filp);
extern void tty_init_termios(struct tty_struct *tty);
-extern int tty_standard_install(struct tty_driver *driver,
+extern void tty_standard_install(struct tty_driver *driver,
struct tty_struct *tty);
extern struct mutex tty_mutex;
@@ -688,7 +688,7 @@ extern int tty_port_close_start(struct tty_port *port,
extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
extern void tty_port_close(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
-extern int tty_port_install(struct tty_port *port, struct tty_driver *driver,
+extern void tty_port_install(struct tty_port *port, struct tty_driver *driver,
struct tty_struct *tty);
extern int tty_port_open(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index 5e44d84..b654420 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -710,7 +710,6 @@ static int rfcomm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct rfcomm_dev *dev;
struct rfcomm_dlc *dlc;
- int err;
dev = rfcomm_dev_get(tty->index);
if (!dev)
@@ -725,11 +724,7 @@ static int rfcomm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
set_bit(RFCOMM_TTY_ATTACHED, &dev->flags);
/* install the tty_port */
- err = tty_port_install(&dev->port, driver, tty);
- if (err) {
- rfcomm_tty_cleanup(tty);
- return err;
- }
+ tty_port_install(&dev->port, driver, tty);
/* take over the tty_port reference if the port was created with the
* flag RFCOMM_RELEASE_ONHUP. This will force the release of the port
--
2.7.4
^ permalink raw reply related
* Re: [PATCH V2 1/2] tty: serial: imx: add lock for registers save/restore
From: Uwe Kleine-König @ 2018-09-05 5:54 UTC (permalink / raw)
To: Anson Huang; +Cc: gregkh, jslaby, linux-serial, linux-kernel, Linux-imx
In-Reply-To: <1536110667-23530-1-git-send-email-Anson.Huang@nxp.com>
Hello,
On Wed, Sep 05, 2018 at 09:24:26AM +0800, Anson Huang wrote:
> In noirq suspend/resume stage with no_console_suspend enabled,
> imx_uart_console_write() may be called to print out log_buf
> message by printk(), so there will be race condition between
> imx_uart_console_write() and imx_uart_save/restore_context(),
> need to add lock to protect the registers save/restore operations.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> drivers/tty/serial/imx.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 239c0fa..c15332d 100644
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Thanks
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply
* Re: [PATCH V2 2/2] tty: serial: imx: add pinctrl sleep/default mode switch for suspend
From: Uwe Kleine-König @ 2018-09-05 5:55 UTC (permalink / raw)
To: Anson Huang; +Cc: gregkh, jslaby, linux-serial, linux-kernel, Linux-imx
In-Reply-To: <1536110667-23530-2-git-send-email-Anson.Huang@nxp.com>
On Wed, Sep 05, 2018 at 09:24:27AM +0800, Anson Huang wrote:
> On some i.MX SoCs' low power mode, such as i.MX7D's LPSR(low power
> state retention), UART iomux settings will be lost, need to add
> pinctrl sleep/default mode switch during suspend/resume to make
> sure UART iomux settings are correct after resume.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply
* Re: [PATCH 01/25] tty: Change return type to void
From: Jiri Slaby @ 2018-09-05 5:57 UTC (permalink / raw)
To: Jaejoong Kim, sergei.shtylyov
Cc: devel, Greg KH, linux-um, greybus-dev, linuxppc-dev,
linux-bluetooth, LKML, linux-mmc, linux-s390, linux-serial,
USB list, netdev, sparclinux
In-Reply-To: <CAL6iAaKzDPe7CMGR8VOBZRsJqZuNB1=zek_YVvwcKnjimbox2g@mail.gmail.com>
On 09/05/2018, 03:08 AM, Jaejoong Kim wrote:
> > @@ -688,7 +688,7 @@ extern int tty_port_close_start(struct
> tty_port *port,
> > extern void tty_port_close_end(struct tty_port *port, struct
> tty_struct *tty);
> > extern void tty_port_close(struct tty_port *port,
> > struct tty_struct *tty, struct file
> *filp);
> > -extern int tty_port_install(struct tty_port *port, struct
> tty_driver *driver,
> > +extern void tty_port_install(struct tty_port *port, struct
> tty_driver *driver,
> > struct tty_struct *tty);
>
> You need to update all the callers in the same patch -- the
> kernel must
> remain buildable after each patch but you seem to have spread that
> update
> among a lot of patches..
>
>
> OK. I will make several patches as one patch.
You don't have to. Just reorder the patches as suggested by Sam. (First,
make everybody ignore the return value, then change these return types
to void.)
BTW you can mention in this commit log, that this change is possible
after a3123fd0a4a5. That commit made tty_standard_install to always
return 0.
thanks,
--
js
suse labs
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox