From: Haitao Huang <haitao.huang@linux.intel.com>
To: jarkko@kernel.org, dave.hansen@linux.intel.com,
linux-sgx@vger.kernel.org
Cc: kai.huang@intel.com, reinette.chatre@intel.com
Subject: [PATCH v3 23/28] selftests/sgx: Retry the ioctl()'s returned with EAGAIN
Date: Wed, 12 Jul 2023 16:01:57 -0700 [thread overview]
Message-ID: <20230712230202.47929-24-haitao.huang@linux.intel.com> (raw)
In-Reply-To: <20230712230202.47929-1-haitao.huang@linux.intel.com>
For EMODT and EREMOVE ioctl()'s with a large range, kernel
may not finish in one shot and return EAGAIN error code
and count of bytes of EPC pages on that operations are
finished successfully.
Change the unclobbered_vdso_oversubscribed_remove test
to rerun the ioctl()'s in a loop, updating offset and length
using the byte count returned in each iteration.
Fixes: 6507cce561b4 ("selftests/sgx: Page removal stress test")
Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
---
tools/testing/selftests/sgx/main.c | 42 ++++++++++++++++++++++++------
1 file changed, 34 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c
index 9820b3809c69..59cca806eda1 100644
--- a/tools/testing/selftests/sgx/main.c
+++ b/tools/testing/selftests/sgx/main.c
@@ -390,6 +390,7 @@ TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900)
struct encl_segment *heap;
unsigned long total_mem;
int ret, errno_save;
+ unsigned long count;
unsigned long addr;
unsigned long i;
@@ -453,16 +454,30 @@ TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900)
modt_ioc.offset = heap->offset;
modt_ioc.length = heap->size;
modt_ioc.page_type = SGX_PAGE_TYPE_TRIM;
-
+ count = 0;
TH_LOG("Changing type of %zd bytes to trimmed may take a while ...",
heap->size);
- ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc);
- errno_save = ret == -1 ? errno : 0;
+ do {
+ ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc);
+
+ errno_save = ret == -1 ? errno : 0;
+ if (errno_save != EAGAIN)
+ break;
+
+ EXPECT_EQ(modt_ioc.result, 0);
+
+ count += modt_ioc.count;
+ modt_ioc.offset += modt_ioc.count;
+ modt_ioc.length -= modt_ioc.count;
+ modt_ioc.result = 0;
+ modt_ioc.count = 0;
+ } while (modt_ioc.length != 0);
EXPECT_EQ(ret, 0);
EXPECT_EQ(errno_save, 0);
EXPECT_EQ(modt_ioc.result, 0);
- EXPECT_EQ(modt_ioc.count, heap->size);
+ count += modt_ioc.count;
+ EXPECT_EQ(count, heap->size);
/* EACCEPT all removed pages. */
addr = self->encl.encl_base + heap->offset;
@@ -490,15 +505,26 @@ TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900)
remove_ioc.offset = heap->offset;
remove_ioc.length = heap->size;
-
+ count = 0;
TH_LOG("Removing %zd bytes from enclave may take a while ...",
heap->size);
- ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_REMOVE_PAGES, &remove_ioc);
- errno_save = ret == -1 ? errno : 0;
+ do {
+ ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_REMOVE_PAGES, &remove_ioc);
+
+ errno_save = ret == -1 ? errno : 0;
+ if (errno_save != EAGAIN)
+ break;
+
+ count += remove_ioc.count;
+ remove_ioc.offset += remove_ioc.count;
+ remove_ioc.length -= remove_ioc.count;
+ remove_ioc.count = 0;
+ } while (remove_ioc.length != 0);
EXPECT_EQ(ret, 0);
EXPECT_EQ(errno_save, 0);
- EXPECT_EQ(remove_ioc.count, heap->size);
+ count += remove_ioc.count;
+ EXPECT_EQ(count, heap->size);
}
TEST_F(enclave, clobbered_vdso)
--
2.25.1
next prev parent reply other threads:[~2023-07-12 23:03 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-12 23:01 [PATCH v3 00/28] Add Cgroup support for SGX EPC memory Haitao Huang
2023-07-12 23:01 ` [PATCH v3 01/28] x86/sgx: Store struct sgx_encl when allocating new VA pages Haitao Huang
2023-07-17 11:14 ` Jarkko Sakkinen
2023-07-12 23:01 ` [PATCH v3 02/28] x86/sgx: Add EPC page flags to identify owner type Haitao Huang
2023-07-17 12:41 ` Jarkko Sakkinen
2023-07-17 12:43 ` Jarkko Sakkinen
2023-07-12 23:01 ` [PATCH v3 03/28] x86/sgx: Add 'struct sgx_epc_lru_lists' to encapsulate lru list(s) Haitao Huang
2023-07-17 12:45 ` Jarkko Sakkinen
2023-07-17 13:23 ` Haitao Huang
2023-07-17 14:39 ` Jarkko Sakkinen
2023-07-24 10:04 ` Huang, Kai
2023-07-24 14:55 ` Haitao Huang
2023-07-24 23:31 ` Huang, Kai
2023-07-31 20:35 ` Haitao Huang
2023-07-12 23:01 ` [PATCH v3 04/28] x86/sgx: Use sgx_epc_lru_lists for existing active page list Haitao Huang
2023-07-17 12:47 ` Jarkko Sakkinen
2023-07-31 20:43 ` Haitao Huang
2023-07-12 23:01 ` [PATCH v3 05/28] x86/sgx: Store reclaimable epc pages in sgx_epc_lru_lists Haitao Huang
2023-07-12 23:01 ` [PATCH v3 06/28] x86/sgx: store unreclaimable EPC " Haitao Huang
2023-07-12 23:01 ` [PATCH v3 07/28] x86/sgx: Introduce EPC page states Haitao Huang
2023-07-12 23:01 ` [PATCH v3 08/28] x86/sgx: Introduce RECLAIM_IN_PROGRESS state Haitao Huang
2023-07-12 23:01 ` [PATCH v3 09/28] x86/sgx: Use a list to track to-be-reclaimed pages Haitao Huang
2023-07-12 23:01 ` [PATCH v3 10/28] x86/sgx: Allow reclaiming up to 32 pages, but scan 16 by default Haitao Huang
2023-07-12 23:01 ` [PATCH v3 11/28] x85/sgx: Return the number of EPC pages that were successfully reclaimed Haitao Huang
2023-07-29 12:47 ` Pavel Machek
2023-07-31 11:10 ` Jarkko Sakkinen
2023-07-12 23:01 ` [PATCH v3 12/28] x86/sgx: Add option to ignore age of page during EPC reclaim Haitao Huang
2023-07-12 23:01 ` [PATCH v3 13/28] x86/sgx: Prepare for multiple LRUs Haitao Huang
2023-07-12 23:01 ` [PATCH v3 14/28] x86/sgx: Expose sgx_reclaim_pages() for use by EPC cgroup Haitao Huang
2023-07-12 23:01 ` [PATCH v3 15/28] x86/sgx: Add helper to grab pages from an arbitrary EPC LRU Haitao Huang
2023-07-12 23:01 ` [PATCH v3 16/28] x86/sgx: Add EPC OOM path to forcefully reclaim EPC Haitao Huang
2023-07-12 23:01 ` [PATCH v3 17/28] x86/sgx: fix a NULL pointer Haitao Huang
2023-07-17 12:48 ` Jarkko Sakkinen
2023-07-17 12:49 ` Jarkko Sakkinen
2023-07-17 13:14 ` Haitao Huang
2023-07-17 14:33 ` Jarkko Sakkinen
2023-07-17 15:49 ` Dave Hansen
2023-07-17 18:49 ` Haitao Huang
2023-07-17 18:52 ` Jarkko Sakkinen
2023-07-12 23:01 ` [PATCH v3 18/28] cgroup/misc: Fix an overflow Haitao Huang
2023-07-17 13:15 ` Jarkko Sakkinen
2023-07-12 23:01 ` [PATCH v3 19/28] cgroup/misc: Add per resource callbacks for CSS events Haitao Huang
2023-07-17 13:16 ` Jarkko Sakkinen
2023-07-12 23:01 ` [PATCH v3 20/28] cgroup/misc: Add SGX EPC resource type and export APIs for SGX driver Haitao Huang
2023-07-12 23:01 ` [PATCH v3 21/28] x86/sgx: Limit process EPC usage with misc cgroup controller Haitao Huang
2023-07-13 0:03 ` Randy Dunlap
2023-08-17 15:12 ` Mikko Ylinen
2023-07-12 23:01 ` [PATCH v3 22/28] Docs/x86/sgx: Add description for cgroup support Haitao Huang
2023-07-13 0:10 ` Randy Dunlap
2023-07-14 20:01 ` Haitao Huang
2023-07-14 20:26 ` Haitao Huang
2023-08-17 15:18 ` Mikko Ylinen
2023-07-12 23:01 ` Haitao Huang [this message]
2023-07-12 23:01 ` [PATCH v3 24/28] selftests/sgx: Move ENCL_HEAP_SIZE_DEFAULT to main.c Haitao Huang
2023-07-12 23:01 ` [PATCH v3 25/28] selftests/sgx: Use encl->encl_size in sigstruct.c Haitao Huang
2023-07-12 23:02 ` [PATCH v3 26/28] selftests/sgx: Include the dynamic heap size to the ELRANGE calculation Haitao Huang
2023-07-12 23:02 ` [PATCH v3 27/28] selftests/sgx: Add SGX selftest augment_via_eaccept_long Haitao Huang
2023-07-12 23:02 ` [PATCH v3 28/28] selftests/sgx: Add scripts for epc cgroup testing Haitao Huang
2023-07-17 11:02 ` [PATCH v3 00/28] Add Cgroup support for SGX EPC memory Jarkko Sakkinen
2023-07-24 19:09 ` Sohil Mehta
2023-07-25 17:16 ` Haitao Huang
2023-08-17 15:04 ` Mikko Ylinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230712230202.47929-24-haitao.huang@linux.intel.com \
--to=haitao.huang@linux.intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=jarkko@kernel.org \
--cc=kai.huang@intel.com \
--cc=linux-sgx@vger.kernel.org \
--cc=reinette.chatre@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox